Hyperion Report 7.0.1.2 -- use of substitution var that is not a member of outline

I need to have a variable that tells me the day of the month and the number of total days in the current month for formulas within Hyp. Reports against data in my database. I have stored these values as sub vars which can change daily/monthly as needed.However, I can not see a way to access these in my Report Designer! Does anyone have any tips or other solutions, such a way to access the system date and extract the info needed for my formula, etc? Thanks in advance.

This problem comes only when you are writing formula on cell level. If possible, put formula at the the column level. i.e. In Column 'C', put formula as [A]-<b>. Now, if you add another column between A & B, formula will automatically change to [A]-[C].This should work unless you have a situation where every cell in formula column is using a separate calculation.

Similar Messages

  • Message uses a character set that is not supported by the internet service

    Does any one have any advice on how to fix this problem?
    E-mails sent from my iphone 3G periodically arrive in an unreadable form at the recipient. The body of the e-mail has been replaced with the message "This message uses a character set that is not supported by the internet service...." The problem e-mails also include an attachment that contains an unformatted text file containing the original message surrounded by what appears to be lots of formatting data that is displayed as gibberish.
    This occurs sometimes, but not always, even with the same recipients. I am sending e-mail through a G-mail account that is configured on the iphone using IMAP. I have tried the gmail account to use the two available formatting options for mail, but neither fixes the problem.
    I have also upgraded to 2.01 and restored a few times without impact.

    Hi,
    I got somewhat similar problem with special charecters(German umlaud �,�,�..).
    I create a file with java having special charecters in it. Now if I open this file I am able to view the special charecters in it.But If I attach this file send it using following code then receiver can not see the umlaud charecters in it.They get replaced by _ or ?
    MimeBodyPart mbp2 = new MimeBodyPart();
    FileDataSource fds = new FileDataSource(fileName);
    mbp2.setDataHandler(new DataHandler(fds));
    mbp2.setFileName(output.getName());
    Multipart mp = new MimeMultipart();
    mp.addBodyPart(mbp2);
    msg.setContent(mp);
    Transport.send(msg);
    From you message it looks like you are able to send the mail attachment correctly(by preserving special charecters).
    Can you tell me what might be wrong in my code.
    I appriciate your efforts in advance.
    Prasad

  • HT1689 can i use an old iphone that is not being used as a phone as just an ipod?

    Can i use an old iphone that is not being used as a phone as just an ipod?

    Yes. Instructions are here: http://support.apple.com/kb/HT3406

  • The server you are connected to is using a security certificate that CAN NOT BE VERIFIED.

    First we have changed nothing, we have not done anything to our Yahoo or Outlook 2003 and suddenly this starts popping up all the time.
    We have Windows 7, Office Pro. 2003 and use Outlook 2003 with Verizon Fios and Yahoo is our email server. This message started popping up yesterday out no where, does anyone have any thoughts about it? I have posted it on the Verizon site, however I have more faith in the help I receive here thank you.
    The server you are connected to is using a security certificate that CAN NOT BE VERIFIED.
    A certificate chain processed but terminated in a root certificate which is not trusted by the trust provider.
    Do you want to continue using this server?
    Solved!
    Go to Solution.

    Did you get any email notification of a change to your email servers? So far I only found these settings from 2010
    Incoming Server: incoming.yahoo.verizon.net
    Server Requires Authentication: Yes
    Username: fakeacct
    Password: fakepassword
    Requires a Secure Connection (SSL): No
    Port: 110
    Outgoing Server: outgoing.yahoo.verizon.net
    Server Requires Authentication: Yes (You can set it to use the same settings as incoming, or manually enter the username and password.)
    Requires a Secure Connection (SSL): No
    Port: 25
    (Big thanks to SomeGirl for this info)
    Are these the settings configured in outlook?  If these are the setting they may need to be updated
    If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
    http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

  • TS1702 I am trying to back up and sync my iPhone 4 and it keeps telling me the iPhone is refusing the request to back up on the latest back up date that I want to use.  I can only use an older backup that is not recent.  Anyone know what is up?

