I am having a problem configuring Audition to allow me to monitor audio with a bluetooth headphone.

I have several bluetooth headsets and I normally have no problem pairing and connecting them to various computers, but I attempted to pair a headset with my laptop running Audition last evening. The transport froze with the play button changed to green. I could not get it to play. When I replaced the bluetooth device with a pair of wired headphones, I was able to get everything to work as normal, other than the fact that I was tethered to my machine.
Is there a proper way to specify to Audition that I would like to route the monitor audio through a bluetooth device?
While the Audition output was failing, I was still able to hear system alerts and various other sounds through the bluetooth device, just not the Audition output, which is what I was working on.
I see some chatter on the forums, but not a lot of solutions for this sort of thing.
By the way, I was using a MacBook Pro from 2012 with 16G with OS X.8.5.

Hi there,
Did you try clearing your cookies? Perhaps one of them got corrupted in a previous attempt to login.
Regards,
Ziggy

Similar Messages

Problems monitoring audio with a m-audio Firewire 410 card

So I have a M-Audio 410 hooked up through the firewire port on my G5, But it geeks out (audio turns to loud noise, strange defects, spinning ball of slowness appears) everytime I try to monitor audio out of final cut, also when I play LARGE quicktime files!!! The card works fine for all other applications I have on my mac, Cubase, iTunes etc... Anyone else have heard of this, or know what to try. I have most of my video on an external drive, a LACIE media drive, which is my only option as I am working with large amounts of video.
I am thinking this is an issue with the bandwith of firewire on the computer. Maybe too much information between the audio card, and accessing the drive through the other firewire port. Any thoughts?
Cosmos

Hello, I was just about to post the following when I saw your recent post, Wondering if you ever found a solution for what you're running into? (BTW, I went to UO a looooong time ago. Go Ducks!)
We'd like enhance the audio end of our edit suite and are thinking of adding an "FireWire 410" from m-audio for I/O. And ProTools.
But we've read here and there in forums that there may be a problem with Firewire I/O (and maybe the m-audio "FireWire 410" in particular?) and confusion with decks like the DSR-11, etc. Disturbs the video on an external broadcast monitor.
One note: we don't think we'd necessarily be sending audio from the DSR-11 to the "FireWire 410" (and on to headphones and speakers) via firewire.
Anyone out there using FCP and the "FireWire 410" who could comment?
Thanks,
Brad

Problem with video audio sync using Bluetooth headphones

I have recently bought a pair of beats studio wireless headphones but when using my ipad there are sync issues with video and audio. Many apps have the problem but sky go seems to be the worst followed by YouTube. Apple video is not too bad but not perfect.

Hello Jamie,
Thank you for the details of the issue you are experiencing with your new Bluetooth headphones. It can certainly get frustrating if the audio gets out of sync when using the headphones.
I recommend reviewing the sections titled "Resolution" and "Bluetooth disconnects, intermittent connectivity, or unable to find" in the following article for steps to troubleshoot the issue you described:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Thank you for using Apple Support Communities.
Best,
Sheila M.

I am having a problem connecting my MacBook Pro (running 10.6.8) to a bluetooth music streaming devise (Arcam r-blink)

Good evening all,
When i am trying to connent my MBP to an Arcam R-blink (a rather expensive music streaming receiver) i am getting a 'Bluetooth audio failed'.
The device is turned on and they are paired. I just appears they don't like talking to each other.
Eventually after several fustrating attempts they will finally connect - mainly after i have unpaired then repaired.
Anyone else had this problem? Can it be fixed?
Thanks,

Here are a couple of User Tip Articles that may help you:
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
On a personal note, I would seriously consider reinstalling Snow Leopard 10.6. It still is the most stable and efficient Mac OS.
Ciao.

How do you change your name of your phone? I am having the horrible problem that my phoone doesn't work with my Bluetooth and it was recommended that aI change the name, among others things (that still don't work!)

How do you change the name of your phone? I am having that horrible problem of my phone suddenly not working (no audio) with my Bluetooth (apparently due to the most recent update) and nothing has worked thus far to try to restore it....some one recommended I change the name of my phone and then try to sync it with my car...

Thank you...this was a suggestion from a blog regarding the Bluetooth problem that has resulted from the most recent upgrade---lost the audio capabilities suddenly in my car as have other people and there is nothing that Apple has had me do that has restored it! I am not a very happy camper regarding this dilemma! thank you for your help though!

Anyone else having a Problem with Leopard and Photoshop CS3?

