I have connected my time capsule to motorola SG6580 modem via ethernet.  I have a wireless network on the motorola and a wireless network from the time capsule.  I get duplicate IPs error messages sometimes. How do I fix?

I have connected my time capsule to motorola SG6580 modem via ethernet.  I have a wireless network on the motorola and a wireless network from the time capsule.  I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs.  I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device.  I have been writing down all the devices and the IPs they have been using.  It happens more with PCs than Macs, ipads or iPhones.

If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
On your Mac, open AirPort Utility
Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue.

Similar Messages

  • I installed OSx 10.8.2 and now when I try to connect to itunes store I get an "unexpected error" message. How can I fix this?

    I cannot update apps or download anything new from store. Keep getting a message saying "unexpected error occurred."  Only new thing I have done is update to 10.8.2 on my computer.

    In addtion, I just found out that my iMac is no longer conecting to iCloud either.  I never had any problems until I updated to 10.8.2 last night.  Any suggestions?

  • Can not connect to iTunes Store with iPad get an error message. How do I fix?

    I cannot connect to iTunes Store. Get an error message. How do I fix it?

    I have the same problem. In fact when I plug in my iPad 2 updated to ios 7.0.4 I get that same message and it crashes my entire system - forcing me to reboot.

  • When I try to burn a CD I get "medium write error" message. How to fix this?

    When I try to burn a CD I get "medium write error" message. How to fix this?

    Hi ramseyer,
    If you have difficulties burning CDs in iTunes on a Mac you will want to follow the steps outlined in this article to troubleshoot -
    iTunes 11 for Mac: If you have trouble burning a disc
    http://support.apple.com/kb/PH12149
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • When I try sharing to my apple devices from my final cut pro x, I keep getting a "Quicktime Error:-50". How can I fix this?, When I try sharing to my apple devices from my final cut pro x, I keep getting a "Quicktime Error:-50". How can I fix this?

    When I try sharing to my apple devices from my final cut pro x, I keep getting a "Quicktime Error:-50". How can I fix this?

    You can search the entire internet by putting that error message into google, see what other discussions appear.
    With only the little information you've provided, I'd trash Compressor and download it again from the App Store.
    You could share the timeline out to MPEG2 and then import that into iDVD, if you have it, or Toast.
    Given an hour or three, someone with better suggestions will soon chime in.

  • HT4623 I have a new i4 phone and am new to Apple. My imessaging will not send out any messages. How can I fix this

    I have a new i4 phone and am new to Apple. My imessaging will not send out any messages. How can I fix this? HELP

    about message http://support.apple.com/kb/HT3529
    troubleshooting message http://support.apple.com/kb/ts2755
    settings - message - imessage - is turned ON?  Do you have it activated?
    Make sure you have a good wifi or cellular data connection.
    Also you can only imessage other apple products who have imessage on.

  • I have 2 iphones and a macbook on one mobile me account.  How can I keep mail in the macbook and one iphone private from the other iphone?

    I have an iPhone 3G, an iPhone 3GS, and a MacBook on one macmail and mobile me account.  How can I keep mail on the MacBook and iPhone 3 private from the iPhone 3GS?

    Pretty much. I don't understand why you need to worry about MobileMe, though. I'd guess the vast majority of us with iDevices don't have MobileMe accounts at all. That's pretty much why it failed.

  • Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

    Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
    thank you

    Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
    Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
    It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
    How will the script determine where the author's name begins and where it ends?
    How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
    How will the script recognize the year of publication?
    For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
    Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
    Best of luck.
    Regards,
    Barry

  • I have upgraded to a new computer.   I have installed iTunes from the internet and copied my music from the old hard drive to my new one.  What do I need to do to get my new computer to recognize my old playlist?

    I have upgraded to a new computer.   I have installed iTunes from the internet and copied my music from the old hard drive to my new one.  What do I need to do to get my new computer to recognize my old playlist?

