Huge problems with the N72.

Hello guys im here to share u my troubles.Im owner of an n72 for an year i have huge headaches from the phone.My batter goes down in 72 hours without doing anything at all.The record was today it went down in 13 hours guess from too much charging got trashed.I've been to many places ppl telling my phone is fine. So i went to some service today the guy saw it said there is nothing wrong with the phone and the Charger.What this guy said was there probably is 3g networking on and my phone is searching for it.So im from Bulgaria such thing does not exist.The guy was looking on my phones settings there isnt any way to go to normal networking like on the other phones can anyone help me ? Can i not be on 3g networking or somth dunno how to explain it.But my phone is looking for that network like mad making my batter go down fast as hell.The site of Bulgarian Nokia does not give any support it is awfull and worst site i've ever been it does not tell u where u can visit licensed nokia service or anything at all to contact them. So even if i go to the capital and visit any service if there are any i will be spending hell alot of mooney for diagnostics traveling and many many more stuffs it will cost like 70 eu lol.

Just checked the specs and whoever you took it to is speaking out of his rear end...how can it search for 3G if it just runs on GSM.
Have you tried another battery in it yet?
Message Edited by grayburn on 21-Oct-2008 04:14 PM
Message Edited by grayburn on 21-Oct-2008 04:14 PM
Message Edited by grayburn on 21-Oct-2008 04:15 PM
Grayburn @ www.nokiausers.net & www.dailymobile.se....come say Hello!!!
If you appreciate ANY help from a member,then show it by clicking on the Blue Star button, cheers

Similar Messages

Huge problem with the soundblaster products need h

Hello guys and gals,
I am now lost on what to do I have done everything to counter posting on this forum. My problem is that my sound doesn't work at all. I will put it in the story that happened below.
I was playing Counter-Strike on spring break and suddenly I lost sound. I check to see if I hit mute but I didn't. I ended checking device manager and it said I didn't have my Creative Soundblaster Audigy?LS installed. It showed up as Unknown Device in Device Manager. I tried uninstalling all the drivers and reinstalling them but It said it needs to identify the card and to make sure it's plugged in which it is. So I tried to switch PCI Slots, and that did absolutely nothing. I tried switching to my oldest dri've which had the same card drivers installed but yet no sound while saying it can't identify it. So I thought it was just the card itself. I went to go get a new one and the one I got was Creative SoundBlaster X-Fi Fatalty XtremeGamer Professional Series. I put it into my PCI Slot and it did the same exact thing. I noticed that the LS had a blue cord for the?four pin?CD thing on the motherboard. I put that into my new sound card and it popped up as MultiMedia Manager or something very close to that, I was filled with joy. So I could install my drivers for the sound card. After It was done checking I went to device manager and it was there. Then I rebooted and wasn't in there. I thought it was something with the harddri've so I reformatted another dri've and installed windows on it and everything. It let me install the drivers and it showed up in the sound, and audio devices as Creative Soundblaster X-FI. I go to reboot and after I came back to check if it was there and it wasn't. I cehck msinfo and it wasn't anywhere in there. I got everest program that is like msinfo but a lot more detailed. It said both pci slots aren't in use but I know it's in use cause the red LED light that lights up The F symbol is on and running. I even tried the ASUS probe program and checked everything but it was a failure. I am getting extremely aggrivated. I don't ever want to give up on creative since I have a zen which is cool and I have always trusted their sound cards. If anyone has any idea on what to do please tell me.
Or it could be that the motherboard was programmed to die after 90 days :P but I doubt it.
For the love of god I need help I checked the entire web. EVERYWHERE even the FAQ didn't help me. Please give me some ti
ps.
Oh if it is only to run on service pack 2 tell me that since I think I have regular windows xp professional.
Message Edited by SuperSirius on 03-30-2008 02: PM

Just because something is wrong and you wait minute and get no response doesn't mean they suck. Your the one who should be shot and pissed on. I like creative. I've always trusted their products.

Huge problem with the calendar on Nokia 9300i - ca...

On a Nokia Communicator 9300i I have a calendar that is 1300 kb large and it takes approximately 8 minutes before the calendar actually opens but that is not the problem.
The problem is that now I need to copy that calendar to the new E90 and whichever method I choose it hangs and the calendar is not being copied to the E90.
I tried the build in synchronisation between 9300i and E90 and every single other part can be synchronised only when it comes to calendar it hangs and finally after 10 to 15 minutes it quits.
The same thing happens when I try to synchronise this 9300 with a PC. It will allow me to synch contacts (950 of them) but when I try to synch calendar it stops after 10 minutes with no specific error message. Mostly something like synchronisation failed.
I used the tool called Data Mover from Nokia that can transfer even more setting from 9300i to E90 and this also was hanging on that calendar.
Now I copied the calendar into a separate file 1,6 MB and copied that file onto a memory card but what can I do with this file now on a E90. Can I somehow import it into E90?
It's my big bosses’ phone and he will not give up until I find the solution for this so please no answers to delete anything. He also needs the complete past of from the calendar!
I have also no synchronised copy of this calendar on any PC.
It’s used completely stand alone!
I did manage to make a full backup of the calendar on the 9300i with the build in backup function if that helps!
Please help!

