I am having problems with the sounds. Please help I am very worried about my iPad 2
I tried restarting my iPad so the sounds would go normal but every time it goes to the homepage it's muted. When I receive a mail it's muted, when I am playing a couple of games it's sometimes muted and when I type it's muted. I checked the settings if it was muted but it was turned off. I imported my headphones and most of the apps I can hear but when I type It doesn't make the sounds. Any ideas to fix the sounds?
Have you got notifications muted ? Only notifications (including games) get muted, so the Music/iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
Similar Messages
-
Having problems with USB cable, please HELP!
While trying to download aim/aol I was having problems with my USB cable and my phone being connected, it was like they were showing they were conneted but when I tried to download aim it said no drivers were recognised. My phone was giving me the option when the USB cable was plugged in asking me if I wantd to do something to do with the media mass storage.
Anyway, once the drivers were downloaded to my comp and I plugged USB cable into my phone and comp i'm no longer being asked on my blackberry about the mass storage, my phone doesn't seem to be recogniaing tht it's linked up to my computer at all even though it's showing the little plug thing in my blackberry and coming up on the computer.
Is there anybody out there who can help me?!
Please!
Cheers!Go to Options -> Media Card -> Mass Storage Mode Support: On
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit -
I'm still having problems with XUL Runner - please help am getting desperate!
I recently sought help over a problem I am having with FF. When I try and load it, I get a message telling me that XUL runner 1.9.2.11 is not compatible with 1.9.2.12. The advice I received was to do a clean install. I have done this a number of times - using the Uninstall option in Control Panel as well as running the uninstall utility in the Firefox program folder. Each time I reinstall, and get the same problem. The only difference is that a few days ago I was installing FF 3.6.10, and that gave the error message that XUL runner 1.9.2.11 was not compatible with 1.9.2.10.
I have FF set as my default browser, so when I click on links in e-mails, etc. I get the same failure to load symptoms. However, I found by chance that FF works OK in conjunction with System Mechanic 10 - a maintenance utility I have on my machine. If I select the on-line help option from that Menu, FF loads and runs OK. I can open new tabs and have no problem loading other pages. However, even with FF open, if I click a link in an e-mail, I get the XUL Runner error message.
Although not all symptoms are the same, I am also having problems with IE8. When I run the program it loads, shows a 'connecting' message in the tab header, then closes. If I uninstall FF, then System Mechanic selects IE8 as the default browser, and as with FF, loads OK.
Chrome and Safari both run OK (thankfully). there must be someone out there who knows what this all points to - is that person you?!
Note: Trouble shooting information retrieved using FF when opened with System Mechanic.If you have such problems then you need remove the Firefox program folder before installing a new copy of the full Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling. -
HT204387 Hi I'm having problems with my Bluetooth please help me thank you
Hi I'm having problems with Bluetooth it wont light up
What light are you talking about?
iOS devices don't, by the way, have the BT profile for transferring files. You can connect to keyboards, headsets, speakers, car kits. -
I'm having problems with my ringtones please help
I have tried everything to fix my BB Curve problem even down to the battery. I have custom ringtones set for my husband and other family members. So whenever they call or text I know who it is.. Now my issue is that if I get a text from my son his ringtone will sound than if I get a standard text my son's ringtone will go again. Not the default for just regular ringtones. I took off my facebook becuase someone said that could be a problem. Verizon sent me a new phone and I entered everything manually so if there was something wrong I wouldn't transfer the problem to the new phone. It's not fixed. If someone could please help me. I'm getting ready to turn my BB off completely it's that frustrating. Thank you for any help.
It sounds as if you are saying that any "non-specific" SMS sender receives that text tone of the last one you have set a personal tone for who has texted you?
I don't know. I can only say that if you use those instructon in the guideline, they work.
There is a user here named Cathlabnurse, she has a good understanding of these settings... Maybe you could send her a Private Message to review your settings with you.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Having problems with Frontrow. Please help!
Hi,
i've been trying to figure this out all day today but i haven't found any solution. hopefully you Mac Geniuses can help. now, my problem isn't that my videos won't play, because they do. they all play perfectly. okay, so when i launch Frontrow, all my video files appear under their respective folders; my TV Shows appear under the TV Shows folder and my Music Videos appear under the Music Videos folder. however, for some strange reason, these files also want to appear under the Movies folder. That means they're showing up twice! -under the Movies folder and TV Shows/Music Videos. is there anyway to fix this, because it's really cluttering my Movies folder and i admit i'm a really anal neat-freak.
Also, i have correctly labeled the video files as Movie, TV Show or Music Video under iTunes. Everything is organized well under iTunes, so i doubt it's that.
please help!!
Message was edited by: ec84It might be because with the new update, it seems as though anything stored in the MOVIES folder , shows up under movies in Front Row. I have a folder of Transformers AVI'S in my movie folder, now it shows up in the movie directory of front row
-
Jpl problems with the lombard please help........
It takes 1+1 starts (the last time) or 111 before and 11+1+1+11 another.
But it will start up and it run well in 10.4.8 sometimes it crash (lately since the problem start never before) but other wise runs good.
I have looking into your other similar threads and don't since to unhesitant them well maybe mine is different i hope so.
Another thing they all end up on the logic board no before going to the OS 9 test(?) I may right.
Also my battery don't take charge anymore never used that much but is good to have it.
I hope you have the time to look at this thread and help me.
And happy New Year to you and all of you too.
nhylonhylo,
Unfortunately this error message is not good news. A common problem with Lombards is a failure of the L2 cache (cache memory) located on the microprocessor card. The 512K L2 cache will often appear/disappear in the System Profiler but nonetheless is still bad. The only fix is a replacement microprocessor card.
http://docs.info.apple.com/article.html?artnum=51159
As far as starting up, usually pressing the power manager reset button on the back panel will allow a successful start.
