To post a mail from ABAP program
dear friends
how to post a mail to SAP inbox of a particular user from ABAP program.
get the spool no of the program
we have standard program rstxpdf4 through that convert it to pdf
and through f.m SO_NEW_DOCUMENT_ATT_SEND_API1 u can send mail.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = x_document_data
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = it_packing_list
CONTENTS_BIN = it_contents_bin
CONTENTS_TXT = it_contents_txt
RECEIVERS = it_receivers
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8 .
IF SY-SUBRC <> 0.
retcode = sy-subrc.
perform protocol_update.
else .
Similar Messages
-
Hello Experts,
I want to send mail via ABAP program with the following requirements :
1. Recipient is OUTLOOK email -id
2. Sender address has to be an external email-id
3. Send mail as CC and BCC also to other email-id.
Is there any function module which can satisfy all the above requirements.
Regards,
Mansi.hi,
this code will definately help you just go through it:
firstly exported the data to memory using the FM LIST_FROM_MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = t_listobject
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc 0.
MESSAGE e000(su) WITH text-001.
ENDIF.
then i converted it into ASCII using LIST_TO_ASCI,
CALL FUNCTION 'LIST_TO_ASCI'
TABLES
listasci = t_xlstab
listobject = t_listobject
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE e003(yuksdbfzs).
ENDIF.
This gives the data in ASCII format separated by '|' and the header has '-', dashes. If you use this internal table directly without any proccesing in SO_NEW_DOCUMENT_ATT_SEND_API1, then you will not get a good excel sheet attachment. To overcome this limitation, i used cl_abap_char_utilities=>newline and cl_abap_char_utilities=>horizontal_tab to add horizontal and vertical tabs to the internal table, replacing all occurences of '|' with
cl_abap_char_utilities=>horizontal_tab.
Set the doc_type as 'XLS', create the body and header using the packing_list and pass the data to be downloaded to SO_NEW_DOCUMENT_ATT_SEND_API1 as contents_bin.
This will create an excel attachment.
Sample code for formatting the data for the attachment in excel format.
u2022 Format the data for excel file download
LOOP AT t_xlstab INTO wa_xlstab .
DESCRIBE TABLE t_xlstab LINES lw_cnt.
CLEAR lw_sytabix.
lw_sytabix = sy-tabix.
u2022 If not new line then replace '|' by tabs
IF NOT wa_xlstab EQ cl_abap_char_utilities=>newline.
REPLACE ALL OCCURRENCES OF '|' IN wa_xlstab
WITH cl_abap_char_utilities=>horizontal_tab.
MODIFY t_xlstab FROM wa_xlstab .
CLEAR wa_xlstab.
wa_xlstab = cl_abap_char_utilities=>newline.
IF lw_cnt NE 0 .
lw_sytabix = lw_sytabix + 1.
u2022 Insert new line for the excel data
INSERT wa_xlstab INTO t_xlstab INDEX lw_sytabix.
lw_cnt = lw_cnt - 1.
ENDIF.
CLEAR wa_xlstab.
ENDIF.
ENDLOOP.
Sample code for creating attachment and sending mail:
FORM send_mail .
u2022 Define the attachment format
lw_doc_type = 'XLS'.
u2022 Create the document which is to be sent
lwa_doc_chng-obj_name = 'List'.
lwa_doc_chng-obj_descr = w_subject. "Subject
lwa_doc_chng-obj_langu = sy-langu.
u2022 Fill the document data and get size of message
LOOP AT t_message.
lt_objtxt = t_message-line.
APPEND lt_objtxt.
ENDLOOP.
DESCRIBE TABLE lt_objtxt LINES lw_tab_lines.
IF lw_tab_lines GT 0.
READ TABLE lt_objtxt INDEX lw_tab_lines.
lwa_doc_chng-doc_size = ( lw_tab_lines - 1 ) * 255 + STRLEN( lt_objtxt ).
lwa_doc_chng-obj_langu = sy-langu.
lwa_doc_chng-sensitivty = 'F'.
ELSE.
lwa_doc_chng-doc_size = 0.
ENDIF.
u2022 Fill Packing List For the body of e-mail
lt_packing_list-head_start = 1.
lt_packing_list-head_num = 0.
lt_packing_list-body_start = 1.
lt_packing_list-body_num = lw_tab_lines.
lt_packing_list-doc_type = 'RAW'.
