HU Issue in EWM

Dear all,
The Inbound delivery has done of 39 pcs but actually received qty is 40 pcs.
So now delivery has been changed to 40 pcs
Therefore, the "extra package" had to insert in a new Handling unit
50017556.
during the location of this unique Handling unit, the handheld gives the
following message\statement "It was not possible to find the HU required".
As the supply and the other Hus were closed correctly without any type of problem.
So now how to create a new handling unit for that remaining 1 pcs  ????
Your help is highly appreciated
Regards,
Rock

Hi Ramlal.
This issue is due to HU NO range in EWM. Check have you maintained ERP HU Number range as external number range in EWM.
So that when you send HU from ERP then EWM will take as external number range.
As your non HU del is going good then all issue is due to HU NR.
Regards
Suraj

Similar Messages

  • GR Issue in EWM

    Dear all,
    I am unable to do GR in T.code /n/scwm/prdi it display below error:
    Message no. /SCWM/GOODS_MOVEMENT025
    So please help me out.
    Regards,
    Rock

    Thank Juergen.Yes, did not putway.
    In the  inbound delivery notification, I use "Activate",but it show message:
    Version is already Active; activity "Set Version to Active" not
    executed
    Message no. /SCDL/AF039

  • Issue in confirmation of putaway WT with Serial No

    I have a serial no managed material. ERP IBD created with manually entered SNs.  EWM IDN and ID are created.
    ID item details has the SNs which I entered in ERP IBD.  Putaway WT was automatically created.
    While confirming the WT, when I select Serial Numbers Actual button, it shows up the SNs I desired.
    I just select these 2 SNs and proceed for confirm+save, system gives me the error as follows.
    what is issue with the serial no?  I checked /SCWM/SERH.. it has not any entries created yet.
    Thanks.

    This has got solved. I could confirm the WT without making any changes during confirmation.
    But I have another issue, the EWM serial no profile maintained in ERP(WM execution tab) and the one in product master is ZH01.  This profile has the no range object which should has no range as shown in the screnshots above.   also automatic numbering is set. 
    the SNs entered in the scenario in the screenshots were manual ones during IBD creation in ERP.  Those were not automatically created.  When I had used the create automatically option during IBD creation in ERP, system took the no range  starting with 1 and continued with 2, 3, 4 for the next items.
    I could overwrite these automatic no.s by absolutely any value(alphanumeric) which was accepted as a SN in ERP and even in EWM during following putaway activities.
    Current serial no.s in EWM are as below. 1 & 2 are automatic ones.. others were manually entered during IBD creation in ERP.
    I am not able to find what is the source of this automatic 1, 2, 3, 4 .... no range.  and why the system is  not considering the no range maintained  with no.range object assigned to the serial profile ZH01.(below).
    above two settings are same in ERP and EWM at respective IMG nodes. 
    i have checked the no range maintained for equipment M under PM module in IMG.
    it has a no range which gets increamented as SNs are created in the system,  but that no range does not match with the one which is automatic 1,2, 3, 4,..  That no range works just a system count internally.

  • EWM-ERP movement type integration

    Hi,
    We have EWM 7.0 integrated with ECC 6.0.
    When I Post Unplanned Goods Issue in EWM with GI process = SCRP (scrapping), I expect to post 551 movement in ECC.
    However this doesn't happen.
    On analyzing the inbound queue in ECC 6.0, it is found "reason code" is set as mandatory to post movement 551 in ECC.
    Can any one tell how to send the reason code from EWM to ECC ?
    Thankyou in advance.
    Best regards

    hi,
    you need to check SAP note 1408478 for more detail how to send this reason code back to ERP.

  • EWM and ECC delivery status

    Dear, all, During implementation of SAP EWM, we face with process which required interaction integration of statuses with ERP Sales order and Outbound delivery, but in standard EWM scenario this integration possible only via  goods issue and EWM outbound delivery or with IDOC in outbound transports, but we don’t use outbound transport and statuses we need before goods issue, any experiences in such processes?
    Scenario:
    1. Manager create Sales Order and delivery in ECC
    2. Warehouse pick and pack goods, in real time we need transfer statuses to ECC from EWM by each position.
    3. Based on statuses manager correct Sales order and issue Invoice for customer, or replace missing position by creating new delivery in ECC for the same Sales order;
    Thx in advance!

    Hi Andrey,
    This can be achieved by status management of  SAP EWM PPF action. check on delivery type , check FM for status management., check save replica FM, apply logic to update ECC for any change of del line item and header for your new status.
    and denials to short close can be done from EWM. and then you can cerate new del as proper obd is updated with actuals
    Regards
    Suraj

  • EWM : Error message in the in Inbound Queue

    During the creation of Inbound delivery in EWM through QRFC..the queue is stuck with an error message
    " Error accessing product data administration "Message no. /SCDL/AF032""..Please let me know if you have seen this issue earlier.
    ECC: Inbound delivery is created
    QRFC: Stuck in the queue and error message can be seen through SMQ2 transaction
    EWM: No IBN created because of the errored queue
    Thanks,
    Syed Ismail
    PS: Is there a way to create a new section for EWM queries so that they do not get mixed up with regular WM issues ?