I'm using CS3 with Leopard 10.5.4 at work and there are some very aggravating anomalies, that I'd like to nail down to a cause. Most frequently, when switching from apps to P'Shop, the menu bar stays for the previous app, i.e. when going from Finder to P'shop, the menu bar still says Finder and has Finder options. Changing from Lightwave to P'Shop, the menu bar remains Lightwave.
Occasionally, an Adobe app - P'Shop or InDesign - will simply disappear and not come back. The icon in the dock shows it as active, but no amount of clicking, Command-Tabbing will reveal the app and I have to Force Quit, losing unsaved changes.
I have a feeling it's Leopard, since, I've used CS3 on Tiger and CS4 on Tiger and never had a problem.
I'm wondering if upgrading to the latest Leopard would make much of a difference.
Has anyone come across this and found any kind of answers?
Thanks for any suggestions.
-Vincent

> Just because it doesn't happen to Phil (who may not use all of the same features of the Suite that others do anyway) does NOT mean that these problems are not real and are not mere PEBCAK.
Right. If someone is having a problem associated with Tiger, it's PEBAK. If Leopard is involved, it's automatically because of Leopard. Apparently, with Apple's latest OS, trouble shooting problems are no longer necessary - just blame it on Leopard and call it a day.
b FUD
I find the dynamics here really interesting. This thread would have been very different if Vincent had posted with problems involving Tiger. Would have gone something like this:
After admonishing him for not providing more information about his setup by posting the obnoxious big blue link on how to ask questions (ahem - we know NOTHING about his machine or configuration, such as which machine, how much RAM, scratch disk or attached peripherals), there'd be all kinds of trouble shooting advice given - "try a new user", "repair permissions", "run DiskWarrior, and on and on ...
But no, since he mentions Leopard, none of that is apparently necessary and the completely, utterly
b irresponsible
advice is given ... "that's just the way Leopard is".
Those are some serious problems he's reporting that have nothing to do with Leopard. Something is obviously hosed!
As for discounting my experience because I don't use every app in the suite as extensively as I do Photoshop, I'm FAR more qualified to discuss Leopard and CS issues than Ann or Neil who do not use Leopard at all (and have never used it as far as I know.)
"Others have problems with it", is their battle cry but it's extremely weak. Do I really need to remind you all that these forum are ALWAYS filled with people who have problems, regardless of version or OS? You act as if this forum was a ghost town when Tiger and CS3 were current!
Gee, Ann ... people are STILL reporting problems with 10.5 and CS3? How shocking! Guess what - people are STILL reporting problems with 10.4 and CS3 too! Let me make a prediction - people will have problems with 10.8 and CS9!
Vincent-
> I don't really deal with fonts anyway ...
Yes. You do. Even if you never type a single line of text, every application uses fonts to create menus and other GUI items. If one of those fonts are bad, it can create all kinds of problems, including the very problems you mention.
The fact that you don't seem aware of this and you're still using 10.5.4 leads me to believe you're not familiar with the basic practices of maintaining a healthy system. Again, how did you install Leopard on that machine?
Look, if you're simply trying to justify using CS4, go right ahead. It's a worthwhile upgrade in it's own right. However, if you install it on that machine in it's current state, CS4 will NOT fix your problems because you do NOT have a healthy system.
You asked for experiences with Leopard - I can launch every application in both CS3 and CS4 suites
i simultaneously,
and STILL not have your issues. I haven't experienced anything like your CS3 problems in Leopard - on both a 2006 Mac Pro and a 2008 Macbook.
If you'd like help to try and figure out the real problem, I'm more than happy to help. If not, Adobe will gladly take your money ...
-phil

I've been having a problem forwarding ports in my router...

I've been having a problem forwarding ports in my router WRT160N I enable the ports I want to use for my applications, just after clicking save settings I go back to my port's forwarding section and I don't see any application I add being saved. Please help, thanks.
Message Edited by AudioSoft on 04-09-2008 05:31 PM

Might be possible that it will take time to save the settings ... so once you click save settings wait for few seconds ...
Also if it not working ... disable all firewall on the computer & then try to configure the router ...

Error: "We're having a problem opening this location on file explorer. Add this website to your trusted sites list and try again"

Hello,
When i try to open document library from SharePoint Production portal then it throws the specified error. However, when i open document library from SharePoint Development portal then it opens it in file explorer quite easily.
Production portal is on https whereas development portal is on http. Also, UAG has been configured on production portal.
Any idea where it's getting stuck up? Surely, this is not a browser issue on Windows 7 as it's opening the development portal's document library on the same machine.
I've also done following things:
- Configured Desktop Experience on production environment
- Installed the hotfix for Windows 7
Regards,
Sohaib
Sohaib Khan

Hello Sohaib.
Here is the list of causes defined here.Hope it helps you
The cause and the resolution methods are the following:
Cause: There is a missing Root site collection...
Resolution: Check and ensure, that the “Managed Paths” are not changed in the web Application’s page, there is a (root) explicit for
this web application and there is a working Root site collection.
If for any reason this is not the case in your environment, you may try the following:
- Apply (if not already) the following Hotfix to one of those clients:
Error when you open a SharePoint Document Library in Windows Explorer or map a network drive to the library after you install Internet Explorer 10 in Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/2846960
Then, try to delete the cache of the IE browser before reproducing the issue. Check the result..
- Try to temporarily disable the Antivirus and test again.
- Check if you have installed the Desktop Experience feature on the SPS13 server.
- Check if you face this behavior with all users, Or only with some specific ones, Or with all different client OSes..
Otherwise you will need to collect the logs to further analyze...
http://blogs.msdn.com/b/george_bethanis/archive/2013/11/04/sps13-quot-open-with-explorer-quot-random-error-quot-we-re-having-a-problem-opening-this-location-in-file-explorer-add-this-web-site-to-your-trusted-sites-list-and-try-again-quot.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