APPEND lt_packing_list.
u2022 Create the attachment (the list itself)
DESCRIBE TABLE t_xlstab LINES lw_tab_lines.
u2022 Fill the fields of the packing_list for creating the attachment:
lt_packing_list-transf_bin = 'X'.
lt_packing_list-head_start = 1.
lt_packing_list-head_num = 0.
lt_packing_list-body_start = 1.
lt_packing_list-body_num = lw_tab_lines.
lt_packing_list-doc_type = lw_doc_type.
lt_packing_list-obj_name = 'Attach'.
lt_packing_list-obj_descr = w_docdesc.
lt_packing_list-doc_size = lw_tab_lines * 255.
APPEND lt_packing_list.
u2022 Fill the mail recipient list
lt_reclist-rec_type = 'U'.
LOOP AT t_recipient_list.
lt_reclist-receiver = t_recipient_list-address.
APPEND lt_reclist.
ENDLOOP.
u2022 Finally send E-Mail
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = lwa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
sent_to_all = lw_sent_to_all
TABLES
packing_list = lt_packing_list
object_header = lt_objhead
contents_bin = t_xlstab
contents_txt = lt_objtxt
receivers = lt_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Hope it will help you
regards
Rahul sharma -
Call to Java web service from abap program
HI,
I want to call to Java WS from abap program and i read some post how to do that in release of NW 6.4 but I want to know what is the simplest way to do that in release 7.0 .
Many Thanks,
NinaHi Uwe,
Thank you.
I have WSDL or URL how i can call to them ,in the example that you send i don't find the place that it called.
Do i have to create proxy for that ?
BR
Nina -
Execute webdynpro from abap program and return to the caller program
Guys,
I have a question here.
I know there is a way to call an abap webdynpro application from normal abap program by either using a class method, or use a function module WDY_EXECUTE_IN_PLACE by providing
the webdynpro application or using CALL TRANSACTION statement.
But, is there anyways that we can call the webdynpro application from abap program by supplying data to the webdynpro and display to the user from the portal, and then
once the user do some manipulation on the data, can we transfer back the data to the caller abap program?hey ,
you can pack any web-dynpro program in tranasaction code and run it from R/3 and not via portal :
search in " SAPTECHNICAL" how to do so - for some reason i cant post a link here
than you can use call transaction .
regards
ASA -
Procedure to Call Workflow Object from ABAP program in Se38
Hi All,
I have one scenario like i have to call one Workflow object from ABAP program in SE38.The scenario is like below.....
I have to select some records from database table.For example there are 100 records in the internal table.
For all that records i have to invoke Workflow for getting approval from the authorized persons. Once Approval has come to program, It will post one document in SAP and process ends.
Please suggest me how to move forward with this scenario.
Regards
Manas Ranjan PandaHi,
So you want to start a workflow from an ABAP, if an event exists for that particular workflow then the best way is to use fm SAP_WAPI_CREATE_EVENT,
to start a workflow from an ABAP you can use fm SAP_WAPI_START_WORKFLOW.
Kind regards, Rob Dielemans -
Sending an email to users from abap program
Hi experts ,
How to send an email to users from abap program ...
i need full coding please..so that i can copy and paste it in my program.
Thank you in advance.
Rajasekhar.PHi Venkat
check the below simple code to convert spool to HTML and email it
data: list type table of abaplist with header line.
data: htmllines type table of w3html with header line.
data: maildata like sodocchgi1.
data: mailtxt like solisti1 occurs 10 with header line.
data: mailrec like somlrec90 occurs 0 with header line.
start-of-selection.
Produce a list
do 100 times.
write:/ sy-index, at 30 sy-index, at 50 sy-index.
enddo.
Save the list
call function 'SAVE_LIST'
tables
listobject = list
exceptions
list_index_invalid = 1
others = 2.
Convert the list
call function 'WWW_LIST_TO_HTML'
tables
html = htmllines.
Send mail
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test Subject'.
loop at htmllines.
mailtxt = htmllines.
append mailtxt.
endloop.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
exporting
document_data = maildata
document_type = 'HTM'
put_in_outbox = 'X'
tables
object_header = mailtxt
object_content = mailtxt
receivers = mailrec
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif. -
Send BW query results as HTML email from ABAP program
I have published a code sample for sending BW query results as HTML email from ABAP program. if you have any questions or clarification, please post them here.
the same can be accessed from this link.
