I am having a problem with airplay on my ATV

I just moved into my new place and I got my Apple TV up and running. I tried to Airplay this morning and I found 20 different ATVs attached to the same community wifi that I am on. So I renamed my ATV and set up a password for Airplay. But neither my iPhone nor Mac can find my Apple TV. When I click the airplay button, it can find about 20 other ones but not mine. I am on the same wifi on ATV and all my devices, everything is updated to its latest versions, and I have already tried reseting both the ATV and my devices. I am using an iPhone 5 and 2nd generations ATV. Nothing seems to be working. Can someone help me please?

Yes the ATV is connected to the network. Its the same network that my iPhone and Mac are connected to. I had to call my internet service provider to have them manually connect the ATV to the network and my account because you usually have to sign into your account when opening a internet browser. But now it is connected to the wifi and the wifi works on it, I've been streaming netflix and such all day on it. I just can't airplay.

Similar Messages

Anybody else having problems with airplay with ios 5.1 on iphone 4s

So i bought an iphone 4s a few months back and it came with ios 5, i then tryed it with my airplay speakers and they kept cutting out so i googles about it and found there was a known problem with iphone 4s and airplay speakers.
ios 5.0.1 then came out a few weeks later and the problem seemed to be fixed and i was happy as they worked fine after that
ios 5.1 then came out so i updated my 4s to this and started playing music through airplay and they started to cut out again, i turned them off and on and it happened again, then i reset them to my wifi router and the problem still occured
Is anybody else having this problem with airplay on there iphone 4s running ios 5.1?
If so, apple really need to sort this out! I bought my iphone with high expectations and to pay all that money for it not to work is not good

Try resetting your device by holding down both the home and lock buttons for ~10 seconds or until the device restarts, ignoring the power slider.

Potential Problems with Airplay and Mountain Lion

Hey Everyone,
I recently purchased an Apple TV, and I tried to use Airplay with our Macbook Pros. Airplay would work with all of the iOS Devices, but when it came to using with the MBP, it would either show a black screen, or a frozen image of my screen. I called AppleCare, and the rep told me it was a problem with the AppleTV, so I returned it and bought a new one, and it did the same thing. I found out that the problem was occuring because of the type of router I was using. I have a dualband router, and I set everything on one band of the router. I decided to try to place the laptops on a different band, and that's all it took. My airplay now works flawlessly.
So, if you're having a problem with airplay, and you have a dualband router, try placing your computer & iOS devices on the opposite band, and it should work perfectly.
Hope this helps.
- Kaytie Walters

The VPN log looks like:
1      13:34:36.904 09/11/12 Sev=Warning/3
CM/0xA3100027
Adapter address 10.211.55.6 has changed or not detected. Current address(es): 10.98.70.169.
2      13:34:52.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
3      13:35:07.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
4      13:35:07.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
5      13:35:08.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
6      13:35:09.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
7      13:35:10.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
8      13:35:11.861 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)
9      13:35:12.407 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)

Apple TV causing problems with Airplay from Airport Express?

I am having a problem with Airplay on my home network. I have two Airplay devices - Apple TV and an Airprot Express. I soon as both of these devices are on my wireless network Airplay starts to create all kinds of errors, delays, inability to connect and ultimately both AP devices crash.
The AE is connected to the existing network and is only being used as an airplay device to send music to a set of speakers.
I have looked at the knowledge base & I tried all of the following (plus every conceivable combination):
Restored both the Apple TV & AE to factory settings.
Checked both are on independent IPs.
Checked all the settings on my router.
Restarted my router.
Changed the channel on my router (it's worth mentioning here that both devices are on a 5GHz connection).
It's also worth noting that when I did a factory reset of everything and set the ATV up on an ethernet connection everything worked swimmingly until I unplugged the ethernet cable and connected the device to the wireless network.
Both work independently (i.e. when the other is not connected to the wireless network), but need restarting if the two have been run at the same time.
So - in a nut shell - it appears to me that the two devices are interfering with each other - but how?!
Are any geniuses out there able to help?
Thanks in advance.

Thanks Winston. I put the APE onto the 2.4 connection. This didnt solve this issue, but then with the two devices on the different connections I changed the channels a few times and eventually I found a coblination that works! I now have a problem where the ATV doesn't wake up to AirPlay, but I feel this is most likely a separate issue.

