Returning to initial screen with earlier values from USER EXIT

Dear All,
I'm creating message invoking code in one of the user exit in the FB60 Transaction. When the user saves the invoice, as per code, an error message is displayed if the invoice is for a particular order. but after showing the message , the transaction itself is getting terminated. The type of the message is 'I'.
We require that after showing the message, the user should get back to the earlier screen with earlier values of all fields except ORDER number.
In short it should lead us to change the order number and nothing else.
Please help as it is really an urgent issue.
regards
Ajay.

hi ajay,
i do not know the complexity of your user exit,
maybe you could try using 'SET CURSOR FIELD <fieldname>.'
but SET CURSOR would only work for types C,N,T .
try it out and transfer me with your knowledge if you find another way out
cheers,
Aditya.

Similar Messages

  • I am loging in SAP. Initial screen come where it display User Menu and Sap

    Dear All,
    When i am loging in SAP. Initial screen come where it display User Menu and Sap Menu, but User menu is in active not showing but T code are executing then what object i have missed.
    can u help me?
    Thanks,
    Regards,
    Sachin

    Hi Sachin,
    It doesn't care if you're using SAP_ALL or any of those profile. That is not relevant. I had that case a few days ago, I'm not using any of those profiles and I made it work with help of one post.
    If you put the transactions in the tab "Menu" of the role in the PFCG, and if you activate parameters I mentioned in a prior post, then you should see the Menu.
    Tables SSM_CUST and USERS_SSM. The first is global and the other is user-especific.
    The link in one of the first post of this thread hace all the info.
    That should work, that worked in my case.
    What values the parameters have on those tables? The more the info the better.
    Updating the parameters on those tables should help. If still doesn't work then you should check another parameter using transaction RZ10 or report RSPARAM.
    If my info solves your problem, points are appreciated, if not, we will try...
    Jose

  • How to deploy a VO Bind variable to get value from user session....

    Hello everbody...
    A JSF Page has a table based on VO with two parameters. One of this parameters I will pass by operation ExecuteWithParams.
    but the other parameter I need to pass a value from User session.
    Is that possible? How would I do that? I´m using jdev10.1.3
    Thankyou...

    When you created a binding for executeWithParams in your pageDef, the action binding should have had NamedData elements for each of the parameters. These would have been assigned values from a variableIterator up in the executables section. The parameter that gets its value from user input should be left alone. For the parameter that gets its value from the user session, change the EL expression that defines its NDValue attribute so that it references the session information that you want to use. This can be a sessionScope variable that you set earlier in the session, as Frank suggests, a property of a managed bean in session scope, or some other variable.

  • Variable used in FOx formula should get value from user

    Hi Gurus,
    In my fox formula I want to multiply a keyfigure (say quantity) with a factor. For example if the factor is 10 then all records should get multiplied by 10.
    But the requirement is user shpuld be able to give the factor that should be multiplied. That is the l_factor used in the fox function should be a variable which gets value from user. I know we can give variables in filter and planning functions in IP. But can we give values in Fox formula.
    I would really appreciate the time and effort.
    Thanking you,
    Jerry Jerome

    Hello,
    May be you can try this solution.
    I think you have create a dummy character info-object(Z_Number) of same data type interget number.Create variable for Z_Number and restrict in filter(ZV_NUM).
    DATA Z_MAT TYPE 0Material.
    DATA Z_NUM TYPE Z_NUMBER.
    DATA Z_NUM_READ TYPE I.(Declate same as data type for Z_Number)
    Z_NUM = VARV(ZV_NUM).
    FORACH Z_MAT.
    Z_NUM_READ = Z_NUM.
    {Z_KF1,Z_MAT} = Z_NUM_READ * {Z_KF1,Z_MAT}.
    ENDFOR.

  • How to call custom screen from User exit?

    Hai,
    I have to call a custom screen from user exit include after the delivery save.
    Depends on the data in the delivery,
    if the data satisfies certain conditions I will call the screen otherwise no.
    Could any one please tell me how to do this?where to create screen & how to link it here?
    Regards,
    Bhaskar.

    Hi,
    Please check with the following Enhancements -
    V50PSTAT  - Delivery: Item Status Calculation 
    V50Q0001   - Delivery Monitor: User Exits for Filling Display Fields
    Rewards if it helps
    Regard
    Goutham

  • Table for Valuation Price from USER EXIT - Cost Estimation

    Hi All,
    Can you let us know from where the system picks the price for VALUATION PRICE from USER EXIT when we have following setting in valuation variant
    1.Valuation Price from USER EXIT
    2.Price from Purchasing Info Records
    3. Planned Price 1
    Sub Stratergy.
    1.Effective Price from Purchase Order
    2. Net Quotation Price
    3. Gross Quotation Price.
    Now when we execute CK11N for a material, the system displays a cost price as 316 Euro/ unit.
    But Standard price is 290 euros, info record price is 294 euros & planned price 304 euros.
    Our previous cost estimation ( period 1, current period is 5) was 316 euro/unit (which was not correct), so deleted the cost estimation with CKR1 and try to rerun the cost estimation to update the value (new price), but still the system is picking the old price.
    Can you let us know from where does(transaction code & table) the system is picking the old values.
    In CK11N Material valuation (Valuation tab) its showing as Valuation Price from USER EXIT.
    We have activated Material Ledger with price control "s"and we in ECC 6.0.
    Do suggest.

