Hyperlink in Mail from ABAP

Hi,
I am developing one report whcih will generate mails. I need to add one hyperlink in the generated mail Any clue, how can i add the link in mail.
Br,
Piyush

Hi.,
Using HTML code you can send link in mail.,
use
<a href=''www.sdn.sap.com"> SDN </a>
also check this wiki., http://wiki.sdn.sap.com/wiki/display/Snippets/ABAP-AMailtoOutlookwithSAPLink
hope this helps u.,
Thanks & Regards,
Kiran

Similar Messages

Set Sender of Mail from Abap

Hi,
I use SO_NEW_DOCUMENT_SEND_API1 function module to send a mail from abap code.
But I want to set the sender. Can I realize it?
Regards
Angela

Refer this thread -
Fill "sender id" in SO_NEW_DOCUMENT_SEND_API1
Regards,
Amit

Function modules to send mails from ABAP

hi
can any one give me the function module to send mails from abap to yahoomail or gmail etc. i will be grateful if any one can provide me a sample code.
thanks & regards
rajesh

Hi,
check this site:
http://www.sapdevelopment.co.uk/reporting/email/email_mbody.htm
Replace the
p_email(40) type c default '[email protected]' .
with ur yahoo or gmail id
This is the FM that u needed:
'SO_NEW_DOCUMENT_ATT_SEND_API1'
http://www.kabai.com/abaps/z00.htm
http://www.sapdevelopment.co.uk/reporting/email/emailhome.htm
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
/people/thomas.jung3/blog/2004/09/07/sending-e-mail-from-abap--version-46d-and-lower--api-interface
Hope this solves your question.
Best Regards,
Anjali

How to send mail from ABAP code?

Hi,
I need to send e-mail from ABAP Code .
e.g: If sy-subrc ne 0.
     ( send e-mail to "[email protected]" )
       endif.
Please provide me any Function module for this or any code.
Correct answear will be rewarded my maximum points.
Thanks & Regards,
Gaurav.

Check this code sample
* Send mail
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test Subject'.
loop at htmllines.
    mailtxt = htmllines.
    append mailtxt.
endloop.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
       exporting
            document_data              = maildata
            document_type              = 'HTM'
            put_in_outbox              = 'X'
       tables
            object_header              = mailtxt
            object_content             = mailtxt
            receivers                  = mailrec
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
if sy-subrc 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Regards.

Sending e-mail from ABAP

We need to send email to an external adress from ABAP. Does anybody know a function module or method to do this, maybe even with sample coding?
Best regards
Dirk

There are some weblogs here:
4.6x and lower:
/people/thomas.jung3/blog/2004/09/07/sending-e-mail-from-abap--version-46d-and-lower--api-interface
6.10 and higher:
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface

To post a mail from ABAP program

dear friends
              how to post a mail to SAP inbox of a particular user from ABAP program.

get the spool no of the program
we have standard program rstxpdf4 through that convert it to pdf
and through f.m SO_NEW_DOCUMENT_ATT_SEND_API1 u can send mail.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
   EXPORTING
     DOCUMENT_DATA                    = x_document_data
     PUT_IN_OUTBOX                    = 'X'
     COMMIT_WORK                      = 'X'
   TABLES
     PACKING_LIST                     = it_packing_list
     CONTENTS_BIN                     = it_contents_bin
     CONTENTS_TXT                     = it_contents_txt
     RECEIVERS                        = it_receivers
EXCEPTIONS
    TOO_MANY_RECEIVERS               = 1
    DOCUMENT_NOT_SENT                = 2
    DOCUMENT_TYPE_NOT_EXIST          = 3
    OPERATION_NO_AUTHORIZATION       = 4
    PARAMETER_ERROR                  = 5
    X_ERROR                          = 6
    ENQUEUE_ERROR                    = 7
    OTHERS                           = 8 .
IF SY-SUBRC <> 0.
   retcode = sy-subrc.
   perform protocol_update.
else .

Send mail from abap from internal mail id

Hiiii,
Is it possible to send mail from internal mail id by using abap program ?

Hi,
I did't get your question, do you want to send mail using ABAP coding. If thats what is your requirement
check out with link:
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/multiple%252battachment%252bon%252be_mail
Tks,
Krishna..

