I am getting a "printing error" message on my Pixma M432 and a lightening icon at the right

I am getting a "printing error" message on my Pixma M432 and the lightening shaped icon in the triangle beneath the stop button is flashing. My documents won't print and are backed up onscreen on my computer. I have turned it off and on. What is wrong?

solution?

Similar Messages

I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

OK, I tried a few things, and I do not understand the results.
1) I opened the document in Preview, and it would only recognize the three initial pages which I typed using the Pages App. It did not recognize the bulk of the text which I copied from Appleworks 6. It also did not recognize any of the scans.
2) I tried opening a pdf in Preview, and it would only recognize the scans. (No Text!)
3) I tried copying everything (select all, and command-c) in Pages, and then opened a blank Pages doc, and typed Command-v. This got me all of the text, but none of the scans!
4) I was worried that my Pages app might be corrupted, but I successfully converted a similar 78-page document with copied materials from Appleworks 6 and similar scans, ant this worked perfectly.
My conclusion is that my file must be corrupted. Is there any way to check this? shabda88

Acrobat Pro 8: When I print to pdf I get windows print error message

This just started happening when I installed my acrobat professional 8.0 on my new computer (with Windows XP Pro). Everything works fine, but when I print a document to .pdf, I get that windows printer pop-up message that says that it was unable to print. As a consequence, I get a bunch of allegedly unprinted documents in my printer queue that I have to keep deleting. This is more an annoyance than anything else, but can anyone tell me how to stop this from happening??
THanks.

OK, I'm still not sure I'm getting this, but I printed to file, and then opened the prn file in Acrobat Distiller. The actual pdf file was not in the folder, but I could open it with distiller.
The message below distiller said: tart Time: Tuesday, January 20, 2009 at 13:03:04
Source: retainerpetitionreview.prn
Destination: C:\Documents and Settings\Mark Markus\Desktop\retainerpetitionreview.pdf
Adobe PDF Settings: C:\Documents and Settings\All Users\Application Data\Adobe\Adobe PDF\Settings\Standard.joboptions
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
%%[Page: 3]%%
%%[LastPage]%%
Distill Time: 00 Hour(s) : 00 Minute(s) : 00.265 Second(s)
**** End of Job ****
However, when I just print "regularly" (not, "to file") the pdf file is saved and generated, but I get that popup error message, which stays in my printer queue, saying that there was an error printing to LPT 1

I got an error message when updating my phone and now its stuck with the apple on the screen it wont turn off HELP!

my i phone 4 is stuck with the apple logo on the front screen. i tried turning off but its frozen. this happened when i was doing the most current up date and an error message popped up. please help.
Laci

1. Try forcing reboot by holding down the home button and power/sleep button at the same time until the screen restarts.
-- IF THAT FAILS --
Let the phone battery drain.

How can I print emails? Printing Error message that no printers are installed. (Printers are installed.)

When I click File > Print, I get a Printing Error message that no printers are installed. Printers are installed. When I click Yes to install a new printer, I receive a new error message that "Windows can't open Add Printer / The local print spooler service is not running. Please restart the spooler or restart the machine." I updated to the new version of Thunderbird 24.6.0. Using Windows 8. I restarted the machine. I confirmed printers are installed using Control Panel. I do not see any way to restart a print spooler. How can I fix this? Thanks.

The print spooler is a windows service and is required to print. I would hazard a guess you can not print with any application.
What I am saying is I think your windows instalation has a problem, not Thunderbird.

I keep getting time out error messages when trying to install flash player

I've put a new install of Win 7 64 bit pro onto a new hdd. All other s/w has worked fine and not given me any issues except for adobe flash player. If I just install FP 11 it installs ok. Issue happens when I try to install the "other" version for Steam. The install screen stops at 11%, shoots up to 47%, then I get a timeout error message. If I uninstall and install the Steam version 1st it works then the regular version gets the same timeout error. I have folllowed all advice from previous threads on this topic such as disabling firewall (I use Panda), a clean adobe install using the flash player uninstall program and removing reader as well then going through the registry and removing all mention of adobe, etc, etc.
I found a partial way around this. I installed the Steam version of flash player, then found a website that I could download flash player 10 executable from. I was able to run that and get both versions of flash player going on my system. Then the flash player went and found the update to version 11. I've just tried to install that and I end up with the exact same error messages all over again.
Is there website that I can download the executable file for flash player 11 from or a link to it on the adobe website?

