I am not able to modify the text in pdf output file using pdf editor
Hi,
We have upgrade the xml 5.6.1 in server level. After upgrading this, we are not able to modify the pdf output file. Previously we used to modify text and delete text in pdf file which is generated by oracle Application. As of now we cann't upgrade higher version. Can you suggest what to do?.
Check the xdo configuration file option in the user guides. There should be options that allow / disallow modifying text specifically. If you are in EBS, you should be able to change the configuration file options from the XML Publisher Administrator UI.
Klaus
Similar Messages
-
I am not able to display the text conditionally
i am not able to display the text conditionally
Please check the below formula.
i am not able to print all the below text,the text is printing only one line and some is missing.
Please do the needful.
@(If(("@Endrdesc1."=="EWWC006"),"12 It is hereby understood and agreed that any work in connection with the delivery or cartage of goods other than by hand, handcart, cycle or bicycle is expressly excluded from the indemnity granted under this policy 97 It is hereby understood and agreed that any work away from shop or studio is expressly excluded from the indemnity granted under this policy.","")) -
My iTunes is not able to sync the iPhone 4. I'm using windows 7 32bit. At the first step it gets stuck refelcting backing up the phone then nothing happens for ages. I'm using the latest iTUnes version, does anyone have similar prob??? There are no error codes which appear and the iTUNES just gets hanged, is there a solution?
Remove the song in question from the sync list and see if the rectifies the problem.
If it does, then iTunes believes the song no longer exists on your drive and that will need to be corrected. -
Not able to modify the data for infotype 0008 using FM
Hi All ,
I have got a requirement for updating the infotype 0008 data using FM : HR_MAINTAIN_MASTER_DATA.
While trying to modify the wagetypes data which is of blank ..unable to upload the amount for that partcular field ..
For this am herewith the link of o/p :
http://i55.tinypic.com/28jfw2c.jpg for this am also posting the code...
Please suggest me furthur in what way i can upload..
SELECT * FROM pa0008 INTO TABLE itab_pa0008
FOR ALL ENTRIES IN itab
WHERE pernr = wa_data-pernr
AND begda = wa_data-begda_out
AND endda = wa_data-endda_out.
DESCRIBE TABLE itab_pa0008 LINES lin.
IF lin EQ 0.
c_action = 'INS'.
ELSE.
c_action = 'MOD'.
ENDIF.
LOOP AT itab INTO wa_itab WHERE pernr = wa_data-pernr.
CLEAR: wa_bapireturn, wa_bapireturn1, wa_hr_return.
REFRESH: it_pprop[],it_modified_keys[].
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-TRFAR'. "1
it_pprop-fval = wa_itab-trfar.
APPEND it_pprop.
CLEAR it_pprop.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-TRFGB'. "2
it_pprop-fval = wa_itab-trfgb.
APPEND it_pprop.
CLEAR it_pprop.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-TRFGR'. "3
it_pprop-fval = wa_itab-trfgr.
APPEND it_pprop.
CLEAR it_pprop.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-TRFST'. "4
it_pprop-fval = wa_itab-trfst.
APPEND it_pprop.
CLEAR it_pprop.
flag = flag + 1.
*****************************************************************************************************5
BREAK-POINT.
IF NOT wa_itab-lga1 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA01'.
it_pprop-fval = wa_itab-lga1.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet1.
ENDIF.
IF NOT wa_itab-bet1 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET01'.
it_pprop-fval = wa_itab-bet1.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************6
IF NOT wa_itab-lga2 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA02'.
it_pprop-fval = wa_itab-lga2.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet2 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET02'.
it_pprop-fval = wa_itab-bet2.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************7
IF NOT wa_itab-lga3 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA03'.
it_pprop-fval = wa_itab-lga3.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet3 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET03'.
it_pprop-fval = wa_itab-bet3.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************8
IF NOT wa_itab-lga4 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA04'.
it_pprop-fval = wa_itab-lga4.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet4 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET04'.
it_pprop-fval = wa_itab-bet4.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************9
IF NOT wa_itab-lga5 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA05'.
it_pprop-fval = wa_itab-lga5.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet5 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET05'.
