I am getting quicktime error 50 when I attempt to export a retimed project in fcpx to youtube. I mix and match retime rates. I usaully have no issues. The entire project is retimed.

I am getting quicktime error 50 message when I try to share a project to youtube. I use retime frequently, mixing and matching rates with no issues. I am having trouble with this project. The entire project is retimed ( which  I have done before), it is four minutes and change in length. I used different rates, holds as well, and
secondary storylines ( retimed to match the primary clip rate ). Any suggestions would be helpfull, thank you.

I figured it out:
FCPX does not support NTFS drives, even with Paragon NTFS working perfectly for everything else on the system.
I guess Apple (just) assumes that nobody will, or should, be using any other filesystem than Mac with FCPX.
I wasted hours looking for a solution, when a better error message besides a misleading "cannot allocate memory" could have been something more useful.
Not impressed.

Similar Messages

  • How do I fix a corrupted admin account? I get an error when I attempt to log in.

    There was a shut down due to a power failure. When the mac started again, it did not show my Home folder, which is on an external drive. The desktop was not correct and everything looks sort of generic, rather than reflecting my preferences.
    I use the Advanced Options in the user accounts to reset my home folder, although it seemed to show the correct location for it. When I changed it, the locations was shown as externaldisc1 rather than externaldisk, which I thought was the correct name (not the real names). I used disk utility to check name of the external disk and it should the volume as externadisk1, so I went ahead and made the change.
    Now I cannot login. I get an message that says Cannot log in at this time because an error occurred.
    I have two drives that I can use as a startup. The internal drive is running 10.9. This is the one that has the problem. I can still login if I startup from the external drive, which is running 10.8, as can be seen below, and is the disk on which the Home Folder is located.

    Well, if it were me, I'd try a couple of other things first:
    - Force a reset of the admin password
    As before, boot into Recovery HD
    From the menu, choose Utilities, Terminal
    Type "resetpassword" (without the quotes) and hit enter
    Select the Macintosh HD volume
    Select your account from the list and give it a new password, click Save
    Restart normally and test
    - Reset your Home directory permissions
    Do steps 1-5 above, choosing yet another password
    Also click "Reset"
    Restart normally and test
    I Believe in trying things that to from the least potential harm to the greatest   if these don't work, please reply back.
    My next choice would be to do a restore from time machine from a point before you had this trouble (you do have backups?) and, in the absence of advice from more experienced community members, you could try the linked article, bearing in mind that a full erase and reinstall might be needed.

  • I am getting JavaScript Errors when I attempt to use the Multiscreen Preview function in DW CS 5.

    When I attepmpt to use the Multiscreen Preview button in DW CS 5 I get the following error:
    "While executing onShow in MultiscreenPreview.htm, the following JavaScript error(s) occured:
    In file "Multiscreen Preview":
    onShow is not defined"
    This leads to either an unusable multiscreen preview box or another series of similar JavaScript errors.
    Is there a solution to this problem and if so what is it?
    Thank you for your time.

    Follow this KB article:
    http://kb2.adobe.com/cps/405/kb405604.html
    Start with 12 & 4 and then go through the rest if needed.

  • I'm getting this error when I attempt to launch xCode 4.2.1. Any idea what's wrong?

    UNCAUGHT EXCEPTION (NSInternalInconsistencyException): Couldn't load plug-in 'com.apple.dt.IDE.IDEiPhoneSupport' while firing fault for extension 'Xcode.Device.iPhonePlaceholder'
    UserInfo: {
        NSUnderlyingError = "Error Domain=DVTPlugInErrorDomain Code=2 \"Loading a plug-in failed.\" UserInfo=0x400d6b960 {DVTPlugInIdentifierErrorKey=com.apple.dt.IDE.IDEiPhoneSupport, DVTPlugInExecutablePathErrorKey=/Developer/Platforms/iPhoneOS.platform/Develope r/Library/Xcode/PrivatePlugIns/IDEiPhoneSupport.ideplugin/Contents/MacOS/IDEiPho neSupport, NSLocalizedRecoverySuggestion=The plug-in or one of its prerequisite plug-ins may be missing or damaged and may need to be reinstalled., NSLocalizedDescription=Loading a plug-in failed., NSFilePath=/Developer/Platforms/iPhoneOS.platform/Developer/Library/Xcode/Priva tePlugIns/IDEiPhoneSupport.ideplugin, NSLocalizedFailureReason=The plug-in \U201ccom.apple.dt.IDE.IDEiPhoneSupport\U201d at path \U201c/Developer/Platforms/iPhoneOS.platform/Developer/Library/Xcode/PrivatePlu gIns/IDEiPhoneSupport.ideplugin\U201d could not be loaded.  The plug-in or one of its prerequisite plug-ins may be missing or damaged., NSUnderlyingError=0x400341220 \"The bundle \U201cIDEiPhoneSupport\U201d couldn\U2019t be loaded because it is damaged or missing necessary resources.\"}";
    Hints: None
    Backtrace:
      0  0x00007fff8349af3a __exceptionPreprocess (in CoreFoundation)
      1  0x00007fff82ddcd5e objc_exception_throw (in libobjc.A.dylib)
      2  0x00000001026004e0 -[DVTExtension _fireExtensionFault] (in DVTFoundation)
      3  0x00000001025ea786 __38-[DVTDispatchLock performLockedBlock:]_block_invoke_0 (in DVTFoundation)
      4  0x00007fff8b376c79 _dispatch_barrier_sync_f_invoke (in libdispatch.dylib)
      5  0x00000001025ea72f -[DVTDispatchLock performLockedBlock:] (in DVTFoundation)
      6  0x000000010260027b -[DVTExtension _valueForKey:inParameterData:usingSchema:] (in DVTFoundation)
      7  0x00000001026001bf -[DVTExtension valueForKey:] (in DVTFoundation)
      8  0x00000001025ff997 +[DVTDevice _knownDeviceLocators] (in DVTFoundation)
      9  0x00000001025ff4f0 -[DVTDeviceManager startLocating] (in DVTFoundation)
    10  0x0000000102b56cfc IDEInitialize (in IDEFoundation)
    11  0x0000000102ed3c18 -[IDEApplicationController applicationWillFinishLaunching:] (in IDEKit)
    12  0x00007fff8b424d0e __-[NSNotificationCenter addObserver:selector:name:object:]_block_invoke_1 (in Foundation)
    13  0x00007fff834437ba _CFXNotificationPost (in CoreFoundation)
    14  0x00007fff8b410fc3 -[NSNotificationCenter postNotificationName:object:userInfo:] (in Foundation)
    15  0x00000001035be366 -[NSApplication finishLaunching] (in AppKit)
    16  0x00000001035bdf18 -[NSApplication run] (in AppKit)
    17  0x000000010383a244 NSApplicationMain (in AppKit)
    18  0x00000001025dfeec (in Xcode)

