I am having a scripting bug.

I picked this project up from a friend, trying to solve a bug he is having but I can't figure it out.
The project is built around scripting which as it turns out, I don't know that well. Whenever you select the slideshow and then hit the menu button, it brings you back to the menu. Then, if you hit the menu button again, it brings you back to the last still you were viewing. If this project was built without scripting I could figure it out but I'm lost.
Here is the log from the actions of my problem. The italicized text is the actions from viewing the slideshow and the bolded text is what happens after I hit the menu button and encounter the bug.
User activated: Special Features button
Executing Pre-Script: Special Features pre-script
1 mov GPRM 7, 2
GPRM 7 register changed: 2
Default button selected: Button 2
SPRM 8 (Highlight Button) register changed: 1024
Jumping to Menu: Special Features 2 - Button 2
SPRM 8 (Highlight Button) register changed: 3072
SPRM 8 (Highlight Button) register changed: 2048
+User activated: Button 3+
+Jumping to (null): (null) - KFJProduction_StillFrame.jpg+
+SPRM 6 (Title PGC) register changed: 1+
+SPRM 4 (Title Number) register changed: 5+
+SPRM 5 (VTS Title) register changed: 1+
+SPRM 7 (Part of Title) register changed: 1+
+SPRM 3 (Angle Number) register changed: 1+
+User action: Next chapter+
+Jumping to (null): (null) - Joe_PrivateEye.JPG+
+SPRM 6 (Title PGC) register changed: 1+
+SPRM 4 (Title Number) register changed: 5+
+SPRM 5 (VTS Title) register changed: 1+
+SPRM 7 (Part of Title) register changed: 2+
+SPRM 3 (Angle Number) register changed: 1+
+User action: Next chapter+
+Jumping to (null): (null) - FataleandPlantman.JPG+
+SPRM 6 (Title PGC) register changed: 1+
+SPRM 4 (Title Number) register changed: 5+
+SPRM 5 (VTS Title) register changed: 1+
+SPRM 7 (Part of Title) register changed: 3+
+SPRM 3 (Angle Number) register changed: 1+
*User action: Menu*
*Jumping to Script: Main Menu loop point*
*Executing Script: Main Menu loop point*
*1 Jump Main Menu 1::Scene Selction Button(Loop) if (GPRM 7 = 1)*
*2 Jump Special Features 2(Loop) if (GPRM 7 = 2)*
*Executing Pre-Script: Special Features pre-script*
*1 mov GPRM 7, 2*
*GPRM 7 register changed: 2*
*Default button selected: Button 2*
*SPRM 8 (Highlight Button) register changed: 1024*
*Jumping to Menu: Special Features 2 - Button 2*
*User action: Menu*
*SPRM 6 (Title PGC) register changed: 1*
*SPRM 4 (Title Number) register changed: 5*
*SPRM 5 (VTS Title) register changed: 1*
*SPRM 7 (Part of Title) register changed: 4*
Can anyone help me?

It isn't a bug... it is working exactly as it should do. This is a well known feature of DVDs, in that the menu button also acts as a resume button if there is resume info stored by the DVD player. To get that info stored, you only have to view a track. Since a slideshow is a special case of a track, there is resume info stored when you view it.
This is nothing to do with your scripting, or anything except the DVD specifications. All discs will work this way.
Where did you expect the second menu press to take you? To a different menu? In order to do that you have to have a button on your first menu that takes you to the other.

Similar Messages

Is anyone else having a weird bug in MobileMe gallery with volume on iOS 5

Is anyone else having a weird bug in MobileMe gallery with volume on iOS 5? I am having a weird problem, where if I view a video I have uploaded and change the volume, I used the on-screen slider and It changed the volume but it also popped up like I was controlling it from the side. I thought that was kind of weird. If you want to see my problem, there will be a video up on Contemputech.com within a half-hour of me writing this.
Thanks!
Nolan

Hello everyone!
I'm hoping you are no longer having problems with your iPhone visual voice mail.
I can understand how frustrating it is to not be able to access such a great feature on your iPhone.
We did determine customers not being able to access Visual Voicemail on their iPhones.
Common errors are "visual voicemail is not available" or it just keeps loading the message.
(In the meantime, you can still review voicemail messages by dialing *86)
This issue should have been resolved for everyone effective 3/2/12.
Please let me know if you are still having problems with iPhone Visual Voicemail by sending me a direct message.
Thanks for your patience with this.
Tamara H.
Follow us on Twitter @VZWSupport

I keep having a script run when I am playing Face Book gams and it freezes everything. what can i do to stop it?

