I am loging in SAP. Initial screen come where it display User Menu and Sap

Dear All,
When i am loging in SAP. Initial screen come where it display User Menu and Sap Menu, but User menu is in active not showing but T code are executing then what object i have missed.
can u help me?
Thanks,
Regards,
Sachin

Hi Sachin,
It doesn't care if you're using SAP_ALL or any of those profile. That is not relevant. I had that case a few days ago, I'm not using any of those profiles and I made it work with help of one post.
If you put the transactions in the tab "Menu" of the role in the PFCG, and if you activate parameters I mentioned in a prior post, then you should see the Menu.
Tables SSM_CUST and USERS_SSM. The first is global and the other is user-especific.
The link in one of the first post of this thread hace all the info.
That should work, that worked in my case.
What values the parameters have on those tables? The more the info the better.
Updating the parameters on those tables should help. If still doesn't work then you should check another parameter using transaction RZ10 or report RSPARAM.
If my info solves your problem, points are appreciated, if not, we will try...
Jose

Similar Messages

Activate User Menu in SAP logon screen

1. Configure individual specific SAP user
Enter transaction code SM30 (Maintain Table Views) in your SAP command field and maintain USERS_SSM table. You would notice that no data maintained in this table during initial access. To maintain entries, click u2018New Entriesu2019 button. Enter the individual username on the User Name field. To enable user menu and SAP menu, tick the appropriate checkboxes. To disable, untick the chekcboxes.
2. Configure all SAP user
Enter transaction code SM30 (Maintain Table Views) in your SAP command field and maintain SSM_CUST table. To enable te user menu for all SAP users set ALL_USER_MENUS_OFF = No. To disable it, set ALL_USER_MENUS_OFF = Yes.
To enable the SAP Menu set SAP_MENU_OFF = No, to disable it set SAP_MENU_OFF = Yes.

It is not a question, it is a tarot card
@ Arindam Banerjee: Feel free to post you findings if they are interesting or "common mistakes", but please only use this thread. Ideally this is stuff for the wiki - if not already in help.sap.com or the system itself...
Specifically in this case, user menus is no easy task in the wild and is very dependent on how you build your roles.
Cheers,
Julius

How to add z transaction to area menu fo sap initial screen

Hi,
we have created 'z transaction'. how to attach it in area menu of sap initial screen.
we need to attach it to logistics>financial accounting> clients.
could you please help me .

Hi,
There is no need of creating any t-code for a area menu. The area menu name given by is the t-code to acces the area menu.
SO create the area enu with the name which you want to create the t-code.
To create a t-code to a standard area menu just go to se43 and copy the standard area menu to your z area menu (z area menu name should be the t-code you want to create.)
If you know the transaction code of that clients then goto se43 and give that transaction code and then copy to z_transaction code.
If you dont kow the transaction code of that clients then open clients throuch the path logictics->fiancial accounting->clients then look at the status to find the t-code.
Thanks
Kiran.
Edited by: kiran Pasala on Feb 28, 2008 8:39 AM

I tried to rent a film on my MacBook but it comes up with, In order to rent, you need to authorise this computer. To authorise this computer, select "Authorise Computer..." from the store menu. Where is the store menu and how do I sort it?

I tried to rent a film on my MacBook but it comes up with, In order to rent, you need to authorise this computer. To authorise this computer, select "Authorise Computer..." from the store menu.
Where is the Store menu and how do I authorise my computer?
Please help.
Thank you.

Move the cursor to the very top of the computer's screen, click on Store in the menu bar, and choose Authorize this Computer.
(115518)

Trying to install Leopard on my iMac (G5). Got to the screen that asks for the user name and password and it won't take it. How do I get out of this and resume the software install?

Trying to install Leopard on my iMac (G5). Got to the screen that asks for the user name and password and it won't take it. How do I get out of this and resume the software install?