Send mail from ABAP

Hi all,
do you know if i can send email from ABAP, i specify that i don't have WAS. I understand that i must install SAPConnect and SMTP plug-in but in my case will that function ?
Regards,

Hi
See following routine it will send you data as attachment.
FORM send_mail.
it_doc_chng-obj_name = text-016.
it_doc_chng-obj_descr = text-016.
DESCRIBE TABLE it_objtxt LINES g_lines.
READ TABLE it_objtxt INDEX g_lines.
it_objpack-doc_size = ( g_lines - 1 ) * 255 + STRLEN( it_objtxt ).
it_objpack-doc_type   = 'RAW'.
APPEND it_objpack.
it_objpack-head_start = 1.
it_objpack-head_num   = 0.
it_objpack-body_start = 1.
it_objpack-transf_bin = 'X'.
it_objpack-body_num   = g_lines.
it_objpack-doc_type   = 'RAW'.
it_objpack-obj_name   = 'ATTACHMENT'.
it_objpack-obj_descr = g_file.
APPEND it_objpack.
completing the recipient list
SORT it_vmail.
DELETE ADJACENT DUPLICATES FROM it_vmail.
IF l_client NE 'P'.
    it_reclist-receiver = p_email.
    it_reclist-express = 'X'.
    it_reclist-rec_type = 'U'.
    APPEND it_reclist.
ELSE.
    LOOP AT it_vmail.
      it_reclist-receiver = it_vmail-smtp_addr.
      it_reclist-express = 'X'.
      it_reclist-rec_type = 'U'.
      APPEND it_reclist.
    ENDLOOP.
ENDIF.
it_rec_mail[] = it_reclist[].
IF NOT p_copy IS INITIAL.
    it_reclist-receiver = p_copy.
    it_reclist-express = 'X'.
    it_reclist-copy = 'X'.
    it_reclist-rec_type = 'U'.
    APPEND it_reclist.
ENDIF.
CLEAR it_download[].
it_download[] = it_objtxt[].
**********Sending the mail with attachment*****************
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_MAPI'
    EXPORTING
      document_data              = it_doc_chng
      put_in_outbox              = 'X'
      commit_work                = 'X'
    TABLES
      packing_list               = it_objpack
      contents_bin               = it_objtxt
      contents_txt               = it_objtxt
      receivers                  = it_reclist
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      OTHERS                     = 99.
CASE sy-subrc.
    WHEN 0.
      IF p_update = 'X'.
        PERFORM reference_update.
      ENDIF.
     PERFORM down_load.
      WRITE:/01 text-019.
      SKIP.
      LOOP AT it_rec_mail.
        FORMAT COLOR 5 INTENSIFIED OFF.
        WRITE:/01 text-010,20 it_rec_mail-receiver.
      ENDLOOP.
      ULINE.
    WHEN 1.
      WRITE: / text-012.
    WHEN 2.
      WRITE: / text-013.
    WHEN 4.
      WRITE: / text-014.
    WHEN OTHERS.
      WRITE: / text-015.
ENDCASE.
REFRESH:it_objpack,
          it_objtxt,
          it_reclist,
          it_rec_mail.
CLEAR:it_objpack,
        it_objtxt,
        it_reclist,
        g_lines,
        it_rec_mail.
ENDFORM.                    " send_mail
Regards
Suresh Babu Karanam

Abt sending a mail from abap to yahoo

Anyone can guide with the code of how to send mail from SAP to Yahoo using the ABAP code

Try this....
<a href="http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm">http://www.sapdevelopment.co.uk/reporting/email/attach_xls.htm</a>

