I am having an issue with exporting in Premier Pro 6. There are a few clips in my sequence that I purposely slowed down using the Posterize Time effect (to 48 FPS), but when I export, it continues to export at 24 or 30 FPS. I don't get it. Anyone have thi

??

    Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Similar Messages

  • Why is it every time I watch a movie or tv show on iTunes the pixels slow down and the audio goes in and out? But when I watch it on my iPad with iCloud it works perfectly?

    My Question describes what I would initially say here.
    All of the content is downloaded on my 2013 Windows HP in iTunes. Before last year I never had this problem but now all of a sudden the picture and audio will stop. The annoying part is that the video will continue playing but the audio will go out and/or vise versa.

    Try resetting the SMC before you take it in.
    Barry

  • Hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

    hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

    Hello, give this a try...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • I'm wanting to use the "Actions" in Photoshop Elements 11.  But when I get the Actions box up, it is only showing a small list of effects to use.  And no side bar to go any further.  When I click on the little arrow at top and then click on "load actions"

    I'm wanting to use the "Actions" in Photoshop Elements 11. But when I get the actions box up, it is only showing a small list of effects to use. And no side bar. So I can't go any further.  When I click on the little arrow at top and click on "load actions", I am only getting a box with empty space saying "No items match your search".  The folder at the top does say "Actions".  How do I get more effects?  The tutorials that I've checked into all show a long list of effects in their box.  Can anyone help? 

    To use the existing actions, try the following:
    1. Open one of the Action Sets, in this example Special Effects is the Action Set, by pressing the small arrow beside the set name.
    2. Then click on the name of the Action, in this example Faded Ink is the Action name.
    3. Then press the Play button to run the action.

  • When using the text box( typewriter ) It appears black but when I click away it is a lighter grey. I am using Adobe Acrobat Pro 10.1.13

    When using the text box( typewriter ) It appears black but when I click away it is a lighter grey. I am using Adobe Acrobat Pro 10.1.13
    . How do I fix this? It never used to do that.@

    Hi cj0094,
    Please try changing the registry key HKCU\Software\Adobe\Adobe Acrobat\10.0\Annots\cAnnots\cfreetext_003_afreetexttypewriter and change the opacity back to 1. This should reset the color to black.
    Note: Please backup the registry before modifying it.
    Regards,
    Rave

  • I've imported some midi tracks, used the mixer to set pan, volume etc, but when I stop playback and restart it sets every midi track back to '0'. I've been using LE for years, this is a new one, any ideas?

    I've imported some midi tracks, used the mixer to set pan, volume etc, but when I stop playback and restart it sets every midi track back to '0'. I've been using LE for years, this is a new one, any ideas?

    Hi,
    that's because Logic reads the volume information out of the imported MIDI tracks and sets the volume fader according to this information. The MIDI information overrides volume settings you have done, so you have to identify the MIDI events that contain volume (or expression or pan or whatever) information and delete them. You can use the event list editor for this.
    Fox

  • HT4623 Please help . I have had an iPad 3 for a while and am very happy . I re cently moved from a blackberry to a IPhone 5 and am having some difficulties with it. While my iPad connects to wifi very easily my iPhone says that it can not even find the ne

    I Can't get my iPhone to connect to wifi while my iPad and computer have no problem in connecting . The iPhone says it cannot pick up the network. I've tried rebooting several times but nothing works . Am I missing something ?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    For further help, post in the iPhone forum. This is the iPod touch forum

  • My ipod had a little rain damage and screwed up but later on fixed it and was fine. Later on that day the connect to itunes screen popped up and when i connected it it said "your ipod has a passcode" and then says try again. can anyone fix this?

    Yeah everything is in the question so plz hep me....

    Quinten,
    It will erase all of the information on your ipod. When was the last time you synced your ipod? If recently you should be able to recover most of your files. If not you will only be able to have the files since you last synced it to your computer. Can it sync it ignoring the passcode? If so try that. If none of these work you may just have to plainly restore it or put it in recovery mode.
                                                                          Thank you for choosing Apple!
                                                                               MH, an Apple expert

  • HP 15-f024wm laptop, Certain keys don't respond well, anyone have this issue???

    Hi, I recently bought a HP 15f-024wm laptop and I've had keyboard issues from day 1. The problem is mainly with the "H" key and the comma key. They do not respond well unless I press them hard, which is really aggravating when you're trying to type fast. I always have to be conscious of how hard I'm pressing the keys or else keystrokes are missed. Does anyone else have this problem? I keep thinking that maybe it's something I did, but I've been super careful with this laptop so I can't think of anything I could have done to cause this.  If this is just how the keyboards are, then I can live with it, but it's bothering me not knowing if it's something I did or if this is just how they are.  I really do not want to have to return this laptop. I like everything about it except the keyboard. Anyone else experience this issue?