Apple TV having problems with Airplay

Hi
I'm having problems with Airplay on my Apple TV. It will play A video once then errors out. Wifi has full strength and software is up to date. i have tried forgetting the wifi and reconnecting. This will fix the problem for a moment and then it errors out again. Netflix and everything else seems to be working fine just airplay keeps kicking me out. Does anyone have any suggestions?
Thanks

Hi mrshoughton,
I'm sorry to hear you are having issues with your Apple TV. If you continue to have issues with Airplay performance from your device/computer to your Apple TV, you may find the troubleshooting steps outlined in the following articles helpful. In particular, if you are using Airplay from iTunes on a computer, you may want to rule out any WiFi issues by temporarily connecting your computer and your Apple TV directly to your router via Ethernet, as noted in the second article below:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
Regards,
- Brenden

I'm having problem with airplay. Apple tv 3

I have problem with airplay icon,
dont have airplay icon on ipad/iphone after update to new version
anyone facing this issue ?
i need to restart my ipad then airplay icon show up on ipad/iphone
and i know my english suck , sorry
anyone can help me

http://support.apple.com/kb/ts2446
Security and your Apple ID

Having a problem with eBooks in my iTunes library.

As the title says, I'm having some problems with the iTunes library not reflecting what's actually on the disk.
I add the ebook and it seems to add ok. The file gets consolidated into /mymusic/books under the author correctly, but the book is missing from the library. The book is in ePub format, and seems to have the right file extension and shows up as a file of "ePub" type in windows explorer.
Any ideas? Is there a way to re-build the library or a portion of it?

Hi tony paine,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iCloud: Keeping the Junk folder consistent between iCloud Mail and OS X Mail
http://support.apple.com/kb/HT4911
Cheers,
- Judy

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

I have an iMac and iphoto. Currently I am having a problem with an album in iphoto. When I double click on the album all I get in the main body of the screen is a triangle with an exclamation mark and my 2 photos show at the very bottom of the window.

I have an imac and am using iphoto. Currently I am having a problem with one particular album which shows in the main part of the window a triangle with an exclamation point. The two photos are at the bottom of the main window in the same area where the "info" "edit" "create" area is. I can see the two photos but I can not get them back into the main part of the window. I can't drag them anywhere either. I can't double click or right click on either of the two photos either. All I can do is click on either one and they get a little bigger. Before I saw the exclamation point in the main body of the window all I get is two squares with nothing in them and the entire border is made up of dashes. Can someone help me?

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Screenshot is for iPhoto 9
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Hello sorry but im having a problem with my apple id it appears that i cant download nothing i dont know why but when im going to download something example facebook it appears de app that is charging and then desapere how can i fix that?

Hello sorry but im having a problem with my apple id it appears that i cant download nothing i dont know why but when im going to download something example facebook it appears de app that is charging and then desapere how can i fix that?

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
-Griff W.

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

Having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this

having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
I'm using Lion on an MBP and Numbers is the latest version

May you give more details about what is wrong with your dates ?
M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios

Having a problem with my ipad... I tried to install ios and the ipad has frozen

I am having a problem with my Ipad air. tried to install ios and my ipad has frozen

Click here and follow the instructions.
(124611)

Having a problem with commandButton attribute when i am using it under tabl

Having a problem with {color:#800000}commandButton {color}{color:#339966}attribute {color}when i am using it under{color:#ff0000} table{color}
I am using a command button under a table.
here is the example
<h:dataTable value="#{wlmHandler.plexes.plexes}" var="{color:#ff0000}onePlex{color}" border="0" cellspacing="0" cellpadding="0" width="100%" border="0">
<h:column>
<h:panelGrid border="0" cellpadding="0" cellspacing="0" columns="5">
<h:commandButton action="" styleClass="tixbutton" value="#{labels.ADD}" onclick="#{onePlex.tran}"/>
<f:verbatim> </f:verbatim>
<h:commandButton action="#{createTransaction.transactionCommand}" styleClass="tixbutton"
value="#{labels.SUBMIT}" actionListener="#{createTransaction.processAction}">
<f:attribute name="dbName" value="#{wlmHandler.dbName}"/>
<f:attribute name="plexName" value="{color:#ff9900}#{onePlex.name}"{color}/>
</h:commandButton>
</h:panelGrid>
<h:/column>
</h:dataTable >
when i am using this plex name atribute it is giving nullPointerException
{color:#ff9900}this value #{onePlex.name} i cant able to access inside the command button{color}

balu i have tried by seeing u r blog.
this is my structure of tables
plexes (if i iterate plexes table gives plex object)
|
------ plex (plex table gives transaction object)
|
------transactions(transactions table gives transaction table)
|
here i will have a command link to this link i have to pass the plex name which
will come from
i tried in this command action with HTMLDataTable getRowData()
i am not getting the selected row data .i am downcasting this getRowData() to plex.

I am having a problem with airplay on my ATV

Similar Messages

Maybe you are looking for