    I am trying to back up and sync my iPhone 4 and it keeps telling me the iPhone is refusing the request to back up on the latest back up date that I want to use.  I can only use an older backup that is not recent.  Anyone know what is up?

    Have you downloaded and installed an App Store app that you downloaded free from some website instead of from the App Store? If so, that's a stolen app, and you need to delete it.

  • How to Drill Through from Hyperion Reporting to Oracle - GL by using FDM?

    HI
    I am new to FDM.
    I already Installed and Configured FDM.
    I need to provide Drill through functionality on Hyperion Planning Workspace (Hyperion Reports built using Hyperion Financial Reporting Studio and Data Forms) to Oracle Financials(GL) by using FDM.
    I think 1st i need to develop Application in FDM Workbench to Push data from Oracle Financials to Hyperion Essbase.
    than i need to enable "Drill" on Hyperion Finaical Reports.
    Can you please share link , guide or any thing.
    Its urgent please.
    thanks
    Sher
    Edited by: Sher Ullah Baig on Sep 13, 2012 3:22 PM

    Thanks
    But when i try to log in i m getting error bellow"
    Failure of server APACHE bridge: No backend server available for connection: timed out after 10 seconds or idempotent set to OFF."
    So do u have any other reference plz
    thanks

  • Using a dll function that does not have any inputs from a VI

    Hello all, I'm very new to Labview, I have wraped a dll library using the LVlib wizard and now I am trying to use it in a project.  I have a function that does not take any inputs or return any thing except that a struct is populated with some status information as part of the call.  I am able to draw a StartInterface VI because my void startInterface(const char* configFile, struct status_struct* status) takes the location of a configutation file as an input. But I can not figure out how to connect my Call Library Node to my a function vi that does not have any inputs ( void shutdownInterface(struct status_struct* status)). 
    Note that the status struct is deffined to be only and out put at the creation of the LVLIB.
    Thanks, Mike

    Thanks for the responses guys:
       I think I am aware of the conotations of inputs and outputs when I created the lvlib I specified the argument  struct status_struct* status as only an output instead of the default of input and output.
    I do not think that I am doing anything as complex as function callbacks. My immediate goal is to have an executable (I have application builder) with two buttons and two three text fields one text field for the input of the config file, two text-fields for a cstring that is contained in the status struct; one button to start the interface and one button to stop the interface. 
    This is in all likely hood a case of my self being too dense and missing something fundimental ;-)  I just can't figure out how to wire the shut down method after I've configured the call library node. See the attached pictures:
    Attachments:
    Start.jpg ‏7 KB
    shurtdown.png ‏9 KB

  • Is it possible to use events for objects that do not use swing or awt

    Dear Experts
    I want to know if events are possible with plain java objects. A simple class that is capable of firing an event and another simple class that can receive that event. My question is
    1. If it is possible - then what is the approach that needs to be taken and would appreciate an example.
    2. Is Observer Pattern in java going to help?
    To explain further i am doing [Add,Modify,Delete,Traverse] Data tutorial using swing in Net beans. I have a ButtonState Manager class that enables and disables buttons according to a given situation. For example if add is clicked the modify button becomes Save and another becomes Cancel. The other buttons are disabled. What i want is the ButtonStateManager class to do a little further - i.e. if Save is clicked it should report to DBClass that it has to save the current record which was just added. I am foxed how this can be done or what is the right way. Thanks for reading a long message. Appreciate your help.
    Best regards

