I am having trouble printing to an Epson XP600. It is a new printer and it has been replaced because we thought it was the printer. Basically, when I print from Excel, only color will print.
I am having trouble printing to an Epson XP600. We have replaced the printer and we are still having the same problem. When I try to print from Excel, only the color prints. Any suggestions?
Has anyone else had issues not being able to print black (such as a document)? My photos print great, but when I try to print a simple black-ink document, it won't work. Any suggestions?
Similar Messages
-
The Color doesn´t recognize the clips´time when I send from FCP to COLOR
I have a big problem. When I send from FCP to Color does not recognize the mounting clips. In each plane is everything and not the s 2 or 4 seconds it had in the assembly of the FCP.
I have worked with Color more times and have not had that problem.
Anyone can help me?. Can it be the codecs, the times of the FCP, the settings of COLOR?
Could you help me, please ?subpaper clips.
What is a "subpaper clip"?
By the way, all this nonsense about COLOR only supporting one layer of video... where is this coming from? This is utterly untrue... I am thinking of Stevie Wonder's song that states that when people believe in things they don't understand, that's superstition.
Rather than try to explain all the things that COLOR cannot do, maybe it would be easier to lay out the basic concept of what should be sent.
Very fundamentally, COLOR is a sequential-file (.dpx) color correction or grading application that has been modified to work with a few Quicktime codecs, and can accept a single sequence of independent media (discrete clips) from Final Cut. That sequence can have many layers, but it cannot have any nested sequences, and there still are a number of editing strategies within Final Cut that can be proxied, albeit inexactly, but occasionally not at all.
The safest sequence to send to COLOR from Final Cut consists of independent Quicktime Clips, all of the same resolution, codec, and frame rate, which should match the sequence settings of the Final Cut project. There is a naive assumption that anything that can be done in Final Cut can be replicated in COLOR and returned intact. This is absolutely untrue, and the evidence of that is everywhere in this, and other forums.
In this particular instance, "zotero"'s problem, while lamentable, is of his own creation by ignoring or proceeding without any preparation or investigation, and assuming that every editor's concept of what passes for the creative process has been anticipated and compensated for by the application developers.
To mark them manually now when already I have the definitive assembly is a labor of many hours.
Unfortunately, that may be your fate. Alternatively, you may consider the use of a "Media Manage" operation which will re-organize the independency of the source media. The Media Manager is covered extensively in the Final Cut manual. I'd advise doing a lot of back-ups before proceeding with anything else at this point, because it really looks like there is going to be a lot of trial-and-error in the near future... mostly error. Good luck with it all.
jPo -
Dark prints using CS5 & Epson R2400 ongoing problem, now new PC and magenta cast
Have tried every combination of set up in trying to solve problem. Had One Eye (now defunct lamp) various experts etc etc but compensated for dark prints by having screen lightened to bizarre point. Now having a new PC am faced with massive magenta cast. I really don't want to buy a new printer but have had the dark print problem since I got it. Have spoken to Adobe and Epson at length but eventually washed their hands. I feel it is something to do within the computer set up or Photoshop - don't think its printer problem. All drivers updated regularly. Thought it could be monitor problem but don't really think this is the case.
Any ideas welcome as I think I have tried everything. Use Windows 7.
Am retired and not very technically minded! Serious amateur photographer.I have an Epson 1280 printer, and I have the same problem with prints. Part of the problem are the different color profiles in the monitor and the printer. The other problem to deal with is the type of photo paper used. While looking at web sites, I found that the ICC Color Profiles for the printer are on the install disc and are not automatically installed. One of the links describes which folder to install the profiles on both Mac & Windows computers.
As station_two wrote, calibrate your monitor first.
Below is a link about calibrating.
http://dpexperience.com/2009/12/18/calibrating-your-monitor-to-your-printer/
The next link is for printer tips
http://www.normankoren.com/printers.html#Printer_tips
And some more here
http://www.digitaldog.net/tips/
I do not have an exact answer for you because I have not figured it out myself, but here is what I have been doing on my prints. I might recommend that you work on a copy of the original.
In the Layer floating window, create a New Adjustment Layer by clicking on the half black/half white circle, and choose Hue/Saturation or Color Balance or Selective Color. Because the prints come out too red, you want to increase the green sliders, which is the opposite of red, and/or decrease the red. (Layer>New Adjustment Layer>Color Balance) is another way to do it.
Under the menu item Image>Adjust Levels. Move the center triangle at the bottom to lighten the mid-range, or use the center dialog box and change it to 1.20 or 1.30, for example.
Now press Print with Preview (but you really are not going to print).
When the dialog box comes up, make sure the Print Space: dropdown is set to Epson Paper or whatever you are using.
I have been using Relative Colorimetric. Press Print. Another dialog box will come up. At the bottom will be a button for Preview, which will generate a preview of what the photo will look like if printed.
Keep going back to the original and double click on the Adjustment Layer and adjusting it until the Print Preview looks ok.
Be sure when you actually print that the paper and color settings in the Epson dialog box match your settings in Photoshop. There is a dropdown that has Print Settings or Color. Often they don't match unless you print several photos in a row. I have found printing at the lower settings (less than 360 dpi) also messes up the color.
It is not an excellent solution, but until I can figure out more, I am in the same boat as you.
I'd suggest saving the lightening and color adjustments as two different Actions. -
Maskme has been deleted. Why? It was the only useful program I needed
I use an addon called Maskme which fills in fake email addresses tied to the real email. When one wants to stop the resultant spam, all he has to do is to block the email. Mozilla recommends another program that is a password program and not what I use and it doesn't mask the emails.
What happened? A good little add on which I used a lot.