Problems configuring HP Laserjet M1213nf MFP with Mac via AirPrint

Hello,
I have a HP Laserjet M1213nf MFP printer, connected to a Dlink DSL-2730U ADSL router. I am having problems configuring the printer with my Macbook running OSX Yosemite. I can see the printers name in nearby printers but when I try to add the printer, the mac gives me an error saying, "unable to communicate with the printer at this time". The network settings on the printer are configure for iPv4 and iPv6 addresses.
Previously, I had the ADSL DSL-2750U model router, and the printer was connected fine. I did not face any issues then. I have been facing problems since I changed my router so the problem should be in the router. I have the IP for the printer reserved in the DHCP reservation list on the router settings using the mac address of the printer.
Can someone please help me out here? Is there something I am probably missing.
Rgds
~n~

I talked to the DLink Support. They asked me to disable an option called "MultiAP Isolation" and Voila, the printer is working fine. I can add it to all my devices on the wireless network. I looked up google. Apparently, this isolation feature present in some routers, prevent wifi clients to interact with other devices connected to the wired network and also with each other. Thats why only my desktop which was also connected wired was only able to access the printer and not the laptops connected wirelessly.
Problem solved. Thanks for all your help on this one.
Cheers!

I'm Having a problem with a program called ''Stealth''.

It attempts to start up but fails every time due to my recent update on my MacBook. Before I got the new update the program could start up at any time and ask me for my password. I only have 10 seconds to type the password in. Even if I type it in and press enter, nothing happens. After 10 seconds the whole screen goes white with a text on it saying:
If you're not the owner of this computer please return it to:
The reward for this computer is:
It was something like that and it was red and did definetly not look like something Apple made. It looks more like someone wrote it on OpenOffice or something.
After a while the green camera light goes on and indicates that the camera is recording. It's really creeping me out.
HELP WOULD BE APPRECIATED

Thank you!
still having some problems:
I have used MIDI Monitor to figure out midi notes coming from my edrums:
Snare 16
Kick 11
High Tom 24
Mid Tom 21
Low Tom 17
Open HH 18
Closed HH 22
Crash 25
Ride 27
Then I made a map in MidiPipe
(like in this link http://www.macosxaudio.com/forums/viewtopic.php?f=1&t=31170 )
Midi In - hijack usb
Key mappers for all pads (for example for a snare: Key In 12, Key Out 16)
Midi Out - uncheck velocity & pass through
when I'm using Addictive Drums everything still be the same even with MidiPipe, am I configured it correctly?
here is the link on Addictive Drums keymap http://dl.dropbox.com/u/12842366/Addictive%20Drums%20Keymap.pdf

Problems configuring Platform Domain with MS Sql Server

Hi,
We are having problems configuring a Platform Domain with MS Sql Server 2000.
We are using Weblogic version 7.0.0.2. These are the steps we followed
1.We manually created a database called TestDB and created a user account called
"system", pwd ==>> "weblogic" in SQL server and assigned him as the DB owner for
the TestDB created.
2. Changed dbsettings_properties files (Commented pointbase entries and uncommented
SQL Server entries. I gave the connection parameter as connection=jdbc:weblogic:mssqlserver4:localhost:1433
in this file.
3. Modified Config.xml and changed properties for DataSyncPool, WLIPool, CommercePool,WLIPool
and modified the RDBMS realm properties to point to the database.
4. ran the create_db script and it seemed to have run fine looking at the log
file.
5. I then tried to start the BEA Server instance and I get the following error.
I am also attaching the config.xml file for reference.
Appreciate any help/suggestions. Thanks in Advance.
Vikram
<Apr 9, 2003 2:57:45 AM EDT> <Error> <RDBMSRealm> <000000> <An error occured cre
ating a database connection for the realm.
java.sql.SQLException: Invalid port: weblogic:mssqlserver4:localhost:1433
at weblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:
193)
at weblogic.jdbc.mssqlserver4.ConnectDriver.parse(ConnectDriver.java:333
at weblogic.jdbc.mssqlserver4.ConnectDriver.connect(ConnectDriver.java:1
02)
at com.bea.p13n.security.realm.RDBMSDelegate.<init>(RDBMSDelegate.java:1
69)
at com.bea.p13n.security.realm.RDBMSDelegate$DFactory.getInstance(RDBMSD
elegate.java:962)
at com.bea.p13n.security.realm.internal.Pool.<init>(Pool.java:53)
at com.bea.p13n.security.realm.RDBMSRealm.createPool(RDBMSRealm.java:153
at com.bea.p13n.security.realm.RDBMSRealm.<init>(RDBMSRealm.java:140)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:232)
at weblogic.security.acl.Realm.getRealm(Realm.java:87)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
<Apr 9, 2003 2:57:45 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
in
itialize the server: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
[config.xml]

