I am having trouble deleting Rimalbumartdaemo - causing mac to run slow

I am having trouble deleting rimalbumartdaemo - which is causing Mac to run slow

Here are a couple of things:
Frame 0: the pane properties are saved with the file, so once they are set you never need to set them again. Delete the property node and associated constants.
Frame 1:
Shouldn't "Serial#" be a control (and an integer)? You do a complex song and dance to add leading zeroes. Simply format your serial number with format "%04d"
Shouldn't "Operator" be a control?
Frame 2: That loop needs a small wait statement. Since STOP is always true when the loop ends, the later case structure seems unneeded.
Frame 3:
the STOP function seems unneeded. the VI will stop anyway since there is no code left.
never use default tunnels for references.
All your error outputs are "disconnected" and write to the same indicator. Mist likely you'll loose intermediary errors.
Overall, you should use a state machine architecture instead of sequences. It will be much more flexible and will take even less diagram space. The indicators can be outside the state case, so all states can write to them. No locals needed.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Yosemite causing mac to run slow online???? why???

    i installed yosemite and it doesn't read my ex drive could this be why my safari runs slow now?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station.

    I am having trouble getting my My Mac Book Pro 15" Retina to wake up with an Apple Bluetooth Keyboard and Mouse while Docked in a Hengedock vertical docking station. The Keyboard and mouse work great with the laptop lid open but when closed in the docking station the bluetooth signal does not seem to transmit.  Is there a setting that can be changed to allow an Bluetooth keyboard and mouse to wake the computer while docked?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Having trouble deleting e mails

    Am having trouble deleting e mails with hourglass showing and nothing happening.

    Hi sookeysox,
    It sounds like you’re running into an issue deleting messages in Mail on your Mac mini. If you haven’t already, try adjusting the Mail preferences as suggested in the article linked below.
    Mail (Mountain Lion): If deleted messages don’t go in the Trash
    Also, you can find additional information and troubleshooting tips about deleting messages here:
    Mail (Mountain Lion): Delete messages
    So long,
    -Jason

  • I can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

    can not pair my itouch with my mac book pro version 10.6.6 .. it seems that maybe my itouch is having trouble connecting as my mac seems to pair, then waits for my itouch and it never works. please help!!

    I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
    Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
    For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
    Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
    If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
    Click Add, then you can close System Preferences.
    There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

  • I am haveing trouble signing in cause it keeps telling me to connect to the internet even tho i am connected to the internet

    i am having trouble signing in cause it keeps telling me to connect to the internet even tho i am connected to the internet

    Please see if this helps:
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Thanks,
    Anwesha

  • There are text messages that I'm having trouble deleting.  With some of my text messages, I can swipe to the left and delete ... or press and hold, get more and delete to trash can icon. But there are some where neither will work. Can't delete. Help!

    There are text messages that I'm having trouble deleting.  With some of my text messages, I can swipe to the left and delete ... or press and hold, get more and delete to trash can icon. But there are some where neither will work. Can't delete. Help!

    But once again, I do not want to lose my other texts, app progress, and photos. I could sync the photos but i would still lose the app progress and texts. I would only restore if it was the only option left, but the other space, as already stated, isnt the main concern. The main concern is those 'deleted' texts. If they go, then a good size chunk of the other space goes. I know you CAN delete texts for good. It worked fine before. All i want to know is why its not working for me now, and how to fix it.
    I also know that when you delete texts on your iphone, they get marked for deletion, however they stay on your device (thats why they show up when you search for them.) then when you sync your device with itunes, the texts marked for deletion should disappear. When i synced they didnt disappear. Thats what i need an explanation/solution for. Why the texts marked for deletion didnt get fully deleted after the sync.

  • HT201077 I am having trouble deleting individual photos from my iPad on shared photo streaming.

    I am having trouble deleting individual photos on Shared Photo Streaming on my iPad 2. There is not a trash can or delete option. If I choose edit on the first page, and I try to delete, the next step is to cancel photo sharing, which I don't want to do.

    Welcome to the Apple Community.
    Youre trying to delete photos from someone else's shared photostream. You can only delete photos that belong to you.

  • I am having trouble deleting photos from iPad that we're imported from PC  how do I do this to free space on ipad

    I am having trouble deleting photos from iPad that we're ported from PC. Already deleted from PC but still showing up on iPad following sync

    Tap and hold your finger on the X
    You should get a message in some cases that it will delete your stored app data - say OK if you want to proceed
    The wiggle mode should stop with a press of the home button - not a hard reset
    Reset your phone and see if the behavior changes - there is no data loss - Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    (802)

  • I'm having trouble deleting mail. When I select all and delete it doesn't always work. Is there a glitch in this app?

    I'm having trouble deleting mail.  When I select all and delete it doen't always work.  Is there a glitch inthis app?

    Have you reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen? If that doesn't resolve this, you can try resetting all settings. Settings>General>Reset>Reset All Settings. You will not lose any data, but all device settings will have to be entered again.
    If that doesn't fix it, your next step might be to backup then erase all content and settings or restore the iPad to factory settings. See how if goes if you reset all settings first.

  • I have 81,934 items in my trash. Having trouble deleting it. Is it using valuable space?

    I have 81,934 items in my trash. Having trouble deleting it. Is it using valuable space?

    At first I didn't realize how long it would take to delete 81k items, so when I first tried months ago I had assumed it didn't work-because it didn't seem to be moving.  The setting was set to "secure delete".   I left the trash to delete securely for 12 hours and it is finally empty.  Embarrassing :-(  THANKS!!

  • Im having trouble with my i mac it freezes up an some times wont start normally it will jus display a gray and white fuzzy screen (any Help Out there)

    im having trouble with my i mac it freezes up an some times wont start normally it will jus display a gray and white fuzzy screen (any Help Out there)

    Hello there, DJ ROb E Rob.
    The following Knowledge Base article offers up some great recommendations for troubleshooting the gray screen at startup:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/ts2570
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • My mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be?

    my mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be? can it be a software issue with the wifi?
    also i noted that it has only been doing this since quite recently, before it was fine
    please help!

    First, back up all data immediately, as your boot drive might be failing.
    Step 1
    This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Reset the System Management Controller.
    Run Software Update. If there's a firmware update, install it.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the View menu or the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
    Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
    Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • My mac is running slow on my profile and it freezes. When I enter as a gust it is running fast

    My mac is running slow and when i go as guest it loads fast. Can somebody help me please?

    What Mac and OS?
    Try a repair in Recovery Mode AND do a SAFE BOOT MODE.
    Backup first, should be already.
    I would be careful using a system that may have directory errors.
    Create a new standard user account if the hard drive is sarfe to use and no errors.
    Then migrate to the new account or find what in yours is offending and cauing problems.
    Maybe from prior OS?
    Started happening with 10.9? upgraded over 10.8?
    Anytime a system freezes, STOP. Any hard or forced freeze, assume there is going to be need to repair and correct the hard drive directory.
    Doesn't sound like networking or internet - is it only mail and web browser you have had trouble?
    Then reset and clear the browser and use its safe launch mode.
    Problems with Mavericks and Mail -- I'd say look in Mavericks forums.

  • My Mac us running slow and i dont know have to investigate why?

    HI Everyone my Mac is running slow.... i have used tools to clean up unwanted files. Looked at how much my files are takng up i have 41.1GB left out of 319G Mac Hardrive could this be the reason?
    Do i need to move all my movies and audi files to a external hard drive will this speed up my mac?
    Thanks Cam

    You have plenty of disk space.
    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Otherwise, take the steps below when you notice the slowdown.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Maybe you are looking for