The server you are connected to is using a security certificate that CAN NOT BE VERIFIED.

First we have changed nothing, we have not done anything to our Yahoo or Outlook 2003 and suddenly this starts popping up all the time.
We have Windows 7, Office Pro. 2003 and use Outlook 2003 with Verizon Fios and Yahoo is our email server. This message started popping up yesterday out no where, does anyone have any thoughts about it? I have posted it on the Verizon site, however I have more faith in the help I receive here thank you.
The server you are connected to is using a security certificate that CAN NOT BE VERIFIED.
A certificate chain processed but terminated in a root certificate which is not trusted by the trust provider.
Do you want to continue using this server?
Solved!
Go to Solution.

Did you get any email notification of a change to your email servers? So far I only found these settings from 2010
Incoming Server: incoming.yahoo.verizon.net
Server Requires Authentication: Yes
Username: fakeacct
Password: fakepassword
Requires a Secure Connection (SSL): No
Port: 110
Outgoing Server: outgoing.yahoo.verizon.net
Server Requires Authentication: Yes (You can set it to use the same settings as incoming, or manually enter the username and password.)
Requires a Secure Connection (SSL): No
Port: 25
(Big thanks to SomeGirl for this info)
Are these the settings configured in outlook? If these are the setting they may need to be updated
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

Similar Messages

Internet Security Warning - The Server you are connected to is using security certificate that...

Mail Client on Laptop is Windows Live Mail. Mail server outgoing.yahoo.verizon.net. DSL Internet. Long time Verizon customer. Client configuration settings correct according to Verizon. I now get an Interenet Security Warning message whenever I start up the Live Mail Client and send an e-mail. Only happens on sending e-mails. The warning message comes back looking for a YES or NO answer. The message is
"The server you are connected to is using a security certificate that could not be verified."
"A certificate chain processed, but terminated in a root certificate which is not trused by the trust provider."
"Do you want to continue using the server?" "YES or NO"
I click YES in order to successfully send e-mail messages which I do not like to do. I only have to press YES on the first e-mail message that I send. The rest outgoing e-mail work correctly after that first one.
What has Verizonn done to cause the problem on my client software? I have done nothing to change configurations on my Windows 7 and Windos Live Mail laptop. I have done some research, and verified that my computer time and time zone is correct. I am looking for an explanation on why this is happening from Verizon.
HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

If no one has a better idea you may want to unlink Yahoo from VZ. http://forums.verizon.com/t5/Verizon-net-Email/Unlinking-Verizon-email-from-Yahoo-portal/td-p/413475 It is possible to lose data as pointed out in the linked thread.
OR Did you get any indication that your mail server settings were going to change at the end of Sept 2013? A mass email went out for "standard" verizon users earlier this year. I am not sure if this effects Yahoo/VZ settings.
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supp

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
Ian

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

Fix for "The version of the server you are trying to connect to is not supported."

Like many of you, I experienced the following problem with Lion:
"The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem."
I googled and found a workaround for that. It worked for me, maybe worth a try:
http://www.alexanderwilde.com/2011/04/os-x-lion-connection-error-with-afp-and-wo rkaround/
Koos

Same problem here, and the above fixes do not work. I'm running 10.7.5, and the defaults write commands do not appear to work: the plist reverts to its default state after each connection attempt.
I can confirm that the correct values are entered in the plist immediately after performing the defauts write commands (while logged in as root) described in those links, by opening the plist file in xcode. But regardless of rebooting or not, the file immediately reverts to its default values as soon as an afp connection is made. Extremely frustrating. The "defaults write" simply doesn't stick.
I desperately need to pull some data off of a Mac IIci that is running Shareway IP under System 7.5.5. This always worked seamlessly in 10.4 though 10.6: I really need a working solution for 10.7. Thanks for any help...

Problem "The version of the server you are trying to connect to is not supported."

