Legend item text too long

Hello.
Question to Flex guru:
I have too long text in Legend for chart. How can I do line
folding or how can I show toolTip for legend item (like for a Label
object)?
How can I initialize Legend object with array of LegendItem
objects?
Sorry for my english :)
Thanks in advance.

Im not sure what your asking exaclty as my english is bad
too, however i know that the label will only show one line of text,
for wordwrap or multiple lines i think you need to use the "Text"
control.

Similar Messages

Exclamation mark says text too long...but it's not

My captions are 2 lines long, and they fit in the caption box. But I get an exclamation mark anyway -- the text warning that means (I think) "text too long."
When I print the book on my color printer, all the text appears just fine.
So here's question 1: If I try to send a book with text warnings, will Apple reject the file until I have made the warnings go away?
And question 2: If the captions print just fine on my printer, are they likely to print just fine at Apple?
Many thanks!

When you order the book, a PDF will be created. That PDF is what gets uploaded to Apple (via Kodak) for printing. So the best way to check your book before ordering is to create a PDF, then inspect it. Chances are, what you see in your PDF is what you will get printed.
To do this, select your book and do File > Print. You'll get an "Assembling book" progress bar. That can take several minutes. When done, you get the Print Dialog box. Click the PDF button and choose "Save as PDF..." Choose a name and location for the file (the Desktop is convenient) and Save. Then switch to the Finder and open that PDF in Preview.
While I have not observed (or even tried to observe) for myself, I have read here from others that the PDF created this way may differ slightly from the one created by selecting Preview in the first Print dialog, and that it will more closely predict the final ordered book.
My captions are 2 lines long, and they fit in the caption box. But I get an exclamation mark anyway -- the text warning that means (I think) "text too long."
I have that warning on one of my text boxes, too. It looks fine in iPhoto, fine in the PDF, and printed fine when I ordered the book from Apple.
Regards.

Workbook Precalculation: "Message text too long:

Good day
I have setup the precalculation server/services and all is well except for the size of some workbooks. I receive the following message:
u201CThe message could not be delivered to recipient because the message
text was too long. The node used supports messages up to a a length of
20,000,000 bytes. The message text is, however, 43,152,918 bytes long.u201D
I have deleted the results from the workbook before precalculation and the file is zipped for email.
Where in BW will basis have to increase the size when a workbook is precalculated and mailed?
Thanks in advance.
Cj

Hi,
Please refer this link for the same -
Re: error Entry is too long is displayed for the text edit
Regards,
Lekha.

ERS (transaction MRER) - Item text no longer populated

Hi
We are upgrading to version ERP 6.0. We are using ERS (transaction MRER) to auto-post invoices for GR based purchase orders. In the old version the Item text has always been updated with the text "Evaluated Receipt Settlement" but in the new version the item text is blank. Does anyone know what I need to do to get the system to populate the item text again?
Thanks

Your Template code is incomplete / corrupted.
That's why you can't edit it.
Try opening your .dwt file in a plain text editor like NotePad. Remove the editable regions from code. Save. Open in DW.
You will need to SaveAs Template (same name as the one used by your child pages). Add editable regions to match the ones in your child pages. Save.
Nancy O.

Tree component display problem when text too long???

hi all
whenever i use a tree component to display some sort of text, i run into problems when the width of the text being display for a node is larger than the width of the tree component.
Given: Tree tree1 with Node node1 and Child Node child1
When the text of either node1 or child1 is longer than the width of tree1, the text is displayed on its own single line UNDERNEATH the node images. this makes the text look like it does not belong to the group of children of a given node.
is there anyway to add maybe a text area or some sort of scrolling region to allow for any length of text for any node??
thanks everyone!

Yes, you can change the size of the tree node text field. Please see the "Tree Node Component Properties Window" section in the Help Contents within the IDE. Look at the info under the "Appearance" section.

JtextField text too long problem

I have a little problem, I'm sure its very very simple to fix. The text I put into my JTextField is longer than the visible portion, so when I put text in there it keeps scrolling it to the end, so the start portion of the text isnt visible anymore (it scrolls it to the end instead). Now obviously I would rather want the beginning portion of the text to show, but I havent found a way to do that nicely (there must be some simple setting/function for this). And I dont want to crop the text either...
Thanks :)

Use a JTextArea and call setCaretPosition(0) method on it.