Try removing the server section from the SchemaProperties line.
Preferrably do not use localhost or hostnames in the server
configuration file.
<RDBMSRealm
Name="wlcsRealm"
DatabaseDriver="weblogic.jdbc.mssqlserver4.Driver"
DatabasePassword="weblogic"
DatabaseURL="jdbc:weblogic:mssqlserver4:yourIPAddress:1433"
RealmClassName="com.bea.p13n.security.realm.RDBMSRealm"
SchemaProperties="user=system;password=weblogic"/>
Also consider ...
If you have a new Portal database created in SQL Server?
Does the user system have the Portal database as his default database?
-- Jim
Vikram wrote:
Hi,
We are having problems configuring a Platform Domain with MS Sql Server 2000.
We are using Weblogic version 7.0.0.2. These are the steps we followed
1.We manually created a database called TestDB and created a user account called
"system", pwd ==>> "weblogic" in SQL server and assigned him as the DB owner for
the TestDB created.
2. Changed dbsettings_properties files (Commented pointbase entries and uncommented
SQL Server entries. I gave the connection parameter as connection=jdbc:weblogic:mssqlserver4:localhost:1433
in this file.
3. Modified Config.xml and changed properties for DataSyncPool, WLIPool, CommercePool,WLIPool
and modified the RDBMS realm properties to point to the database.
4. ran the create_db script and it seemed to have run fine looking at the log
file.
5. I then tried to start the BEA Server instance and I get the following error.
I am also attaching the config.xml file for reference.
Appreciate any help/suggestions. Thanks in Advance.
Vikram
<Apr 9, 2003 2:57:45 AM EDT> <Error> <RDBMSRealm> <000000> <An error occured cre
ating a database connection for the realm.
java.sql.SQLException: Invalid port: weblogic:mssqlserver4:localhost:1433
at weblogic.jdbc.mssqlserver4.ConnectionInfo.<init>(ConnectionInfo.java:
193)
at weblogic.jdbc.mssqlserver4.ConnectDriver.parse(ConnectDriver.java:333
at weblogic.jdbc.mssqlserver4.ConnectDriver.connect(ConnectDriver.java:1
02)
at com.bea.p13n.security.realm.RDBMSDelegate.<init>(RDBMSDelegate.java:1
69)
at com.bea.p13n.security.realm.RDBMSDelegate$DFactory.getInstance(RDBMSD
elegate.java:962)
at com.bea.p13n.security.realm.internal.Pool.<init>(Pool.java:53)
at com.bea.p13n.security.realm.RDBMSRealm.createPool(RDBMSRealm.java:153
at com.bea.p13n.security.realm.RDBMSRealm.<init>(RDBMSRealm.java:140)
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:232)
at weblogic.security.acl.Realm.getRealm(Realm.java:87)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<Apr 9, 2003 2:57:45 AM EDT> <Emergency> <WebLogicServer> <000342> <Unable to
in
itialize the server: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
Reason: Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
DBMSException: An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
on: An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:94)
at weblogic.security.acl.Realm.getRealm(Realm.java:65)
at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
a:353)
at weblogic.security.providers.realmadapter.AuthorizationProviderImpl.in
itialize(AuthorizationProviderImpl.java:72)
at weblogic.security.service.SecurityServiceManager.createSecurityProvid
er(SecurityServiceManager.java:1875)
at weblogic.security.service.AuthorizationManager.initialize(Authorizati
onManager.java:206)
at weblogic.security.service.AuthorizationManager.<init>(AuthorizationMa
nager.java:127)
at weblogic.security.service.SecurityServiceManager.doATZ(SecurityServic
eManager.java:1613)
at weblogic.security.service.SecurityServiceManager.initializeRealm(Secu
rityServiceManager.java:1426)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecuritySe
rviceManager.java:1365)
at weblogic.security.service.SecurityServiceManager.initializeRealms(Sec
urityServiceManager.java:1487)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1207)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
at weblogic.Server.main(Server.java:32)
<Domain Name="epmsDomain">
<Log
FileName="logs/wl-domain.log"
Name="epmsDomain"
/>

<Server
Name="platformServer"
     ListenAddress="localhost"
ListenPort="7501"
NativeIOEnabled="true"
TransactionLogFilePrefix="logs/"
>
<SSL
Name="platformServer"
ListenPort="7502"
Enabled="true"
ServerCertificateChainFileName="ca.pem"
ServerCertificateFileName="democert.pem"
ServerKeyFileName="demokey.pem"
/>
<Log
FileName="logs/weblogic.log"
/>
<WebServer
DefaultWebApp="splashPage"
LogFileName="./logs/access.log"
LoggingEnabled="true"
Name="platformServer"
/>
</Server>

