HUM. Device from poller and reports dissapeared in LMS 3

Hi,
We have noticed that some devices has dissapeared from HUM pollers and some quick reports have dissapeared too. It happened again some months ago. I would like to know:
1. How I can fix it.
2. Which logs I can see to troubleshoot the problem.
3. If is possible I can restore only the hum module from LMS backup
Thanks

Hi,
To get more verbose logging navigate to:
Health and Utilization Monitor > Admin > System Preferences
- Select Log Level Settings.
- Select the application module from the drop-down list.
- enable debug for "UPMProcess"
- Select the Debug log level from the Logging Level drop-down list.
The logs:
- HUMPortal.log
- upm_summarization.log
- jrm.log
- upm_process.log
Examining the resulting files will help determine the cause.
Here are the steps to uninstall HUM:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_health_and_utilization_monitor/1.1.2/r eadme/windows/HUM112rnW.html#wp379531

Similar Messages

How do I unlock mac? Someone hacked my account and I wiped my device from iCloud, and now I ask for a four digit code ignition Mac. How do they proceed in that way to unlock my Mac?

How do I unlock mac? Someone hacked my account and I wiped my device from iCloud, and now I ask for a four digit code ignition Mac. How do they proceed in that way to unlock my Mac?

Settings>general>resets>erase all content and settings.
That will put it back to its out of the box state. Set it up with your own apple Id.

DFM@LMS4.0.1 - no devices for Polling and Thresholds

Hello,
DFM with LMS4.0.1 got all wanted devices and is working fine so far except of we cant do settings on Polling & Thresholds, because we cant select anything:
How can we solve the problem? Many thx for hints in advance,
Steffen

This is expected. You can only adjust polling and threshold parameters on groups. You cannot select individual devices. If you want to be able to control polling parameters or thresholds at the device level, you will need to customize one of the customizable fault groups to match the devices in question. Then you can adjust the polling and threshold group priorities so that customizable group is closer to the top. Apply your changes, then go and adjust the desired settings.

Linking projects/daisy chaining and reporting to an LMS

Can anyone help please?
I am new to Captivate and LMS's and so far, have self-taught and read books and lots and lots of web pages for help and information - information overload!
My problem is this:
I have a large project (146 slides) which, having read advice, I have tested by breaking into smaller projects. I have Module 1 which is the learning phase for the user, some questions included, but these do not need to report to the LMS. I then have the Test module in a second Cp project - a selection of 20 questions which are pulled from a question pool. These DO need to report to the LMS.
At the end of Module one, users can opt to either take the test now or later. The user has an option to exit the module and take the test later (close the project - expecting them to be redirected back to this page by the LMS when they open the project again!) or click a button which will open up the Test module. The button to open the Test module has been set to link to the Test Cp project.
I've tested this so far by publishing both as EXE files and running through the whole module - it all links in fine and I move from one Cp project to another without issue. However, now I am scratching my head about how to publish as Flash files in order for the reporting to work, particularly as there are 2 Cp projects.
I have looked at the Aggregator function but don't think this is the right route because it automatically adds a TOC and I don't want one (unless someone can tell me how to switch this off in Aggregator..?!)
I have also looked at using the SCORM Packager, which seems to be the route people are indicating for muliple SCO's published to an LMS.
Here's what I have done.
Enabled Quiz Reporting for both projects and set up preferences accordingly.
Published Module 1 as a zipped SWF (all files - Manifest.XML etc created ok)
Published Test as zipped SWF - ditto above.
Run the SCORM Packager and added the 2 zipped files above to create one zipped file.
Rightly or wrongly, I have unzipped the 'new' combined project, located the HTM file for the first module and run it in Internet Explorer. Whilst this runs ok, on coming to the last screen to link to the Test, it falls over saying it can't find the file. It is looking for the HTM file in the directory where the original .Cp project is stored. There is no HTM file created here - just the original Cp file.
What am I doing wrong? How do I get them to link correctly AND be able to package them up?
I can't test this on an LMS as I don't have access to one or to the client's LMS - I will simply be providing them with the zipped file which they will FTP to their LMS.
Any help would be appreciated as deadline is looming!
Thanks in anticipation.

