Hyperlink - Cannot open specified file in excel

I have created an excel document with hyperlinks to other documents on our drive. For some reason when I click on the links i get the above message. But the file pathway that is correct.
I have over 200 link and do not want to enter them in again manually.
PLease help

Hi,
Which version of Excel are you using?
Have you changed the file path where the linked documents are saved?
If we manually modify a problematic link, will it work correctly then?
Please also check the following setting of your Excel. Click File > Options > Advanced, scroll to the General section, then, click the Web Options button. Make sure the check box before "Update links on save" is not checked under Files
tab.
In addition, we may consider to use VBA code to refresh/update your hyperlinks to see if it will make any difference. Since we are not the best resource for coding, you can post coding related question in the following forum:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
Thanks for your understanding and support.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

Obiee 11.1.1.5.0 cannot open .iqy file in Excel 2010

Hi,
when I try to open a .iqy file in Excel 2010 (windows 7) I get the Error:
Unable to open http://answers.activision.com/analytics/saw.dll?Download. The hyperlink cannot be followed to the destiantion.
In Excel 2007 (windows XP) I can open/refersh this query without any problems.
I think this is only a setting issue, but I don't have an idea what I have to change.
Maybe someone can help
Thanks and regards
Chris

Go to View Options where you will select Narrative View or Pivot Table under that you can see a Filters,Just click and export the results to excel it will work,Below the screen shot for your reference.
Recordings_2 - Download - 4shared
Mark if helps.
Thanks,

Cannot Open .xls files in Excel 2010

Before we start, I would just like to say, I've read probably 9 or 10 other threads with no help.
I cannot open any .xls file. Unfortunately the user has already associated the file type with Adobe Reader, so I cannot just double click the files to open them. I have tried the follow fixes with no solution:
-Open With .. > EXCEL.exe (I double click the application and nothing happens)
-Going in to the file extensions page and associating it with the EXCEL.exe application there, but same thing, nothing happens
-I have tried going into the registry and renaming the "OFFICE12"'s to "OFFICE14". Nothing happened
-I have tried going into the Excel folder options and checking off and unchecking "Ignore Other Applications That Use DDE"
-I have searched for the "Microsoft Application Virtualization DDE Launcher" application with no luck
of finding it
-I have tried re-installing and repairing Office 2010
I'm out of idea and have no idea what to try next. Any ideas?

Hi,
The registry key which could affect you open the .xls by double click is the following:
Important
This method is related to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you do it carefully. For added protection, back up the registry before you modify it. Then, you can restore
the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756) How to back up and restore the registry in Windows
HKEY_CLASSES_ROOT\Excel.Sheet.8
I would suggest you rename the registry key, and then repair the Office programs to create a new key.
For example:
Rename “Excel.sheet.8” to “Excel.sheet.8.old”.
Then repair the Office programs:
Start > Control Panel > Programs and Features > click the Office 2010 program that you want to repair, then click Change > Repair > Continue.
You might need to restart your computer after the repair is complete.
Sincerely
Rex Zhang
Rex Zhang
TechNet Community Support

I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP

Did you try to open teh fle by double-clicking its icon? If the file was made with an older version of Office, you may get that message. Try opeing PP and, from its "File" menu, see if you can open the ppt. I've foundthat often gets around that message and then yo ucan save the file from the newer version.
If that doesn't work, consider asking in the Microsoft Office: Mac forums here:
Office for Mac forums
PowerPoint is not an Apple product and it seems a lot of people around here avoid Office.

After file encryption in Windows 7, Excel cannot open .xlsx file

I just moved all my files to a new laptop with Windows 7. I was using Excel 2007 and Windows XP on the OLD laptop. The NEW laptop has Windows 7 Ultimate and Excel 2010. I turned on file encryption (via Windows File Explorer) and now I'm
unable to open most Excel files.
The error message says: "Excel cannot open the file 'ABC.xlsx' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file."
I can open the file just fine if I use the backup version from the old laptop. It appears that the Windows 7 file encryption damaged the file from Excel's perspective. No other applications are showing issues and not all .xlsx files are failing.
Any ideas, please?
Thanks,
Ken

