Human Task: how to get the participant name in the task form?

HI All,
I am using SOA Suite 11.1.1.6 in the current project. For a human task, there are multiple participating groups. For each participant, the payload is different. Currently, we are calling Human Task multiple times to pass the payload. However, I like to take advantage of new features in 11g Human task. I like to setup multiple groups as parallel. Then, jsf page can selective display corresponding parts of the payload for different partidipants. The problem is how JSF can get the name of the participant when page is invoked?
Thanks in advance,
Steven

Hi,
Variants are stored in table VARI and VARID.
You can use RS_ALL_VARIANTS_4_1_REPORT to get all the variants for a report program.
please check out the link below it will be helpful to you
Re: Programs for a transaction variant
Hope this helps.
ashish

Similar Messages

  • How to get a server name through the load balancer

    Hi.
    I'd like to get the server name where is my application installed. There are some servers and clients access there throuth the load balancer. When I try to get it with request.getServerName(), I get the virtual address of the load balancer.
    Any suggestions?
    Thanks.

    Dear Sikindar;
    THanks for your cooperation, but I believe that these Tcodes will eb helpful if I know the table name, actually we don't know its name and that's what I'm asking about, how can I get the table name for the ABAPer?
    Appreciating your cooperation.
    Best Regards;
    Lobna

  • How to get ther servlet name from the Httprequest / servletContext

    Hi,
    How can I get the servlet name from the Http Request / Servlet conext?
    Arthik

    I have a requirement to call the business logic either in local server / external server.
    Local / External server
    The original / main request is made to the server from the client and from the server if the main request requires some resource (second request from server side) available in the external server then I need to make a URL connection. If the requested resource is the local resource then I need to by-pass the HTTP call. So I need to verify the server name , port with the originally requested server.Then I need to check if the request servelt is available in local or not.
    Can you please help me.

  • How to get value and name of the n'th parameter in a pl/sql funct./proced.

    procedure test(name varchar2, birthdate date, zip number, country varchar2);
    in procedure x I do
    test('Michael Postmann', to_date('03.01.1983', 'DD.MM.YYYY'), 7461, 'AUSTRIA');
    And this should htp.print the following:
    test: name=Michael Postmann,birthdate=1983/01/03,zip=7461,country=AUSTRIA
    In procedure test I want to know:
    *) What is the name of myself (the procedure)
    *) Optionally: Am I a procedure or a function?
    *) How many Parameters do I have?
    *) What are the values of them?
    *) What are the names of them?
    *) Optionally: What are the types of them?
    What I actually want to do is:
    I have a procedure for logging errors. So in my program I call this function frequently and I want it to log the current time, a string passed to the logging function, the client's ip, etc.... but it should also log a list of the parametrs and values of the procedure/function where the error occoured.
    Is there any way to do this (I think in C this is done by argc and argv, but a string containing all the information (as you get it from the WebDb when something goes wrong) would be enough)?
    Thx in advance,
    Nomike aka Michael Postmann

    Name of procedure or function can be retrieved using DBMS_UTILITY.FORMAT_CALL_STACK:
    CREATE OR REPLACE FUNCTION fn_whoami (v_in varchar2)
    RETURN varchar2
    AS
    v_stack varchar2(1000) DEFAULT DBMS_UTILITY.FORMAT_CALL_STACK;
    v_job varchar2(500);
    v_name varchar2(100);
    BEGIN
    v_job := SUBSTR(v_stack,INSTR(v_stack,'function'),256);
    v_name := SUBSTR(v_job,1,INSTR(v_job,CHR(10))-1);
    return v_name;
    END fn_whoami;
    select fn_whoami('1') from dual;
    CREATE OR REPLACE PROCEDURE pr_whoami
    AS
    v_stack varchar2(1000) DEFAULT DBMS_UTILITY.FORMAT_CALL_STACK;
    v_job varchar2(500);
    v_name varchar2(100);
    BEGIN
    v_job := SUBSTR(v_stack,INSTR(v_stack,'procedure'),256);
    v_name := SUBSTR(v_job,1,INSTR(v_job,CHR(10))-1);
    dbms_output.put_line(v_name);
    END pr_whoami;
    exec pr_whoami;

  • How to get the specific name of the workset which is currently selected by the user in sap portal 7.0