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b7658119-0a01-0010-39a9-b600c816f370
Regards
Raja
Message was edited by: Durairaj Athavan RajaOK forget about my earlier post.
do the following changes.
declare the following variables:
data: xtext type standard table of solix .
DATA: atta_sub TYPE sood-objdes .
after the call of FM SCMS_STRING_TO_FTEXT add the following code.
CALL FUNCTION 'SO_SOLITAB_TO_SOLIXTAB'
EXPORTING
ip_solitab = text
IMPORTING
EP_SOLIXTAB = xtext .
and after the following statement
document = cl_document_bcs=>create_document(
i_type = 'HTM'
i_text = text
i_length = conlengths
i_subject = subject ).
add the following code
CALL METHOD document->add_attachment
EXPORTING
i_attachment_type = 'htm'
i_attachment_subject = atta_sub
i_att_content_hex = xtext.
now you will have results both in the body as well as attachment. (this is for test you can remove one of them )
Regards
Raja -
Sending emails from ABAP program
Hi,
I need to send error emails from ABAP program.
I have to pass error internal table as text (not as attachment) in the email.
Can anybody supply any sample code?
Thanks in advance.
Regards,
Arun MohanHI,
See if this code helps:
***Sending mail to the receipients
if not it_final[] is initial.
Populate table with detaisl to be entered into .xls file
PERFORM BUILD_XLS_DATA_TABLE.
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
'Sales Register Report - Set Top Box / Accessories'
'XLS'
'SSTB'
CHANGING GD_ERROR
GD_RECIEVER.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
endif.
*& Form BUILD_XLS_DATA_TABLE
text
--> p1 text
<-- p2 text
FORM BUILD_XLS_DATA_TABLE .
data: wa_itab like it_final.
CONSTANTS:
CON_TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
CON_CRET TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF.
CONCATENATE 'Business Place' 'Region Code' 'Region' 'Branch Code'
'Branch' 'Material Desc' 'Area off Code'
'Area Name' 'Zone code' 'Zone Name' 'Cust No' 'Cust Name'
'Bill Doc No' 'Bill Date' 'Base Val' 'Total Val' 'Quantity'
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_FINAL INTO WA_ITAB.
CONCATENATE WA_ITAB-BUSINESS_PLACE
WA_ITAB-KVGR1
WA_ITAB-REGION
WA_ITAB-VKBUR
WA_ITAB-SALES_OFF
WA_ITAB-ARKTX
WA_ITAB-vkgrp
WA_ITAB-sales_grp
WA_ITAB-bzirk
WA_ITAB-zone
WA_ITAB-kunnr
WA_ITAB-name
WA_ITAB-vbeln
WA_ITAB-fkdat
WA_ITAB-base_value
WA_ITAB-total_value
WA_ITAB-fkimg
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form POPULATE_EMAIL_MESSAGE_BODY
text
--> p1 text
<-- p2 text
FORM POPULATE_EMAIL_MESSAGE_BODY .
REFRESH IT_MESSAGE.
CONCATENATE SY-DATUM6(2) '/' SY-DATUM4(2) '/' SY-DATUM+0(4) INTO G_DATE.
IT_MESSAGE = 'Please find attached excel sheet.'.
APPEND IT_MESSAGE.
IT_MESSAGE = 'Sales Register Report - Set Top Box / Accessories'.
APPEND IT_MESSAGE.
Concatenate 'Report generated date' ':' G_Date '.' into IT_MESSAGE.
APPEND IT_MESSAGE.
clear it_message.
append it_message.
IT_MESSAGE = 'This is an autogenerated mail, please do not reply'.
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
T_PACKING_LIST-OBJ_NAME = 'stb'.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-DOC_TYPE = 'XLS'.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_DESCR = 'Sales_STB'.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-OBJ_NAME = 'stb'.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
LOOP AT IT_RECV.
T_RECEIVERS-RECEIVER = IT_RECV-EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-COPY = 'X'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
ENDLOOP.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM. "SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
text
--> p1 text
<-- p2 text
FORM INITIATE_MAIL_EXECUTE_PROGRAM .
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = ''
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
Regards
Subramanian -
Hi everyone!