Help here > Mac OS X: Changing or resetting an account password

Unable to access user DDIC and SAP*

+Hi GURUS,+
+I installed solutionmanager 4.0 and i loggen in the system(000) with DDIC user and check the TCODE SICK.+
++When i restarted the server it was not allow me to login awith user DDIC and SAP in 000 client.++*
+It's giving error message:+
+Password log on nolonger possible too many times failed attempts.+
++Could you please help me out is there any way to set DDIC and SAP from windows level(i mean sap inst directry..usr/sap/<sid>/sys/profile)*
Regards
JAn

Hi,
Unlock it at Database level
UPDATE usr02 SET uflag = 0 WHERE bname = "SAP*" AND mandt = <client number>
Or
Run the sql query at sql prompt and then login to sap with sap* and password "pass".
SQL> delete from usr02 where mandt=<your login client> and banme='SAP*';
Rakesh

Instead of the transaction the SAP initial screen appears...

Hi all.
Does somebody know why sometimes when I call a transaction through an ITS server , just appears the initial screen of the SAP system?
For example:
I execute this transaction (IW29) through the SAP ITS server:
http://sapits1.esri.com/scripts/wgate/webgui/!?~transaction=IW29
but the result doesnt show me the transaction, just the initial screen of the SAP system
I remember happened to me before but I dont remember what was the solution.
Thank you very much,
Jessica.

Hi Tobias,
Sorry for the delay...actually I dont find anything in the trace files... I checked all the log files and couldnt see anything... did you mean any trace file in particular?
I wonder if the problem has to do with the fact that I have installed 2 ITS instances in one server...the agate.exe processes consume lots of memory in the server...and I read in OSS note that you could experiment problems with more than one ITS 6.20 instance in one server.
Any ideas?
Thanks.

SAP initial screen changed

Hello SAP Experts!!!
In our company, i have created some roles and assigned them to the consultants. Till yesterday the initial screen for all the users assigned to that role was SAP Easy Access
Menu (S000). But it changed to project builder now. I want to change that to previous one. How can i do that in that particular role?
Thanks & Regards
Vanitha
Edited by: Vanitha badampudi on Feb 17, 2009 7:16 AM

Check this out
o   Change SAP menu
     -   The SAP menu entry point is specified in the transaction SSM2.
         If no setting is made, the standard entry point (area menu S000)
         is used.
User-specific settings
o   The administrator can activate or deactivate menus for individual
     users.
     -   If there is a user setting it is used, if the menu exists.
         Global settings are then ignored.
     -   To make user settings, enter or change records in the table
         USERS_SSM in the View maintenance transaction SM30). You can
         then specify whether the user menu or the SAP menu are to be
         displayed for a user.
@Rosa Project builder is just a transaction code CJ20N
May be it helps
Regards,
Subhash

I want to install the new version of Adobe Flash on my Mac. I download it and when I go to install a security screen comes up with my user name. It asks for my password and no matter what I put it won't recognize the password and let me install the player

I am trying to install the new version of Adobe Player on my Mac. I download it but can't install it. When I go to install it I get a security screen with my user ID and it asks for my password. I have reset my password but still can't get it to be accepted so I can't download the player

Hello,
Please see What userid & password do I need to install Flash Player?.
Maria

User Menu Like SAP menu

Hello Guys,
I have to create a z Menu like SAP menu which invoke after some z t code.
In this menu I have to add all z t code module wise which will work from there itself. like.
Data Menu
        MM module
              zmmp1 : Bin Card report
        PP Module
             zppp1 : Daily production report.
like that Please provide me the help
Thanks
Swati.....

Hi,
I think you should design your menu in menu painter ie transaction code se41 and give the module wise transaction codes as the options on the menu created , when user clicks on the menu an event is triggere and sy-ucomm contains the code of the option clicked. you can then write impementation as call transaction a particular transaction code depending on the option clicked.
Regards,
Sunmit

ESS user ids and SAP Users ids accountability

Dear All,
Here at client place we some 50 professional user licenses for SAP r/3 and 200 ESS licenses. So here can we split same licenses into 150 ESS and 50 MSS, as well as when i am creating a system user at backend would be accountable against SAP professional licenses or its included in ESS licenses.
Regards,
Rajasekar

no replys

How to go to SAP initial screen ?