I keep having a script run while I am playing Battle Pirates a face book game or am on Face Book trying to post something. Every time it runs it freezes the darn game and I have to click and click on the screen before a box pops up with a long string and asks if I want to stop the string. what can i do to stop it from running in the first place ? This is what it says:
A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
'''" Script:http://static.ak.fbcdn.net/rsrc.php/v1/yh/r/c6ntS5XVSwP/ks:42 "'''
What is this and dose it need to run or is it a hacker messing with me and my FF browser ?

https://forums.adobe.com/thread/1195540
[topic moved to Flash Player forum]

Script bugs for Oracle8i Sun system

No Sun Platform forum so posting here,
let me know if there is a better place.
I have found script bugs that I fixed
for the Oracle8i sun enterprise server.
1) dbora - used for startup and shutdown
of database, calls dbstart and dbshut.
2) dbstart - script contains errors:
"/PL\/SQL" does not exist in the svrmgrl version output information,
they would be better off storing the version info in a file somewhere during install, like /var/opt/oracle like they do other files.
Must have changed the output of that program for 8.1.
My fix above checks for the 'Oracle8i Enterprise Edition Release' output.
Let me know if someone would like to get
a copy of my take-off scripts.
null

Yes I would like a copy .... thank you!

Why do i keep having java script application error "on HidePage called" everytime i launch, browse and close Firefox?

why do i keep having java script application error (on HidePage called) everytime i launch, browse and close Firefox?
== URL of affected sites ==
http://
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

Hello Bo.
It's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.

CS6 scripting bug / Problème scripts d'action CS6

Bonjour, suite à mon passage de la CS4 à la CS6, mes scripts d'action ne marchent plus.
Ce script par exemple :
Hi folks, going from CS4 to CS6 made my action scripts bug, especially those using pathfinder :
divide / ungroup / default / trim / ungroup / copy / paste in front
Ces actions effectuées une à une donnent un résultat normal mais conduisent donnent une série de messages d'erreur une fois enregistrées dans un script :
These actions do work normally when i perform them separetly but fail as soon as i record it in a script. Does anyone has an idea?
C'est la même chose avec ou sans fond, avec ou sans contour. Ce même script fonctionne très bien sur CS4. Les raccourcis clavier sont les mêmes.
HELLLLPPPPP!!!!!

Bonjour, n'ayant jamais été confronté au problème, je suis allé regarder si la question avait été traitée en anglais.
Mylenium a proposé une explication sur l'accès à certains ports du système.
En fait pour lire une vidéo, Photoshop a besoin de créer un accès à ce fichier, en interne, si ces ports sont inaccessibles (bloqués par une appli tierce, antivirus, firewall (ou pare-feu) ou occupés par d'autres applications), cela peut échouer.

Scripting bugs and anomalies in Acrobat Pro XI

I've downloaded the trial version of Acrobat Pro XI and starting testing it out with various scripts and actions. The results are far from good, I'm afraid.
Here are some of my findings, so far:
1. The Action Wizard is very cumbersome and un-intuitive. It took me several minutes to figure out how to change the default setting to a specific folder, and I still can't find where to select the input file types to be processed. Also, what's the relation between the "Default option" and the Add File and Add Folder buttons? Very strange UI decisions there. I don't care about panels and dividers, but I do want the actual commands to make sense*.
2. Another very bad decision is moving the Save command to a different section. What's the point of making it just another "tool" in the list? If you want to use it, you'll want to use it at the end of the process, not somewhere in the middle... And as it stands now, if you don't add it explictly, the changes are not saved at all.
3. After running an Action, some of the files remain open in the window. I was looking for a Close File command, but couldn't find any such thing. Is this a bug?
4. I'm running a script that processes some files. After finishing, the files are automatically saved and overwritten, even though I haven't added that command yet to my script. Very serious bug!
5. After running some scripts and actions, working with hidden files, I've tried to access app.activeDocs. The result was an infinite loop of this error message:
After a while I had to close down Acrobat from the Task Manager.
I must say I'm very disappointed with this release, so far, and would not recommend anyone to upgrade to it.
* Speaking of commands that don't make sense, what's the point of the Document JavaScripts command in the Action Wizard? All it does is open that window... This doesn't make sense at all in an automated action. It should have given you the option to automatically embed a piece of code in a file, not let you do it manually.