When you buy a replacement, you must make sure it can run OSX with memory in the top slot. Frankly I don't know how you can be sure of this except to purchase the card from a vendor who guarantees his product. -
Having problem with my cisco857w , please help
Hi Guys
I have cisco 857w, i managed to configure it and I use it as wireless modem router, I have PC, VOIP adaptor and 7 wireless devices connected. i can access the internet from all of them no problem ,but the issue I have is I can't ping any wireless laptops from any other wireless. the reason I need to do that is because i can't install my wireless printer on my wireless laptops. but also I have to mention the PC connected through one of the FastEthernet port of the router I can print to the printer wirelessly. this drive me crazy. I attached my config. thanks for you help
DavidHi David,
I believe it would be best that you post this thread in the Wireless and Mobility community
https://supportforums.cisco.com/community/netpro/wireless-mobility
You should have better chances there. Good luck!
Luis -
I'm having problems with the Spry Widgets, Help!
I'm using Dreamweaver CS6 and Have installed it twice, to no avail. When I try to insert any of the spry widgets, I get the HTML code for the widget but none of the javascript or css code and I cannot figure out why. Also, The Spryassets folder never get created. Is there anyone that help me figure out what I might be doing wrong. If all you got is "Spry is no good, use Javascript", then don't bother responding. All other useful suggestions are greatly appreaciated,
KHi Fehmi76,
The article linked below details how to go about seeing what apps on your iPhone are using what amounts of space.
See how much storage you've used on your iPhone, iPad, and iPod touch
https://support.apple.com/en-us/HT201656
Regards,
Allen -
Jpl problems with the lombard please help........#2 corrected
It takes 1+1 starts (the last time) or 111 before and 11+1+1+11 another.
But it will start up and it run well in 10.4.8 sometimes it crash (lately since the problem start never before) but other wise runs good.
I have looking into your other similar threads and don't since to understant them well maybe mine is different i hope so.
Another thing they all end up on the logic board no before going to the os9 test(?) I may right.
Also my battery don't take charge anymore never used that much but is good to have it.
I hope you have the time to look at this thread and help me.
And happy New Year to you and all of you too.
nhylo- see other post-
-
I am having problem with my sound, after i updated to ios 6, apple please help
i am having problem with my sound, after i updated to ios 6, i can hear music with headphone only, apple please help
Try going into your settings and 'reset all settings'
You will need to retweak your device but it's been said to help with sound issues. -
I Am having problems with the video freezing and the sound carrying on whilst watching BBC IPLAYER ITV PLAYER until I reboot video and the problem acures again
Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library. -
I am having problems with the charging port of my iPhone, it is not bring recognised on my laptop and directly to an electrical socket. Please what should I do?
Check that the LCI in the dock connector of the iPhone hasn't been set off as shown in the article below:
http://support.apple.com/kb/ht3302
Try a reset aswel:
- hold the home button and sleep/wake button down for atleast 12 seconds
- release both buttons as soon as you see the apple logo appear -
Is anyone else having problems with the Canon Online Store?
In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store. They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
Is anyone else having problems with the Canon Online Store?
Why does Canon not care to track reported problems with the storefront part of their web-site?
I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far. Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not. In trying to register that lens, I looked up on the Canon web site where to find the serial number. Since my new lens did not have any numbers there, I was concerned I had been sold a fake. But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was.
Is Canon like that with other problems, as well? Or is their "batting" average better than my very limited experience?
I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral": EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)!
Regards and Thanks,
Calen
As an old friend used to always say,
"Keep Looking Up!"
CalenHi Danny. Thanks for replying.
I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years. And, yes, it is the latest version. Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT? WHEN did Canon STOP SUPPORTING Firefox?
I've been told that there are 2 pending orders in my account. Yet, I NEVER placed those orders! WHY CAN'T CANON SEE THAT THIS IS A PROBLEM???
Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place! But, maybe that's a bit too grown up of an answer for you!
"Award-winning" support??? And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS??? The OSTRICH?
Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
Thank you for your "prompt" attention to this matter!
Calen
As an old friend used to always say,
"Keep Looking Up!"
Calen -
Having problem with Ipod Sound
I am having a huge problem with the sound for my Ipod. I was recently at a concert and using my car audio conversion in both my Ipod and my girlfriends, when I unplugged it from hers to mine I lost all sound to my Ipod when I plug in my headphones now or when I put the receiver back into the bottom. I have reset and restored it and run the diagnostics check to see if it could be the USB or the headphone Jack. Both are in working order but I am still not getting any sound to my Ipod. Can anyone help me with this problem? My Ipod is my life staple for my morning commuet.
You can try to following to rule out/fix a software problem:
- Reset. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If still a problem you very likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Maybe you are looking for
-
hi guys i have a small problem with the lovs. thats is the lovs have to be put inside the cabo/jsps directory . is there any way to avoid this . i want to keep the lovs with the other uix pages, but it is currently not possible. could u tell me if th
-
Hello. Question to Flex guru: I have too long text in Legend for chart. How can I do line folding or how can I show toolTip for legend item (like for a Label object)? How can I initialize Legend object with array of LegendItem objects? Sorry for my e
-
Process flow of lean warehouse management
hello experts can any body explain the whole process of material receiving, material outgoing , inventory management in lean warehouse management . i have already configured lean ware house management. i suppose material receiving will be same as in
-
I have a program that compares DAQ values to a threshold value. If the value surpasses the threshold, an led blinks. The problem is, if the value then goes back below threshold the blinking will stop, as a result of the comparison being False. What I
-
Can anyone tell me how i can bring my moving stills to a slow stop after i have applied the throw effect? Im using motion to import into finalcut for a doco, advice would be diggity. cheers, Si