I am creating an aperture book from my photos. How do I change the default map provided in the theme to one of my choice e.g. satellite view?
I am creating an aperture book from my photos. How do I change the default map provided in the theme to one of my choice e.g. satellite view?
Kyle,
Thanks for your response. To be clear, the way I am importing the PDF is by going to New in LiveCycle, and selecting Import a PDF document, and selecting Create and Interactive Form with Fixed Pages.
I cannot change the forms or pages, as they are created by our local Board. In otherwords, I have tryed used the flowable content, and upon import, not only are the fonts slightly different, but all the important artwork (trade-related) is gone, and is not in the exact positions it was in. The forms must meet the standards to which they were approved by the regional board, and there are state-mandated forms as well.
What surprises me is that you say this method of Fixed Content isn't used much any more. I would think that a lot of people would have PDF files they would wish to make into fillable, interactive forms without needing to reconstruct the entire document. Perhaps a company that has always done things on paper, and now wishes to use those exact same forms on the computer, with no deviations to looks so they can be printed and match up perfectly.
I thought about using Acrobat's internal form creation system. However, some of these forms have sophisticated options and the calculation scripts and systems within LiveCycle are very useful. Not to mention that it has a much larger scalability, should we chose to utilize it.
Any other suggestions? I am so confused why Adobe would force medium-quality import of a PDF, but be so incredibly flexible about every other option in their program.
Similar Messages
-
I've created a new event from flagged photos how do I move it to all events?
I've created a new event from flagged photos how do I move it to all events?
What do you see at the top of the window when you Control-click and select Show Event? Do you get this window?
Is there any title at the top? This is what I get:
Are you not seeing this? -
What is the best way to create Aperture book from Pages '09 document?
What is the best way to create Aperture book from Pages '09 document?
There is no way to import pages documents to Aperture and convert them to an Aperture book. Aperture books can only be created by manually adding images and text to the pages of a book, and using the layout of the predefined templates.
The best you could do, would be to print your pages document to pdf and import the resulting pdf file into Aperture as a new project. This will create one image for each page. Then select the page images all at once and create a new book. Select a theme with fullsize page images, like "picture Book", and then add the images of the pages to the empty pages of the book.
But probably would you get a much better quality and layout, when you recreate your pages document in Aperture, by starting with an empty book and copying and pasting the text from your Pages document. But don't paste the photos from the document - try to use the originals of those photos. -
I created two Aperture libraries from one large library. Some of the photos in library
I created two Aperture libraries from one large library. Some of the photos I want to keep in library #2 are in the trash of library #1. If I empty the trash of library #1, will it affect the same photos that were moved to library #2? I moved over 2,000 photos to create library #2. Their names are showing in the trash of library #1.
Are your images referenced or managed? If your partial libraries are referencing the same original files as the library you exported them from, be careful. Deleting the orignal on one library #1can delete it from the library #2. But if your originals are managed by Aperture inside the Aperture library, you can delete them.
I moved over 2,000 photos to create library #2. Their names are showing in the trash of library #1.
If you are not sure about referenced or managed, select one of the images you want to keep in the library where they are not in the Trash, then use the command "File > Show in Finder". If you can reveal them in the Finder, they are referenced and probably are shared between your libraries.
Or turn on "badge referenced files" in the Preferences > Appearance settings. Then your referenced images will show arrow badges. -
Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
What we found from out testing:
- The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
- The file can be closed and Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
- Also, until the Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file.
Example Scenario:
- User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
- Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
- User 1 saves his file and closes it - but Dreamweaver is still open.
- User 2 also saves his file and leaves Dreamweaver open.
- The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
- If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
- Same for User 2, he will open 'his' version with 2300 lines in.
Other information:
- Files are opened directly from the server
- Sometimes the users will save incrementally and re-open
- Most of the time users will save incrementally and keep the files open
- The users will never not save incrementally and just save when closing the file once finished
- The users are usually working on the files all day
- It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
Anyone know if this is a known issue?
Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
ThanksYour server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium -
when i am creating an iphoto book my pictures looks blurry, is it going to be like that on the real book or is just the software?
What resolution are the photos? What size are the photo frames are you placing them in? Are you getting the yellow low resolution warning triangle on them?
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN -
I have many contacts in address book from a certain company that just changed its name. Is there a way to globally change all the contacts to the new company name all at once?
Rando510 wrote:
Although clunky as you say, this sounds like a reasonably efficient way to accomplish what I was seeking.
Address Book has no global find/replace. Bob Grove suggested one possible workaround; however, a grep-capable text editor (eg, TextWrangler) is better than TextEdit if complex strings are involved.
An alternative is Bento (which is designed specifically to interact with the AB database), but it's not free. -
While downloading a book from iTunes, my internet service was interrupted and i didn't get the entire book. Now when i try to download it, i get the message that i already have downloaded it. It hit the download button in the purchased section, and nada! How can i re-download the book?