<JDBCConnectionPool
Name="commercePool"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="weblogic"
InitialCapacity="20"
MaxCapacity="20"
CapacityIncrement="1"
RefreshMinutes="0"
ShrinkingEnabled="false"
Targets="platformServer"
TestConnectionsOnReserve="false"
TestTableName="WEBLOGIC_IS_ALIVE"
/>

<JDBCConnectionPool
CapacityIncrement="2"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
InitialCapacity="8"
LoginDelaySeconds="1"
MaxCapacity="36"
Name="wliPool"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="weblogic"
RefreshMinutes="0"
ShrinkPeriodMinutes="15"
ShrinkingEnabled="true"
Targets="platformServer"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="false"
JNDIName="weblogic.jdbc.jts.commercePool"
Name="commercePool"
PoolName="commercePool"
Targets="platformServer"
/>
<JDBCDataSource
JNDIName="weblogic.jdbc.pool.commercePool"
Name="commercePool"
PoolName="commercePool"
Targets="platformServer"
/>
<JDBCDataSource
JNDIName="WLAI_DataSource"
Name="WLAI_DataSource"
PoolName="wliPool"
Targets="platformServer"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="com.bea.wlpi.TXDataSource"
Name="TXDataSource"
PoolName="wliPool"
Targets="platformServer"
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="WLCHub.DS"
Name="WLCHub.DS"
PoolName="wliPool"
Targets="platformServer"/>
/>

<JDBCTxDataSource
     EnableTwoPhaseCommit="true"
JNDIName="cgDataSource"
Name="cgDataSource"
PoolName="commercePool"
Targets="platformServer"/>
<JDBCTxDataSource
EnableTwoPhaseCommit="true"
JNDIName="cgSampleDataSource"
Name="cgSampleDataSource"
PoolName="commercePool"
Targets="platformServer"/>
<JMSConnectionFactory JNDIName="weblogic.jws.jms.QueueConnectionFactory"
Name="cgQueue" Targets="platformServer"/>
<JMSJDBCStore ConnectionPool="commercePool" Name="cgJDBCStore" PrefixName="WEBLOGIC"/>
<JMSServer Name="cgJMSServer" Store="cgJDBCStore" Targets="platformServer">
<JMSQueue JNDIName="jws.queue" Name="cgJWSQueue" StoreEnabled="default"/>
</JMSServer>
<JTA Name="epmsDomain" TimeoutSeconds="3600"/>


<JDBCConnectionPool
Name="dataSyncPool"
DriverName="weblogic.jdbc.mssqlserver4.Driver"
URL="jdbc:weblogic:mssqlserver4:localhost:1433"
Properties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Password="WEBLOGIC"
InitialCapacity="1"
MaxCapacity="5"
CapacityIncrement="1"
RefreshMinutes="0"
ShrinkingEnabled="false"
TestConnectionsOnReserve="false"
TestTableName="WEBLOGIC_IS_ALIVE"
Targets="platformServer"/>
/>
<JDBCTxDataSource
EnableTwoPhaseCommit="false"
JNDIName="weblogic.jdbc.jts.dataSyncPool"
Name="dataSyncPool"
PoolName="dataSyncPool"
Targets="platformServer"/>
/>

<Security
GuestDisabled="false"
Name="epmsDomain"
PasswordPolicy="wl_default_password_policy"
Realm="wl_default_realm"
CompatibilityMode="true"
/>
<PasswordPolicy
Name="wl_default_password_policy"
/>
<Realm
Name="wl_default_realm"
CachingRealm="wlcsCachingRealm"
FileRealm="wl_default_file_realm"
/>
<CachingRealm
BasicRealm="wlcsRealm"
CacheCaseSensitive="true"
Name="wlcsCachingRealm"
/>
<RDBMSRealm DatabaseDriver="weblogic.jdbc.mssqlserver4.Driver"
DatabasePassword="weblogic"
DatabaseURL="jdbc:weblogic:mssqlserver4:localhost:1433"
SchemaProperties="user=system;password=weblogic;server=jdbc:weblogic:mssqlserver4:localhost:1433"
Name="wlcsRealm"
RealmClassName="com.bea.p13n.security.realm.RDBMSRealm"/>
<FileRealm
Name="wl_default_file_realm"
/>
<StartupClass
ClassName="com.beasys.commerce.ebusiness.security.KeyBootstrap"
FailureIsFatal="false"
Name="KeyBootstrap"
Targets="platformServer"
/>