    Thanks Kayaman
    i guess i am doing something else maybe it is crazy but i need to work further i guess... i cant post the entire code as it is too big but some snippets
    public class DatabaseApplication extends javax.swing.JFrame {
        ButtonStateManager bsm;
        /** Creates new form DatabaseApplication */
        public DatabaseApplication() {
            initComponents();
            // ButtonStateManager has a HUGE constructor that takes all the buttons as argument!
            bsm = new ButtonStateManager(
                    btnAdd,
                    btnModify,
                    btnDelete,
                    btnQuit,
                    btnMoveNext,
                    btnMovePrevious,
                    btnMoveLast,
                    btnMoveFirst );One of the methods in the ButtonStateManager Class is as follows
      private void modifyButtonState()
            btnAdd.setText("Save");
            btnModify.setEnabled(false);
            btnDelete.setText("Cancel");
            btnQuit.setEnabled(false);
            ...Finally the Crazy way i was trying to do ... using EXCEPTIONS!
      void modifyClicked() throws DBAction
            if(btnModify.getText().equalsIgnoreCase("MODIFY"))
                modifyButtonState();
            else
                throw new DBAction("SaveAddedRecord");
        }And Finally how i was Tackling exceptions....
      private void btnAddActionPerformed(java.awt.event.ActionEvent evt) {                                      
          try {
                bsm.addClicked();
            } catch (Exception e1) {
                processDBAction(e1.getMessage());
        private void processDBAction(String msg)
            if(msg.equalsIgnoreCase("SAVEMODIFIEDRECORD"))
                System.err.println(msg);
                bsm.normalButtonState();
            }Edited by: standman on Mar 30, 2011 4:51 PM

  • Can Captivate be used with a LMS that is not SCORM compliant?

    We are currently using Flash for all of our online courses, but would like to switch to Captivate.
    Unfortunately, our LMS is not SCORM compliant. Is there a way to use Captivate with our LMS? We would need it to record test scores and student information. We're open to a third party solution.

    TLC is correct, you could report to your own DB.
    Reply to a similar question with webpointers:
    Ways to integrate captivate with a database?
    Is your LMS AICC compliant? Captivate will work with AICC as well.
    And while Adobe Connect is not technically SCORM compliant, Captivate will work with that as well.
    AND Captivate can track via xAPI (TinCan), so there's that option too...though I suspect if your LMS doesn't support SCORM, it probably doesn't support xAPI.
    So you have a few options...

  • I don't want to have firefox 4. I want to go back to firefox 3. How do I do that? I have a program that I use on my computer that is not compatibale with firefox 4 and is with firefox 3.

    I use a program called Digital Persona Personal. It stopped working when Firefox updated from 3 to 4. I have tried everything to get it to work. I went to the website of Digital Persona and asked for help but they said that there is no fix for this and they no longer work with clientele like us only business's now. I really need to use this program as I have a very bad memory problem and don't remember usernames and passwords very well. That is why I have a computer with a fingerprint reader. So, you see I really need your help in going back to Firefox 3.

    You're welcome

  • How can I use a COM object that does not have a type library?

    Hello,
    I've created a com server in python for which I do not have a type library. I am able to call functions for this application in Python, TCL, I'm sure VB, etc. without the type library.
    Must I have a type library registered to use this COM object with Labview? I was hoping I could simply supply the name to the refnum (or the GUID) then call functions by passings strings to the invoke node. This does not seem to be possible - am I missing something?
    In the event that I cannot use a com server without a type library. Any recommendataions on how to create one? I'm wondering if I can use the same GUID and create a shell in LabWindows which generates the IDL/TBD file I need for Labview to see my
    com server.
    Any help is greatly appreciated.
    73,
    Timothy

    Timothy Toroni wrote:
    > Thanks for the info, however their example is labview server and
    > python client. I'm going the other way. It's good to know about
    > LabPython though...
    >
    > As of now, it seems to be there is no way to use a COM object without
    > a type library from inside LabView.
    Yes that is true. LabVIEW needs that to configure the Property and
    Methode Nodes correctly. Otherwise it would need to have a special
    Property and Method Node with a configuration dialog similar to the Call
    Library Node, but a LOT more complicated. Not sure many people could
    make use of that, and it would be a very tiring experience trying to get
    things setup in that way, by going through the edit, test, and crash
    cycle over and over again.
    Rolf Kalberm
    atter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • How do you setup a server to use multiple DNS servers that are not connect to each other?