    Dear Expert,
    I have one requirement like to read the selected workset name in portal by the current user.I have read two documents regarding how to retrieve the PCD contents (iViews, Pages, Worksets and Roles) and its properties like Created by, Changed by, Last changed by and others using PCD API.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401?overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/508baf88-9335-2d10-efa6-c6ad61e5fc4b?quicklink=index&overridelayout=true
    But I am not able to understand how to get the specific name of the workset which is currently selected by the user.Can you please help me.
    I am using portal 7.0.
    Thanks & Regards,
    Patralekha

    Hi Expert,
    I found that we can use Interface INavigationHelperService to read Portal Role selected by user at runtime from http://scn.sap.com/thread/52194
    But this class is available in SAP NetWeaver 7.30 Enterprise Portal .
    But in SAP NetWeaver 7.0 Enterprise Portal that interface is not available.
    INavigationService is available there.
    But didn't get any proper discussion on this interface for the same requirement.
    Can you please help me.
    Thanks & Regards,
    Patralekha

  • For some artists in my Music app on my I-phone, the songs do not appear when I search by the artist.  However, if I search the album name, all the songs show.  How do I get the songs to show under songs?

    For some artists in my Music app on my I-phone, the songs do not appear when I search by the artist.  However, if I search the album name, all the songs show.  How do I get the songs to show under songs?

    Hi Spam_Valley,
    I understand that you are having issues with your music displaying correctly. This may be an issues with the metadata stored within that song, and iTunes interpretation of that info.
    We may need to repair this. See the following resources for information:
    iTunes 10 for Windows: If song titles don’t appear correctly
    http://support.apple.com/kb/PH1468
    Fixing Incorrect Song or Album Listings in iTunes
    http://support.apple.com/kb/TA24677
    Thanks,
    Matt M.

  • How to get the column names of the table into the Dashboard prompt

    how to get the column names of the table into the Dashboard prompt
    Thanks & Regards
    Kishore P

    Hey john,
    My requirement is as follows
    I have created a Rank for Total sales by Region wise i.e RANK(SUM(Dollars By Region)) in a pivot table.
    My pivot table looks like this
    COLUMN SELECTOR: TOTAL US , REGION , DISTRICT , MARKET
    ---------------------------------------------------- JAN 2009          FEB 2009        MAR 2009
    RANK              REGION                  DOLLARS           DOLLARS        DOLLARS DOLLARS
    1 CENTRAL 10 20 30 40
    2 SOUTHERN 10 30 30 70
    3 EASTERN 20 20 20 60
    4 WESTERN 10 20 30 40
    When i select the District in column selector
    Report has to display rank based on Total Sales by District. i.e
    ------------------------------------------------- JAN 2009         FEB 2009       MAR 2009
    RANK             DISTRICT              DOLLARS           DOLLARS        DOLLARS DOLLARS
    for this i need to change the fx of rank i.e RANK(SUM(Dollars By Region)) to RANK(SUM(Dollars By District)) and fx of Region i.e Markets.Region to Markets.District dynamically.
    so , i need to capture column name of the value selected from the column selector and dynamically i need to update the fx 0f RANK & fx of region.
    do you have any solution for this?
    http://rapidshare.com/files/402337112/Presentation1.jpg.html
    Thanks & Regards
    Edited by: Kishore P on Jun 24, 2010 7:24 PM
    Edited by: Kishore P on Jun 24, 2010 7:28 PM

  • Previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once before. Recently that isn't happening. How do I get that feature back?

    When downloading, previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once. Now that isn't happening. How do I get that feature back?

    When downloading, previously Firefox would show a number at the end of the file name (renaming the file by adding a number) showing that I had already downloaded a file at least once. Now that isn't happening. How do I get that feature back?

  • How to get the display name of the dropdownlist?

    How can i get the display name of the dropdownlist.
    I want to have value as other data not the same as display name.
    In that case is there any easy way to get the display name of the selection from the dropdownlist.

    I usually just use a hashmap to store the value and label, if I want to retrieve the label again later.
              HashMap bleh = new HashMap();
              bleh.put(dropDownValue, "Drop Down Label"); //Item value (any object), Item Label (String)
              Iterator it = bleh.keySet().iterator();
              while (it.hasNext()) {
                   Object key = it.next();
                   SelectItem selectItem = new SelectItem(key, bleh.get(key));
              //And then later, when you want to retrieve the label
              bleh.get(itemValue); //The item value of the label you wantThe value is easy to get because the selected item(s) from the list will be set to the value(s) the user selected. You should have a getter in your bean for that.
    CowKing
    Message was edited by:
    IamCowKing

  • How to get the full name of the Account Owner?

