I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis

I think you're asking 2 different questions.
The PID control toolset is for using PID loops for control; it's just software.
The DAQ card and scxi chassis are hardware. If you have the appropriate signal conditioning cards in your chassis to control/monitor your solenoid valve, then you can run a PID loop.
I believe the simple answer is: the PID control toolset is the best way to do control, but there are simple PID VI's (even on this website) that you can download and use for simple control.
Mark

Similar Messages

I have a visual C runtime error stopping my pse elements 10 running in win 8.1. I am not a techie so am looking for a very clear way to resolve teh issue without needing too much technical ability. Can anyone help?

I had been using my elements 10 for much of the day so do not know what I have done to upset it! I was starting up again and it began to load then offered me this line of script re a 'runtime error'. That means nothing to me except that it no longer works. I have had a peek on Google and see various suggested fixes from sources I don't know whether to trust. Also some fixes give a list of do's that to a non techie like me are not followable. Can anyone offer me some understandable guidance so I can get back to playing with my photos?

You'll need to ask in the Photoshop Elements forum whose members can better answer this.
Photoshop Elements
Also keep a brief summary in the subject line and use the main posting window to describe your issue in detail.
Subject: Visual C runtime error as an example.

My iPad screen is extremely damaged, I need to wipe iPad clean but can't see the screen. Can I control iPad settings through my pc/iTunes?

My iPad screen is extremely damaged, I need to wipe iPad clean but can't see the screen. Can I control iPad settings through my pc/iTunes?

You can try an alternative.
This is the quickest thing that came to mind, but if you want to wipe it with no care of the data on the device at all:
Place device in recovery mode (turn off device > hold home button + plug in to iTunes (WHILE HOLDING BUTTON)).
iTunes will give you an error saying it detected a device in recovery mode, you need to restore to use device. Restoring device is a factory reset. AKA a wipe of the device
article for recovery mode: http://support.apple.com/kb/ht4097

HT2508 My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB

My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB in?

AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

Have one WiFi signal into the apartment for my Air, and another wifi signal for my 5c phone plan. Both from the same provider. Expensive. Is there a way to 'combine' WiFi signals so I pay only for one, but can get on the Internet with my Air?

Roamingnome, thanks for your response. Although I have been a Bell (Canada) customer for my WiFi signal for years, the 5c and its necessary mobility plan, is very recent. Some years ago, Bell supplied its own ‘router’ for my computer, and claimed that it was possible to get their WiFi signal only with the router they supplied. When I recently received the 5c, I wondered if the plan it requires, which is within the much wider, overall Bell zone, could be used somehow to get my Air online - some sort of tethering? - that allows me to give up the Air WiFi service and router all together, but still get the Air connected. Here in Canada, Bell Mobility and other Bell services are very separate. Any suggestions appreciated.

Is there a way to split a Muse file so that 2 or 3 developers can work on the project?

I would like to know if using both Muse and Business Catalyst we can split the work so that 2 or 3 developers can work on the project? I know that we can use folders for each developer however by doing so it creates an index.html in each of the folders.
Has anyone been able to create an environment for multiple developers on the same project?

Hi Gaurav,
I appreciate the reply. The thread you provided is not quite what I was looking for. I have a site that I would like 2-3 Muse developers to work on. They would each get a piece of the site and we would somehow pull it together into one cohesive program. For example we have an association made up of 20 villages. One developer would work on the individual village pages, another on the overall structure of the association and a third work on the Amenities. Everyone would need to be working at the same time using MUSE. I don't think we want to be doing any development in BC.
Anyone else out there who is doing something similar?

I can't see the page to by any thing because it has change for the way it was to black backround making it hard fore me, i can't see the page to by any thing because it has change for the way it was to black backround making it hard fore me

i can't see the page to by anything because it has change from the way it was to a black backround making to hard to type the right info for payment detals

This is a user to user help forum only. You are not addressing Apple here.
My iPhone 4S, iPhone 5, and iPad 2 are running 6.1.3 with no such problem and the same with the overwhelming majority of iOS devices running 6.1.3.

I use a macbook pro retina. before i upgraded to maverick my windows stayed the way i put them. now after upgrade i have to resize every time i change the window. i use a 32in. monitor and use it full screen.

I use a macbook pro retina. I use a 32 in. monitor and use it full screen. I size the screen manually. Since i upgraded to maverick, I have to resize the screen each time I change windows.Before the upgrade the screen stayed where I put it.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I can't adjust the sound althought I did turn on and off t the side switch. No way can I adjust the sound and no sound one out too

I Am having problem just recently. The volume bar don't let me adjust t all and there is o sound moving out. Can someone please help me? I check the sound on ring tone, it does work...but not the others.