If it can't be reinstated, I will have to finally go back to another browser, reluctantly, because that is one of the programs I use a lot, as well as one that uses activeX (which only works on Explorer). Seems like Mozilla is slowly reducing my choices!Look at the first entry on this search page;
https://addons.mozilla.org/en-US/firefox/search/?q=Maskme -
i was listening to the radio on i tunes and suddenly the itunes page dissapeared and a small window appeared in the upper left hand side of the desktop. i can control only my music via this window which has a search fwd and back arrow and a play and pause button. there is also a volumn set to full. i can control my music by the volumn control at the top rt of all pages. i want to access the itunes store and the radio, but cannot (can access the itunes store by googleing it.
wt heck?Click the green button in the corner of this iTunes mini player to return to regular iTunes window.
-
Long story short the iPhone heated up and since then has random grey lines down the middle. It "controls itself" or won't work whenever those lines appear. Apple asked for the serial number however it says it has been replaced. I bought it online so i'm not too sure what to do now. will apple still repair it?
You can ask, but most likely answer is Apple will not repair it. That message
means the iPhone has been replaced and should have been turned back into
Apple, but it was resold instead. If you bought from eBay or other service that
offers buyer protection, start a claim for a refund unless the iPhone was described
as replaced. -
Only the blue color will print
only the blue color will print cartridge has been replaced heads have been cleaned
Hello there! Welcome to the forums @handyhelpful
I saw your post about how only the blue/cyan color is printing out from your Deskjet F2120. Please check out the guide below and try the troubleshooting steps to see if the other colors will print again.
I hope this helps!
Missing, Faded, or Dull Colors
If the troubleshooting does not help at all, I would lastly suggest technical support.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
I’m using windows 7 and working in office 2010. I have installed iCloud and I can’t print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.
GeoffI had a similiar problem, with my multiple devices. I open iTunes and when all devices were connected I went to the info section on each device. Under info I checked the sync calandars. Under that I click all calanders. I then did the apply in low right. I then did the sync function and it fixed it for me. You have to do this for each device.
I also checked the device (ipad,Iphone) themselves and change the calander selection to NO Catagory. Hope this helps. -
I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?
Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy -
I'm having trouble with my Apple ID. I changed my email account, and recently (a month ago) and since I switched is requested every time I open any app to Apple ID password to the old email. How can I solve this? Could it be that my iPhone 4S is in sync with my Ipod???
If you updated your existing account then try logging out of it on the iPhone by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPhone. If you created a new account then any content that you purchased/downloaded via the old account will remain tied to that old account, and only that old account can download updates to its apps.
-
All of a sudden, my ipod touch will only recognize/play purchased items. I then have to completely reset the ipod and re-sync. I've had to do this 6 times, and support has been no help.
So you also rebooted your router correct? Does the iPod still connect okay to other networks?
B-rock -
Im having trouble syncing google calendar. If I add event to my calendar using my ipad mini, it won't appear on my google calendar when Im viewing it using my computer or phone. However, if I post an event using my phone or computer, it appears on ipad mini, why is this and how do I fix it to where everything syncs both ways?
let me ellaborate on this part:
"b) perhaps I've got some kind of virus on mine?"
I mean, " perhaps I've got some kind of virus on mine, and I've passed it on to hers?" -
I am having trouble updating iTunes 10.7- it downloads about 70% then stops and says error. What can I do to update??
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
Having trouble installing LG slim portable DVD player to my new MacBook Air?
Having trouble installing LG slim portable DVD player to my new MacBook Air?
No installation required. Just plug it in to a USB port and it should work. If it doesn't then either the drive is no good or the USB port has failed.
The DVD drive will not show up on the desktop or in Finder unless you have a CD or DVD disc inserted in it. It will show in Disk Utility when it is connected to one of the USB ports.
Could also be your Air is not supplying enough power to it from just one USB port. In that case you would need a Y USB cable that connects to 2 USB ports at the same time to supply the correct amount of power to the drive. -
i am having trouble with the email that is confirming my security questions, it says it has sent it to my gmail but i have checked the email account and nothing has been sent, i have waited 24 hours for it and still nothing.
Hi Cara154,
If you are having issues receiving the email verification for your security questions, you may find the following article helpful:
When you provide a rescue email address during Apple ID creation, you will receive an email from Apple to verify that the email address provided is accurate. If you don't see an email from Apple asking you to verify your rescue email address, you may want to check your SPAM folder. If you still haven't received the email from Apple, you can sign in to My Apple ID (appleid.apple.com) to resend your rescue email address. To resend your verification email, click on Password & Security. Then, click the Resend link located in the Rescue Email Address section.
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
- Brenden
Maybe you are looking for
-
When creating a trace file, is it possible to specify a node where the trace file will be created? If so, please give example? thank u
-
Archiving Calendar items - Outlook
Hello, Very frustrated here, and hoping the community can help me. I have Outlook 2011 on my Macbook Air on Mavericks (not that the OS matters). I'm trying to clean up space on my Exchange (work) account, as it's nearly full. Most of the space is
-
Preparing Balance sheet by using profit centers only for BS Items
Dear Experts, could you please help me out regarding the following issue. business area wise we can get the balance sheet but i want to know is there any possibility to get the BS by using profit centers only for BS Items or can we assign biasness ar
-
Infoobject 0doc_number not activating
Hi guru's could any one tell me how to activate 0doc_number , which is there in business content,i hv been treing to active in diff ways , but still i could not , plz tell me what could be the problem, how i can activate it thank u hari
-
BI content for IS-U: 0UC_DEVICE mapped to EQUNR?
Hi all, We're using the BI content data flow to load Device data from source tables EGERH and EGERS to the InfoObject 0UC_DEVICE. In this flow, the key field of both tables (EQUNR) is mapped to 0UC_DEVICE. The InfoObject 0EQUIPMENT and accompanying B