Raquel, have you tried the Reload Editor for setting up the manifest? Also, you may want to give ADL's Test Suite a shot for self-testing your package in an LMS-like RunTime Environment.
Now, it could be that I'm reading this wrong but it sounds to me like, when you say "There is no HTM file created here - just the original Cp file", there should be an html file there. If your button in the first module is scripted to launch a new html file in the same window, make sure you published the second module to include an HTM file. I'm assuming you mean "swf file" when you mentione "Cp file", right?
Reload also offers the SCORM 1.2 Player for testing your course in a RunTime Environment.
Feel free to reach out if you still have issues or need assistance in testing.

Removing my device from BES and adding a different email account?

Have a small problem, I no longer use my personal BB on the BES at work so instead I want to remove my work address and put on my personal e-mail. The problem I am having is that under e-mail setup on the device I only get the option:
"I want to use a work email account with a Blackberry Enterprise Server
No other options to enter a different address or anything
Can anyone help me!
Thanks
- Niteen

Hi and welcome to the Blackberry Forums
You need any Blackberry Data Plan with your carrier to setup the personal mails in the device.
Call your carrier and ask for prices.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Running SQL and Reports in Multiple LMS's

Hi,
We have an Oracle ilearning implementation that covers a number of subjects. The Ilearning system/database is partioned for each subject with each subject having the same schema and database objects. The only thing that is different is the data within the tables etc... I occasionally have to run SQL reports on all these partitioned databases. The only I can do this is to switch context from subject partition to subject partition. I was wondering if there is a quick way (one time SQL execution) to run the SQL report against all the partitions we have in total 18 subject partitions. Not having this ability means I have to run the same SQL multiple times which is a very time consuming exercise. I would preferably like to do this at the database end using SQL developer.
Your help and advice will be greatly appreciated.
Thanks

Hi Scott,
Yes you are right I am referring to site. At the moment I have been created a 'user' that has access to the database objects in the ILEARN schema via synonyms. So this means having access to the ILEARN schema will allow me to use one single piece of SQL to report accross the 18 different sites we have and pull all the data into a single report. Currently, I have to report site by site and have 18 outputs for each SQL I run. We have to run 4 SQL statements and I'd rather have 4 outputs with all 18 site data in each of these outputs.
Thanks

My iphone 5s keeps changing time on its own and keeps disconnecting from the wifi and cellular data. All other devices are connected and working. Is it a virus?

What can i do to fix it? My husband suggests I reset my phone but I'm afraid my data will be wiped off an that would be of total waste if the problem doesn't even get solved. Your help would be much appreciated!

There is no known malware capable of infecting an iPhone that has not been jailbroken (ie, hacked to allow apps from outside the App Store). If you have jailbroken it, you have exposed yourself to malware, and should restore the phone to factory defaults, without restoring a backup. All data will be lost, but that is unavoidable.
Most likely, you haven't jailbroken it, in which case you don't have to worry about malware. In that case, it's hard to say what's going on, but there are some things you can try.
First, try resetting your device. Press and hold both the home button and the sleep/wake button for about 10 seconds, until the screen turns off. Ignore the slider that will appear. Release the buttons, then press and hold the sleep/wake button until the Apple logo appears. This is the equivalent of a reboot, and should not affect your data or apps.
If that doesn't help, try restoring your device from backups, and if that doesn't help, restore it to factory settings (ie, do not restore a backup). See:
http://support.apple.com/kb/ht1414
If none of that helps, the issue is caused by some kind of hardware problem, and the device will need to be repaired or (more likely) replaced.

Can I use forms and reports 6I runtime for production environment?

I have a doubt.
I know if i use or install developer (forms and reports 6I) both, runtime and builder, I do require a license.
But If I buy the standard edition license for database (in production or deployment), and I wanna use the runtimes (from forms and reports) only as runtime not to modify or develop anything, is it possible? just to download it or install it in RUNTIME mode?
Is it possible and legal?
Thanks

Can I download that developer and install both forms and report runtime (yes only runtime) to access a licensed standard edition database? The problem is, you can't download that version any more! All download links to Forms version earlier that 10g R2 have been removed from Oracle's web site. You might still be able to download Forms 6i from My Oracle Support, but this requires a paid license agreement with Oracle to access My Oracle Support (formerly Metalink).
So, if you already have a copy of Oracle Developer Forms and Reports 6i then all you need to do is contact your local Oracle Sales Representative to get an official answer to your licensing question. If you don't have a copy of Forms 6i, then you are pretty much out of luck unless you know someone who has a copy!
Craig...