Hi,
I connected a portable hard drive to my Airport Extreme. I can see the hard drive in Airport Utility / Disks but I'm getting an error when I try to connect this disk from Finder / Network / Airport Extreme. I googled and didn't find a solution.
How can I connect the portable disk from Yosemite?
There was a problem connecting to the server “Airport Extreme”.
The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem.

First image
Second image

There was a problem connecting to the server "Neptune"; The version of the server you are trying to connect to is not supported. Please contact your system administrator...

I've seen this problem throughout the website, but nothing hits all my bases.
I'm running OS 10.8.4- just upgraded last month.
I work for a company that predominantly uses PC's. I'm in the Graphics Department.
Neptune is a Windows server but houses all our art files. Since the upgrade I have not been able to access the server either by name (which used to work) or by IP address.
I tried doing the suggested "terminal" fix but that did not work.
I must say, mail works. Internet works. Wi-fi works.
Any other suggestion?

Hi AppleRocks
Glad you've found a workaround however this is a common problem for people trying to connect via AFP as a registered user to a legacy server.
Whilst connecting via SMB and as a 'guest' should provide a temporary solution some people need to connect via AFP as a registered user to access all of their servers files successfully.
There are several sudo commands and discussions on this subject (Believe me I've read most of them ) but I have found this thread to be the simplest and most effective:
Connecting to legacy AFP services - Apple Support
Hope this helps future readers of this thread!

Downloaded mavericks and now receive an error "the version of the server you are trying to connect is not supported" However I don't have a server I have a storage unit. How do I re-establish the connection

I downloaded Mavericks and I now receive an error when I try to connect to my storage unit. I receive an error message that the 'server is not supported'. How do I correct this? Or how can I restore my previous operation system

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

When I connect to my Iomega iConnect I get the following message: "The version of the server you are trying to connect to is not supported." - Any ideas?

Thanks in advance!

Same problem here, and the above fixes do not work. I'm running 10.7.5, and the defaults write commands do not appear to work: the plist reverts to its default state after each connection attempt.
I can confirm that the correct values are entered in the plist immediately after performing the defauts write commands (while logged in as root) described in those links, by opening the plist file in xcode. But regardless of rebooting or not, the file immediately reverts to its default values as soon as an afp connection is made. Extremely frustrating. The "defaults write" simply doesn't stick.
I desperately need to pull some data off of a Mac IIci that is running Shareway IP under System 7.5.5. This always worked seamlessly in 10.4 though 10.6: I really need a working solution for 10.7. Thanks for any help...

I have problem with authorizing my computer. After i entered my AdobeID click authorize, it starts loading, but then it announces that an error has occured; Connection error. make sure you are connected to internet! haloo, I am. what can i do. its not the

help

Unfortunately I am running in circles as the result is the same.
Thank you for the link but I have already had this page provided to me by my school. Nevertheless, I followed your advise, downloaded the latest version once again and restarted my computer. Again, I am not able to get my computer authorised, with or without an ID. I get either of the two messages : 1) Microsoft tells me there is a problem with my computer. 2) Adobe tells me I have no internet access and in order to proceed I should gain internet access.
That is the reason why I have today purchased an AVG software. I have additionally purchased the service of having the AVG software installed on my computer by an AVG representative remotely by allowing him temporary access to my laptop. Subsequently he installed the software successfully, run all necessary checks, optimised my computer and there are currently no problems with it whatsoever.
I have then asked him for this additional favour to watch me trying to download the e-book using your software, just in case I am doing something incorrectly. He agreed and upon my attempting to download the e-book again, the same problems occurred. He followed the steps himself - again no joy. He then advised me to ask Adobe for help. In his opinion the program Adobe stops responding and there is nothing more he could do to help me. I had his reassurances that my computer is in full working order and the problem does not lie here.
I am back to you asking you for help. I am attaching here photos of the two messages that keeping popping up whenever I try to download the e-book.
Is there anything at all you can do to help me? I quite need this e-book for my exam which is fast approaching. I would be really grateful if you could sort something out...
Thank you in advance. I look forward to hearing from you.
Stela

Which TMG in the farm you are connected to

Hello,
I have website published through MS TMG2010 which is array of 4 servers, sometimes i face issues with the website and at the end its related to TMG, so i need to know how to configure TMG or IIS to know which TMG server i am connected to.
in IIS you can do this by configure the HTTP response but i dont know how to do so in TMG
any help plz ?