Resetting the PRAM worked for me.

I can't access the App Store without a credit card or gift card is their a way i can do it without those

I can't access the App Store without a credit card or gift card can i not use one

Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
More details of how:
http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/

Split PR/PO values to allow pass approval limit, how can we control this?

Is there a way to limit the number of approvals that can be done on PR / PO per hour / day / week (for the same account, position, category, item).
The purpose of this not to enable users to split the PR/PO values in multiple PR/PO to allow approval limit pass, that is, PR = $3000 will not be approved since it is more that the approval limit of finance manager whereas PR 1 = $1000, PR 2 = $ 1000, PR 3 = $ 1000 will pass.
How can we avoid this?

Thank you Martin for your reply.
In option 2 does this mean if I am a member of the help desk who has the privilege to edit the user, I will be able to go to users/manage and another users/manage2 for example. In users/manage, I can view all the fields on the user with no edit button. In users/manage2, I can view only the fields I am authorized to edit, and there is an edit button on this page?
I have never done this so I am trying to imagine what the interface would look like and what the data flow would be.
In option 3, I have never thought of this solution. But now I understand that this could be an option.
Thanks
Khanh
Edited by: Khanh on Nov 10, 2009 10:28 AM

How can I fix the remote control order of the chapters?

I am using the new 6.0 theme of Reflection Black--submenu Chapters. THis gives you two rows of chapters (which shows the looping movies and title of the chapter). I am importing the .mov slideshows in the order I want them accessed with the remote control of the TV (or DVD Player remote), but this is not the case. Instead, when clicking the right arrow on the remote control, the next chapter is not the one laid down in order, but another chapter. (From the first chapter, it skips to the second row, then back to first row, then back to second row.) Basically, the remote does not forward to the next chapter in the order they were imported.
Can anyone help? I have been told by Applecare that the map icons cannot be reordered. But starting a new iDVD project and importing in order does not work. I tried other themes and the ones with lists work and can even reorganize the order for you if you drag and change the position of the chapter!
Thanks

There seems to be some order in some themes, but this particular one has no order. Hoping also to hear of a solution. Applecare said to reinstall iDVD if I can't fix the problem with creating a new project, but I don't think this is the issue, since other themes work.

TS4006 Is there any way to find a lost/stolen iPhone's most recent location, or to track if the iPhone has been activated with another Apple ID?

The iPhone 5 was either lost or stolen, and it does not appear as online in the Find iPhone app. Can i access the last place it was online? And if i can't, is there any way to track my phone to see if the data was cleared and someone is using it with another Apple ID?

The last known location is displayed for up to 24 hours, then it is cleared until it goes back online, if ever. If the phone has been restored and reactived as a new device, or erased and set up with a different ID, it can no longer be tracked.

Can i control surface logic 9 with digi 002 mixer? on snow leopard 10.6.8

Hi I'm trying to connect my digi002 mixer to use it as a control surface with logic 9, is there anyway of doing this?
I have an RME Hammerfall DSP Multiface II, that I'm using as my main sound card, but would like to light it with the 002 and use the 002 converters as well, so that in total i get 16 channels I/O + if I could get control surface of logic with the 002 would be great.....
I heard about the Multi-Client CoreAudio Driver, but not 100% sure if and how it works to control surface logic with 002.
Anyone???
Help please....
Thx...
G

I assume you have working installer discs? If so here's a suggestion:
Clean Install of Snow Leopard
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
     1. Boot the computer using the Snow Leopard Installer Disc. Insert the disc into the
         optical drive and restart the computer. After the chime press and hold down the
         "C" key. Release the key when you see a small spinning gear appear below the
         dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, set the format type to Mac
         OS Extended (Journaled, if supported), then click on the Partition button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.

How to control system volume by moving mouse up and down using java

hi,
please give me suggestion that how to control the system volume by moving mouse up and down in java..
thanks,
prabhu selvakumar.

Prabhu_Selvakumar wrote:
Thank u for ur reply... i dont know wat is JNI interface... i have to read about that.... Unless you're a whiz-bang C/C++ coder, using this won't be easy or pretty. For my money, if I wanted to create a program that interacted closely with a specific OS, I'd use a more OS-specific programming language such as C# if I'm coding for Windoz.

I am looking to control a 4-way hydraulic solenoid valve. Do I need a PID control toolset, or can i control the system through my 16E4 daq card and scxi chasis

Similar Messages

Maybe you are looking for