Is there a way in ABAP to output XML files? Pls. send code/ function module if any.
From ABAP programs, we are sure that we can output TEXT files, but how about XML files?
The significance of this question is related
Currently we are using XI to interface SAP and AMS, this question for ABAP to produce XML file arose, if for example, the XI server is down and we have to still send data from one system to another. IDocs can also produce XML files, pls confirm. Earlier however, we have preferred XI rather than IDocs to do this. Anyway, any idea regarding this scenario will be greatly appreciated.
Thanks and God bless!
CelesteHi,
Please check this sample codes from other thread.
1. itab --- > xml
xml ---> itab.
2. This program will do both.
(just copy paste in new program)
3.
REPORT abc.
*-------------- DATA
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
a(100) TYPE c,
END OF itab.
DATA: xml_out TYPE string .
DATA : BEGIN OF upl OCCURS 0,
f(255) TYPE c,
END OF upl.
DATA: xmlupl TYPE string .
******************************* FIRST PHASE
******************************* FIRST PHASE
******************************* FIRST PHASE
*------------------ Fetch Data
SELECT * FROM t001 INTO TABLE t001.
*------------------- XML
CALL TRANSFORMATION ('ID')
SOURCE tab = t001[]
RESULT XML xml_out.
CALL FUNCTION 'SCMS_STRING_TO_FTEXT'
EXPORTING
TEXT = xml_out
* IMPORTING
* LENGTH =
TABLES
FTEXT_TAB = itab.
*-------------- Download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filetype = 'BIN'
filename = 'd:xx.xml'
TABLES
data_tab = itab.
******************************* SECOND PHASE
******************************* SECOND PHASE
******************************* SECOND PHASE
BREAK-POINT.
REFRESH t001.
CLEAR t001.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'D:XX.XML'
filetype = 'BIN'
TABLES
data_tab = upl.
LOOP AT upl.
CONCATENATE xmlupl upl-f INTO xmlupl.
ENDLOOP.
*------------------- XML
CALL TRANSFORMATION ('ID')
SOURCE XML xmlupl
RESULT tab = t001[]
BREAK-POINT.
Regards,
Ferry Lianto -
Is it possible to call website from ABAP Program?
Hi Experts,
Is it possible to call website from ABAP Program?
It is very Urgent Help me.
Regards,
Ashok.Hi,
Check the following program:
REPORT ZURL NO STANDARD PAGE HEADING.
DATA: BEGIN OF URL_TABLE OCCURS 10,
L(25),
END OF URL_TABLE.
URL_TABLE-L = 'http://www.lycos.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.hotbot.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.sap.com'.APPEND URL_TABLE.
LOOP AT URL_TABLE.
SKIP. FORMAT INTENSIFIED OFF.
WRITE: / 'Single click on '.
FORMAT HOTSPOT ON.FORMAT INTENSIFIED ON.
WRITE: URL_TABLE. HIDE URL_TABLE.
FORMAT HOTSPOT OFF.FORMAT INTENSIFIED OFF.
WRITE: 'to go to', URL_TABLE.
ENDLOOP.
CLEAR URL_TABLE.
AT LINE-SELECTION.
IF NOT URL_TABLE IS INITIAL.
CALL FUNCTION 'WS_EXECUTE'
EXPORTING
program = 'C:\Program Files\Internet Explorer\IEXPLORE.EXE'
commandline = URL_TABLE
INFORM = ''
EXCEPTIONS
PROG_NOT_FOUND = 1.
IF SY-SUBRC <> 0.
WRITE:/ 'Cannot find program to open Internet'.
ENDIF.
ENDIF.
Regards,
Bhaskar -
Call SXPG _ CALL _ SYSTEM from ABAP program
Hi,
Someone may help me? I need to call the function module SXPG _ CALL _ SYSTEM from ABAP program for to encrypt a file.
I created the command by SM49 , but I don't know how I can call it from ABAP program.
Thanks
Maria CHi Maria.
This is a possible code you can use:
DATA: log LIKE TABLE OF btcxpm WITH HEADER LINE.