Garbage in mail body when sending mail from abap code

Hi abapers,
i am sending mail from my program and when the data reaches in mailbox it is as follows.
佐呓义⁇䅄䕔䌉乏啓䕍⁒低䌉乏啓䕍⁒䅎䕍䤉⁃䥔䭃⁔低म䍉吠䍉䕋⁔䕄䍓䤉⁃䥔䭃呅匠䅔啔॓
which is not proper.
I'm attaching the following part of code which i have used.Please let me know if i've made any mistake over here.
DOCDATA-OBJ_LANGU = SY-LANGU.
DOCDATA-OBJ_NAME = 'Mail_Excel_File'.
DOCDATA-OBJ_DESCR = 'Closed Customer Complaints'.
DOCDATA-SENSITIVTY = 'F'.
OBJTXT =
'Attached compensation request is pending for your approval as on '.
APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'today. Please find the attached Field Investigation Report.'.
APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'This is auto generated mail.Please do not reply to this mail.'.
APPEND OBJTXT. CLEAR OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ     TABLE OBJTXT INDEX TAB_LINES.
DOCDATA-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
DESCRIBE TABLE I_CONTENTS_HEX LINES TAB_LINES.
* OBJPACK-DOC_SIZE = TAB_LINES * 255 + STRLEN( OBJTXT ).
OBJPACK-DOC_SIZE = TAB_LINES * 255 .
OBJPACK-TRANSF_BIN = 'X'.
* OBJPACK-TRANSF_BIN = SPACE.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'XLS'.
* DOCDATA-OBJ_NAME = 'Excel_File_Attachment1'.
* OBJPACK-OBJ_DESCR = FILE_NAME.
OBJPACK-OBJ_DESCR = P_FILE.
APPEND OBJPACK.
RECLIST-RECEIVER = RECIEVER.
RECLIST-REC_TYPE = 'U'.
RECLIST-EXPRESS = 'X'.
APPEND RECLIST.
* FM called for sending the mail to the intended recipients
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA = DOCDATA
      PUT_IN_OUTBOX = 'X'
      COMMIT_WORK   = 'X'
    TABLES
      PACKING_LIST = OBJPACK
      CONTENTS_HEX = I_CONTENTS_HEX
      CONTENTS_TXT = OBJTXT
      RECEIVERS     = RECLIST
   EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
what will be the problem..
please help out.
Regards,
Navin
Edited by: navin.c on Jul 10, 2009 8:08 AM

Hi Krishna,
I have attachment properly coming the problem is body of mail its is coming in some unknown language
佐呓义⁇䅄䕔䌉乏啓䕍⁒低䌉乏啓䕍⁒䅎䕍䤉⁃䥔䭃⁔低म䍉吠䍉䕋⁔䕄䍓䤉⁃䥔䭃呅匠䅔啔॓剐䑏䌠䵏⁐低म剐䌠䵏⁐呓呁单䌉䵏⹐删充低म䅌呓䌠䅈䝎䑅䄠॔剐䑏䍕⁔䕄䅔䱉॓䡓䑁⁅䅎䕍匉䅈䕄䌠䑏ॅ䅂䕓丠䵁ॅ䅂䕓䌠䑏ॅ䅂䍔⁈啎䉍剅䴉乁䙕䝃䐠呁ॅ䅓偍䕌䄠䅖䱉䉁䱉呉ख़䉏䕓噒
what may be the problem?
I have used the same logic . im attaching my part of code for your reference .
DOCDATA-OBJ_LANGU = SY-LANGU.
DOCDATA-OBJ_NAME = 'Mail_Excel_File'.
DOCDATA-OBJ_DESCR = 'Closed Customer Complaints'.         "nsc070709+
DOCDATA-SENSITIVTY = 'F'.
* Describe the body of the message
*********new additon of mail content
* CONCATENATE 'Dear' L_FIRSTNAME ','
* INTO OBJTXT SEPARATED BY SPACE.
* APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'Attached compensation request is pending for your approval as on '.
APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'today. Please find the attached Field Investigation Report.'.
APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'This is auto generated mail.Please do not reply to this mail.'.
APPEND OBJTXT. CLEAR OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ     TABLE OBJTXT INDEX TAB_LINES.
DOCDATA-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
* OBJTXT = 'Attached is the FIR PENDING CASES'.
* APPEND OBJTXT.
* DESCRIBE TABLE OBJTXT LINES TAB_LINES.
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
DESCRIBE TABLE I_CONTENTS_HEX LINES TAB_LINES.
* OBJPACK-DOC_SIZE = TAB_LINES * 255 + STRLEN( OBJTXT ).
OBJPACK-DOC_SIZE = TAB_LINES * 255 .
OBJPACK-TRANSF_BIN = 'X'.
* OBJPACK-TRANSF_BIN = SPACE.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'XLS'.
* DOCDATA-OBJ_NAME = 'Excel_File_Attachment1'.
* OBJPACK-OBJ_DESCR = FILE_NAME.
OBJPACK-OBJ_DESCR = P_FILE.
APPEND OBJPACK.
RECLIST-RECEIVER = RECIEVER.
RECLIST-REC_TYPE = 'U'.
RECLIST-EXPRESS = 'X'.
APPEND RECLIST.
* FM called for sending the mail to the intended recipients
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = DOCDATA
      PUT_IN_OUTBOX              = 'X'
      COMMIT_WORK                = 'X'
    TABLES
      PACKING_LIST               = OBJPACK
      CONTENTS_HEX               = I_CONTENTS_HEX
      CONTENTS_TXT               = OBJTXT
      RECEIVERS                  = RECLIST
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      DOCUMENT_TYPE_NOT_EXIST    = 3
      OPERATION_NO_AUTHORIZATION = 4
      PARAMETER_ERROR            = 5
      X_ERROR                    = 6
      ENQUEUE_ERROR              = 7
      OTHERS                     = 8.
COMMIT WORK.
Can anybody help me out on this issue.
Its somewhat on priority.
Edited by: navin.c on Jul 10, 2009 12:58 PM