I think this was discussed here before. You should search for it because I do not remember the answer. It seems E90 cannot handle more than a certain number of calendar entries (I do not remember how many), far less than 9300i. Maybe this is the problem: if you have in your 9300i more calendar entries than E90 can store, you either have to delete some of them, or find a replacement for E90.
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II

There is a huge problem with the 3.3 Aperture upgrade.

I have been up most of the night trying to use time machine to return to Aperture 3.2.4, and my previous library, as both were ruined by the upgrade as far as I can tell. I hope that apple is working on a solution. In the mean time I would recommend that anyone reading this to not upgrade until the problem is resolved.

You know that Apple does not respond to these posts. I've upgraded to 3.3 on two different computers with no problems. If you are looking for help, posting some info about the problem may generate some solutions. If you just want to vent, then what you posted is fine.

HUGE problem with the updater (i think)

Ok, So last month my computer crashed and i lost all of my songs. The songs are still on the i-pod though, so is there any way to stop i-tunes from erasing all of my songs when i plug it in again.

Welcome to Apple Discussions.
iTunes always allows you to opt out of connecting to the blank library -- just say "no".
Then you can use any number of ways to transfer your songs back to the computer:
http://www.kelleytown.com/ikelleytown.htm#CopySongs

Problem with the Non-English Characters

Hello,
I have been using Adobe Illustrator but I have a huge problem with the non-english characters with Standart Fonts. With the Professional font's I have no problem with them. But when I'm using any standart font in font folio library I cannot type any "ğ-İ-ş". I can add those letters in fontlab with the glyphs (scedilla, idotaccent, gbreve). Most of the fonts have those letters already prepeared so I dont even have to redraw. But I can't add those glyph to every single font because I dont have that kind of time and patience. Is there any better solution for this? Or is there any font folio pack that all fonts are PRO.
I'm looking forward for your answers
Thanks.

Joel wrote: I'm told that this is the exact difference between Adobe's Standard and Pro fonts — the Pro fonts have additional glyphs, including those necessary for extended Latin script.
Exactly. The Pro fonts have at a minimum the Adobe Western 3 character set, which is essentially western European + Adobe CE.
> Standard fonts just have the basic English character set, with maybe a bit of help for Spanish and French.
A lot more than that!
> You're doing Turkish, right? Adobe's coverage for Turkish in its fonts is not great - some of the Pro fonts have Turkish coverage, many do not.
This is false. Every single Adobe Pro font supports Turkish.
To be clear:
All Adobe Standard fonts support the following languages: Afrikaans, Basque, Breton, Catalan, Danish, Dutch, English, Finnish, French, Gaelic, German, Icelandic, Indonesian, Irish, Italian, Norwegian, Portuguese, Sami, Spanish, Swahili and Swedish.
Adobe Pro fonts support those languages, plus AT LEAST: Croatian, Czech, Estonian, Hungarian, Latvian, Lithuanian, Polish, Romanian, Serbian (Latin), Slovak, Slovenian and Turkish. Some Pro fonts have more language support than this, such as Greek and/or Cyrillic, and additional extended Latin.
See: http://www.adobe.com/type/browser/info/charsets.html
Cheers,
T

I have a huge problem with memory usage.

I am having two very huge problems with the amount of memory the game I'm working on is using. The first is that the background image for a part of my game takes up ~45mb of memory, but believe it or not, that's not my worst problem. i'm not worried about that right now.
The really, really big problem does involve that image, though.
Whn I'm done using the image, I can't get the resources it uses to be freed. As a result, the program uses more and more memory every time you go into that area of the game, because the memory used by tha area is just sitting there.
I used Jprofiler to figure out exactly what wasn't getting released, because I do everything I know how to make everything be garbage collected, including setting all the references to the image to null after you leave that area of the game, but nothing worked.
After I leave the area with the huge memory leak and give everything time to garbage collect, the main screen for memory usage shows about 45mb of memory used by 20 or so instances of int[], which is obviously the image.
However, this obscenely huge int array doesn't show up in the heap snapshot, which according to them means there's no reference to it or the image anywhere in the program.
Here's my question: If there's no reference anywhere to this int array, then why isn't it being garbage collected?