Hi there,
Your feedback is interesting as this is the very first time we receive some negative feedback about Actions in Acrobat XI.
First of all what do you mean by "what's the relation between the "Default option" and the Add File and Add Folder buttons" ?
If don't have the time to go through the help nor documentation here a brief answer:
- Default option allows the author of an action to specify the behavior and settings for the command. In the case of Add File and Add Folder it will drive user running the action about the type of location the file(s) should be retrieved from: a scanner, cloud repository, a specific folder, etc. This is a bit of improvement over Acrobat X, but not a significant change in the behavior.
I hope this is what you were questionning about.
"Another very bad decision is moving the Save command to a different section"
While this may not be convenient for you, I don't think it's enough to state that it's been a very bad decision since most users like it. It's also more flexible and more powerful. It makes it possible for instance, to save a document with a different naming convention at different points of the action which is an important improvement for some users. I am sure that after you've played with it a little bit more you will agree with that.
"After running an Action, some of the files remain open in the window"
Files that have been loaded by the Action playback should be closed, unless that have something special. Otherwise it could be a bug.
" I'm running a script that processes some files. After finishing, the files are automatically saved and overwritten"
It can only be because the JavaScript contains instructions to save the files, or the Action does. Otherwise it would be a bug and I'd be curious to know more about it as Acrobat is VERY robust about this.
Please provide the files in question I'll be happy to spend time debugging the case.
"After running some scripts and actions, working with hidden files, I've tried to access app.activeDocs. The result was an infinite loop of this error message:"
This is out of my scope and will ask around me how it's supposed to work. Hopefully we'll get an answer from the script folks quickly.
Please share files and way to reproduce the issues you meet, considering that you are the first person to provide such negative feedback there might be some misunderstanding somewhere.
Best,
Luc Leroy

Possible scripting bug

I have a script that searches and replaces the characters <br> with \r\n
It works fine in cs3 - cs5.5
In cs6 the script inserts 2 new lines (one for the\r an one for the \n) This seems like a bug as \r\n should result in a single new line (unless I'm missing somethimg)
Mike Cardeiro
Editor/Animator/Compositor
D4 Creative Group - Philadelphia, PA
215-483-4555
Resume | samples
http://www.michaelcardeiro.com/resume/

It sounds like you need to convert the linefeed to Windows-style. Insert this before you start writing lines:
txtFile.lineFeed = "Windows"; //convert to Windows linefeed
Or you can determine what kind of linefeed is in the document and then use that as a basis for conversion:
if (txtFile.lineFeed === "windows") {
    newLine = "\r\n";
} else {
    newLine = "\n";

Scripting bug in the background?

Hi
A few weeks ago I read a post by Alan_AEDScripts about Killing windows (palettes) and that
seems to be true. I´ve been testing some scripts and I found that Functions are also keept in memory even after the function ends
This is a simple window (dialog) tester with 10 buttons.
function dummyWin(){
    var win = new Window("dialog","Dummy Window",undefined);
    for(var i = 0 ; i < 10;i++ ){
        win.add("button",undefined,"Tester");
        win.children[i].onClick = function(){win.close();}
    win.show();
dummyWin()
Before I run it After Effects memory allocated is
and after I run tester script 20 times After effects memory increases in almost 3 megs.This is more visible with windows that has more features and have to be open and close a lot of times.
It seems to be that the same thig happens with ScriptUI Panels
I have a more complex script that when a I run it it increases almost 2 megs to the memory allocated by AE every time I run it .I tried a lot things but unfortunately memory keeps increasisng
Maybe I am the only one who is experiencing this issue.if not this is serius bug that
should be solved right away.
All tests were done in AE CC. Please give it try
Sorry for my English

Hi
A few weeks ago I read a post by Alan_AEDScripts about Killing windows (palettes) and that
seems to be true. I´ve been testing some scripts and I found that Functions are also keept in memory even after the function ends
This is a simple window (dialog) tester with 10 buttons.
function dummyWin(){
    var win = new Window("dialog","Dummy Window",undefined);
    for(var i = 0 ; i < 10;i++ ){
        win.add("button",undefined,"Tester");
        win.children[i].onClick = function(){win.close();}
    win.show();
dummyWin()
Before I run it After Effects memory allocated is
and after I run tester script 20 times After effects memory increases in almost 3 megs.This is more visible with windows that has more features and have to be open and close a lot of times.
It seems to be that the same thig happens with ScriptUI Panels
I have a more complex script that when a I run it it increases almost 2 megs to the memory allocated by AE every time I run it .I tried a lot things but unfortunately memory keeps increasisng
Maybe I am the only one who is experiencing this issue.if not this is serius bug that
should be solved right away.
All tests were done in AE CC. Please give it try
Sorry for my English

Grep scripting bug?