<JMSConnectionFactory Name="WLI_B2B_TopicFactory"
JNDIName="com.bea.wli.b2b.server.TopicConnectionFactory"
AllowCloseInOnMessage="true"
UserTransactionsEnabled="true"
Targets="platformServer"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wli.b2b.rosettanet.QueueConnectionFactory"
Name="RNQueueFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="false"
DefaultDeliveryMode="Persistent"
DefaultPriority="4"
DefaultTimeToLive="0"
JNDIName="com.bea.wlai.JMSConnectionFactory"
MessagesMaximum="10"
Name="WLAI_JMSConnectionFactory"
OverrunPolicy="KeepOld"
UserTransactionsEnabled="true"
Targets="platformServer"/>
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wlpi.TopicConnectionFactory"
Name="wlpiFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSConnectionFactory
AllowCloseInOnMessage="true"
JNDIName="com.bea.wlpi.QueueConnectionFactory"
Name="wlpiQueueFactory"
Targets="platformServer"
UserTransactionsEnabled="true"
/>
<JMSJDBCStore
ConnectionPool="wliPool"
Name="JMSWLIStore"
PrefixName="PBPUBLIC"
/>
<JMSServer Name="WLIJMSServer"
Targets="platformServer"
TemporaryTemplate="TemporaryTemplate"
Store="JMSWLIStore">
<JMSTemplate Name="TemporaryTemplate"/>

<JMSQueue Name="WLI_B2B_RNEncoderQueue"
JNDIName="com.bea.wli.b2b.rosettanet.EncoderQueue"/>
<JMSTopic Name="WLI_B2B_Topic"
JNDIName="com.bea.wli.b2b.server.B2BTopic"/>
<JMSQueue Name="WLI_B2B_OutboundQueue"
JNDIName="com.bea.b2b.OutboundQueue"/>

<JMSTopic Name="wlpiEvent"
JNDIName="com.bea.wlpi.EventTopic"/>
<JMSQueue Name="WLI_BPM_Timer"
JNDIName="com.bea.wli.bpm.TimerQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSQueue Name="WLI_BPM_Event"
JNDIName="com.bea.wli.bpm.EventQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSQueue Name="WLI_BPM_ValidatingEvent"
JNDIName="com.bea.wli.bpm.ValidatingEventQueue"
StoreEnabled="true"
Template="WLI_JMSTemplate"/>
<JMSTopic Name="WLI_BPM_Error"
JNDIName="com.bea.wli.bpm.ErrorTopic"/>
<JMSTopic Name="WLI_BPM_Audit"
JNDIName="com.bea.wli.bpm.AuditTopic"/>
<JMSTopic Name="WLI_BPM_Notify"
JNDIName="com.bea.wli.bpm.NotifyTopic"/>

<JMSQueue Name="WLAI_ASYNC_REQUEST_QUEUE"
JNDIName="com.bea.wlai.ASYNC_REQUEST_QUEUE"/>
<JMSQueue Name="WLAI_ASYNC_RESPONSE_QUEUE"
JNDIName="com.bea.wlai.ASYNC_RESPONSE_QUEUE"/>
<JMSQueue Name="WLAI_EVENT_QUEUE"
JNDIName="com.bea.wlai.EVENT_QUEUE"/>
<JMSTopic Name="WLAI_EVENT_TOPIC"
JNDIName="com.bea.wlai.EVENT_TOPIC"/>
     
     <JMSQueue JNDIName="com.bea.wlai.WORKSHOP_ASYNC_RESPONSE_QUEUE" Name="WLAI_WORKSHOP_ASYNC_RESPONSE_QUEUE"/>
     <JMSQueue JNDIName="com.bea.wlai.WORKSHOP_EVENT_QUEUE" Name="WLAI_WORKSHOP_EVENT_QUEUE"/>

<JMSQueue Name="WLI_FailedEvent"
JNDIName="com.bea.wli.FailedEventQueue"
StoreEnabled="true"/>
<JMSTemplate Name="WLI_JMSTemplate"
ErrorDestination="WLI_FailedEvent"
RedeliveryDelayOverride="60000"
RedeliveryLimit="10"/>
</JMSServer>
<JMSJDBCStore Name="JMSWLIStore"
ConnectionPool="wliPool"
PrefixName="platformServer"/>






<Application
Deployed="true"
Name="taxWSApp"
Path="C:/bea/user_projects/epmsDomain/beaApps/taxWSApp"
TwoPhase="true"
>
<EJBComponent
Name="tax"
URI="tax.jar"
Targets="platformServer"
/>
<WebAppComponent
Name="tax-webservice"
URI="tax-ws"
Targets="platformServer"
/>
</Application>
<Application
Deployed="true"
Name="paymentWSApp"
Path="C:/bea/user_projects/epmsDomain/beaApps/paymentWSApp"
TwoPhase="true"
>
<EJBComponent
Name="payment"
URI="payment.jar"
Targets="platformServer"
/>
<WebAppComponent
Name="payment-edit webservice"
URI="pay-ws"
Targets="platformServer"
/>
</Application>