    Thank you for your reply. The views are extended and i did look at the SCU set up and they seem to be good. Actually the scenario is that we had a system where all these processes were working fine in a client. A client copy was made to a new system and i am facing issues simulating in the new client.
    I faced an issue in the new system where the function module to create IDN and ID itself was not getting determined and it was because of logical system issue in EWM>Interfaces>ERP Integration>Goods movement>Map storage locations ERP and EWM..I have corrected and the queue gets processed now but i run into this new error.
    Will investigate a little more and see how it goes...
    I have checked out different settings but i was still not able to fid a solution..Did anybody see this kind of message earlier ?

  • Material 18pos vs Material_External 40pos - /SCWM/OUTB_DLV_SAVEREPLICA

    Hello Experts.
    Currently I am facing an issue with EWM 7.01. The main issue is when I am creating the Outbound delivery Requet with function module /SCWM/OUTB_DLV_SAVEREPLICA and the field ITEM_DATA-MATERIAL is not supporting materials with more than 18 positions, so for this reason we are using the field ITEM_DATA-MATERIAL_EXTERNAL instead of field MATERIAL. So I have the following scenarios.
    When the function module use:
    1) The field MATERIAL_EXTERNAL has a material number with more than 18pos and the field MATERIAL is in blank==> Result: the Oubbound delivery Request (ODR) is created but  the fields in the document have
        a) PRODUCT = In blank
        b) PRODUCT EXTERNAL = "&IO        1"
    2) The field MATERIAL_EXTERNAL has a material number with more than 18pos and the field MATERIAL has the material number with 18pos==> the Oubbound delivery Request (ODR) is created but  the fields in the document are filled but the field PRODUCT is trunked.
        a) PRODUCT = more than 18pos
        b) PRODUCT EXTERNAL = "&IO        just 18pos.
    at the end the ODR is created but it has inactive status and I can not create the next document (ODO).
    Please help me, any idea is welcome.
    Best Regards.
    Victor Calderón.

    Hi Madhu.
    if you work in ECC or ERP/3 you are correct there the lenght of the material has 18pos, but if you work on SCM (EWM or SPP) there the product has 40pos.
    In this case the EWM is connected with a legacy system which support 40pos.
    Best Regards.
    Victor Calderón.

  • Goods receipt and post goods issue are not updated back from EWM to ECC

    Hi Experts,
    Would anybody able to tell me the setting to be modified / defined to backward flow of information from EWM to ERP i.e. the goods receipt, goods issue are not being updated back in ECC once the goods receipt and  post goods issue are posted in EWM?
    It would be great help if i get the response as early as possible.
    Chakrapani Das

    Hi Chakrapani,
    You might want to try checking the customization on the SCM part following this path:
    SPRO - Extended Warehouse Management - Interfaces - ERP Integration - General Settings
    Pay special attention on the Check of ERP-EWM Configuration transaction.
    After you have checked these you should probably check the outbound queue monitor (tx SMQ1) from EWM to ERP. You can use the SMQ1 - Outbound queue and SMQ2 - Inbound Queue both in ERP and SCM to check the communication betweene these two systems.
    Also you may want to checkt the SLG1 - Analyse application Log in SCM in order to see if any internal bugs exist.
    All the best,
    Claudiu Maxim

  • EWM CIF Integration Model master data transfer Issue

    Hi Gurus,
    I am not able to transfer the master data from ERP to EWM.
    When I excecute the transaction CFM1 and CFM2 integration model ,the material is not getting transferred.
    I am getting the below mentioned Error message.
    "Location does not exist for external location 9997, type 1040, and BSG CSSCMDEV"
    Please help me in resolving this issue.
    Regards
    Govind

    Hi,
    Thanks for the reply
    I had created the location 9997 for the location type 1001earlier.
    When I tried to delete the location and create new Location for Location type 1040.System is not allowing me to delete.Please let me know how to delete the existing Location.
    Regards
    Govind

  • EWM Inspection Rule issue

    Hello,
    I'm currently building a SAP EWM demo, and am now busy with the returns from customer scenario.
    I'm trying to create a Inspection Rule to handle these returns. I've made the necessary settings in customizing for Quality Management.
    However, when I try to create an inspection rule, the system displays the following error:
    Property LGNUM is not defined in the inspection object type
    Does anyone know how to define the LGNUM (Warehouse number) in the inspection object type?
    Thanks & regards,
    Oliver