it_pprop-fval = wa_itab-bet5.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************10
IF NOT wa_itab-lga6 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA06'.
it_pprop-fval = wa_itab-lga6.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet6 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET06'.
it_pprop-fval = wa_itab-bet6.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************11
IF NOT wa_itab-lga7 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA07'.
it_pprop-fval = wa_itab-lga7.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet7 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET07'.
it_pprop-fval = wa_itab-bet7.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************12
IF NOT wa_itab-lga8 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA08'.
it_pprop-fval = wa_itab-lga8.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet8 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET08'.
it_pprop-fval = wa_itab-bet8.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************13
IF NOT wa_itab-lga9 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA09'.
it_pprop-fval = wa_itab-lga9.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet9 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET09'.
it_pprop-fval = wa_itab-bet9.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************14
IF NOT wa_itab-lga10 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA010'.
it_pprop-fval = wa_itab-lga10.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
ENDIF.
IF NOT wa_itab-bet10 IS INITIAL.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET010'.
it_pprop-fval = wa_itab-bet10.
APPEND it_pprop.
CLEAR it_pprop.
ENDIF.
*******************************************************************************************************15
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA11'.
it_pprop-fval = wa_itab-lga11.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET11'.
it_pprop-fval = wa_itab-bet11.
APPEND it_pprop.
CLEAR it_pprop.
********************************************************************************************************16
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA12'.
it_pprop-fval = wa_itab-lga12.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET12'.
it_pprop-fval = wa_itab-bet12.
APPEND it_pprop.
CLEAR it_pprop.
********************************************************************************************************17
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA13'.
it_pprop-fval = wa_itab-lga13.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET13'.
it_pprop-fval = wa_itab-bet13.
APPEND it_pprop.
CLEAR it_pprop.
********************************************************************************************************18
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-LGA14'.
it_pprop-fval = wa_itab-lga14.
APPEND it_pprop.
CLEAR it_pprop.
bet1 = wa_itab-bet2.
it_pprop-infty = '0008'.
it_pprop-fname = 'P0008-BET14'.
it_pprop-fval = wa_itab-bet14.
APPEND it_pprop.
CLEAR it_pprop.
BREAK-POINT.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
number = wa_itab-pernr
IMPORTING
return = wa_bapireturn1.
BREAK-POINT.
IF c_action = 'INS'.
CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
EXPORTING
pernr = wa_itab-pernr
actio = 'INS'
tclas = 'A'
begda = wa_data-begda_out "'20110401'
endda = wa_data-endda_out "'99991231'
dialog_mode = '2'
luw_mode = '1'
IMPORTING
return = wa_bapireturn
return1 = wa_bapireturn1
hr_return = wa_hr_return
TABLES
proposed_values = it_pprop
modified_keys = it_modified_keys.
IF NOT wa_bapireturn IS INITIAL.
WRITE : / wa_bapireturn.
CLEAR : wa_itab , wa_bapireturn.
ENDIF.
ELSEIF c_action = 'MOD'.
CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
EXPORTING
infty = '0008'
pernr = wa_itab-pernr
actio = 'MOD'
begda = wa_data-begda_out "'20110401'
endda = wa_data-endda_out "'99991231'
record = p_record
recordnumber = wa_itab-SEQNR
operation = change
nocommit = nocommit
dialog_mode = '0'
IMPORTING
return = wa_bapireturn
return1 = wa_bapireturn1
hr_return = wa_hr_return
TABLES
proposed_values = it_pprop
modified_keys = it_modified_keys.
IF NOT wa_bapireturn IS INITIAL.
WRITE : / wa_bapireturn.
CLEAR : wa_itab , wa_bapireturn.
ENDIF.
ENDIF.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
EXPORTING
number = wa_itab-pernr
IMPORTING
return = wa_bapireturn1.
ENDLOOP.