I am not sure what you mean by "Flash Player for steam"; the only Flash Player installers I know is the ActiveX (for Internet Explorer) and the plugin (for other browsers); you can find both at http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header
[topic moved to Flash Player forum]

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages sometimes. How do I fix?

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs. I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device. I have been writing down all the devices and the IPs they have been using. It happens more with PCs than Macs, ipads or iPhones.

If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
On your Mac, open AirPort Utility
Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue.

TS2446 I've reset my Apple ID password twice and still get a "disabled" error message....???

I've reset my Apple ID password twice and still get a "disabled" error message on my IPad, Iphone, and ITunes. I have also gone into the "settings" on both the ipad and iphone and reset the passwords to no avail.

This is not an iPhoto issue. Contact Apple support
LN

Getting print error messages after 8.1.3 update

Adobe Acrobat 8 - Since the 8.1.3 update a couple days ago, I am now getting print error messages in the Adobe PDF printer status box when I send any document to the Adobe PDF printer. The actual printing of the document in Adobe works correctly, but these error messages occur as well - even though the document printed just fine.
I am running Windows Vista Ultimate and did not have the issue prior to the 8.1.3 update.

I have removed PDFMaker from Office, to try to simplify the troubleshooting. All attempts to print end up the same, whether from PDFMaker (before I removed it from Office), from print to Adobe PDF from within an Office app, or using Create a PDF in AP 8.1.3 from an Office file ... the last hourglass comes up in "reading Adobe PDF" and stays up. I can see the "target file" created in WinExpl but greyed out, and the hourglass (busy) never goes away in AP 8.1.3.
In contrast, if I want to create a pdf from a "save as" text file, AP 8.1.3 creates the pdf instantly. Create a pdf from scanner also works fine. This problem is definitely related to updates, since AP 8.1 worked perfectly the last time I used it from Office, which was perhaps 2 months ago.
AP 8.1 suddenly stopped working this week with a "can't create PDF" error message, I updated AP all the way to 8.1.3, and have the problem described above. I don't get an error message now, the create PDF or print to PDF simply never completes.
BTW, both my desktop and notebook run Vista Ultimate 64-bit, both have registered and activated copies of AP 8.1.3, and Office 2007, and both have the exact same problem.
I uninstalled AP 8.1.3 on the desktop, installed the trial version of AP 9.0, and experienced the exact same problem as with AP 8.1.3, the create pdf never completes, but produces no error message.
I print to XPS as a workaround since print to Adobe PDF never completes.

How to print error messages in browser?

When I visit a jsp file in browser, there's some errors in the jsp file, so the browser returns
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
I want the detail error messages, so I can debug my problem. How to print error message in browser or find the message in some log file?

Hi Kanaraja,
Thanks for your answer. I need to get certain information from the list. So, I use LIST_To_ASCII FM. However, may I know the ascii_tab should be type to what? And after this FM, do I have to use another FM to display the ascii list?
data ABAPLIST type ABAPLIST OCCURS 0.
SUBMIT RPCALCU0 VIA SELECTION-SCREEN
with PNPXABKR = 'US'
with PNPTIMRA = 'X'
with PNPPABRP = '10'
with PNPPABRJ = '2003'
with PNPPERNR-LOW = '100750'
with PNPPERNR-LOW = '109202'
with PNPPERNR-LOW = '100255'
with PNPABKRS-LOW = 'US'
with SCHEMA = 'ZUSP'
with RADI_EDT ='X'
with EDT_VARI = 'CUS&SAP_US'
with TST_ON = 'X'
EXPORTING LIST TO MEMORY and RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject       = ABAPLIST
EXCEPTIONS
   NOT_FOUND        = 1
   OTHERS           = 2.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
    list_index         = -1
TABLES
    listasci           = asci_tab
    listobject         = ABAPLIST
EXCEPTIONS
    empty_list         = 1
    list_index_invalid = 2
    OTHERS             = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.