    @vincentd1215 ,
    Thank you again for posting back with your information.  When dealing with a key issue like you are having it usualy due to the contact pad on the keyboard being worn or having something not letting it make full contact.
    To fix this you would have to normally have the keyboard replaced.
    Before that try first updating the drivers for the keyboard.  Here is a link for your notebooks support page.  Here you will find the software and drivers.  As well you will find the Maintenance and Service Guide.  You can use that to see if you can open up the notebook and check to make sure the keyboard is in place and connected correctly.
    HP 15-f024wm Notebook PC (ENERGY STAR) - Software & Drivers
    HP 15 Notebook PC - Maintenance and Service Guide
    If this does not help please contact HP phone support for repair options.
    Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Every time i try to open logic pro 9 this box opens to download basic content that logic wants to update. i tried 3 times, and it does finish, but when i go to open logic again, box reappears. Can anyone tell me how to fix?

    Can anyone help me? Every time i try to open logic pro 9 i get a box telling me logic wants to download a 2G basic content download, but even when it completes, on trying to open Logic it re-appearres and I cant get into Logic.Doesn't appear in downloads, very confusing!!

    Try manually downloading and then installing the additional content using this link instead....
    http://dl.dropboxusercontent.com/u/2972851/logic-downloads-fixed.html
    Note: For anyone else reading this.. This link is for the additional content for Logic Pro 9 and not for Logic Pro X.
    Remember to quit Logic Pro 9 prior to installing any additional content files.
    If you find you have problems downloading the files from this link you may need to also use JDownloader 2 beta to help you...
    http://jdownloader.org/download/offline
    Despite the warning notice that it is a Beta product, it works very well... Just remember you have to install Java first, if you haven't done so already.

  • When I attach USB flashdrive to my new Mac Air no icon appears.  I just finished downloading pictures off of old mac and that one worked as expected.The new computer doesn't show anything but when I pull USB out pompts message improper eject. Any ideas?

    When I attached my USB flashdrive to my new Mac Air no icon appears and the same when I attached my new superdrive.  I just finished downloading pictures off of my old Mac and that one worked as expected. The new computer doesn't show anything but when I pull the USB flashdrive out, a message prompts me with an improper eject notice. Any ideas on why no icon (a disc) appears and how can I get it to?

    Open Finder preferences, click on the General icon in the toolbar. Check the boxes for what you want displayed on the Desktop. Click on the Sidebar icon in the toolbar and do the same for what you want displayed in the sidebar.

  • I've downloaded the new version according to Creative Cloud but when I try to launch the app the window appears saying there is a new version, so I click on download now and it crashes. What's happening and what should I do? Thanks.

    I've down loaded the new version according to Creative Cloud but when I try to launch the app the window appears saying there is a new version, so I click on download now and it crashes. What's happening and what should I do? Thanks.

    Thank you so much. I finally got it to work. I don't know why it has to be such an ordeal when it comes to Adobe products!
    Todd
    Todd McVey
    Art Direction
    201-723-0104
    [email protected]
    www.toddmcvey.com
    @mctwitthis

  • I have put several clips with transitions into the timeline in final cut pro. There are two clips which are followed by transitions which do not play at the right speed. It is extremely frustrating, can anyone help?

    I have put several clips with transitions into the timeline in final cut pro X. There are two separate clips which are followed by transitions which do not play at the right speed. I'm at a loss as to why this is happening - any thoughts/help?

    The two HD clips were purchased from itunes (MPEG - 4) and converted to .mov for use in Final Cut Pro. Project properties - 720p HD 1280x720 (60p)
    Is this enough information?

  • I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer w

    I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

    I am having issues with my web module on Lightroom 4 (Mac OS 10.9.5). "an unknown error occurred" while trying to upload to my FTP (no changes in my FTP). Bandaid fix was to export to local folder and upload via Filezilla. However, now that is no longer working and although upload completes, the URL takes you to a "Forbidden - do not have permission to read this file" page. Lightroom is changing the permissions of each file to 000 instead of 644 for index files and 755 for all others. How can I change the permissions settings in Lightroom?

  • I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

    I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

    Ok so I've done what you said and this is what it's come back ....
    I don't know that these are the errors , but they're the things which don't look right ...
    Throughout the shut down there is a recurring line ;
    It says ;
    Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
    Then there are 2 more which I think are related ;
    Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
    Then the same with fseventd 48 and diskarbitrationd 13
    Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
    Then the last process says "about to call: reboot (RB_AUTOBOOT).
    Continuing...
    And stops ...
    Hope this means something to you ... Thanks again for your help so far :-)

Maybe you are looking for