Work item subject too long

Hi,
Have 2 queries :
1. Work item subject is getting truncated after 50 chars... Is there a way to print 100 chars ?
2. How to display a link of PO display in a mail to Outlook from Workflow ?
Thanks
Minal

Hi,
1. For more than 50 charerters in workitem text,
this is not possible as it is a standard ( by sap ).
You can search some sap notes to make it more than 50 char.
I can not remember sap note number currenty.
2. To display a link of PO display in a mail to Outlook from Workflow , please use the extended notification for this pourpose.
you can find lot of blog/threads in sdn regarding this. you can take help also form saptechnical..com
sap technical..com >> Tutorials >> Workflow >> Extended notification
Thanks and regards,
SNJY

Item text is populationg Partially in adobe form

Hi All,
I have a problem in printing item text in adobe form.
item text is having more than 100 lines which is being populated in adobe form.
the subform text is created in layout and there a TEXT node is created which has text
this TEXT node in subform text prints item texts.
now problem is that suppose there are 100 lines in item text then 60 lines are being printed and the rest 40 lines are not printing in adobe in next page... from next page next item text are being printed...
When i increase the page height till some lenght then rest all 100 line is getting printed but in single page...
I want item text to be printed in 1st page and 2nd page also if item text is long ( ie. 60 lines to be printed in page 1 and rest 40 lines should be printed in page 2)
Thanks

Hi,
Have you checked, Object palette --> Layout --> Expand to fit?
Thanks & Regards,
Sanoosh

Reg: Sales Order Item Text alignment

Dear Experts,
I am having one biilling document no in VF02 transaction with
item text tabmaterial long text column one custom typed
message is there.I am having custom program for Excise Invoice. If i am having
material long text means my pgm will display long txt only
otherwise it will display item description defultly from the
database table. When my progrm displaying the material
custom long text description alignment is not coming properly.
**********following this part is coding part of my program.
DATA : BEGIN OF LTEXT OCCURS 0,
       MATTXT(30),
       END OF LTEXT.
DATA : V_POS TYPE I.
DATA : ITEXT LIKE TLINE OCCURS 0 WITH HEADER LINE.
* Material description - long text
      CONCATENATE IVBRP1-VBELN IVBRP1-POSNR INTO TXTNAM.
      TEXTNAME = TXTNAM.
      PERFORM READ_TEXT TABLES ITEXT USING 'ZMLT' 'VBBP' TEXTNAME.
    IF NOT ITEXT[] IS INITIAL.
      LOOP AT ITEXT.
        DO 5 TIMES.
          IF V_POS GT 110.
            LTEXT-MATTXT = ITEXT-TDLINE+V_POS(30).
          ELSE.
            LTEXT-MATTXT = ITEXT-TDLINE+V_POS(30).
          ENDIF.
          IF LTEXT-MATTXT IS INITIAL.
            EXIT.
          ENDIF.
          APPEND LTEXT.
          V_POS = V_POS + 30.
        ENDDO.
        CLEAR : V_POS.
      ENDLOOP.
      ELSE.
      SELECT SINGLE ARKTX FROM VBRP INTO IVBRP-ARKTX WHERE VBELN EQ IVBRP1-VBELN AND POSNR EQ IVBRP1-POSNR.
      CLEAR V_POS.
      V_POS = STRLEN( IVBRP-ARKTX ).
      LTEXT-MATTXT = IVBRP-ARKTX+0(30).
      APPEND LTEXT.
      IF V_POS GT 30.
      LTEXT-MATTXT = IVBRP-ARKTX+0(30).
      APPEND LTEXT.
      ENDIF.
      ENDIF.
    READ TABLE IVBAP WITH KEY VBELN = IVBRP-AUBEL MATNR = IVBRP-MATNR.
      IF LTEXT[] IS NOT INITIAL.
        LOOP AT LTEXT.
          CALL FUNCTION 'WRITE_FORM'
            EXPORTING
              ELEMENT = 'DETAILS'
              FUNCTION = 'SET'
              TYPE     = 'BODY'
              WINDOW   = 'MAIN'.
          CLEAR : IVBRP1-MATNR, IVBRP1-FKIMG, IVBRP1-VRKME, TABX ,IVBAP,IVBRP-ARKTX.
          CLEAR : IKONV,ASSESSABLE, PRICE.
        ENDLOOP.
      ELSE.
        CALL FUNCTION 'WRITE_FORM'
          EXPORTING
            ELEMENT = 'DETAILS'
            FUNCTION = 'SET'
            TYPE     = 'BODY'
            WINDOW   = 'MAIN'.
* CLEAR IVBRP1-MATNR.
      ENDIF.
      REFRESH LTEXT.
      CLEAR TABX.
      CLEAR : PRICE, ASSESSABLE, PFCHARGE, EXCISE, EDUCES,
              SHEDU, VAT, CST, FRIGHT, INSURANCE, ADVANCE, ADVANCE1.
    ENDLOOP.
    REFRESH : IKONV, ITEXT.
and i am displaying in my form as &LTEXT-MATTXT(C30)& like this variable in main window.
Kindly do the needful as early as possible.
<REMOVED BY MODERATOR>
Thanks,
Sankar M
Edited by: Alvaro Tejada Galindo on Dec 25, 2007 9:22 AM

Hi:
Thanks for the response.
Yeah, when I try to create an Order manually with the item category that is coming in IDOC I am able to see the Text ID's at the item level and I am even able to save some text in them.
Do you think we need to do something else somewhere? May be we need to explicitly write some additional logic in order to save the item texts.
Thanks.