Maybe you haven't actually released all references to that data.
Or if you have one 45mb image, maybe you have a bunch of other huge ones and you're just seeing those.
Why do you have a 45mb background image, though? Can't you use a standard technique like tiling it?

I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look

I am having some huge problems with my colorspace settings. Every time I upload my raw files from my Canon 5D mark II or 6D the pics are perfect in color. That includes the back of my camera, the pic viewer on my macbook pro, and previews. They even look normal when I first open them in photoshop. I will edit, save, and then realize once i've sent it to myself to test the color is WAY off. This only happens in photoshop. I've read some forums and have tried different things, but it seems to be making it worse. PLEASE HELP! Even viewing the saved image on the mac's pic viewer is way off once i've edited in photoshop. I am having to adjust all my colors by emailing myself to test. Its just getting ridiculous.

Check the color space in camera raw, the options are in the link at the bottom of the dialog box. Then when saving make sure you save it to the srgb color space when sending to others. Not all programs understand color space and or will default to srgb. That won't necessarily mean it will be accurate, but it will put it in the ballpark. Using save for web will use the srgb color space.

Was the general problem with the bluetooth headset solved in the new ios 5 or in the new iphone 4s

was the general problem with the bluetooth headset solved in the new ios 5 or in the new iphone 4s ?
thank you greatly
also i would like to know what are the diffrences with the bluetooth 4.0 vs 2.1
( the bluetooth headset i was thinking of is jawbone icon series thinker black )

Hi,
I had HUGE issues with a BlueAnt Q2 on the 4, and after five exchanges, I had to get rid of the phone becuase the Apple store admited that they had "some bluetooth issues."
I still have the Q2, and I was wondering the same thing becuase I realy want an iphone.

HUGES problems with display after waking up from hibernate mode

Hello everybody,
I hope that somebody can help me soon, because in the last 15 days I'm reaaaaallly annoyed with MAC's issues.
In the last 15 days it seemd I had to reboot it a lot of times, because it freezes, it crashes, etc...
Neverthless what happened today it passes all the limits: in the last period, because of these often crashes, I turn the mac off at night, on the other hand when I go to work I simply close the display and let it hibernates.
Today when I came back after work I opened it and it was amazing:
it has a different desktop!! With different icons in the dock, diferent icons in the top-right part, and it was freezed! I had to force it to shut down, restart it...and since then, I had huge problem with display.
It shakes everything while scrolling mails, web pages or icons in the dock. If I scroll between desktops, it takes year lights more than yesterday!!
Nothing happen if I restart as many time as I want.
In my simple opinion it seems a virus issue, but..as far as I know, there is no need to install an AV on a mac, right???
I tried to record some of these probls with the QT, but when you start recording all the desktop, it seems A LITTLE better, smoothing all these shaking effects. NEverthless they are still noticeable.
I'll try to attach a video as a dropbox link, 'cause I can't attach it on the message (it is denied)
PLEASE HELP MEEEEE!!!!
https://www.dropbox.com/s/r1mlpjo5x8g1tkj/scrolling%20problems.mov
https://www.dropbox.com/s/g1ey1xrheo9mvti/scrolling%20problems2.mov
https://www.dropbox.com/s/ljtm53go8ywt9fs/scrolling%20prob3.mov

I am going to add my problem to this as I believe it fits and may add to the conversation.
I have a MacBook Pro, am using Parallels, and have an issue waking it up from sleep.
Circumstances:
I close the lid and walk away from the device in my office. When I return, (over night or an hour later) I open the lid, and if nothing happens swipe the touchpad or press a key, the power light changes from pulsating to steady. then in less than 15 seconds it goes back to pusating. The display never energizes, only remain black.
I usually try opening and closing several times, and occaisionally that will work. Other times, I hold the power key until I hear the drive halt, then turn it on. The grey screen will display, then blue, then just before it gets to the log in, the screen goes black (not energized) and the light pulsates.
I have tried the PRAM reset and Safe Mode starts with no luck.
*Now the really wierd thing.* I decieded to contact Apple support on line and pay for help (yes that is weird in an of itself for me). As I began the process it came to the part for me to enter my serial number. With the lid open, I turned the MacBook on its side to try to read the number and the screen energized and the password unlock prompt was waiting for me to enter the password.
Observations
I had read where the light sensor could be blocked by dirt or the light in the room was too dim, but I clean the screen and there is plenty of light. Dales Post is the first that I have seen Parallels and the Sudden Motion Sensor. That makes some sense to me because of what happened when I turned it on its side. I have verified that it happens regardless of using Parallels. as teh last time I did it I had closed out of all my VMs and I believe exited Parallels.
I am going to try the deleting the power preferences file and will report back.

I just order 8 calendars from iPhoto and they came to me fine. Now I need to order two more but when I go thru the process I get a message saying:unable to assemble calendar. There is a probleme with the photo with the file name"(Null)" more........ .