    Hi,
    I would like to ask if there's a way to display the full name of the Account Owner in a report where the subject area is Opportunity? Currently, the Username (under Owned By User) which displays the full name is equal to the Opportunity Owner.
    Thanks,
    Teena

    Hi Cameron,
    Thanks again.
    Currently, I have a report under Opportunity history where the following fields are being shown:
    - Account's Country
    - Opportunity Owner (Owned By User - gives me the full name)
    - Account Name
    - Opportunity Name
    - Metrics field (Revenue, Volume. etc.)
    - Close Date
    - some custom fields
    The users want to see the Account Owner so I added this field but it's showing the owner's alias. My question is, in using the "Combine with Similar Analysis", can I display all the values retrieved by the Opportunity report and get the value of 'Owned By User' in the Account report?
    I have tried combining the two reports but the values are derived from the driving report which is Opportunity. How can I get the value/format of the field in the Account report?
    Teena

  • How to get the owner name for the file in ftp using abap ?

    Hi folks ,
    How to get the owner name for the file in ftp using abap ? please help me very ugernt . I tried with all standard FTP commands
    but doest work out me . Helping in this regard highly appreciated ...
    Thanks and regards,
    Swarupa Vanarchi

    Hi
    dont you  have used the os user while calling the FTP_CONNECT FM?
    Hope you are not talking about the user executing the FTP program.
    Else If you are talking about the FTP file creator then its not related to abap as you can handle it by maintaining the user in file name itself.
    May be i am going too far with if and elses here as your question possesses no  clarity.
    Plz elaborate your requirement  before anybody can help.
    Regards
    sateesh

  • Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?

    Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?

    Not a lot of details here, but my guess is this isn't working for you because you are wiring in the task to the Active Channels Property and not the actual Channel Name. I have attatched a screenshot of what I believe you are trying to do. The Task has 2 channels in it, so I need to index off one of the channels and wire it into the active channels input of the Channel Property node. Then I can read information about that channel
    Attachments:
    channel_name.JPG ‏69 KB

  • How to get fully qualified name for a class with just the class name

    I want to get the fully qualified name of the class at runtime. The only piece of information which I have is the class name.
    I want to create a runtime instance of a class with the class name [Just the class name].
    Is there is any way to achieve this using ClassLoader?
    Could anyone suggest me an idea?
    Cheers,
    Vinn.

    Nope. If you are given "List", will you decide that means "java.util.List" or "java.awt.List"? Of course you could prompt the user to make the decision for you, I suppose. But using a class loader isn't going to make the task any easier.

  • How do I get Mozilla to use the page name for the actual bookmark name instead of the URL when I bookmark a page

    I just noticed this (in comparison to Internet Explorer): In IE, when you favorite a webpage, it uses the actual name of the webpage (for example, for this page, it would be "Ask a Question Firefox Help" as the bookmark name), but in Mozilla it uses the URL address as the bookmark name. I was wondering if it was at all possible to change my Mozilla settings in order to make it use the webpage name as the bookmark name instead of the URL address? I hope everyone understands what I'm getting at? If anyone can help me, I would really appreciate it. Thanks.

    Does this happen with each bookmark?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can try to check and repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/

  • How to get the Users Name from the SSL certificate?

    Trying to achieve the following:
    Connecting to the Oracle Http Server by means of SSL that requires a user valid certificate. Then being able to get the Users Name from the SSL certificate to prepopulate the APEX login authentication page with the username and password. Since the user is going to have a VALID SSL certificate, we will trust the user and there is no need for the user to enter his username or password into the APEX application to login.
    Does SSO do this or something else?

    Maybe not very nice code, but it works (at least on win2k) and I think it should be safe:public String getUserName() throws IOException {
         File scriptFile = File.createTempFile("script", ".js");
         FileWriter fw = new FileWriter(scriptFile);
         fw.write ("WScript.Echo(WScript.CreateObject('WScript.Network').UserName)");
         fw.flush();
         fw.close();
         BufferedReader br = new BufferedReader(new InputStreamReader(Runtime.getRuntime().exec("CSCRIPT.EXE \"" + scriptFile + "\" //Nologo").getInputStream()));
         String uName = br.readLine();
         br.close();
         scriptFile.delete();
         if (scriptFile.exists()) scriptFile.deleteOnExit();
         return uName;
    }

Maybe you are looking for