This is not a solution but a possible work around to see/salvage the contents of your file. If you have a Google Account
Go to Google Docs (https://docs.google.com)
Log in with your credentials
Upload the troublesome files (xlsx, docx etc)
If you are lucky Google may be able to salvage their contents.
Once uploaded, you can always download the file from Google in a variety of formats

Excel cannot open the file

I am trying to build a dashboard in 4.5 Professional. When I open the Xcelsius file I get the following message "Excel cannot open the file 'im5.xlsx' because the file format or file extention is not valid. Verify that the file has not been corrupted and that the file extention matches the format of the file"
I went to Task Master killed Excel and then got a new message "the document 'im5.xlsx' caused a serious error the last time it was open. Would you like to continue opening it?" If I say "Yes" the message in the first paragraph re-appears. However, I then cannot find Excel in Task Manager again. I therefore assume Excel is not running but the problem persist, I cannot openthe Dashboard. Any ideas how to solve this problem?
I run XP and Office 2007. I have build many Dashboards on 4.5 and also run Engage 2008.
Niel

Hi Niel
Can you save the Excel file as 2003 compatible and try again?
Regards
Charles

I get a message saying that "Excel cannot open the file

Every now and then, when I try opening an Excel file, I get a message saying that "Excel cannot open the file 'file.xlsx' because the file format or the file extension is not valid. Verify that the file has not been corrupted and that the file extension
matches the format of the file.

I see this most often when a file has been transferred around a lot and gets corrupted due to bad sectors on hard drives,
bad thumb drives, etc...
Occasionally, I find a repair utility that will....kind of....fix it. You tend to lose all formatting and usually the user
would have to spend more time doing than life than simply starting from scratch. If on a file server, shadow copies
(previous versions) are a god send.
If it happens completely randomly, does it happen more often to the same group of people? Perhaps an update malfunctioned?
Reinstall Office? Try XLSX Open File Tool for recovery your documents (http://www.xlsx.openfiletool.com/)
There could be so many reasons this could happen, but all the above is where I'd start.
Also read this
https://groups.google.com/forum/#!topic/xlsx-viewer-download/Yf8eudHMWv8

Excel cannot open the file beacuse the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file [help]

Hi,
I have a excel file that I have been using since beginning of year.
Yesterday, I tried to open it but a message comes out "
Excel cannot open the file beacuse the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file"
After I click yes, the page is blank. The file is about 400kb in size.
I have try open and repair and third party repair program and not working also.
I would appreciate a lot if you can help me.
Thank you very much.

Per your post, this problem might be caused by malware on the affected machine.
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/09/07/quot-cannot-open-the-file-because-the-file-format-or-extension-is-invalid-quot-opening-office-files.aspx
In order to clean your machine, run Microsoft Safety Scanner (http://www.microsoft.com/security/scanner/en-us/default.aspx) to kill the malware, and then repair Excel file itself.
If this is not the case, feel free to post back and let me know. Thanks.
Tony Chen
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Excel cannot open the file 'file.xlsx' because the file format

Every now and then, when I try opening an Excel file, I get a message saying that "Excel cannot open the file 'file.xlsx' because the file format or the file extension is not valid. Verify that the file has not been corrupted and that the file extension
matches the format of the file.

Hi,
Which Excel version are you using? As far as I know, this issue is caused by malware on the affected machine.There are now two known variants of malware which causes this problem: Win32/Crilock.A and
Win32/Buma!rts. They have both been identified as a new family of ransomware.
We'd better clean your machine, run Microsoft Safety Scanner (http://www.microsoft.com/security/scanner/en-us/default.aspx).
For more detail information, please refer to the following link:
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/09/07/quot-cannot-open-the-file-because-the-file-format-or-extension-is-invalid-quot-opening-office-files.aspx
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Excel cannot open the file because the file format or file extension is not valid