Not sending a mail from ABAP SAP R/3

Using call function "SO_NEW_DOCUMENT_ATT_SEND_API1" in specific program in SAP R/3, i would like to know if it is possible to send a mail on Outlook webmail box in 4.0B Version of SAP?
Regards, Vincent

There is two way, you could add plugin to see mail from SAP to your Outlook, or you could send mail from sap to a SMTP.
To send mail from SAP to SMTP see transaction SCOT. (if you are running an Unix SAP server, that would be easy)
Regards

PROBLEM SENDING AN XLS VIA E-MAIL FROM ABAP OVER 255 CHARS

Hi
I need some help.
I want to send a XLS attachment from a program via E-Mail.
The problem is I have a lot of columns so I have over 255 chars , I think 500 Chars.
When I send the email, I got it but it is truncate in the 255 position, all the rest doesn't appear
Somebody knows about a solution for this problem?

There was so many discussion about same topic.
Check the below link for more information
How to email an attachment with more than 255 characters?
Thanks
Seshu

Sending e-mail from ABAP Code

Dear All,
I am try to send mail using FM --> SO_DOCUMENT_SEND_API1.
But mail not yet received. I am getting error - RAW3500000000099.
Giving the error as
No suitable conversion found for XLS and not getting the data in english i.e. getting data in ASCII format
I think some Setting problem in SCOT.
Please help me to do the Setting in SCOT or some other place also.
Kindly help me... i am waiting for your valuable responsible.
Regards
Sudhakar

Hi All,
Any body has the idea to maintain SX_OBJECT_CONVERT* function module to convert excel format.
Please guide me what are the FM to convert data from ascii to raw because i am getting the data in ascii format when i am sending email to customer. My login language is english.
Thanks in advance
Regards
Sudhakar