    Well, I'm trying to figure out how you're doing this from a recovery disk. The only way to reinstall Mountain Lion is through the Recovery HD in the computer. Hold Cmd/R as you are starting up the computer and keep holding it. Eventually you'll get a screen asking you to select the language. Hit continue to select english and you'll get a Mac OS X Utilities Menu with the second option down being reinstall OS X.

  • I keep getting this error when I try to export as pdf or try to print to pdf. Does anyone know how to fix it?

    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[ Error: typecheck; OffendingCommand: showpage ]%%
    %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%
    %%[ Warning: PostScript error. No PDF file produced. ] %%

    I'm having this issue as well. I have tried directly exporting and packaging the file and keep getting error messages. When I initially open InDesign the document has a distiller message error. I'm not sure what that means but I'm sure it's contributing to the problem. After trying Peter's work around it acted like it was exporting but at the last minute failed to. Other ideas/solutions welcome.
    Thanks-

  • I get an error when I try to export all files?

    Here is a picture of the error I get:
    http://screensnapr.com/v/R76ciV.png
    This is very frustrating, any help will be appreciated. Thanks! 

    It should reset the Photoshop preferences
    CS5 - Error 22:Window does not have a constructor
    http://forums.adobe.com/thread/622755
    How to delete/reset Photoshop preferences
    http://forums.adobe.com/thread/375776

  • I keep getting this error when doing a bcp export, why?

    SQLState = S0002, NativeError = 208
    Error = [Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid object name 'SGMH_Reports.dbo.sp_RadLog'.
    SQLState = 37000, NativeError = 8180
    Error = [Microsoft][SQL Server Native Client 10.0][SQL Server]Statement(s) could not be prepared.
    NULL
    QUERY:
    set @FileName =Convert(varchar(2),DatePart(MM,@EndDate))+'_'+
                  Convert(varchar(2),DatePart(DD,@EndDate))+'_'+
                  Convert(varchar(4),DatePart(YYYY,@EndDate))
    Set @FileLoc = '\\sangorbandc02\data\FTPResend\RADADT\'
    --Set @FileLoc = '\\it-dba\C$\TestFiles\'
    Set @Command = 'bcp "Select * from SGMH_Reports.dbo.sp_RadLog" queryout "'+
                    RTrim(LTrim(@FileLoc))+'\ADT_'+@FileName+'.txt" -T -c -t^|'
    print @Command
    YFLORES

    is this a valid object SGMH_Reports.dbo.sp_RadLog? Can you query this table?
    Select * from SGMH_Reports.dbo.sp_RadLog
    If So, can you mention -S <ServerName> in the bcp command ?
    Set @Command = 'bcp "Select * from SGMH_Reports.dbo.sp_RadLog" queryout "'+
                    RTrim(LTrim(@FileLoc))+'\ADT_'+@FileName+'.txt" -S <ServerName> -T -c -t^|'
    -Prashanth

  • Get "version error" when try to register 7940 phone

    When I try to register a cisco 7940 iphone I get the "version error" - from research it said to double check to make sure you have the right model phone. I do have the correct phone type specified but still gets this error          
    When an attempt is made to register a new phone, the Cisco IP phone screen displays version error, and the phone gets stuck in this stage.
    This issue occurs when the wrong phone type is chosen on the Device > Phone configuration on the CallManager Administration page. Choose the correct phone type to resolve the issue.
    Anyone else running into this issue ? Any advise ? I tried 3 different 7940 phones and get the same "version error". I tried using a template when adding the phone as well as creating manualy the new phone but still same "version error"

    Hi Johan
    Try to delete and Re-add the phone back to CUCM and they try to register the phone.
    Regards
    Aditya Gupta

  • Get "network error" when try to view Disney channels on Apple TV

    I get "network error" when try to view Disney channels on Apple TV. Tried restarting Apple tv and restarting my airport.