    Hi,
    Where & how can i find the exit.
    Do suggest.
    Regards,

  • Sending mail to external mailid from user exit EXIT_SAPLEBNF_005

    Hai ALL,
    iam facing problem with sending mail to external id from user exit exit_saplebnf_005 , this user exit for ROLE Determination of releasing of PO .
    in this user exit i passed a user name for this role from one z table.
    through workflow the mails are send to workplace of resposible person maintained in ztable.
    now user requirement is they want some intimation in their outlook for they got mail in workplace .
    can anybody help me.
    Thanks .
    sushmita.k

    they can either define automatic forwarding in their SAP office to external e-mail OR they can set their external e-mail as preferred method of communication and they should receive mail to their external mailbox assuming that sending to external mail is supported in your system (check with BASIS folks).

  • How does the production system take the benefit from user-exits.

    How does the production system take the benefit from user-exits.

    and it is not the production system that benefits. its the company and the people working with SAP that benefits from the user exits which allow SAP to be altered for the company specific situations.

  • IDoc from User Exit

    Hi,
    Can you please give some idea or some useful links for information on generating IDocs from User Exits.
    For example, while creating a Sales Order I need to trigger an IDoc with the document number, plant, partner functions, and netvalue to the PI system. Please give some inputs for the same.
    Regards,
    Renjith

    Make the settings for IDoc processing (partner profiles, ports, destination, etc) fill the IDoc structure and call function module master_idoc_distribute  
    Also have a look at documentation:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/78/21783151ce11d189570000e829fbbd/frameset.htm

  • How to pass values between user-exits?

    Hi,
    I have to use two user-exits for changing tolerance limit of POs. In one, I have to check for the condition and in another, I have to change tolerance limit.
    How to do it?
    Thanks in advance.
    Regards,
    Arun Mohan

    Hi Arun,
    Use EXPORT and IMPORT.
    Means EXPORT value from on exit and IMPORT the value from another exit.
    In One Exit :
    EXPORT (OBJ_TAB) TO MEMORY ID 'ABCD'.
    In Second Exit :
    IMPORT (OBJ_TAB) FROM MEMORY ID 'ABCD'.
    Lanka

  • Client proxy from user exit

    I am invoking a client proxy from user exit (user exit is invoked in update task). Is there any red flags I need to be aware of.
    Proxy takes a while to execute and till that time, My original document does not get updated.

    Hi Kris,
    If it gives u Timeout error then only data will not be posted and it will  be an issue.
    If data posted from proxy then check in SXMB_MONI in Ecc side.
    Regards,
    Phani

  • Call Transaction from Program by Skipping Initial Screen & Pass the Value

    Hi All,
    Can anybody help me to call a transaction from my program. I do not want to display the initial screen of the transaction but that TCODE should get opened by passing the values to the parameter of the initial screen.
    For Example, in my program I want to call 'SE38' and in that, my Program of Name 'ZTEST' should get opened. So I need to call Transaction SE38, but I donot want to display initial screen of that. Instead of that, I want to put the value of Program 'ZTEST' and thus my program should get opened.
    Sandip

    Hello Sandip,
    Since you have not made any references to Batch Processing, I shall tell you the normal way to do it. First look at the code below and execute it.
    set parameter id 'DTB' field 'VBAK'.
    call transaction 'SE16' and skip first screen.
    There are a few things that you need to keep in mind before you use this statement:
    1. All mandatory input fields of the initial dynpro must be filled completely and with the correct values by the SPA/GPA parameters.
    2. For the initial dynpro, in the Screen Painter the own dynpro number must not be specified as the next screen number. However, if the next screen can be reached from the first screen by just hitting the Enter key, this will work.
    The following will not work as you expect, because the next screen in the transaction cannot be reached by just hitting the Enter Key.
    set parameter id 'RID' field 'ZTEST'.
    call transaction 'SE38' and skip first screen.
    Regards,
    Anand Mandalika.
    Please reward points if this helps.

  • Help with getting values from request. Very Strange!!

    Hello,
    My very strange problem is the following.
    I have created three dynamic list boxes. When the user select
    the first list box, the second becomes populated with stuff
    from a database. The third becomes populated when the second
    is selected. Now, I have used hidden values in order for
    me to get the selected value from the first listbox. The
    following code is my first listbox:
    <SELECT NAME="resources" onChange="document.hiddenform.hiddenObject.value = this.option [this.selectedIndex].value; document.hiddenform.submit();">
    <OPTION VALUE =""> Resource</OPTION>
    <OPTION VALUE ="soil"> Soil </OPTION>
    <OPTION VALUE ="water"> Water </OPTION>
    <OPTION VALUE ="air"> Air </OPTION>
    <OPTION VALUE ="plants"> Plants </OPTION>
    <OPTION VALUE ="animals"> Animals </OPTION>
    </SELECT>
    I use the getRequest method to get the value of hiddenObject.
    At this time I am able to get the value of hiddenObject to populate
    the second list box.
    But, when the user selects an item from the second list box
    and the second form is also submitted,
    I lose the value of hiddenObject. Why is this??
    The code to populate my second listbox is the following:
    <SELECT NAME ="res_categories" onChange="document.hiddenform2.hiddenObject2.value = this.options[this.selectedIndex].value; document.hiddenform2.submit(); ">
    <OPTION VALUE ="" SELECTED> Category</OPTION>
    Here I access a result set to populate the list box.
    Please help!!

