Not able to modify the number of horizontal divisional lines in chart

Hi,
I have inserted a chart using BI publisher. Currently there are 5 horizontal divisional lines and the y-axis values are divided accordingly. I want to change the number of horizontal divisional lines (maybe 7). I tried to use LocalRelationalData with RowKeyCount but it didn't work.
Thanks,
Vijay

Hi,
I am facing the same issue for SC with multiple line items
Rejetced line items can not be edited by requetser on the other hand approved items are appearing for in editable mode
Any one managed to get solution for the same ??
Please let me know the solution then..
thanks
Regards
jayesh

Similar Messages

I am not able to modify the text in pdf output file using pdf editor

Hi,
We have upgrade the xml 5.6.1 in server level. After upgrading this, we are not able to modify the pdf output file. Previously we used to modify text and delete text in pdf file which is generated by oracle Application. As of now we cann't upgrade higher version. Can you suggest what to do?.

Check the xdo configuration file option in the user guides. There should be options that allow / disallow modifying text specifically. If you are in EBS, you should be able to change the configuration file options from the XML Publisher Administrator UI.
Klaus

In the new iOS-7 Safari, has the "reader" function been changed to eliminate the option to modify font size (and hence to modify the number of words per line), or is it just that I can't find how to do that?

In the new iOS-7 Safari, has the "reader" function been changed to eliminate the option to modify font size (and hence to modify the number of words per line), or is it just that I can't find how to do that?

iOS 7
Seperate text size modification is no longer available in Safari Reafer.
Use Settings.
Settings >General > Text Size