The following grep search works fine from within Indesign (finds all prices that don't have the "€" symbol at the end): ((\d+)?(\.?))+(\d{1,3}),(-)?(\d+)?(?!(.*)?(€)) If I try to translate the same search expression into a script, it doesn't work anymore: ((\\d+)?(\\.?))+(\\d{1,3}),(-)?(\\d+)?(?!(.*)?(€)) How could this be possible? Am I doing something wrong or is it a bug of the software? Any suggestions would be much appreciated Thanks in advance

CS 5.5 win7
works here!? perhaps a mistake in scriptimplementation?
app.findGrepPreferences=app.changeGrepPreferences=null;
app.findGrepPreferences.findWhat="((\\d+)?(\\.?))+(\\d{1,3}),(-)?(\\d+)?(?!(.*)?(€))";
toFind = app.activeDocument.findGrep();
alert(toFind.length)

SAP GUI Scripting bug?

Hi there,
I developed a custom transaction with only one very simple screen. I disabled the application toolbar in the screen settings (checked "Without Application Toolbar"). But when I start SAP GUI via Scripting API, the application toolbar is always shown. I wonder is this a bug or by design?
Does anyone know the work around for this? It's a real show stopper for me
Igor

Hi Gunnar,
if You log via myProgram.exe to SAP, then SAP GUI is running in so-called classical design. This also appears to selected design, if the following to be set:
START -> All programs -> SAP Front End -> SAP GUI Configuration -> Applications -> Add -> myProgram.exe -> Open -> OK-Button
Regards,
ScriptMan

I'm having a weird bug with Flash Professional

When ever I try to draw something, the moment I touch the pen down it makes a line to the bottom of the screen. I have a 10x6.25 Monoprice. Now normally I would assume that there's something wrong with my monoprice but this only ever happens on flash. Everything else works just fine. Oddly enough, If I draw (or even click) in the Pen Pressure Testing box, I can draw a single line just fine, at any length so I know that it works. Then the next lines will go straight back to doing what they did before, unless I click on the Pressure tab again then back onto Flash. I use windows 7.
Yes I have re-installed flash. I've changed the pen tips. I have not touched any settings on anything ever. So I don't know if it's a setting bug. I just hope it's an easy fix Please help!

try resetting your flash preferences and updating your monoprice drivers.
reset your preferences:
dreamweaver: http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
indesign: https://forums.adobe.com/thread/526990
lightroom: http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file
photoshop: https://forums.adobe.com/thread/375776

Script bug is trying to steal account information....

A script run on error is occurring upon loading... The system often displays my account log in information in the window or scrolling bar at bottom of screen....

Timskey wrote:
Someone is trying to hack my apple account
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team..

I think I'm having a script issue..

Hi there Flash forum, I'm having an issue and any assistance would be immesely appreciated.
I'm working with an old ActionScript 1.0 Flash presentation in CS4 (I've been replacing graphics and such for my cousin). The movie has pages that automatically advance once each page's graphics are complete. For some reason, it's hanging on page seven (there's a few pages after that); there are buttons to advance manually, but it also must be able to advance itself. I don't know what could have changed at the seventh page to make it hang. This is the last thing I need to fix to get this thing operational.. anybody here have any ideas on how I can fix it?

It must be whatever tells it to advance the page; maybe it's misreading the graphics as 'done'? I'm not very experienced with Flash, so I'm not sure where to look to see the command or whatnot that tells it to advance automatically. Something or another must have glitched, the seventh page is the only one that doesn't progress to page 8 on its own.. thanks for the help!

SGD 4.5.907 Installer script bug when ttaserv/ttasys has /bin/tcsh shell

When trying to install SGD 4.5.907, I kept getting this error, even though the two users were properly defined:
===============================================================================================
## Executing preinstall script.
ERROR: Required users (ttaserv and ttasys) are not correctly defined.
Setup will now exit.
You must create two user accounts before you can install Secure Global Desktop.
- The user names must be "ttaserv" and "ttasys".
- Both must have their primary group set to "ttaserv".
- You can use any UIDs and GID you want.
- Both users must have a valid shell, for example /bin/sh.
- Both users must have writeable home directories.
- We recommend that you lock the user accounts (passwd -l).
===============================================================================================
After searching for the actual pre-install script and figuring out how it works, I saw the test for user accts and realized it didn't account for a "valid shell" like /bin/tcsh, since it was using an sh/bash type of test construct.
If you want to argue whether or not TCSH is a valid shell, be my guest, but the installer should either handle the shell or the error msg should be a little more clear like "SGD requires an SH, or BASH type shell"

@JRoesler :
The script for installing the users during installation when the users are not created is included some version before the 4.50.907
The SGD version here is only 1 minor version before the latest release.
@aspenhedge:
If I look into the rpm (for Linux install) I don't see a check for a valid shell. It does however try to 'su' into those accounts. I might be wrong in this one.
Can you manually use 'su ttaserv' and 'su ttasys' without any problem? Do these users have a valid home-dir for example.
- Remold

I am having a scripting bug.

Similar Messages

Maybe you are looking for