HP LaserJet CP1025nw Color getting a Mispick error message

I have a HP LaserJet CP1025nw Color printer, running on WIN 7 64-bit and I am getting a Mispick error message after almost every page that prints. I have had this printer for the past 1-1/2 years and it has worked fine. I replaced the black toner over a month ago with no issues. The Attention light blinks and has to be rest after each print job. I can print a test page then it errors, I clear it and then it will re-print the test page again. I have cleaned the rollers, check for any loose paper pieces, changed the paper (type and size) nad have powered off & unplugged the power to the printer several times. It will come up with no errors and then once I send something to print, it will print it and then immediately after the page is printed the Attention light will start to blink. I have even gone as far as unintsalling the printer and reinstalling all the drivers and software, to no avail.
Any help would be greatly appreciated.
Thank you,
Jarm1964

This is probably a little late but it may help someone with the same issue in the future. I had the exact same scenario - HP LJ CP1025nw color on Win7-64 and it suddenly started receiving the mispick error after every print job. There was nothing stuck, no paper jam, no problem picking up paper, etc. It turns out it was a setting on the printer - under Printer Properties (from Devices and Printers), on the Configure tab I had checked Allow Manual Duplexing and Jam Recovery set to On. When I unchecked Allow Manual Duplex and turned Jam Recovery to Off, the mispick error went away. Not sure which of the 2 was the culprit.

My HP LaserJet 100 color MFP M175nw is getting a 52 error message

My HP LaserJet 100 color MFP M175nw is getting a 52 error message, how i can fix it ?

Hi @pipou716 ,
I'd like to help you resolve the 52 error message today.
Does the error also have the word scanner in it?
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Update the printer's firmware. Software & Drivers.
Restart the printer after the firmware is updated.
How is the printer connected? (USB/Ethernet/Wireless)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

2110 printer ERROR message - remove and check cartriges

I replaced black cartrige twice and still message - the color cartrige i did not replace however I'm only printing in black and have done this before with no problem- why cant i get this message to go away or am i missing somthing

Hi @rem123,
Thank you for visiting the HP Support Forums! I understand after years of non use, you put new cartridges in your HP PSC 750 and now you are getting a cartridge error message.
I would like you to start troubleshooting here: 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M...
Because there are many variations of these 'Problem with Printhead,' 'Printer Failure,' or 'Ink System Failure' error messages and alphanumeric codes, we have provided a few guided steps to get you to the right troubleshooting document for your error. Select the statement that best describes your situation.
If you are still getting the error message after all the troubleshooting has been done, please contact our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Photoshop not printing: error message

I am having serious trouble, I would label it an impossibility, printing in Photoshop CS6 (and Photoshop CC, I tried both) When I select print, I get an instant error message:
"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."
I am running Mac OSX10.9.3. I have done a de-install and re-install. I have also re-installed the printer drivers. I have no difficulty printing through InDesign or any other programs. No matter what printer I try (I have three to use) Photoshop will not print.
Mysteriously, I had no trouble printing this time yesterday, and have not changed my hardware or external software since. The problem is with Photoshop. Thank you (anyone!) for your help.

So no one has solved this?
I have the same problem, so my slow work around is this: Save as PDF and print from either Preview or Adobe Reader which both work fine (suggesting that Photoshop might be the issue).
NB, the fault occurs on both CC and CC 2014.
Can't seem to find any info on the fix or work-around so any help would be appreciated.
thanks
Jonno

Using the Export to PDF online service, I get "Conversion Failure" error message; why?

Using the Export to PDF online service, I get "Conversion Failure" error message; why?
The documen t was originally created with Word (*.doc) then printed to PDF format; now I need to convert back to Work, but I get the "Conversion Failure" error message, both on conversion back to *.Doc format and attempt to convert to *.docx format.

Hi lfordlaw,
How large is the PDF that you're trying to convert? How did you generate the PDF from Word (did you use Acrobat, or Word's built-in PDF generator)? What version of Word are you using?
The answers to those questions should help us get to the bottom of things.
In the meantime, please try the following:
Clear the browser cache and log back in to https://cloud.acrobat.com.
Try a different web browser (see System Requirements | Adobe Acrobat Pro and Online Services for a list of supported browsers).
Try to convert a different file (if you can convert another file without error, the one you're receiving the error on may be damaged).
I look forward to hearing back from you.
Best,
Sara

I am getting a "printing error" message on my Pixma M432 and a lightening icon at the right

Similar Messages

Maybe you are looking for