ENDLOOP.Here is a sampe, and the logic you are using for wages goes in the internal table for wages (you already have the enqueue & dequeue so you don't have to worry about that, so you only have to add the BAPI_TRANSACTION_COMMIT):
CALL FUNCTION 'BAPI_BASICPAY_CHANGE'
EXPORTING
employeenumber = pa0008-pernr
subtype = pa0008-subty
objectid = pa0008-objps
lockindicator = pa0008-sprps
validitybegin = pa0008-begda
validityend = pa0008-endda
recordnumber = pa0008-seqnr
payscaletype = pa0008-trfar
payscalearea = pa0008-trfgb
payscalegroup = pa0008-trfgr
payscalelevel = pa0008-trfst
* NEXTINCREASE =
* LOCALALLOWLEVEL =
* PARTNERSHIP =
* CURRENCY =
* COMPARISONPAYSCLTYPE =
* COMPARISONPAYSCLAREA =
* COMPARISONPAYSCLGRP =
* COMPARISONPAYSCLLVL =
* COMPNEXTINCREASE =
* CAPACITYUTILLEVEL =
* HOURSWORKEDPERPERIOD =
* ANNUALSALARY =
* CASEGROUPCATALOG =
* CASEGROUP =
* CURRENCYANNUALSALARY =
* REASON =
* NOCOMMIT =
* importing
* return =
TABLES
wagetypes = wages.
Regards,
Ryan Crosby -
Not able to print the text symbol value
Hi All,
I am using BTE 1040 for email dunning. In this BTE, I have called my custom FM in which I have written a code such that an editor comes up with the predifined message which we can edit it after dispaying.
For example, my text is as below.
test1
test2
test3
&gv_sender_name&
test4.
Now in the above predefined message I have a text symbol &gv_sender_name& which holds the value. I have filled the baove text symbol with value.
But the when editor comes up with that above message, the same text is printed. The value in the text symbol is not printed. I have defined the variable gv_sender name in my custom fm and also in BTE. But still it didnot work.
I should the get the text as test1
test2
test3
xyz
test4
The above predefined text is created in Text module.
Can anyone help me out how to print the value of text symbol.?
Points rewarded for helpful answers...!!
Thanks and Regards,
Karthik Ganti.
Moderator message: Offering points is against the Forum RoE.
Message was edited by: Suhas SahaHi Klaus,
Please find my requirement.
I have created a text module with some text.
Let me say test1
test2
test3
&lv_user_name&
test4.
I am filling the above text symbol &lv_user_name& with some logic. Let me say that variable has value XYZ.
Now when I use that text module in the form layout. I should get the output as below.
Correct Output : test1
test2
test3
XYZ
test4.
But instead of above output, I am getting the below output which is wrong, because the value which is there in that variable should appear in the output.
test1
test2
test3
&lv_user_name&
test4
How to print that value in the output ?
Please let me know if you need any info on the above.
Thanks and Regards,
Karthik Ganti. -
Not able to edit existing text in a converted to Word PDF file.
I cannot edit text in a converted to word PDf file. I can only add text. Why? I am using Export PDF
Hi Mark,
Have you tried triple clicking on your document? Sometimes the conversion can come across as an image.
Let me know if that works! -
I am not able to close the popup screen which i created using module pool
Hi,
I had written the following code in my PBO of the screen
PROCESS BEFORE OUTPUT.
MODULE status_0300.
MODULE call_list_0300.
PROCESS AFTER INPUT.
MODULE exit AT EXIT-COMMAND.
MODULE USER_COMMAND_0300.
*& Module call_list_300 OUTPUT
MODULE call_list_0300 OUTPUT.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
SET PF-STATUS '300'.
SUPPRESS DIALOG.
PERFORM get_document_text.
ENDMODULE.
*& FORM get_document_text.
FORM get_document_text.
ENDFORM
when i execute... since the screen is directed to list processing, when i click the close button the popup window is not getting closed
what should i do to close the list processing screenIf your screen is popup screen than your PF-Status must be type of "Dialog Box".
Than you will get the buttons at the bottom part of your pop-up which will allow you to interact with your PAI.
Regards,
Naimesh Patel -
Not able to modify the number of horizontal divisional lines in chart
Hi,
I have inserted a chart using BI publisher. Currently there are 5 horizontal divisional lines and the y-axis values are divided accordingly. I want to change the number of horizontal divisional lines (maybe 7). I tried to use LocalRelationalData with RowKeyCount but it didn't work.