Not able to modify the data for infotype 0008 using FM

Hi All ,
I have got a requirement for updating the infotype 0008 data using FM : HR_MAINTAIN_MASTER_DATA.
While trying to modify the wagetypes data which is of blank ..unable to upload the amount for that partcular field ..
For this am herewith the link of o/p :
http://i55.tinypic.com/28jfw2c.jpg for this am also posting the code...
Please suggest me furthur in what way i can upload..
      SELECT * FROM pa0008 INTO TABLE itab_pa0008
FOR ALL ENTRIES IN itab
    WHERE pernr = wa_data-pernr
    AND begda = wa_data-begda_out
    AND endda = wa_data-endda_out.
    DESCRIBE TABLE itab_pa0008 LINES lin.
    IF lin EQ 0.
      c_action = 'INS'.
    ELSE.
      c_action = 'MOD'.
    ENDIF.
    LOOP AT itab INTO wa_itab WHERE pernr = wa_data-pernr.
      CLEAR: wa_bapireturn, wa_bapireturn1, wa_hr_return.
      REFRESH: it_pprop[],it_modified_keys[].
      it_pprop-infty = '0008'.
      it_pprop-fname = 'P0008-TRFAR'.                 "1
      it_pprop-fval = wa_itab-trfar.
      APPEND it_pprop.
      CLEAR it_pprop.
      it_pprop-infty = '0008'.
      it_pprop-fname = 'P0008-TRFGB'.                 "2
      it_pprop-fval = wa_itab-trfgb.
      APPEND it_pprop.
      CLEAR it_pprop.
      it_pprop-infty = '0008'.
      it_pprop-fname = 'P0008-TRFGR'.                  "3
      it_pprop-fval = wa_itab-trfgr.
      APPEND it_pprop.
      CLEAR it_pprop.
      it_pprop-infty = '0008'.
      it_pprop-fname = 'P0008-TRFST'.                  "4
      it_pprop-fval = wa_itab-trfst.
      APPEND it_pprop.
      CLEAR it_pprop.
      flag = flag + 1.
*****************************************************************************************************5
      BREAK-POINT.
      IF NOT wa_itab-lga1 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA01'.
        it_pprop-fval = wa_itab-lga1.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet1.
      ENDIF.
      IF NOT wa_itab-bet1 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET01'.
        it_pprop-fval = wa_itab-bet1.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************6
     IF NOT wa_itab-lga2 IS INITIAL.
       it_pprop-infty = '0008'.
       it_pprop-fname = 'P0008-LGA02'.
       it_pprop-fval = wa_itab-lga2.
       APPEND it_pprop.
       CLEAR it_pprop.
       bet1 = wa_itab-bet2.
     ENDIF.
      IF NOT wa_itab-bet2 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET02'.
        it_pprop-fval = wa_itab-bet2.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************7
      IF NOT wa_itab-lga3 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA03'.
        it_pprop-fval = wa_itab-lga3.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet3 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET03'.
        it_pprop-fval = wa_itab-bet3.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************8
      IF NOT wa_itab-lga4 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA04'.
        it_pprop-fval = wa_itab-lga4.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet4 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET04'.
        it_pprop-fval = wa_itab-bet4.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************9
      IF NOT wa_itab-lga5 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA05'.
        it_pprop-fval = wa_itab-lga5.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet5 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET05'.
        it_pprop-fval = wa_itab-bet5.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************10
      IF NOT wa_itab-lga6 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA06'.
        it_pprop-fval = wa_itab-lga6.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet6 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET06'.
        it_pprop-fval = wa_itab-bet6.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************11
      IF NOT wa_itab-lga7 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA07'.
        it_pprop-fval = wa_itab-lga7.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet7 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET07'.
        it_pprop-fval = wa_itab-bet7.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************12
      IF NOT wa_itab-lga8 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA08'.
        it_pprop-fval = wa_itab-lga8.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet8 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET08'.
        it_pprop-fval = wa_itab-bet8.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************13
      IF NOT wa_itab-lga9 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA09'.
        it_pprop-fval = wa_itab-lga9.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet9 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET09'.
        it_pprop-fval = wa_itab-bet9.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************14
      IF NOT wa_itab-lga10 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-LGA010'.
        it_pprop-fval = wa_itab-lga10.
        APPEND it_pprop.
        CLEAR it_pprop.
        bet1 = wa_itab-bet2.
      ENDIF.
      IF NOT wa_itab-bet10 IS INITIAL.
        it_pprop-infty = '0008'.
        it_pprop-fname = 'P0008-BET010'.
        it_pprop-fval = wa_itab-bet10.
        APPEND it_pprop.
        CLEAR it_pprop.
      ENDIF.
*******************************************************************************************************15
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-LGA11'.
   it_pprop-fval = wa_itab-lga11.
   APPEND it_pprop.
   CLEAR it_pprop.
   bet1 = wa_itab-bet2.
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-BET11'.
   it_pprop-fval = wa_itab-bet11.
   APPEND it_pprop.
   CLEAR it_pprop.
********************************************************************************************************16
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-LGA12'.
   it_pprop-fval = wa_itab-lga12.
   APPEND it_pprop.
   CLEAR it_pprop.
   bet1 = wa_itab-bet2.
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-BET12'.
   it_pprop-fval = wa_itab-bet12.
   APPEND it_pprop.
   CLEAR it_pprop.
********************************************************************************************************17
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-LGA13'.
   it_pprop-fval = wa_itab-lga13.
   APPEND it_pprop.
   CLEAR it_pprop.
   bet1 = wa_itab-bet2.
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-BET13'.
   it_pprop-fval = wa_itab-bet13.
   APPEND it_pprop.
   CLEAR it_pprop.
********************************************************************************************************18
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-LGA14'.
   it_pprop-fval = wa_itab-lga14.
   APPEND it_pprop.
   CLEAR it_pprop.
   bet1 = wa_itab-bet2.
   it_pprop-infty = '0008'.
   it_pprop-fname = 'P0008-BET14'.
   it_pprop-fval = wa_itab-bet14.
   APPEND it_pprop.
   CLEAR it_pprop.
BREAK-POINT.
      CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
        EXPORTING
          number = wa_itab-pernr
        IMPORTING
          return = wa_bapireturn1.
      BREAK-POINT.
     IF c_action = 'INS'.
       CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
         EXPORTING
           pernr           = wa_itab-pernr
           actio           = 'INS'
         tclas           = 'A'
           begda           = wa_data-begda_out             "'20110401'
           endda           = wa_data-endda_out             "'99991231'
           dialog_mode     = '2'
         luw_mode        = '1'
         IMPORTING
           return          = wa_bapireturn
           return1         = wa_bapireturn1
           hr_return       = wa_hr_return
         TABLES
           proposed_values = it_pprop
           modified_keys   = it_modified_keys.
       IF NOT wa_bapireturn IS INITIAL.
         WRITE : / wa_bapireturn.
         CLEAR : wa_itab , wa_bapireturn.
       ENDIF.
     ELSEIF c_action = 'MOD'.
        CALL FUNCTION 'HR_MAINTAIN_MASTERDATA'
          EXPORTING
         infty         = '0008'
            pernr           = wa_itab-pernr
            actio           = 'MOD'
            begda           = wa_data-begda_out             "'20110401'
            endda           = wa_data-endda_out             "'99991231'
      record        = p_record
         recordnumber = wa_itab-SEQNR
         operation     = change
         nocommit      = nocommit
            dialog_mode     = '0'
         IMPORTING
            return          = wa_bapireturn
            return1         = wa_bapireturn1
            hr_return       = wa_hr_return
          TABLES
            proposed_values = it_pprop
            modified_keys   = it_modified_keys.
        IF NOT wa_bapireturn IS INITIAL.
          WRITE : / wa_bapireturn.
          CLEAR : wa_itab , wa_bapireturn.
        ENDIF.
     ENDIF.
      CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
        EXPORTING
          number = wa_itab-pernr
        IMPORTING
          return = wa_bapireturn1.
    ENDLOOP.
ENDLOOP.