Sending mail from ABAP

Hi Guys,
I know there has been several post about this but i can get it to work.
I have taken the example from function module.
The sending of an express document to an internal user work.
But as soon as i use receiver type U i dont get anything send.
In the end i get
&ADU00100000094 : succesfully sent
RASS            : succesfully sent
This means that the [email protected] has been deleted an it is only showing the id.
Here is my code.
REPORT ZMON_SEND_MAIL3                         .
DATA: OBJCONT LIKE SOLISTI1 OCCURS 5 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: ENTRIES LIKE SY-TABIX.
DATA: NAME(15).
* Fill the document
DOC_CHNG-OBJ_NAME = 'URGENT... Not'.
DOC_CHNG-OBJ_DESCR = 'Read at once !'.
DOC_CHNG-SENSITIVTY = ''.
OBJCONT = 'Hey guys, time for lunch !!!'.
APPEND OBJCONT.
OBJCONT = 'Lets get going !'.
APPEND OBJCONT.
DESCRIBE TABLE OBJCONT LINES ENTRIES.
READ TABLE OBJCONT INDEX ENTRIES.
DOC_CHNG-DOC_SIZE = ( ENTRIES - 1 ) * 255 + STRLEN( OBJCONT ).
* Fill the receiver list
CLEAR RECLIST.
RECLIST-RECEIVER = sy-uname. " replace with <login name>
RECLIST-REC_TYPE = 'B'.
RECLIST-EXPRESS = 'X'.
APPEND RECLIST.
CLEAR RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
* Send the document
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_TYPE = 'RAW'
          DOCUMENT_DATA = DOC_CHNG
          PUT_IN_OUTBOX = 'X'
     TABLES
          OBJECT_CONTENT = OBJCONT
          RECEIVERS      = RECLIST
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          OPERATION_NO_AUTHORIZATION = 4
          OTHERS                     = 99.
    CASE SY-SUBRC.
      WHEN 0.
        LOOP AT RECLIST.
          IF RECLIST-RECEIVER = SPACE.
            NAME = RECLIST-REC_ID.
          ELSE.
            NAME = RECLIST-RECEIVER.
          ENDIF.
          IF RECLIST-RETRN_CODE = 0.
            WRITE: / NAME, ': succesfully sent'.
          ELSE.
            WRITE: / NAME, ': error occured'.
          ENDIF.
        ENDLOOP.
      WHEN 1.
        WRITE: / 'Too many receivers specified !'.
      WHEN 2.
        WRITE: / 'No receiver got the document !'.
      WHEN 4.
        WRITE: / 'Missing send authority !'.
      WHEN OTHERS.
        WRITE: / 'Unexpected error occurred !'.
    ENDCASE.
I have test through the work place that I am able to send email out of the house.
So the SMTP server is working.
Any help is appreciated.

Hi,
Try this way
REPORT ZMON_SEND_MAIL3                         .
DATA: OBJCONT LIKE SOLISTI1 OCCURS 5 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: ENTRIES LIKE SY-TABIX.
DATA: NAME(15).
* Fill the document
DOC_CHNG-OBJ_NAME = 'URGENT... Not'.
DOC_CHNG-OBJ_DESCR = 'Read at once !'.
DOC_CHNG-SENSITIVTY = ''.
OBJCONT = 'Hey guys, time for lunch !!!'.
APPEND OBJCONT.
OBJCONT = 'Lets get going !'.
APPEND OBJCONT.
DESCRIBE TABLE OBJCONT LINES ENTRIES.
READ TABLE OBJCONT INDEX ENTRIES.
DOC_CHNG-DOC_SIZE = ( ENTRIES - 1 ) * 255 + STRLEN( OBJCONT ).
* Fill the receiver list
CLEAR RECLIST.
RECLIST-RECEIVER = sy-uname. " replace with <login name>
RECLIST-REC_TYPE = 'B'.
RECLIST-EXPRESS = 'X'.
APPEND RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_TYPE = 'RAW'
          DOCUMENT_DATA = DOC_CHNG
          PUT_IN_OUTBOX = 'X'
     TABLES
          OBJECT_CONTENT = OBJCONT
          RECEIVERS      = RECLIST
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          OPERATION_NO_AUTHORIZATION = 4
          OTHERS                     = 99.
CLEAR RECLIST. REFRESH RECLIST.
RECLIST-RECEIVER = '[email protected]'.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
* Send the document
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
     EXPORTING
          DOCUMENT_TYPE = 'RAW'
          DOCUMENT_DATA = DOC_CHNG
          PUT_IN_OUTBOX = 'X'
     TABLES
          OBJECT_CONTENT = OBJCONT
          RECEIVERS      = RECLIST
     EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          OPERATION_NO_AUTHORIZATION = 4
          OTHERS                     = 99.
COMMIT WORK.
aRs

Reading mail from ABAP

Hi,
I need to do some processing on the e-mails on the SAP inbox folder of some users...
I've been trying with FM SO_DOCUMENT_READ_API1, but I get various exceptions as I try with different document ids...
Maybe I'm not getting the document id the right way
can someone point me in the right direction here?

Hi,
Please check this thread perhaps it may help.
Re: Read Email Content
Regards,
Ferry Lianto

Hyperlink in Mail from ABAP

Similar Messages

Maybe you are looking for