In my report in Perform , I have an error message.
After executing the program, after the error message is displayed and the user hits the ENTER key, the system takes the user back to the <b>main SAP menu</b>.
How to do this coding?

Hi Sam
You can give some information message and then write the statement 'LEAVE PROGRAM' OR
You can just write 'Leave to Screen 0'
Thanks

I open my MacBook Pro lid, the screen comes on momentarily, then goes dark, and I can't do anything

OS X 10.6..08
MacBookPro6.2
I never reboot. I have a lot of windoes open. Every week or two I'll open the lid to get to work and the display comes on then goes off and I can't do anything. The keyboard backlight is on. If I close the lid the white pilot light on the front right edge is on. I have not been able to guess a key combination to get it back. The only thing I found is to press and hold the power key to force a reboot. When it comes back up it usually sends a trouble report.

MikeGMIT wrote:
The report is incomprehensible. Is it saved somewhere? If so I can grab it and post it here.
Inside your Utilites you will see the Console.app. Click on it. Reports will be there.
Yes I have tried a short press of the power button. I've opened and closed and done short presses and waited several minutes for something to happen afer each action.
Since I can't see the screen I can't close/quit applications.
It opens closes, sleeps wakes just fine several times a day, and for days in a row. Then one day it exhibits this bad behavior.
Thanks for asking some questions and offering suggestions!!

Returning to initial screen with earlier values from USER EXIT

Dear All,
I'm creating message invoking code in one of the user exit in the FB60 Transaction. When the user saves the invoice, as per code, an error message is displayed if the invoice is for a particular order. but after showing the message , the transaction itself is getting terminated. The type of the message is 'I'.
We require that after showing the message, the user should get back to the earlier screen with earlier values of all fields except ORDER number.
In short it should lead us to change the order number and nothing else.
Please help as it is really an urgent issue.
regards
Ajay.

hi ajay,
i do not know the complexity of your user exit,
maybe you could try using 'SET CURSOR FIELD <fieldname>.'
but SET CURSOR would only work for types C,N,T .
try it out and transfer me with your knowledge if you find another way out
cheers,
Aditya.

Issue with user mapping and SAP reference system

Hello Gurus,
I have this strange system behaviour when preparing my system for single sign-on using user mapping.
Case 1.
In the user management property category, I have the following defined.
Authentication Ticket Type - SAP Logon Ticket
Logon Method - UIDPW
User Mapping Fields -
User Mapping Type - admin, user
In the alias editor, I defined the default alias as SAP_PRD
Result= when I go to identity management to assign the reference system (the default alias - SAP_PRD)...I do not see the system alias there.
Case 2:
In the user management property category, I have the following defined
Authentication Ticket Type - SAP Logon Ticket
Logon Method - SAPLOGONTICKET
User Mapping Fields -
User Mapping Type - admin, user
In the alias editor, I defined the default alias as SAP_DEV
Result, when I go to the identity management to assign the refernce system (the default alias - SAP_DEV), I see it there.
What might be my issue? Does it mean I can't assign SAP reference if I am using UIDPW as logon method?
Please help me.

Hi Mahesh,
Thanks for the feedback. I am relatively new to EP...so please I won't mind if you can guide me on how to go about this.
This is what I did...
I chose System Administration > Permissions
In the PCD, I located my system with the alias, SAP_PRD
It opened up the permission assignment area.
Now I have these permissions set
Administrator - Full Control
Administrators - Full control
com.sap.caf.eu.gp.roles.superuser - Full control
Everyone (built in group) - Full control
Everyone (Everyone role)- Full control
super_admin_role - Owner
For all the above End User box is checked.
I can't find anyone end user group .
Once I pick UIDPW, the alias disapperars from the reference system list.
Please help.

I am loging in SAP. Initial screen come where it display User Menu and Sap

Similar Messages

Maybe you are looking for