Can contain STDOUT, STDERR
commandname =
CALL FUNCTION SXPG_CALL_SYSTEM
IMPORTING
COMMANDNAME = commandname
PARAMETERS = parameters
EXPORTING
STATUS = status
TABLES
EXEC_PROTOCOL = log
EXCEPTIONS
NO_PERMISSION = 1
COMMAND_NOT_FOUND = 2
PARAMETERS_TOO_LONG = 3
SECURITY_RISK = 4
WRONG_CHECK_CALL_INTERFACE = 5
PROGRAM_START_ERROR = 6
PROGRAM_TERMINATION_ERROR = 7
X_ERROR = 8
PARAMETER_EXPECTED = 9
TOO_MANY_PARAMETERS = 10
ILLEGAL_COMMAND = 11
OTHERS = 12.
The following are the comments of the parameters taken from:
http://help.sap.com/saphelp_40b/helpdata/en/fa/0971ee543b11d1898e0000e8322d00/content.htm
Parameters
IMPORTING Parameters
Parameter name
Use
COMMANDNAME
The name of the definition of the external command, as specified in the maintenance function (transaction SM69).
PARAMETERS
Arguments for the external command as specified by the definition in the R/3 System and by the calling program or user.
These arguments are checked for impermissible characters, such as the ; under UNIX. Problems are registered with the SECURITY_RISK exception.
EXPORTING Parameters
Parameter name
Use
STATUS
Returns the final status of the execution of the external command:
· Value O: The external command was started and ran to end successfully.
· Value E: An error occurred; the external command was not run successfully.
Tables Parameters
Parameter name
Use
EXEC_PROTOCOL
Contains the STDOUT and STDERR output of the external command and any output from the target host system.
Exceptions
Exception name
Meaning
X_ERROR
Reserved for future use.
NO_PERMISSION
The AUTHORITY-CHECK of the users authorization for the authorization object S_LOG_COM failed. The user is not authorized to carry out the command named with the specified arguments on the target system.
COMMAND_NOT_FOUND
Command name, as identified by COMMANDNAME and OPERATINGSYSTEM, has not been defined in the maintenance function (transaction SM69).
PARAMETERS_TOO_LONG
The combined argument string (ADDITIONAL_PARAMETERS and the DEFINED_PARAMETERS, as returned in ALL_PARAMETERS) exceeds the limit of 128 characters in length.
SECURITY_RISK
Either:
· The command contains impermissible characters. These are characters with potentially dangerous properties, such as ; under UNIX.
· The command definition specifies that an extra-check function module be run. This function module has rejected execution of the command.
WRONG_CHECK_CALL_
INTERFACE
The command definition specifies that an extra-check function module is to be run. Either this function module is missing, or the interface defined for this function module does not match that of the standard R/3 function module SXPG_DUMMY_COMMAND_CHECK. For more information, please see SXPG_DUMMY_COMMAND_CHECK: Interface for Extra-Check Function Modules.
TOO_MANY_PARAMETERS
The command definition specifies that user-specified arguments for the external command are not allowed. However, an additional string of command arguments was specified.
PARAMETER_EXPECTED
The command definition includes the placeholder character ?, which signifies that additional user-defined arguments are required. However, no additional arguments string was supplied.
PROGRAM_START_ERROR
An error occurred while starting the external command. The R/3 system field SY-MSGV1 contains additional information on the problem.
PROGRAM_TERMINATION_
ERROR
An error occurred while trying to obtain the return code of the external program. The R/3 system field SY-MSGV1 contains additional information on the problem.
ILLEGAL_COMMAND
The external command definition was modified "illegally". That is, the command was not modified by means of the maintenance function (transaction SM69).
The modified command is registered in the system log in its substituted form. The message is registered under the system log ID "LC".
OTHERS
Catch any new exceptions added to this function module.
Hope this will be useful.
Sandro Lombardo -
Call workflow from ABAP program
created a zbusiness object (ZPRODH)with
one key field product hierarchy,
one attribute level number and
one method display.
I tested that zobject and using this object created workflow to display product hierarchy ,it is displaying it. now I have to call it from one abap program.
In the abap program I am calling the funcion module, I
CALL FUNCTION 'SWW_WI_START_SIMPLE'
EXPORTING
TASK = TASK
IMPORTING
WI_ID = WI_ID
TABLES
AGENTS = AGENTS
WI_CONTAINER = WI_CONTAINER.
It is calling the workflow and subrc is 0, but not passing the value to the workflow. Because of that the method is not working, any idea?
Thanks in advancettpa,
Please check this thread:
Re: Workflow from abap program
Also check that your Fm do requires any explicit commit or not?