<Application
Deployed="true"
Name="wlpDocsApp"
Notes=""
Path="C:/bea/weblogic700/portal/lib"
TwoPhase="true"
>
<WebAppComponent
IndexDirectoryEnabled="false"
Name="wlpDocs"
Targets="platformServer"
URI="wlpDocs.war"
ServletReloadCheckSecs="300"
/>
</Application>

<Application
Deployed="true"
Name="portalApp"
Notes=""
Path="C:/bea/user_projects/epmsDomain/beaApps/portalApp"
TwoPhase="true"
>
<ApplicationConfiguration
Name="portalApp"
Targets="platformServer"
URI="META-INF/application-config.xml"
/>
<EJBComponent
Name="events"
Targets="platformServer"
URI="events.jar"
/>
<EJBComponent
Name="pipeline"
Targets="platformServer"
URI="pipeline.jar"
/>
<EJBComponent
Name="property"
Targets="platformServer"
URI="property.jar"
/>
<EJBComponent
Name="rules"
Targets="platformServer"
URI="rules.jar"
/>
<EJBComponent
Name="usermgmt"
Targets="platformServer"
URI="usermgmt.jar"
/>
<EJBComponent
Name="customer"
Targets="platformServer"
URI="customer.jar"
/>
<EJBComponent
Name="ebusiness"
Targets="platformServer"
URI="ebusiness.jar"
/>
<EJBComponent
Name="portal"
Targets="platformServer"
URI="portal.jar"
/>
<EJBComponent
Name="campaign"
Targets="platformServer"
URI="campaign.jar"
/>
<EJBComponent
Name="catalogws"
Targets="platformServer"
URI="catalogws.jar"
/>
<EJBComponent
Name="document"
Targets="platformServer"
URI="document.jar"
/>
<EJBComponent
Name="ejbadvisor"
Targets="platformServer"
URI="ejbadvisor.jar"
/>
<EJBComponent
Name="mail"
Targets="platformServer"
URI="mail.jar"
/>
<EJBComponent
Name="placeholder"
Targets="platformServer"
URI="placeholder.jar"
/>
<WebAppComponent
Name="toolSupport"
Targets="platformServer"
URI="toolSupport"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="tools"
Targets="platformServer"
URI="tools"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="datasync"
Targets="platformServer"
URI="datasync"
ServletReloadCheckSecs="300"
/>
<WebAppComponent
Name="splashPage"
Targets="platformServer"
URI="splashPage"
ServletReloadCheckSecs="300"
/>

</Application>
<Application
Deployed="true"
TwoPhase="true"
StagedTargets="platformServer"
Name="p13nConsoleApp"
Path="C:/bea/weblogic700/portal/lib"
>
<WebAppComponent
Name="p13nConsole"
ServletReloadCheckSecs="300"
Targets="platformServer"
URI="p13nConsole.war"
/>
</Application>

<Application Deployed="true" LoadOrder="900" Name="EAI" Path="C:/bea/weblogic700/samples/workshop/wlai/ear/" TwoPhase="true">
<EJBComponent
DeploymentOrder="100"
Name="repository-ejb.jar"
     Targets="platformServer"
URI="repository-ejb.jar"/>
<EJBComponent Name="WLI-B2B Startup"
DeploymentOrder="200"
Targets="platformServer"
URI="b2b-startup.jar"/>
<EJBComponent DeploymentOrder="300" Name="b2b-rosettanet.jar" Targets="platformServer" URI="b2b-rosettanet.jar"/>
<WebAppComponent DeploymentOrder="400" Name="b2b.war" Targets="platformServer" URI="b2b.war"/>
<WebAppComponent DeploymentOrder="500" Name="b2bconsole.war" Targets="platformServer" URI="b2bconsole.war"/>
<EJBComponent DeploymentOrder="600" Name="WLI-AI Server" Targets="platformServer" URI="wlai-server-ejb.jar"/>
<WebAppComponent DeploymentOrder="700" Name="wlai" Targets="platformServer" URI="wlai.war"/>
<EJBComponent DeploymentOrder="800" Name="WLI-AI Async Processor" Targets="platformServer" URI="wlai-asyncprocessor-ejb.jar"/>
<EJBComponent DeploymentOrder="900" Name="WLI-AI Event Processor" Targets="platformServer" URI="wlai-eventprocessor-ejb.jar"/>
<EJBComponent DeploymentOrder="1000" Name="wlpi-ejb.jar" Targets="platformServer" URI="wlpi-ejb.jar"/>
<EJBComponent DeploymentOrder="1100" Name="wlpi-master-ejb.jar" Targets="platformServer" URI="wlpi-master-ejb.jar"/>
<EJBComponent DeploymentOrder="1200" Name="wlpi-mdb-ejb.jar" Targets="platformServer" URI="wlpi-mdb-ejb.jar"/>
<EJBComponent DeploymentOrder="1300" Name="WLXTEJB.jar" Targets="platformServer" URI="WLXTEJB.jar"/>

I am having a problem reistalling adobe photoshop elements and premiere 9

I am having a problem reinstalling adobe photoship elements and premiere 9. my laptop had to be re configured and it was removed not i cannot reinstall.? Please help