    Is there a way to setup a server that connects to two different domains to use the proper DNS server for name resolution?
    Let say there are two DCs: serverA.subdomaina.domain.com and serverB.subdoamainb.domain.com.  The domains are independent and not connected.  Now you need a common server that is connected to both and need to resolve names from both
    domains.
    Is this possible?
    I have setup a server in a workgroup.  One NIC has the subdomaina.domain.com connection specific suffix and the other nic has the subdomainb.domain.com.  Each NIC has the DNS server listed for the domain it is connected to.
    This configuration will resolve FQDNs of one domain but not the other.  This I believe is due to the fact the server only querys one DNS server and doesn't try the other DNS server.
    Is there any way to make the server try another DNS server, if the first one doesn't have the entry?

    Hi,
    Thank you for posting in Windows Server Forum.
    Here adding to the words of “Tim”, a forwarder is a DNS server on a network used to forward DNS queries for external DNS names to DNS servers outside of that network. You can also forward queries according to specific domain names using conditional forwarders.
    A DNS server on a network is designated as a forwarder by having the other DNS servers in the network forward the queries they cannot resolve locally to that DNS server. You can refer information regarding forwarders and how to configure from beneath link.
    Understanding forwarders
    http://technet.microsoft.com/en-us/library/cc782142(v=ws.10).aspx
    Configure a DNS Server to Use Forwarders
    http://technet.microsoft.com/en-us/library/cc754941.aspx
    Hope it helps!
    Regards.

  • In a group text with two phones that use Imessage and one that does not. The person that does not, does not get my message when its sent in group text. How do i fix this?

    I have a group text with two of my friends. here's each person break down
    person 1 ATT network, using imessage
    person 2 verzion network, using imessage
    person 3 verzion network, using SMS
    All three of us are in a group chat. When person 1 sends a message, person 2 recieves it, but person 3 does not. Then when person 3 sends a message, both person 1 and 2 get it. When person 2 sends an Imessage, person 1 and 3 get it
    so the problem is when person 1 sends an imessage, it doesnt change to sms and person 3 doesnt get it, but person 2's automatilly switches it to green.
    How can person one get their phone to automaticlly switch it to green in group message while keeping on imessage?

    The quote below from http://support.apple.com/kb/HT5760 indicates that it in the situation you describe it should be going as MMS to everyone -- which is not what you are seeing actually happen (and also not what you want to happen if I understand correctly). There may be something else helpful in the link.
    Group messages will be sent using iMessage if all recipients have iMessage enabled. If not, the conversation will be sent as MMS. Group messages use MMS even if the content is text only.

  • How do I download the AfterEffects 6 trial that I want to use on a computer that is not connected to the net?

    I am using a Mac for video editing but due to company rules it can not go on the net with that computer. I have AfterEffects 5 but I need AfterEffects 6 for a project. I wanted to download the trial from Adobe.com but it wants to install on the designated "internet" computer which is of course a Win based computer and not the one that is set up for video editing.
    So how/from where can I get the full AE6 trial downloaded onto my Win based computer and then transfer it to my Mac, then of course activate it on the Mac for the 30 day trial period without having to put that computer on-line?

    I am sorry Juditka but I do not know of any downloads for After Effects 6.0.
    If you are looking to download After Effects Creative Suite 6 then the installation files can be found at Download CS6 products.

  • HT4356 Can I use a wireless printer that is not AirPrint, but is WiFi capable?

    I'm trying to enable my iPhone 4 to a wireless enabled printer but, the printer isn't on the AirPrint list for Canon (PIXMA-MP495).
    My laptop is connected to the printer wirelessly.
    So I guess my question is; Can I enable the printer wirelessly to my phone?

    iOS devices use AirPrint to perform wireless printing, your User Guide will explain how to set it up.  But you need an AirPrint enabled printer or app to provide the right interface.

Maybe you are looking for