Here is a sampe, and the logic you are using for wages goes in the internal table for wages (you already have the enqueue & dequeue so you don't have to worry about that, so you only have to add the BAPI_TRANSACTION_COMMIT):
CALL FUNCTION 'BAPI_BASICPAY_CHANGE'
EXPORTING
    employeenumber             = pa0008-pernr
    subtype                    = pa0008-subty
    objectid                   = pa0008-objps
    lockindicator              = pa0008-sprps
    validitybegin              = pa0008-begda
    validityend                = pa0008-endda
    recordnumber               = pa0008-seqnr
    payscaletype               = pa0008-trfar
    payscalearea               = pa0008-trfgb
    payscalegroup              = pa0008-trfgr
    payscalelevel              = pa0008-trfst
*   NEXTINCREASE               =
*   LOCALALLOWLEVEL            =
*   PARTNERSHIP                =
*   CURRENCY                   =
*   COMPARISONPAYSCLTYPE       =
*   COMPARISONPAYSCLAREA       =
*   COMPARISONPAYSCLGRP        =
*   COMPARISONPAYSCLLVL        =
*   COMPNEXTINCREASE           =
*   CAPACITYUTILLEVEL          =
*   HOURSWORKEDPERPERIOD       =
*   ANNUALSALARY               =
*   CASEGROUPCATALOG           =
*   CASEGROUP                  =
*   CURRENCYANNUALSALARY       =
*   REASON                     =
*   NOCOMMIT                   =
* importing
*   return                     =
TABLES
   wagetypes                  = wages.
Regards,
Ryan Crosby

Not able to modify Guage( dials) in OBIEE 11G

After selecting Guage view(any view default or otherwise), I am not able to modify the properties for the same. If I Click on the edit Guage properties and make some changes and then click on ok, it throws a pop up at me saying ARE YOU SURE YOU WANT TO LEAVE THE PAGE.... and options 1) leave the page and 2) stay on the page.
Please help is this a bug in OBIEE 11g, is there a patch available to correct this?

This is a bug in obiee 11.1.1.5 . Please apply the patch 12761355(Request a password from Oracle Support). It is not at all related to any browser.
Thanks,
Anil

Version: you are editing the shared version of this page. Not able to edit the page

Hi,
I have a sharepoint 2010 publishing site, which i have version upgraded to Sharepoint 2013.
I have the below features already activated:
1.Activate office sharepoint publishing infrastructure feature at site collection level.
2. Activate office sharepoint publishing feature at site level.
Also, versioning is enabled in the pages - document library settings.
The page does not seem to be checked-out by anybody else, and I am trying to edit the page using the system account.
I am not able to modify the page, and the ribbon does not show up.
What am i missing?
Thanks

This is not an error message but simply letting you know you are making changes to a page that will affect everyone viewing
the page vs. a personal view.
See more at:
http://www.go4sharepoint.com/Forum/version-editing-shared-version-page-7439.aspx#sthash.P2ZfVOBm.dpuf
http://office.microsoft.com/en-us/windows-sharepoint-services-help/about-web-part-page-personal-and-shared-views-HA001160936.aspx
Mark ANSWER if this reply resolves your query, If helpful then VOTE HELPFUL
INSQLSERVER.COM
Mohammad Nizamuddin

Not able to reset the page number in XML Publisher based on each PO

Not able to reset the page number in XML Publisher based on PO
Hi,
I have created a custom purchase report and rtf template. In the rtf template, I have added the page number feature (i.e. Page 1 of 5) from Word in the template. When I run the report for a range of POs, I expect the results as follows:
I have given 3 POs on single request. (PO#1 has 3 pages, PO#2 has 2 pages and PO#3 has 4 pages), the page number on each PO should look like as follows:
PO#1 page 1 of 3, page 2 of 3, page 3 of 3
PO#2 page 1 of 2 page 2 of 2
PO#3 page 1 of 4, page 2 of 4, page 3 of 4 and page 4 of 4
But the page number displays on each PO as follows:
PO#1 page 1 of 9, page 2 of 9, page 3 of 9
PO#2 page 4 of 9 page 5 of 9
PO#3 page 6 of 9, page 7 of 9, page 8 of 9 and page 9 of 9
Here I have to reset the page number based on each PO. If anyone done this already, can you please share with me.
Thanks,
Ram.

Hi
One clarification please.
Are you putting Page # of ## in the for-loop section? I mean it should be within For-each@section block.
Even if this doesn;t work, then try using Insert->Page Break after every PO.
Regards
Varun

I got a Model Number: A1181, My hard drive burned out. I bouhgt a new hard drive Wd Scorpio 500 GB. When i tried to install the MAC OS, it identies a hard drive with 3.6 TB and i'm not able to do the installation.