Thanks,
VijayHi,
I am facing the same issue for SC with multiple line items
Rejetced line items can not be edited by requetser on the other hand approved items are appearing for in editable mode
Any one managed to get solution for the same ??
Please let me know the solution then..
thanks
Regards
jayesh -
Not able to get the actual plan from trace file
Hi all
I have a Db package and want to get actual execution plan of all the statements in that pakcage it does provides the plan for System's statements but does not displays the plan for Sql statements
DB version 9.2.0 using the following sequence of insructions
set timing on
set serveroutput on
alter session set events '10046 trace name context forever ,level 12';
begin
run_service.collect_data(sysdate);
end;
alter session set sql_trace=false;
exit; ---exit from Sql
now look at the output
select distinct obj#,containerobj#,pflags,xpflags,mflags
from
sum$, suminline$ where sumobj#=obj# and inline#=:1
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.00 0.00 0 0 0 0
Fetch 1 0.00 0.00 1 1 0 0
total 3 0.00 0.00 1 1 0 0
Misses in library cache during parse: 0
Optimizer goal: CHOOSE
Parsing user id: SYS (recursive depth: 2)
Rows Row Source Operation
0 SORT UNIQUE
0 NESTED LOOPS
0 TABLE ACCESS BY INDEX ROWID SUMINLINE$
0 INDEX RANGE SCAN I_SUMINLINE$_2 (object id 1614116)
0 TABLE ACCESS BY INDEX ROWID SUM$
0 INDEX UNIQUE SCAN I_SUM$_1 (object id 319)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 1 0.00 0.00
SELECT SEQ_NUM, S_DATE, S_TIME, CSTATUS, G_SERVICE,
B_REFERENCE, V_REFERENCE, M_PRIORITY
FROM GL_HIST
ORDER BY S_DATE DESC, S_TIME DESC
call count cpu elapsed disk query current rows
Parse 1 0.01 0.01 0 0 0 0
Execute 2819 0.37 0.32 0 0 0 0
Fetch 2819 2.50 20.47 2786 20164 0 2819
total 5639 2.88 20.81 2786 20164 0 2819
Misses in library cache during parse: 1
Optimizer goal: CHOOSE
Parsing user id: 15550 (recursive depth: 1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 2786 0.05 18.19
latch free 4 0.04 0.06
UPDATE G_ORIG SET G_SERVICE = :B1
WHERE
SEQ_NUM = :B5 AND S_DATE = :B4 AND S_TIME = :B3 AND
C_STATUS = :B2 AND NVL(G_SERVICE, '+') <> NVL(:B1, '+')
call count cpu elapsed disk query current rows
Parse 1 0.00 0.03 0 0 0 0
Execute 3731 0.74 0.99 261 18712 119 54
Fetch 0 0.00 0.00 0 0 0 0
total 3732 0.74 1.02 261 18712 119 54
Misses in library cache during parse: 1
Optimizer goal: CHOOSE
Parsing user id: 15550 (recursive depth: 1)
Elapsed times include waiting on following events:
Event waited on Times Max. Wait Total Waited
---------------------------------------- Waited ---------- ------------
db file sequential read 261 0.01 0.19
latch free 9 0.01 0.04
COMMITRemove the line alter session set sql_trace=false and just exit/disconnect. The explain plain is contained in the STAT lines in the trace file and are only written when the cursor closes. If you turn off tracing before the cursor closes the STAT lines will not get written.
-
I have add-block+ extension also. I dont know it has any problem with streaming by media player.
I have add-block+ extension also. I dont know it has any problem with streaming by media player.
-
How to modify the contents of a configuration file using j2me
Hi,
I'm developing a Application in j2me wherein i need to overwrite the existing contents of the configuration file(settings.cfg) with the value's that i have entered thru the front end. I was able to open and read the contents of the configuration file as follow's
InputStream is = getClass().getResourceAsStream("/settings.cfg");
Now, i need to remove the existing and updte it with the new content, how do i do it.. Kindly please help me out..