Forms and Reports 6i to web migration

Hello,
Is there any white paper that describes about how to migrate from client server architecture to a web running on UNIX?
We are migrating from forms and reports 6i running on windows to web running on UNIX with the versions of products.
Thanks in advance.

check this out:
http://otn.oracle.com/products/forms/htdocs/upgrade/content.html
I have tried running Forms/Reports 6i servers on Solaris 8. It was different than using the 9iAS EE forms/reports services - but the concept is similar. I also used whitepapers that I downloaded from Metalink which were explaining the client/server and the web form design differences (such as when-mouse tringgers won't work in web forms, etc).
regards

Forms and Reports 6i connections fail after db upgraded 10gr2

After database upgraded to 10gr2 on 64bit Windows 2008 server, connections from forms and reports 6i hang while sqlplus connections work. After database is restarted, connections to forms and reports work again but only for a few days?
Also if authenication is changed from NTS to NONE, we do not experience any connection problems from forms or reports.
Any suggestions would be appreciated.
Thanks

Hi!
Is there maybe a database package that gets invalid form some reason?
And if forms/reports tries to connect, the package should get compiled cause of a call
to it and this ends in a endless lock?
Regards

Install Forms and Report 11g, Weblogic, OID and SSO ?

Hello,
I want to migrate our system from Forms and Reports 6i to 11g with weblogic server 10.3.3 and I have two questions:
1st: If we considered to obtain a system consists of (Weblogic 11g + Forms and Reports 11g + OID + SSO + Weblogic Portal + BI Publisher)
What is the steps and the sequence of products installation and configuration, and what is the required versions of each one ?
2nd: Can I abandon OID and SSO, is there a substitute ?
If so, what's the steps and the sequence of products installation and configuration ?
Thank you very much

>
You use the Oracle WebLogic Server installer to install Oracle WebLogic Server and to create a Middleware home (which is required before you can install Oracle Forms and Reports).
For Oracle Forms and Reports 11g Release 2 (11.1.2), download Oracle WebLogic Server 11g (10.3.5) from OTN or Oracle Software Delivery Cloud.
Be sure to select the proper Oracle WebLogic Server installer for your platform.
>
weblogic you can download from http://www.oracle.com/technetwork/middleware/ias/downloads/wls-main-097127.html

Cisco Prime LMS 4.2 Device Availability Poller & Portlet

The default, non-editable "System" Device Availability poller appears to be the only one used by the Availability Pie Chart Portlet. Or is there a way to a show a chart based on a user defined poller, which excludes devices known to be currently offline?

Hi ,
It's true that you will not be able to Delete the system Defined pollers ,however you can DEACTIVATE them.
selecet system defined device availblity poller and De-activate it..
Now created a NEW poller , add the devices which you are interested in. and you should able to see the data in the PIE chart for the user defined poller.
Thanks-
Afroz
[Do rate the useful post]

Accidentally removed my device from icloud

i accidentally removed my ipod device from icloud and now i can't use the findiphone thing becase someone stole it. is there some way i can undo this with out having the ipod with me? Or can i still track it when ever it's near wifi. please help me someone....

I removed a device, how do I add it back?
Once you remove a device, it will automatically be added again the next time the device connects to the Internet, as long as your iCloud membername and password are configured on the device under iCloud Settings > General. If this does not occur, see the "iPhone, iPad, Mac or iPod touch does not appear in Find My iPhone" section above.
Above from:
http://support.apple.com/kb/TS4006

HT4436 how do I disconnect a device from iCloud

How do I disconnect a device from iCloud and not lose all of my contacts, etc?

Go to Settings>iCloud and turn all synced data (contacts, calendars, etc.) to Off. When prompted, choose to keep the data on your device. After everything is set to off, scroll to the bottom and tap Delete Account.

I need to remove a device from my Itunes account and the device is not operable. How can I do this. I am on the road and away from my computer.

I need to remove a device from my Itunes account. The device is not operating and I am on the road.

What sort of transaction ?
If it's an auto-renewing subscription that is due then there are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098
If it's a pre-order that is being released then see this page : http://support.apple.com/kb/HT5714
If it's something that you've already 'paid for' then purchases are considered final, but you can try the 'report a problem' link to contact iTunes Support and see if they will cancel/refund it : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

HUM. Device from poller and reports dissapeared in LMS 3

Similar Messages

Maybe you are looking for