    See https://support.mozilla.com/en-US/kb/Backing%20up%20and%20restoring%20bookmarks
    and
    https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information?s=new+computer&r=4&as=s#os=win&browser=fx8

  • Please help me on itunes i can't sync my music i keep getting a error message [-69] how do i fix

    please help me on itunes i can't sync my music i keep getting a error message [-69] how do i fix

    Hi kidjojo,
    Welcome to Apple Support Communities.
    You may find some helpful suggestions in this article:
    iTunes displays a -69 error when syncing iPod
    http://support.apple.com/kb/HT1210
    Best,
    Jeremy

  • When i try to purchase an app i get an 'unknown error' message.  How can I get this corrected.  i can't purchase anything or update any of my apps

    get an unknown error message when i try to make purchases with my apple ID.  How can I fix this?

    Try resetting your iPad and see if that fixes this situation for you.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT5654 I am getting a Runtime Error R6034. How do I fix this?

    I am getting a runtime error message R6034.
    Microsoft visual states that it conflicts with loading C runtime library.
    Was advisaed to check with application's support team?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (100012)

  • After the most recent update for my Wndows 7 computer, every time I load a page I get a Java script error message. How can I fix this?

    The pop-up window states Error: Syntax error. This happens on almost every page that I load. It's also happening on my windows xp laptop... and it seems that it has something to do with the most recent Microsoft updates that just went through.

    hello Kakkirox, this error message is likely caused by your social fixer addon. please go to http://socialfixer.com/blog/category/releasenotes/ and update it to the newest version - this should fix the issue...

  • The backup disk image "/Volumes/Data/Neil-MacBook Pro (171).sparsebundle" is already in use. error message. How do I fix? Ideas

    "The backup disk image “/Volumes/Data/Neil-MacBook Pro (171).sparsebundle” is already in use"
    OS X 10.8.1 (12B19)
    " error message just started
    Mountain Lion
    OS X 10.8.1 (12B19)
    MacBookPro 2.53 Corei5
    All software update installed
    Time Capsule : 1TB, 599 of 998GB used
    What causes it?
    How do you fix it?
    How do you stop it happening again?
    Any ideas please

    Thanks for fast response.
    I already tried C12, no luck. I did read C17, but that did not help either.
    I agree that Apple should really spend a bit more time on ensuring this common problem is resolved more quickly
    But where to do you sent this request to?  Doesn't seem easy to find a person to send it to.
    I dumped by corporate wIn-pc environment that I was forced to use for the past ...forever.  Have been delighted with the Mac experience..... for 24 months..but these type of un-resolved matters with terse error messages reminds me of the bad old days.
    I had the problem 2 weeks ago and solved it by "clicking about" after reading the forum  Can't remember what i did though. V. V. V. frustrating when the Mac is a business tool.  I don't want to be a mechanic, I want to be a driver.
    Thanks again for your help

  • Application was unable to start correctly (0xc0000022) error message. How do I fix?

    Firefox was running fine one day and the next I got this error message. I have uninstalled and reinstalled several times but still getting this error message. I have run virus scan but nothing was found. How can I fix this problem?

    See also:
    *http://www.sevenforums.com/news/343281-what-went-wrong-microsoft-s-august-updates.html

Maybe you are looking for

  • Project file not opening in my system

    I have installed a new LabVIEW 8.2 and all the drivers resourses also, i am not able to open th project file, sometimes the NIMax is not opening and keeps me installing again and again but not working properly.even after formating the system i am not

  • Can't make Windows work and can't remove it

    I've given up trying to fix Windows and so figure to remove it altogether. But Bootcamp Assist is of no use. All I get when I try to continue (after choosing whether or not to check for updates) is: The Startup disk cannot be partitoned or restored t

  • Not getting error or warning massage for duplicate MIRO Credit memo

    Hi experts i have checked standard massage "M8 108  Check if invoice already entered under accounting doc. no."M8108 (if accounting documents are found).i have enter the message M8108 in table T100S using transaction SM30 and then set it as an error

  • Urgent: DVtapes recorded in DVCAM format 50i, 32k audio) - capture settings required?

    Hi guys. I hope you can help. I have several DV TAPES (wedding footage. long story and the videographer is not assisting me  i am editing my own video) I need to digitise this. I have tried a few settings in adobe premiere, but i'm not sure if the qu

  • Facing issue with EntityManager

    Hi Friends, I have a Person entity and Address entity and there is @OneToMany relation b/w Person and address. See below mapping =================== @Entity @Table(name="Person") public class Person {      @Id      @GeneratedValue      @Column(name =