Hi Peggs,
Try this:
Open your iBooks app on your iPad
Select the Store Button at the top
Select Purchased at the bottom
You will see your AppleID on the right at the bottom, then Redeem, then Support
Click on your Apple ID, and when the AppleID window comes up with the options, Sign Out
Then Sign In again and try redownloading your book
Hope this helps!
Cheers,
GB -
I bought a book from itunes with my ipad. after syncing my ipad and iphone the book did not transfer to my iphone. Any suggestions? I might add that I an technically handicaped
If the book isn't on your computer's iTunes then you should be able to copy it from the iPad by connecting the iPad to your computer and in iTunes doing File > Transfer Purchases and you can then sync it to the iPhone (connect the iPhone to your computer, select it on the left-hand side of iTunes, and use the Books tab on the right-hand side to select and sync that book). Or you can re-download it directly on the iPhone : http://support.apple.com/kb/HT2519
Another option, if you always want ibooks to download on both devices, is to turn 'automatic downloads' for books 'on' on both : http://support.apple.com/kb/HT453 -
HT201272 If I purchases then deleted a book from my iphone, how do I get it back?
I I purchased, then deleted a book from my iphone, how do I get it back? When I click on Purchased, it tells me I have no downloads
If it's an ibook and it's still in the store then you should be able to re-download it via the Purchased tab in the ibookstore in the iBooks app. If it's an audiobook then they are currently a one-time only download - if you haven't got a copy of it on your computer or on a backup for re-syncing then if it's still in the store you can try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
Problem ordering book from I photo
When I went to process my order I got a pop up window saying "default text has been found that has not been edited-printed books will not include this text. Question: How can I find out where it is detecting this problem? I have reviewed all the text several times and can't figure out where it is seeing this.
Welcome to the Apple Discussions. You'll have to go through the book, page by page, looking for any text fields that do not have any entry. When you find them either put in text or just a space. That will get rid of the message.
Even if you go ahead and order the book, those text boxes will appear empty, i.e. the default text that is in them will not be printed.
Be sure to check the cover, front and back flaps, etc., as well as each page layout. Also before ordering preview the book as described in this Apple document to make sure all text is visible and there are no other errors (spelling comes to mind first for my books). -
I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
How to change the default save encoding of the dvm files when create dvm???
When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository.
After I updated the encoding from ‘UTF-8’ to ‘GB2312’ in the three files below, and restarted the SOA service, the DVM in Chinese appeared on ESB control.
But when I adding the second row in Chinese and save it, then restart the SOA service, the DVM in Chinese disappeared from ESB Control once again. Because the encoding in the three files below is updated from ‘GB2312’ to ‘UTF-8’ .
Files:
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm\Chinese.xml.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\content\files\dvm\Chinese.xml_1.0
How to change the default save encoding of the dvm files when create dvm in ESB control ???I have the same problem. When I updated to Mavericks now the bookmarks bar font is huge. I liked it the way it was before. I liked the smaller font. Also wish I could change the color of the sidebar and font/folders too.
I tried to see in preferences if there was anyway to change it, but I don't see anything there. -
When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to?
It's not necessary to change the Command N keystroke..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall. -
How do I change my default email on the "Me" contact from a Facebook email to my normal email address in the same contact? Or at least change it for the autofill information?
Perfernece for contact to change. Do I just have to dis-associate my contact fromt the facebook account? Is only the autofill changable?If you allow Facebook to access your contacts and you have the @facebook.com email alias turned on, it will add the @facebook.com email to your contact info, and because it has the fixed label of "email" it overrides every other email address.
They didn't fix this in iOS 8.
There are two ways to remove the @facebook.com email from your contact info:
If you don't need your Facebook friends and their info updating your contacts, go into iOS Settings -> Facebook and turn off access to Contacts.
If you don't use your @facebook.com email address (all it does it forward to the primary email address) you can go into the Facebook app, More -> Settings -> General -> Email -> and uncheck "Use your Facebook email". Removing it from Account Emails does not work, you have to turn it off. Once you do this, go to iOS Settings -> Facebook and turn Contacts off and on again to make it update your info. The @facebook.com address should be removed.
Maybe you are looking for
-
How to populate fields in standard SAP Screen
Hi, There is one client requirement in <i>Create: Customer</i> transaction. (<b>T Code: XD01</b>) Go to transaction XD01. You get pop-up screen (Customer Create initial screen). Enter the details required like account group, company code, etc. Now y
-
Is there an ASCIi replacment for this? I googled for it but I cant seem to find anything consistent or specifically stating its supported in CF. An alternate solution is acceptable, but using the letter x seems a little cheesy.
-
Can anyone send a pic in an sms?
I have tried, but it seems that you can only e-mail a pic. Am I missing something?
-
Newly updated Adobe will not open!
I am running Windows XP professional 2002. I have just updated to Adobe 9.3. It now will not open and goes immediately to "Adobe 9.3 has encountered a problem and needs to close." Details say Error Signature AppName: acrord32exe
-
Can anybody help me