    Thank you for your feedback

  • I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

    I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
    The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

    I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
    The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

  • HT1926 I am getting an R6034 error when I attempt to download the latest version of iTunes. What does this mean?

    I am getting an R6034 error when I attempt to download the latest version of iTunes. What does this mean?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99885)

  • In attempt to burn blu-ray, I get QuickTime error 0.  Takes hours to export a 7 minute movie from timeline, then get notice it fails.  What's going on here?

    New problem just started 24 hours ago.  When I try to export from the time line to create a QuickTime file, a 7 minute movie on time line takes 3 hours to export and then the export fails, where as a few days ago, that export would take about 10 minutes at most.  I get the same failure notice when I try to share to blu-ray, DVD, or Vimeo.  Tried to use compressor, no such luck as compressor failed to make a .mov file.  I get QuickTime error 0 message about 5 minutes into trying to share to Blu-Ray now.   Does anyone know what is going on here?  I'm running latest update of Snow Leopard on an intel Mac Pro and the latest update to Final Cut Pro X.  I've also installed QT 7.6.6 to use in creating time lapse movie files.

    Same problem here, too. Final Cut Pro X 10.0.3 on OS 10.6.8. However, it is only doing it on ONE of my projects. A 4-second test project burned successfully.
    I'm  actually going to use iDVD to burn copies for a few people, so I only need the movie file from FCPX.
    Would someone please post best export settings for use on a DVD? In FCPX, the project is  in HD (1080p) with all media optimized to ProRes 442. I know it will have to be down-sampled to DVD resolution, but I've always been curious to know what settings will result produce the best possible quality in DVD resolution.
    Thank you!
    Bart

  • I am not able to purchase apps, I'm not getting any error alerts. I just get no response when I attempt to purchase. Also when I attempt to use a search engine to find a itunes app I just get redirected.

    I am not able to purchase itune apps. I do not receive a error message.
    I do not get a response when I attempt to purchase.
    When I use a search engine to find a app and it is to be
    Found at the itunes site I get redirected.

    Have you tried resetting and restarting >  iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    Or restoring >  iTunes: Restoring iOS software

  • I get an error when attempting to start genius. It says "Unsuccessful Action: The action you attempted to perform did not complete successfully. Please try again later." Help!

    I get an error when attempting to start genius. It says "Unsuccessful Action: The action you attempted to perform did not complete successfully. Please try again later." Help!

    From an existing Discussion:
    Go to Safari --> Preferences
    Click Security
    Show Cookies
    Type "apple.com" in to top search field
    Select All
    Click Remove
    Click Done
    Repeat the above to confirm they are gone (mine took two attempts)
    Choose Update Genius again in iTunes.
    iTunes 9 - can't update genius https://discussions.apple.com/thread/2151150

  • HT204380 I keep getting an error when attempting to log in to FaceTime on my Mac. "The server encoutered an error processing registration. Please try again later."

    I keep getting an error when attempting to log in to FaceTime on my Mac. "The server encoutered an error processing registration. Please try again later."

    Hey radyslav,
    There's an article that applies to your situation, I'd follow the steps within here:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Take care,
    Delgadoh

Maybe you are looking for

  • Sata Errors on start-up.

    Hello, when I boot my laptop it gives me a repeating error after the Grub screen. [164266.343653] ata1.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x6 frozen [164266.343662] ata1.00: failed command: WRITE FPDMA QUEUED [164266.343671] ata1.00: cm

  • Frame 7 question - arrow keys / mouse scroll wheel don't work

    I have FrameMaker version 7.0p579. I've not used FrameMaker for quite a while, but I know my arrow keys used to move graphic elements, but they don't now.  Perhaps it's because I now use USB mouse and keyboard? One other question -- was the upgrade f

  • Set Exchange Related Properties task gets rejected

    Hi All, During exchange account creation one of task 'Set Exchange Related Properties' is getting rejected with error ' incorrect information provided'. I have tried checking all the attributes in process forms but finding all proper. Create mailbox

  • Jpa query with parameters in Greek

    Hello I use netbeans 6.9.1 and toplinlk essensials for jpa connected to a mysql database mysql database constants: character_set_database = utf8 character_set_server = utf8 character_set_system = utf8 I have this code Query qItemom = emOpsw.createQue

  • TS3988 not an iCloud account what should I do?

    I try to install iCould on my Computer and downloaded the program as shown on the webas soon I try to enter the icould it asks for a user name and password, not a big deal if I would know how to get one. I tells me that the Apple ID is valid but it i