pls help

Hi,
In regarding of the issue, please provide us more information to assist you better.
Which Office version are you using? Office 2013 or other.
Did the issue occur with the special file or every file?
Then, based on your error message, this problem has been confirmed to be caused by malware on the affected machine. There are now two known variants of malware which causes this problem: Win32/Crilock.A and
Win32/Buma!rts. They have both been identified as a new family of ransomware.
In order to clean your machine, run Microsoft Safety Scanner (http://www.microsoft.com/security/scanner/en-us/default.aspx). If infected, Safety Scanner should clean the virus from
the system, however it will not repair corrupted files. You will still need to restore those from a backup. A detailed analysis of affected files submitted to Microsoft for investigation has revealed the files are encrypted with a private
and public key. The files cannot be recovered without the private key, which is more than likely held by the attacker. The premise of ransomware is such that if a person pays the ransom the key is provided to "unlock" the files.
For more detail information, please refer to the following link:
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/09/07/quot-cannot-open-the-file-because-the-file-format-or-extension-is-invalid-quot-opening-office-files.aspx
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in
Office programs.

SSIS package "The Microsoft Jet database engine cannot open the file"

Dear all,
I am trying to import data from an excel spreadsheet which is save on application sharing server. When I try to save same file locally (On my desktop) my package has no problem to read it. Problem comes when I change the file path to the share location
I am getting below error message,
"Version 11.0.2100.60 for 32-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 13:26:46 Error: 2014-12-05 13:26:50.30 Code: 0xC0202009 Source: Incremental MasterStyle DL
Connection manager "Excel Connection Manager" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database
Engine" Hresult: 0x80004005 Description: "The Microsoft Jet database engine cannot open the file ''. It is already opened exclusively by another user, or you need permission to view its data.". End Error Error:
2014-12-05 13:26:50.30 Code: 0xC020801C Source: Data Flow Task 1 Excel Source [36] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection
manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-12-05 13:26:50.30
Code: 0xC0047017 Source: Data Flow Task 1 SSIS.Pipeline Description: Excel Source failed validation and returned error code 0xC020801C. End Error Error: 2014-12-05 13:26:50.30 Code: 0xC004700C
Source: Data Flow Task 1 SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-12-05 13:26:50.30 Code: 0xC0024107 Source: Data Flow Task 1
Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 13:26:46 Finished: 13:26:50 Elapsed: 3.401 seconds. The package execution
failed. The step failed."
I am trying to run this package as an sql server agent job and server is installed on my Machine. I have created proxy account with my own credential to execute it. I have full excess to the spread sheet and can open it in an excel program. Please
suggest what could be the reason why sql job is not able to access this spreadsheet. I can think of below reasons
File is password protected and I am not using its password to unlock it?
My domain account is a part of It Admin group with high previllages
when I installed my SQL server I installed it as a standalone instance of SQL server?
please advise.
regards
JKH

Hi Jahangir,
Based on the error message that "The Microsoft Jet database engine cannot open the file ''. It is already opened exclusively by another user, or you need permission to view its data.", there are two causes:
The account that SQL Agent is using does not have the correct permissions for the file or for the folder that contains the file.
Another process or user has the file open.
The following resolutions correspond to the previous list of causes:
Since you use a network path to the file (UNC), check the account permissions on the share, the file, and the folder.
The "another user" may be Microsoft Visual InterDev. Close any Visual InterDev projects that contain a data connection to the file. Please close all instances of excel file and re-run the package.
Besides, we can use a tool like
SQL Server Profiler to see what is happening when you run the package.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Cannot open the file because the open options are incorrect