    Form parameters are request-scoped, hence the request.getParameter("hiddenObject"); call after the submission of the second form returns a null value because the hiddenObject parameter does not exist within the second request.
    A solution would be to add a hiddenObject field to your second form and alter the onChange event for res_categories to read
    document.hiddenform2.hiddenObject.value=document.1stvisibleformname.resources.option[document.1stvisibleformname.resources.selectedIndex].value;
    document.hiddenform2.hiddenObject2.value = this.options[this.selectedIndex].value;
    document.hiddenform2.submit();You will then come across a similar problem with your third drop-down if indeed you need to resubmit the form...
    A far better approach would be to create a session scoped bean, and a servlet to handle these requests. Then when the servlet is called, it would set the value of the bean property, thus making it available for this request, and all subsequent requests within the current session. This approach would eliminate the need for the clunky javascript, making your application far more stable.

  • Process to add  new field to Account screen and update value from R/3...

    We have CRM 7 and just wanted to ask what the process would be to add a new field to the Accounts screen. This field will be a read-only field and we'll source its value from R/3, based on some of the other data entered into the Accounts screen.
    What exactly is involved in this process?.
    I think I can use the new Application Enhancement Tool instead of EEWB to create the new field, but how does one identify which structure/table to change for say the 'Accounts' data, and, where does one place the code which populates this field, and, once the structure has been changed how do I physically add the field to the screen. I should be okay with reaching out to R/3 and populating the data, code-wise, but again wondered if there was anything inbuilt to do this, bearing in mind the closeness and constant access to R/3 from CRM.
    Any help would be much appreciated.
    Jason
    Edited by: Jason Stratham on Apr 14, 2010 1:11 PM

    Jason,
    If you use EEWB or AET,, there is nothing manual you have to do, the fields will be added to all related tables and structures plus UI too.
    May be sometimes you have to run the UI configration tool to add the field to the UI, again this is just a tool, there is not manual coding required.
    you can enter the value for the fields direclty via UI, BUT if it is a display only field, at the time of save, you have to write couple of line to populate this field ( see set_property( ) method in the context node ).
    Thats it...
    Regards, Sudeep..

  • How can I get the variable with the value from Thread Run method?

    We want to access a variable from the run method of a Thread externally in a class or in a method. Even though I make the variable as public /public static, I could get the value till the end of the run method only. After that scope of the variable gets lost resulting to null value in the called method/class..
    How can I get the variable with the value?
    This is sample code:
    public class SampleSynchronisation
         public static void main(String df[])
    sampleThread sathr= new sampleThread();
    sathr.start();
    System.out.println("This is the value from the run method "+sathr.x);
    // I should get Inside the run method::: But I get only Inside
    class sampleThread extends Thread
         public String x="Inside";
         public void run()
              x+="the run method";
    NB: if i write the variable in to a file I am able to read it from external method. This I dont want to do

    We want to access a variable from the run method of a
    Thread externally in a class or in a method. I presume you mean a member variable of the thread class and not a local variable inside the run() method.
    Even
    though I make the variable as public /public static, I
    could get the value till the end of the run method
    only. After that scope of the variable gets lost
    resulting to null value in the called method/class..
    I find it easier to implement the Runnable interface rather than extending a thread. This allows your class to extend another class (ie if you extend thread you can't extend something else, but if you implement Runnable you have the ability to inherit from something). Here's how I would write it:
    public class SampleSynchronisation
      public static void main(String[] args)
        SampleSynchronisation app = new SampleSynchronisation();
      public SampleSynchronisation()
        MyRunnable runner = new MyRunnable();
        new Thread(runner).start();
        // yield this thread so other thread gets a chance to start
        Thread.yield();
        System.out.println("runner's X = " + runner.getX());
      class MyRunnable implements Runnable
        String X = null;
        // this method called from the controlling thread
        public synchronized String getX()
          return X;
        public void run()
          System.out.println("Inside MyRunnable");
          X = "MyRunnable's data";
      } // end class MyRunnable
    } // end class SampleSynchronisation>
    public class SampleSynchronisation
    public static void main(String df[])
    sampleThread sathr= new sampleThread();
    sathr.start();
    System.out.println("This is the value from the run
    method "+sathr.x);
    // I should get Inside the run method::: But I get
    only Inside
    class sampleThread extends Thread
    public String x="Inside";
    public void run()
    x+="the run method";
    NB: if i write the variable in to a file I am able to
    read it from external method. This I dont want to do

Maybe you are looking for