Hi,
Thank you for your post here.
As far as I know, TMG has no option for us to do that. You may capture the packets and distinguish them based on IP.
Best Regards
Quan Gu

Why can't I use the cellular network on my iPhone even though the cellular settings are on I have tried to reset and that did not do anything at all

I have tried the rest and still not letting me surf the web or download any apps or go on Facebook won't let me use iMessage to txt other iPhones

Have you tried the steps in the article below?
iOS: Troubleshooting Personal Hotspot

WebPart is raising the following error "Invalid data has been used to update the list item.The field you are trying to update may be read only"

I have created a farm solution and then i deploy it to SharePoint server, the code looks as follow, and i use it to update a page info values (as the current page values represents old info):-
[ToolboxItemAttribute(false)]
public partial class VisualWebPart1 : WebPart
// Uncomment the following SecurityPermission attribute only when doing Performance Profiling using
// the Instrumentation method, and then remove the SecurityPermission attribute when the code is ready
// for production. Because the SecurityPermission attribute bypasses the security check for callers of
// your constructor, it's not recommended for production purposes.
// [System.Security.Permissions.SecurityPermission(System.Security.Permissions.SecurityAction.Assert, UnmanagedCode = true)]
public VisualWebPart1()
protected override void OnInit(EventArgs e)
base.OnInit(e);
InitializeControl();
using (SPSite site = new SPSite(SPContext.Current.Site.Url))
using (SPWeb web = site.OpenWeb())
SPList list = web.Lists["Pages"];
web.AllowUnsafeUpdates = true;
foreach (SPListItem items in list.Items)
items["Author"] = "SharePoint";
items["Created"] = "01/08/2014 01:44 PM";
items.Update();
list.Update();
web.AllowUnsafeUpdates = false;
protected void Page_Load(object sender, EventArgs e)
but when i try adding this web part to a page i got the following error:-
Invalid data has been used to update the list item.The field you are trying to update may be read only
so can anyone advice?

i only changed lines bitween
web.AllowUnsafeUpdates = true;
and
web.AllowUnsafeUpdates = false;
and other parts of code remains without change
so it will updates all pages in current web
yaşamak bir eylemdir

I am having trouble accessing the authorisation server. I get this message even though I am on line 'Connection Error. Digital Editions could not connect to the activation server. Please check you are connected to the internet

Connection Error.
Digital Editions could not connect to the activation server. Please make sure you are connected to the internet.
I am using a PC windows 8

You should check if Firewall Adobe Digital Edition blockt.

"the feature you are trying to use is on a network resource that is unavailable", SQL Server 2008

when I try to install SQL Server enterprise 2008, during the installation processing, an error information occurs, it said that 'the feature you are trying to use is on a network
resource that is unavailable', it is missing this file "sql_engine_core_shared.msi".
Even I locate an available file with the same version for the installation, it still alert this error information. But actually the file exists in the directory that belong to the whole installation directory.
Because of this problem, I can`t complete the whole SQL Server installation. My computer OS is windows 7 Enterprise SP1, 32-bit, with .Net Framework 4.0. And I has installed Visual Stdio 2008, could this program impact the installation of SQL Server 2008?
Any good ideas, Thanks.

Hi,
SQL Server 2008 Enterprise dose not support Windows
7. You can try SQL Server Standard, or SQL
Server Developer, or SQL Server Express. Please
check this link:
http://msdn.microsoft.com/en-us/library/ms143506.aspx
[Personal Site] [Blog] [Facebook]

The server you are connected to is using a security certificate that CAN NOT BE VERIFIED.

Similar Messages

Maybe you are looking for