Hub V3 - Address conflict when trying to set fixed...

Within the hub GUI under devices you should be able to set the IP address each devices users everytime it connects.  However when I try to change this I ger an error message the following error message.  But when I check the DHCP table tab, no other device is using the address I specified.  Sounds like a bug in the firmware.  Is there a fix for this?
"Conflict -The IP address entered conflicts with a device using the same IP address on your home network. Please enter a different IP address."

The problem with some of the home hubs, is that they fail to release addresses allocated by DHCP, even after the lease expires.
You can sometimes get round the problem by deleting the device from the devices list.
You can change the DHCP range if you wish, to suit your purpose.
http://bt.custhelp.com/app/answers/detail/a_id/901​1/~/how-do-i-change-the-dhcp-settings-of-the-bt-ho​...
I am surprised that there is no way to change the network settings on the PC, so it does not use DHCP. This requirement would be needed in many commercial IT networks, where devices are given specific IP addresses, which are often printed on a label, and stuck to the device.
You can change the network settings of the Raspberry Pi on this link.
http://www.raspberryshake.com/raspberry-pistatic-i​p-address/
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • How do I access a keyboard to type in email address, etc. when trying to set up APPS

    I am trying to activate APPS (eprint) for my new HP 6600 All-in-1.  Need to enter email address, password,etc. to use apps such as Google Docs., Scan Receipt, ebox.  Everything is all ready to enter on the printer screen, but no keyboard is displayed.  The set-up seems complete and correct, and i can immediately print items such as the Easy (HP) forms, but do not need to add email, password, etc. to use these.
    I'm using VISTA: IE9 and Firefox (latest issue) are my browsers.  Thanks.
    PS There are no error messages:  I just can't complete the task without a characgter keyboard.
    This question was solved.
    View Solution.

    Hi @Zamona
    Welcome to the HP Support Forums.  I gather that you would like to learn how to setup printable apps on your Officejet 4632 printer.
    I have included the Getting Started with HP Printables document and the How to Access and Modify Printables Through HP Connected document.   The first document has good information regarding printables in general.  The second document will give you the steps the you are asking for.
    Please let me know the outcome.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • HT2731 when trying to set up an account why am i being asked to put a card number and billing address in? I just wanted the free apps??

    when trying to set up an account and register my ipod touch it is asking for a card number, and billing address. Why is it doing that i just want to get free apps

    Apple wants your money. Is it really that hard to figure out?
    Here's a work around.
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
      http://support.apple.com/kb/HT2534

  • When trying to set up my eprint account. I get an error message my email

    When trying to set up my eprint account. The error message is my email address is on file and I need to sign in, then when using my password, I am told I need to set up an account for the eprint center.

    The issue you're experiencing is most likely due to an old Snapfish account registered under your email address. ePrintCenter and Snapfish account information is stored in the same place and I've seen this conflict before. You will need to go to http://www.snapfish.com/snapfish/welcome, click the "Sign In" in the top right hand corner of the page and then click the "forgot password" link and enter the email address that is causing your problems, you should receive an email from Snapfish that will let you create a new password there. Once you've created a new password for Snapfish, try to Sign In on ePrintCenter (http://www.eprintcenter.com/) using your email address and the new password you created for Snapfish.
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • HT2105 Continually get a message saying "We are experiencing technical difficulties, please try later" when trying to set up allowances. Not very helpful. Any ideas. I am running the latest itunes with Windows 7 Professional.

    Continually get a message saying "We are experiencing technical difficulties, please try later" when trying to set up allowances. Not very helpful. Any ideas. I am running the latest itunes with Windows 7 Professional.

    Not a solution yet, but received the following from one of the tech people I've been e-mailing back & forth with.
    "I'm sorry that you have been unable to submit your podcast. The podcast submission form is currently offline. When trying to submit the podcast you will receive this message "We are Currently Experienced Technical Difficulties". Once the issue has been resolved, I would be glad to inform you.
    Apple is currently working toward a resolution for the issue you have reported. You will receive an email after the matter has been investigated and further information is available."
    Who knows, maybe the problem isn't with my feed after all.

  • HT1553 I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error...

    I did the back up as instructed... Installed a larger hard drive and followed the restore instructions... Now I get a white screen with a folder icon and blinking question mark. When trying to set startup with new drive I get a bless tool error... Help!!