Please refer to the proper Fora, this Forum is dedicated to Photoshop, not Photoshop Elements.
Edit:
http://forums.adobe.com/community/photoshop_elements

Ghostscript configuration problem: configure: error: no acceptable C compil

hi
I'm having a problem in configuring ghostscript.
When I run "Configure", I get this message:
+Last login: Thu Jun 24 09:04:52 on ttys001+
+/espgs-8.15.4/configure ; exit;+
+iMac:~ timgeers$ /espgs-8.15.4/configure ; exit;+
+checking for gcc... no+
+checking for cc... no+
+checking for cc... no+
+checking for cl... no+
+configure: error: no acceptable C compiler found in $PATH+
+See `config.log' for more details.+
logout
I seem to need to change the path, but I have no idea how to do that. Can anybody help?

bertvtvt wrote:
no, I haven't tried this. I don't know much about these things. How do I change that root and what command do I have to use?
Is this in "terminal"? I haen't worked with this yet...
My Ghostscript-folder is located in my Macintosh HD folder
Yes, you will have to use Terminal. Sorry but I assumed you were already using Terminal. I guess you simply double-clicked on a file within the GS folder...
Anyway, after you open Terminal you will see information similar to what you provided previously, for example:
Last login: Thu Jun 24 09:04:52 on ttys001
iMac:~ timgeers$
This shows that your Mac is called iMac and it also shows the account name you logged in with. The ~ in front of the account name indicates you are in the Users directory. To change to the root, after the $ symbol, if you type cd followed by a / you can then press ENTER and this should the view to:
Last login: Thu Jun 24 09:04:52 on ttys001
iMac:/ timgeers$
The slash after iMac: indicates you are now located at the root of the Mac, aka 'Macintosh HD' for your Mac.
If you now enter cd "My Ghostscript", this should change you to the Ghostscript folder. The last step is to then enter the command you tried previously (if this is what the document tells you to do). Note you should add the leading period before the slash
./espgs-8.15.4/configure ; exit;
If your Mac is correctly configured then you will be prompted to authenticate. However if your Mac does not have the C compiler installed, such as the GNU gcc which was part of the Developer Tools, then you may still get a message about no C compiler being present. Does the supporting documentation mention any prerequisites like having GCC?

I am still having problems accessing java script sites. Anyone else having this problem?

I am still having problems accessing java script sites. Anyone else having this problem?

Javascript can be left on, but Java (which is something very different) should generally be turned off.
Apple barred Java from running on Macs, leaving companies that rely on Java plug-ins out in the cold.
Apple blocked Java 7 Update 11 by adding it to the banned list in XProtect.
This was the second time in two weeks that Apple has blocked Oracle's code from running on Macs. This time Java is blocked through Apple's XProtect anti-malware feature.
Java has come under fire as the means by which hackers have been able to gain control of computers. In April 2012 more than 600,000 Macs were reported to have been infected with a Flashback Trojan horse that was being installed on people's computers with the help of Java exploits. Then in August Macs were again at risk due to a flaw in Java, this time around, there was good news for Mac users: Thanks to changes Apple has made, most of us were safe from the threat.
Unwilling to leave its customers open to potential threats Apple decided it's safer to block Java entirely.
Macs running OS X Snow Leopard and beyond are affected.
UPDATE for those running Lion or Mountain Lion:
Oracle on Friday February 1 released a new version reportedly addressing vulnerabilities seen with the last build.
Apple disabled Java 7 through the OS X XProtect anti-malware system, requiring users to have at least version "1.7.0_10-b19" installed on their Macs. The release dated February 1 carries the designation "1.7.0_13-b20," meeting Apple's requirements.
Oracle "strongly recommends" applying the CPU fixes as soon as possible, saying that the latest Critical Patch Update contains 50 new security fixes across all Jave SE products.
Update foror Snow Leopard users:
Apple have issued update 12 for Java for OS 10.6:
http://support.apple.com/kb/DL1573
Note: On systems that have not already installed Java for Mac OS X 10.6 update 9 or later, this update will configure web browsers to not automatically run Java applets. Java applets may be re-enabled by clicking the region labeled "Inactive plug-in" on a web page. If no applets have been run for an extended period of time, the Java web plug-in will deactivate.

Is Apple Mail having a problem ?

Is Apple Mail having a problem ? I can't send or receive Mail on my iMac.

Apple "Mail" is an App on your computer. We would not know if your "Mail" app is having a problem. Your Profile above says you are using OS X 10.4.10 :Is that accurate? If not, could you please update it so we can help you correctly. If you are really running 10.8, and are referring to iCloud's mail service, the problem is most likely in your settings in "Mail">Preferences>Accounts. That has to be correctly configured to send and recieve thru iCloud.

I am having a problem configuring Audition to allow me to monitor audio with a bluetooth headphone.

Similar Messages

Maybe you are looking for