ThanksDidn't you hear me the first time?
http://forum.java.sun.com/thread.jspa?threadID=701360&messageID=4068435#4068435 -
Not able to copy the tree node text in solaris, while easily done in window
Hi,
I m not able to copy the text present on the tree's node to terminal or other text editor in solaris. I m using <Shift><control> C and V comaand for the same but the text is not being copied and pasted on the text pad or the terminal window.
While the same is possible in windows OS using ctrl+c and ctrl+v command.
Please suggest the possible solution for the same, is there any property of the tree/OS needs to be set?Help About says I'm on 20.0.1
Up until last week, I was able to use the tab key when typing emails and other multi-line text boxes.
Suddenly the behavior of the tab key changed. This isn't the first time. It's been quite a while ago that the function of the tab key changed from indenting to moving around the page, then after some time it changed back to indenting.
Can we get this fixed and leave it alone, please?
I may give one of those add-ins a try, but my problem with add-ins is that they break when FF is patched or upgraded, then I'm left with out the solution they provide.
Can we just fix Firefox, please?
Thanks,
Frank
P.S. Another potential fix I came across suggested starting FF in safe mode to see if the problem goes away. It does not. It seems to be a change to FF that appeared after an update last week. On or just befor 24 Apr. -
Not able to edit the value options in LKM
Hi
I have recently upgraded to ODI 11g .
In that we are not able to edit the value options in LKM.
(i.e.. editor window is not appearing, not able to edit the text.
Please let me know the solution .
ThanksWe were using JDK1.6.0_29 and it was not supporting ODI 11.1.1.5, so we have uninstalled the JDK1.6.0_29 and reinstall the JDK1.6.0_11.This solves our issue.
Thanks a lot!! -
Not able to modify Guage( dials) in OBIEE 11G
After selecting Guage view(any view default or otherwise), I am not able to modify the properties for the same. If I Click on the edit Guage properties and make some changes and then click on ok, it throws a pop up at me saying ARE YOU SURE YOU WANT TO LEAVE THE PAGE.... and options 1) leave the page and 2) stay on the page.
Please help is this a bug in OBIEE 11g, is there a patch available to correct this?This is a bug in obiee 11.1.1.5 . Please apply the patch 12761355(Request a password from Oracle Support). It is not at all related to any browser.
Thanks,
Anil -
Version: you are editing the shared version of this page. Not able to edit the page
Hi,
I have a sharepoint 2010 publishing site, which i have version upgraded to Sharepoint 2013.
I have the below features already activated:
1.Activate office sharepoint publishing infrastructure feature at site collection level.
2. Activate office sharepoint publishing feature at site level.
Also, versioning is enabled in the pages - document library settings.
The page does not seem to be checked-out by anybody else, and I am trying to edit the page using the system account.
I am not able to modify the page, and the ribbon does not show up.
What am i missing?
ThanksThis is not an error message but simply letting you know you are making changes to a page that will affect everyone viewing
the page vs. a personal view.
See more at:
http://www.go4sharepoint.com/Forum/version-editing-shared-version-page-7439.aspx#sthash.P2ZfVOBm.dpuf
http://office.microsoft.com/en-us/windows-sharepoint-services-help/about-web-part-page-personal-and-shared-views-HA001160936.aspx
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin
Maybe you are looking for
-
My safari won't work unless I click a link?
Recently I used AdwareMedic to clean off adware that had made its way on my computer. Once it was cleaned, I restarted my computer to be safe. Since the restart, every time I open my Safari a page comes up that states, "Safari Can't Open the Page."
-
Here's what I have: an Airport Express and the BD370 Blu-Ray player, which I'd like to connect to the internet for Netflix streaming, but is not wireless. What are my options here? Do I have to purchase a new router with available ports? Any help wou
-
After updating my 4s to ios 6, I started hearing "crackling" and "popping" sounds during calls on my Jawbone icon. Has anyone else experience this?
-
Hello, In still working on these issues, when I turn on the Range Checker, and scroll thru the clip, I notice an "X" on the upper-right-hand side of the clip in the Viewer - what does this mean? Then, when I start color correcting w/the color correct
-
Any way to capture DOMAIN in system variable?
Any way to capture the DOMAIN in a system variable that can be used in WebI or Universe?