    If you have installed a new hard drive , you will need to have formatted it in Disk Utility correctly. This may explain your problem.
    Boot  into your 10.6 Install disk again at the top menubar > Utilities > select Disk utility and in there select your new hard drive, and select the tab Erase and choose to make the format as  Mac OS Extended Journaled. When that is finished look in the main window to make sure that the partition map scheme says GUID Partition Table.
    Now go to the Restore tab and reinstall from your backup.

  • How do I populate the address book when trying to send a photo(s) by email?

    How do I populate the address book when trying to send a photo(s) by email?

    Click the Edit Contacts button, the silhouette, in the email attachments panel to bring up the contact book and enter the addresses there. In the contact book, click the new contact button to start entering the information.

  • HT201320 when trying to set up my email account, i enter add account tap in my details for my virgin media email account, after going through the veryfying, it comes back with cannot connect using ssl.

    when trying to set up my personal email account, following the on screen instructions, it comes back with CANNOT CONNECT USING SSL, do you want to try setting up the account without ssl? Yes or No

    Since Thunderbird does not run on iPads, what does this have to do with Thunderbird?

  • I have recently downloaded sentinel mobilesafe to my iphone.When trying to set it up,it asks for my phones name.What is this and where do i find it?

    Hi,I recently downloaded sentinel mobilesafe to my iphone 4s. When trying to set it up,it asks for the phones name. What is this and where do i find it? Thanks

    Thanks Clyde will try it.

  • When trying to set up automatic  syncing , on my iPod Nano, I get a notice that I am synced to another unknown computer.  How do I get unsynced from this other computer ? Have I been hacked ?

    When trying to set up automatic  syncing , on my iPod Nano, I get a notice that I am synced to another unknown computer.  How do I get unsynced from this other computer ? Have I been hacked ?

    Well, most of what we can tell you is already stated in the message you are getting.  A phone can only sync with one library at a time.  You have apparently synced your phone with a different iTunes library in the past, or changes have been made to this library so the phone no longer recognizes it as the library with which it was synced.  To know which you will have to provide the information.
    If you bought them using the AppleID you use with this phone it may simply be easier to re-download them directly to the phone rather than sync them, though you will want to resolve that issue at some point.
    Downloading (using iOS or computer) past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519

  • When trying to set up syn with outlook 2010 - it does not show as an option

    When trying to set up syn with outlook 2010 - outlook it does not show as an option

    Hi smrkevin,
    Welcome to the BlackBerry Support Community.
    What version of BlackBerry Desktop Software do you have installed? If you do not have the latest version listed here: http://bbry.lv/ds97JW I would advise upgrading it.
    If you already have the latest version of Desktop Software, can you verify if you are running a Click to Run installation of Outlook? You can check this in Outlook -> Help -> About Microsoft Outlook. If you are using a Click to Run installation, you will need to install a full version of Microsoft Outlook to setup synchronization. For more information, see: http://bbry.lv/qDIoXO
    Hope this helps.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • When trying to set up an email account I keep receiving ssl errror message. Any advice please.

    When trying to set up an email account I keep receiving ssl errror message. Any advice please.

    Error is: Cannot connect using SSL. Do you want to try setting up the account without SSL?
    Answer: Yes
    Then "Verifying" appears at top of screen but nothing happens.
    Tiscali/Talk Talk is the provider.

  • Getting error message (-3150) when trying to set up itunes home share

    getting error message (-3150) when trying to set up itunes home share

    Hey there dahliafromphiladelphia,
    If you're unable to set up Home Sharing in iTunes on your computer, then I'd like you to please follow the directions in the article below.
    Troubleshooting Home Sharing - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • TS4036 hello there, my old phone was stolen and when trying to set up the new one using icloud it says: No backups available, even though i can see my last backup saved both on the new phone and my ipad, any bright ideas please?

    My old phone was stolen and when trying to set up a new one and restoring my last backup from icloud it says: No backups available, even though i can see my last backup is saved/still there both on the new phone and my ipad, can one only restore from an earlier saved backup during the intitial set up of the phone, or are you also able to restore/pick up an older version later after is i set it up as a new phone?  is any bright ideas please?

    Did you figure this out? I'm having a similar issue.
    Thanks!

  • When trying to set up iCloud the setup manager refers to a no longer used telephone

    I am trying to setup my iCloud (keychain) on (all) my devices... "when trying to set up iCloud, the setup manager refers to a no longer used telephone number that was the old number on my iPhone". I have not used this number for over a year... and had erased and changed my number in my main account (Apple). How can I get the iCloud setup agent to (see) use the (new) latest telephone number?

    You can change the number from the device you have keychain set up on from the keychain options in the iCloud settings.

Maybe you are looking for