    Hi,
    FYI: The issue has been resolved, the following customizing needed to be maintained:
    Extended Warehouse Management -> Cross-Process Settings -> Quality Management ->
    1. Settings for Inspection Rules -> Define Item Types - Here you can add the 'LGNUM'
    2. Basics -> Define Indexes for QIE objects - Please also add the property 'LGNUM'
    Regards,
    Oliver

  • EWM RF Programming Issue - Adding a field to screen

    I am facing a development issue and thought may be some of you could help me with it.  I have added a new field (Country of Origin) in - /scwm/rfui - > 03 Inbound Process - >04 Receiving of Handling Units - >01 -> Rec of HU by Delivery in screen 302 by converting it to 900 using the Wizard.  I am good unto this point.
    Here is where I am facing difficulty.
    1. How do I make this field required field? I have set up the checkbox in the screen attributes. However, until I do this in 'Verification', its not going to be effective. I couldn't find a way to add this to /SCWM/TVALID_PRF. Can you please suggest.
         I also noticed that all the fields in this screen are from structure /SCWM/S_RF_REHU_PROD. Since Country of Origin is not part of this sturcture, I have pulled this field using the Wizard from Table /SCWM/S_SP_A_ITEM_PRDI. Is that the right thing to do?
    2. Once I make it a required field, how do I put the logic to populate the logic to capture this entry from the RF screen and populate it into the eWM database.
    I would greatly appreciate if you could give me some guidance.
    Regards,
    Bharat
    I would like to rephrase the question by asking has any EWM RF guru come across the requirement to make a new field mandatory on the RF screen and secondly how /where was the logic written to capture the value entered on the RF Screen to be saved.
    Hopefully someone can guide me with eWM RF screen modif.
    Thanks,
    Bharat
    Message was edited by: Brad Khambampati

    Hi Brad,
    Please refer the above link.
    Page Number : 46 (to activate the required field attribute for the given field)
    /scwm/cl_rf_bll_srvc=>set_screlm_required_on(‘/SCWM/S_
    RF_PICKPT-VLPLA’)

  • EWM Opportunistic Cross Docking issue - Its put away instead of 2121 - Pick

    Hi
    We have checked all settings, configuration for Opportunistics cross docking - EWM (SCM) set up.
    Storage type search sequence, activity type, WPT etc
    But while performing following steps we are facing the issue :
    1: We create PO in ERP
    2: Inb delivery in ERP
    3: Read Inb del in EWM - PRDI
    4: Perform Follow on task - WT creation and SAVE
    5: Create Sales order and outb del in ERP
    6: Read the docu in SCM - EWM
    5: See MOnitor - for Inbound delivery status is Put away
    Outbound SHOULD HAVE BEEN 2121 (WPT) with PICK, but still Put away GR is already performed.
    Its 1021 instead of 2121 WPT..
    Any pointers please ?

    Jacob,
    Yes, I after I posted that message I retested and it worked as I expected.  The only downside is that any GR reversals for the production orders will go to COGI due to the fact that 901 no longer allows negative stocks, but this is not that big of a deal. 
    Thanks for confirming my thinking.
    Jeff

  • SCM EWM and ERP Connectivity issue

    Hi,
    I am getting the below error message when I check the configutation of ERP - SM EWM.Please do the need full
    Logical system is missing for business system CSSCMDEV_230 (ERP System)
    Message no. /SCWM/EEC_CHECK011
    Regards
    Govind

    by the error message it seems that RFC setting are incomplete
    Please check the RFC setting in source and destination system.

  • EWM CIF issue

    Hi experts,
    We are trying to CIF a plant from ECC to EWM. The locations master is created in EWM but no Business partner is created. We have mentioned in integration model to create both Loc master and BP. Are we missing on any setting / data ? Any pointers on this will be useful.
    Regards.

    Hi,
    check the system log for the error in SCM using SLG1. I am guessing it could be because of the number ranges for BPs. create an external number range which allows the BPs you are CIFfing from ERP. Hope this helps!

  • EWM: Annual Physical Inventory Issue

    Hello together!
    I'm looking for cute (use SAP default) solution for the following problem:
    For a EWM warehouse in Turkey it's possible to do Ad-hoc physical inventory for products during the year. Nevertheless it's necessary to do a complete annual physical inventory due to legal regulations. But the SAP default provides message "Storage bin XY was already inventoried in the physical inventory year" when trying to start the annual physical inventory.
    Is it possible to avoid this message and proceed the annual physical inventory? Is it possible to delete the Ad-hoc physical inventory results to be able to start the annual physical inventory? I found transaction "/SCWM/PI_COMPL_DEL" to delete completeness data sets?!?
    Thank you very much for your help!
    best regards
    Alexander

    Hi Alexander!
    When you create PI document in /SCWM/PI_DOC_CREATE set the checkbox "Include Inventoried Objects"
    BR, Alex

Maybe you are looking for