Would someone be able to explain to me the following issue with Iphoto?
I ordered 8 same calendars for my soccer team and received them fine. Although a couple of pictures on it are a little off (out of focus). I need to order two more of the same calendars but when I go thru the process ireceive an error message saying:
"Unable to to assemble calendar" There is a problem with the photo with the file name "(Null)" The full resolution version of this photo either cannot be located or is corrupt. Please replace this photo or delete it from your calendar.
How can I fine this "corrupt" photo? How did it go thru with the first batch of calendars but won't go thru now?
Thank you for your help.

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

I can not upgrade to quicktime 7.7.3 for windows vista. Error message says there is a problem with the program installer. Any clue as to how to get around this.

I can not download quicktime 7.7.3 for windows vista. The error message says that there is a problem with the windows installer. Any clues?

The error message says that there is a problem with the windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

Having Problems With The Neo2 ? Read This!!!!

Hi,
i just bought a neo2 motherboard, with a p4 2,6 HT and 512 mb Kingston hyper ram ( 2 peaces of 256, else it won't use the dual bandwith :D)
In the beginning everything seemed fine, until i got some sudden reboots and other vague stuff. I read it could be the SB audigy messing things up. I removed the card and windows Xp pro runs fine now. no more sudden reboots or explorer not resonding crashes.
But, i still had problems with games crashing. I got reboots. After i set the "automatic reboot after crash" to false, i got blue screens or lock-ups in my games.
I wondered what it could be. Then i started to put my videocard ( a radeon 9700 pro 128 mb) in agp 4x mode instead of agp 8x! Now my games run without crashes, but benchmarks are not that high. 4780 marks with 3dmark 2003.
I think i will send msi and Ati a mail concerning this problem. I don't know if it is PSU related. Maybe the videocard demands a little more power in agp 8x mode.
Well, having probs with you're NEO2 ??
remove the sb Audigy and turn the agp back to 4 using smartgart ( it's located in you're display settings screen ).
First i tought it was a PSU related problem, because i swapped my 350 Watt enermax with a Q-tec 400 watt psu. The 400 watt PSU died while i was gaming. Maybe the enermax is the better PSU :D So, it could still be a PSU related problem. Maybe the agp 8x settings demands a lot more from you're psu. Anyway, i'll receive a 550 watt Antec PSU soon, so i can check this out....
Btw. I cant run the motherboard in anything better than "slow" mode. In all other modes Xp won't boot. I haven't tryed it since the AGP is at 4X, but i don't think it will matter.
Regards,
Welcome to the real world NEO :D

Ok.....
i raised the memory voltage setting in the bios from 2.65 to 2.8 and the agp voltage from 1.5 to 1.7
Everything seems fine, but games crash back to the desktop now without an error message or the either lockup.
Whatever i do, i can't make the mobo crash in anything but games!
Btw. the following message caught my attention, when i ran f1 2002 with directx 8.1. Since i have directx 9, i haven't seen it anymore. Maybe because the ati-drivers are made for directx 9....
// Watchdog Event Log File
LogType: Watchdog
Created: 2003-10-04 02:02:53
TimeZone: -60 - West-Europa (standaardtijd)
WindowsVersion: XP
EventType: 0xEA - Thread Stuck in Device Driver
// The driver for the display device got stuck in an infinite loop. This
// usually indicates a problem with the device itself or with the device
// driver programming the hardware incorrectly. Please check with your
// display device vendor for any driver updates.
ShutdownCount: 9
Shutdown: 0
EaRecovery: 1
EventCount: 2
BreakCount: 2
BugcheckTriggered: 1
DebuggerNotPresent: 1
DriverName: ati2dvag
EventFlag: 1
DeviceClass: Display
DeviceDescription: RADEON 9700 PRO
HardwareID: PCI\VEN_1002&DEV_4E44&SUBSYS_00021002&REV_00
Manufacturer: ATI Technologies Inc.
DriverFixedFileInfo: FEEF04BD 00010000 0006000E 000A18EA 0006000E 000A18EA 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
DriverCompanyName: ATI Technologies Inc.
DriverFileDescription: ATI Radeon WindowsNT Display Driver
DriverFileVersion: 6.14.10.6378
DriverInternalName: ati2dvag.dll
DriverLegalCopyright: Copyright (C) 1998-2002 ATI Technologies Inc.
DriverOriginalFilename: ati2dvag.dll
DriverProductName: ATI Radeon Family
DriverProductVersion: 5.2.3790.2
I wish i had another videocard to test. My radeon 9700 pro is getting suspicious...
Regards,
The real world

Huge problems with the N72.

Similar Messages

Maybe you are looking for