I'm trying to iterate through a folder of images, open each one of them, duplicate them into another photoshop file and close the individual image. This code works great on a PC (Photoshop CS3), but when I run it on our macs (Photoshop CS3) I will receive the following error on random images. "Error: Cannot open the file because the open options are incorrect" Does anyone know how to solve this problem? I've read about possibly setting the OpenDocumentType but have not seen an example anywhere. This error will sometimes occur after loading in one image or sometimes after 20 images. Sometimes I run it on the same directory multiple times all with various points of error. Sometimes every images is loaded. Any help would be much appreciated. Sample code is below.
i //CODE BELOW
i //allows the user to select an folder full of images
b var inputFolder = Folder.selectDialog("Select a folder that contains the files you want added as layers.");
b var fileList = inputFolder.getFiles();
b var tempRef = app.open(tempName);
b for (var i = 0; i < fileList.length; i++)
b {
b var tempName = fileList[i];
b var tempStringName = fileList[i].toString();
i //used to check if the file in the directory does in fact contain the .png extension
b var reducedFileName = tempStringName.substring(tempStringName.lastIndexOf("/")+1);
b if(reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".png" || reducedFileName.substring((reducedFileName.length - 4),(reducedFileName.length)) != ".PNG")
b {
i //setting reference to opened docuement PNG file
i //This seems to be the section throwing the error. Surrounding with Try Catch revealse the Error noted above
b var tempRef = app.open(tempName);
i //setting a tempName variable to the PNG file name
b var tempName = app.activeDocument.name;
i //setting reference to the active layer in the file
b var graphicLayer = app.activeDocument.activeLayer;
i //setting the PNG layer name to the PNG file
b tempRef.layers[0].name = tempName;
i //duplicating the image onto the opened Photoshop file
b tempRef.layers[0].duplicate(backRef);
i //closing the original PNG file without saving
b tempRef.close(SaveOptions.DONOTSAVECHANGES);
b }
b }

It looks as if the folder contains non Photoshop files, one way around the problem would be to change
var fileList = inputFolder.getFiles();
To specify the file types you want to process IE:
var fileList = inputFolder.getFiles(/\.(jpg|tif|psd|crw|cr2|nef|dcr|dc2|raw)$/i);

Cannot open pdf files with Firefox's built-in pdf viewer

This just started (I think) with Firefox 37.01. This is on Win7-X64. I cannot open pdf files with the Firefox built-in pdf viewer. If I click on the file or try to open it from within Firefox, it brings up a "opening filename.pdf" message. If I select the "Open with" radio button as 'Firefox (default),' it just keeps looping on this process; it never opens. In Tools => Options => Applications, Portable Document Format (PDF) is indicated as 'Preview in Firefox.' I've never had any other PDF viewer installed on this computer. I've tried disabling all plug-ins and extensions, but it still doesn't work. I searched for solutions but haven't found any for this specific issue.
Thanks for the help.

Hello,
Have you tried, to start Firefox in safemode you can do so by following these steps
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

896358: Cannot open CHM files

I hope this isn't indicative of MS's patch quality continuing to take a nosedive.
I need for certain users to be able to open CHM files from a network share. Easy cheesy. Sadly the 'workarounds' seem to function (or not) wildly differently across OS versions and architecture.
I have Win7 64 and 32 bit machines. 64 bit work fine when the 'allowed' URLs are specified in the registry (HKLM\Software\Microsoft\HTMLhelp\1.x\ItssRestrictions - value UrlAllowList). No zone modification needed.
However;
32 bit Win 7 machines do not work with this method. Unless the user is a local administrator (not happening). I cannot get them to work at all. Can anyone please help me understand what needs to be done differently for these clients?
Thanks!

Hi n4,
Have you tried to add a MaxAllowedZone value under the registry key?
HKLM\Software\Microsoft\HTMLhelp\1.x\ItssRestrictions
If not, you may take a try:
1. Right-click the ItssRestrictions subkey, point to New, and then click DWORD Value.
2. Type MaxAllowedZone, and then press Enter.
3. Right-click the MaxAllowedZone value, and then click Modify.
4. In the Value data box, type 1, and then click OK.
5. Quit Registry Editor.
If the above steps do not work for you, please see
http://support.microsoft.com/kb/896358 for alternatives.
More threads for reference:
https://social.technet.microsoft.com/Forums/ie/en-US/3cd184ca-6a16-4039-a8a0-a2538613d604/cannot-open-chm-files?forum=w7itprogeneral
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I am working in text edit and cannot open my file. Error message says it is in the wrong format, truncated or corrupted. what to do?

I am working in text edit and cannot open my file. Error message says it is in the wrong format, truncated or corrupted. what to do?

Try opening Disk Utility in your Applications-Utilities folder and repair permissions.

Hyperlink - Cannot open specified file in excel

Similar Messages

Maybe you are looking for