Ring Item text string too long to display all - use ellipses ?

The width of my Ring control is not wide enough to display all characters in the Item text string. LabVIEW simply truncates the text with no indication that additional text is present. Is there a way to display an ellipses in such cases ? For example :
"Ring text string that is too long"
that is now shown as :
"Ring text string that i"
could be shown as :
"Ring text st...too long"

A couple of suggestions:
1.) Use property nodes to determine which strings are too long, then concatenate the strings with ellipses.
2.) Increase the height so the text wraps.
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust one and then have to copy and paste this length.

Is there a way to change the master text length in FCP? The default length is 10 seconds, which is too long. I can easily adjust the length but I don't want to do it each time, and I don't want to adjust a text clip and then have to copy and paste this each time. Ideally, there should be something in User Preferences but there is not. Thanks.

Maybe some one else can pipe up with a solution, but this would literally take 2 seconds to do for a new project. And you can create a "template project" that includes this "text" clip. Save this project and then to a get info and check "stationary pad." When you double click on this file, fcp will open with a copy of this project and you just need to do a save as.
I've been working with computer editing systems for longer than i can remember and at a certain point you just have to adapt your workflow to the limitations of the software.

ICal stopped because of too long reminder text

I have copied a text into iCal as reminder, but apperently this text looks too long and therefore every time I start up iCal on my Mac it kind of crashes.
I can see my calendar but not add or change anything.
Does anyone have the same experience and can anyone tell me how to solve this issue.
iCal still works both on my iPad and iPhone without any issues, but on my Mac is crashes instantly when I start it up.

I solved the issue myself by removing 'reminders' via my iPhone, update iCloud, and voila iCal works again on my Mac :-)

Problem loading hierarchy long text. Item text only displays 45 characters

Hi,
When loading the Financial Statement hierarchy from ECC to BI I am only getting a 45 character long text for the nodes. This text seems to correspond to the "Item" text seen in transaction fse3 in ECC. However, the text that I need to have is the (concatenated) long text enterer in the multiple fields under either "End of Group" or "Start of Group" (under Item: Display Texts in fse3).
Does anyone know if it is possible to extract this information and how to go about when doing this?
Points will be rewarded for help.
Regards
Nils

Hello Vânia,
>> fac586, Thank you very much for your help ….
Just so you know, fac586 is called Paul :).
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

How to Populate long text(item text) from BOM CS01 to CJ20N transaction

I have requiremnt in which i need to Populate long text/item text of BOM from CS01 to CJ20N transaction(PS network)

Hi Naveen,
for anylong text related work use the functions READ_TEXT and SAVE_TEXT.
read the long text of the BOM item using the proper header and then populate the same text lines to the PS network using the new header specific to the PS network.
Prabhas.

BOM Item Text/Long Text

Hi Gurus,
I want to change a BOM and update/create the BOM Item text/Long text. I just want to change the BOM and create an item text (If the text is more than 80 chars, then I should be able to create a long text).
I tried using FMs SAVE_TEXT and CREATE_TEXT without much luck. Could someone throw some light on how to achieve this.
R

Thanks Sudheer. Yes, I'm passing the correct parameters. Please see below.
        CONCATENATE sy-mandt ls_stpo-stlty ls_stpo-stlnr
                                 ls_stpo-stlkn ls_stpo-stpoz
          INTO lf_tdname.
          CALL FUNCTION 'CREATE_TEXT'
            EXPORTING
              fid       = 'MPO'
              flanguage = sy-langu
              fname     = lf_tdname
              fobject   = 'BOM'
            TABLES
              flines    = lt_lines
            EXCEPTIONS
              no_init   = 1
              no_save   = 2
              OTHERS    = 3.
The thing is that it should save the text in Line1 and line 2 of the item text if the length is less than 80. I assume that the TEXT Fms will do it for me. Please correct me if I'm wrong.
I have also tried a direct database update by changing the stpo-ltxsp field. No luck again. Did someone has updated/created the text using this method ?

Legend item text too long

Similar Messages

Maybe you are looking for