Hope it will help u
Cheers
Jai -
Garbage in mail body when sending mail from abap code
Hi abapers,
i am sending mail from my program and when the data reaches in mailbox it is as follows.
佐呓义⁇䅄䕔䌉乏啓䕍⁒低䌉乏啓䕍⁒䅎䕍䤉⁃䥔䭃⁔低म䍉吠䍉䕋⁔䕄䍓䤉⁃䥔䭃呅匠䅔啔॓
which is not proper.
I'm attaching the following part of code which i have used.Please let me know if i've made any mistake over here.
DOCDATA-OBJ_LANGU = SY-LANGU.
DOCDATA-OBJ_NAME = 'Mail_Excel_File'.
DOCDATA-OBJ_DESCR = 'Closed Customer Complaints'.
DOCDATA-SENSITIVTY = 'F'.
OBJTXT =
'Attached compensation request is pending for your approval as on '.
APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'today. Please find the attached Field Investigation Report.'.
APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'This is auto generated mail.Please do not reply to this mail.'.
APPEND OBJTXT. CLEAR OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOCDATA-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
DESCRIBE TABLE I_CONTENTS_HEX LINES TAB_LINES.
* OBJPACK-DOC_SIZE = TAB_LINES * 255 + STRLEN( OBJTXT ).
OBJPACK-DOC_SIZE = TAB_LINES * 255 .
OBJPACK-TRANSF_BIN = 'X'.
* OBJPACK-TRANSF_BIN = SPACE.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'XLS'.
* DOCDATA-OBJ_NAME = 'Excel_File_Attachment1'.
* OBJPACK-OBJ_DESCR = FILE_NAME.
OBJPACK-OBJ_DESCR = P_FILE.
APPEND OBJPACK.
RECLIST-RECEIVER = RECIEVER.
RECLIST-REC_TYPE = 'U'.
RECLIST-EXPRESS = 'X'.
APPEND RECLIST.
* FM called for sending the mail to the intended recipients
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOCDATA
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = OBJPACK
CONTENTS_HEX = I_CONTENTS_HEX
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
what will be the problem..
please help out.
Regards,
Navin
Edited by: navin.c on Jul 10, 2009 8:08 AMHi Krishna,
I have attachment properly coming the problem is body of mail its is coming in some unknown language
佐呓义⁇䅄䕔䌉乏啓䕍⁒低䌉乏啓䕍⁒䅎䕍䤉⁃䥔䭃⁔低म䍉吠䍉䕋⁔䕄䍓䤉⁃䥔䭃呅匠䅔啔॓剐䑏䌠䵏⁐低म剐䌠䵏⁐呓呁单䌉䵏⹐删充低म䅌呓䌠䅈䝎䑅䄠॔剐䑏䍕⁔䕄䅔䱉॓䡓䑁⁅䅎䕍匉䅈䕄䌠䑏ॅ䅂䕓丠䵁ॅ䅂䕓䌠䑏ॅ䅂䍔⁈啎䉍剅䴉乁䙕䝃䐠呁ॅ䅓偍䕌䄠䅖䱉䉁䱉呉ख़䉏䕓噒
what may be the problem?
I have used the same logic . im attaching my part of code for your reference .
DOCDATA-OBJ_LANGU = SY-LANGU.
DOCDATA-OBJ_NAME = 'Mail_Excel_File'.
DOCDATA-OBJ_DESCR = 'Closed Customer Complaints'. "nsc070709+
DOCDATA-SENSITIVTY = 'F'.
* Describe the body of the message
*********new additon of mail content
* CONCATENATE 'Dear' L_FIRSTNAME ','
* INTO OBJTXT SEPARATED BY SPACE.
* APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'Attached compensation request is pending for your approval as on '.
APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'today. Please find the attached Field Investigation Report.'.
APPEND OBJTXT. CLEAR OBJTXT.
OBJTXT =
'This is auto generated mail.Please do not reply to this mail.'.
APPEND OBJTXT. CLEAR OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOCDATA-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
* OBJTXT = 'Attached is the FIR PENDING CASES'.
* APPEND OBJTXT.
* DESCRIBE TABLE OBJTXT LINES TAB_LINES.
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
DESCRIBE TABLE I_CONTENTS_HEX LINES TAB_LINES.
* OBJPACK-DOC_SIZE = TAB_LINES * 255 + STRLEN( OBJTXT ).
OBJPACK-DOC_SIZE = TAB_LINES * 255 .
OBJPACK-TRANSF_BIN = 'X'.
* OBJPACK-TRANSF_BIN = SPACE.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'XLS'.
* DOCDATA-OBJ_NAME = 'Excel_File_Attachment1'.
* OBJPACK-OBJ_DESCR = FILE_NAME.
OBJPACK-OBJ_DESCR = P_FILE.
APPEND OBJPACK.
RECLIST-RECEIVER = RECIEVER.
RECLIST-REC_TYPE = 'U'.
RECLIST-EXPRESS = 'X'.
APPEND RECLIST.
* FM called for sending the mail to the intended recipients
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOCDATA
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = OBJPACK
CONTENTS_HEX = I_CONTENTS_HEX
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
COMMIT WORK.
Can anybody help me out on this issue.
Its somewhat on priority.
Edited by: navin.c on Jul 10, 2009 12:58 PM -
Passing data from abap-program to mssql database table thro native sql
Hi,
To pass the data from abap-program to mssql server,i have created database connection through dbco t.code.
now i am trying to get connection thro native sql but am not able to get it .Am working in ECC 5.0.
Could anyone help me on this.Did i miss anything?
i have tried Native-sql like this.
DATA: CON_NAME LIKE DBCON-CON_NAME VALUE 'BIW'.
EXEC SQL.
CONNECT TO :con_name AS 'C1'
ENDEXEC.
Thanks in advance.Hi,
Trying to do the same here, only using Oracle DB.
DATA: dbc TYPE DBCON_NAME VALUE 'BI'
TRY.
EXEC SQL.
CONNECT TO :dbc
ENDEXEC.
IF sy-subrc NE 0.
RAISE EXCEPTION TYPE cx_sy_native_sql_error.
ENDIF.
CATCH cx_sy_native_sql_error INTO oref_native_sql_error.
sql_emsg = oref_native_sql_error->get_text( ).
MESSAGE sql_emsg TYPE 'I'.
ENDTRY.
I keep getting the message 'Native SQL exception has occured' (because of the RAISE statement, I wonder how we can get a meaningfull error description).
Of course this can be a result of a number of network issues, so I'm trying to resolve this together with my BC admin.
I suggest the same to you..
In the meantime, if anyone can help out, it will be appreciated.
Regards,
SD -
SMS from ABAP program to send error message
Hi,
I would like to know what are settings to be done in the system to send an SMS from ABAP program using FM 'SO_DOCUMENT_SEND_API1'.I was trying to send SMS using above FM but the error was "Cannot process message, no route from <userid> to <Mobile.no> ".
Pls let me know the pre requisites to send an SMS using above FM.
Regards,
NivasHi,
I have gone thru this blog but I want send SMS to US Mobile no.I checked other webservice but it supports only few cellular networks in US.
any other alternate for this...
anyway thanks for your reply
Regards,
Nivas
Maybe you are looking for
-
MagSafe light sometimes turns off
Sometimes the light on the connector end of my MagSafe powercord goes out (ie: no green, no orange). However, there doesn't seem to be any lose of power from the cord when this happens: my MBP still says it's charging/is charged while the cord is in.
-
Can a field be change in the "Send Message" area for sending emails
Is it possible to change a field when sending an attachment via the SBO mailer inside of SAP. I have a client that does not want the "Due Date" to be the date the email recipient sees, they would like another date field. See the picture below: Than
-
Access to MWSKZ field in F-59 transaction
Hello, sirs and madams. I've got a problem. There's a necessity to fill in a tax code in transaction F-59 (Payment Request), but the screen-field BSEG-MWSKZ is locked for input. I've tried via OB32 specify that field BSEG-MWSKZ should always be avail
-
How can i show a html message?
Hello,everyone. I don't know how do show a html message. this kind of message is multipart.if it contains some images. How can I do? Must I save these images into server as a file? I am glad to get a hint.
-
Adding valid Application Server Installation Location
I have gotten to this step for adding GlassFish V2 plugin. Next screen: Platform Location - "Box" Then radio buttons: Register Local Default Domain with Domains "Box" Register Local domain Register Remote domain Create Personal domain with Profiles "