I got a Model Number: A1181, My hard drive burned out. I bouhgt a new hard drive Wd Blue Scorpio 500 GB. When i tried to install the MAC OS, it identifies a hard drive with 3.6 TB and i'm not able to do the installation. I touhgt the new ard drive was bad but i was able to install windows XP. Any ideas what do i have to do?

Well, let's hope that nothing was jiggled out of place when you were installing the new hard drive. Your optical drive may just be out of alignment or the disc you have is "dirty." Get a lint-free cloth and some rubbing alcohol, then clean the disc as thoroughly as you can starting from the center and working outward in a concentric circlular motion. See if that helps. In particular clean the inner portion well.
If this does not help, then you have a problem. You have opened the computer yourself. That action voids all support from Apple. If you take the computer in for service the store may refuse to service the computer. This is not related to your now expired warranty.

HT5252 I tried to change my metadata date and got this Aperture was not able to adjust the date and time of the original file "01769_p_h13ajyrm4bm0944.jpg" because it is locked or you do not have permission to modify it.

I tried to change the metadata date. It changed the date on my photo, but when I checked the box that said "also change my original file", it gave me this error message.
Unable to change original file. Aperture was not able to adjust the date and time of the original file “01769_p_h13ajyrm4bm0944.jpg” because it is locked or you do not have permission to modify it.
Wassup?

What is your Aperture version? The older versions of Aperture 3 had a problem to apply Metadata changes to the original file.
If you are using the current version Aperture 3.4.5, try to repair the permissions on your Aperture library, if you have not already done so:
Launch Aperture with the key combination ⌥⌘ held down and select "Repair Permissions" from the First Aid PAnel, that will appear.
If that does not help, post back with more information on your original files - are the referenced or managed? Where is your Aperture library located? Since when do you have this problem? And what did you do directly before noticed the problem for the first time?
Regards
Léonie

HT5188 I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad. One code in the spreadsheet says it's already been used but shows no serial number or device name.

I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad using Apple Configurator. One code in the spreadsheet says it's already been used but shows no serial number or device name.

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

Dynamically modifying the number of Form detail rows

Hi,
A challenge for you all!
I am building a product details system in Portal forms.
One of the screens is a Product Ingredients form with Product as the master block and ingredients as the Detail block. There can be between 1 and 20 ingredients in any 1 product and as these all have to sum to a volume percentage of 100% the client would like to see all ingredients for a product on 1 screen and not have to do Next/Previous to see them all.
As you increase detail rows on a master detail form the performance of the form decreases dramatically so I would like to minimise the number of detail rows displayed for each product to maximise performance.
To this end I wish to dynamically modify the number of detail rows displayed to match the number of ingredients on a product as that product is queried.
I can handle figuring out how many rows I want to set the page to but have not been able to figure out how to change the number of detail rows displayed at run time.
Anyone know how (or if!) this is possible ?
All help gratefully recieved
Andy

The rownum pseudo-column hold the number of the row but it doesn't work like you expect. It is assigned before sorting for example and it is not absolute. SQL conceptually deals with sets and sets have no inherent order. See http://www.oracle.com/technology/oramag/oracle/06-sep/o56asktom.html
If you want to have an absolute number in a row you will need to maintain it yourself with PLSQL code.

Not able to view the uploaded PAR file in the portal archive selection.

Dear All,
I have modified com.sap.portal.runtime.logon.par and have renamed it to some other name.
Now I have uploaded the par file.
The problem is that when choose new from PAR option (to create iview from a par file),I am not able to see the par file in the Portal Archive selection.
I also want to know that if I am able to call the par file in the iview, can I use this iview to have a portal login.
Our requirement is that we want to give login page for the portal in the portal home page.The portal home page will be for the anonymous users.
Kindly try to guide me

Hi Nitin,
Check ur Portalapp.xml file. If u have the following code in that just <b>remove</b> them
<property name="com.sap.portal.pcm.Category" value="platform">
<property name="inheritance" value="final"/>
Deploy it again.now u can see that par in ur portal.Refer this thread also
PAR File not seen
Regards,
Tamil K

Not able to get the data in COSB Table

Hi Colleagues,
I have created a Project and assign the WBS number to a Sales order and also have done all the settings in Result Analysis.
But still not able to get the data in COSB table.
Could you please suggest me the steps and process, Might be i have missed something..
Thanks in Advance
Regards
Nitin

Hi Ken,
I have below mentioned requirement
COSB will show value by object number and need to pass the object number to PRPS table to find the corresponding WBS element and then pass the WBS element to VBAP table to find the corresponding SO line item.
Please let me know as Functional prospect what I have to do to bring this values in COSB table.
Regards
Nitin

PI is not able to pick the file from the FTP folder

This is the FILE TO IDOC scenario. We have configured the file adapter. But its not able to pick the file from the specified directory. We have tried changing the transfer mode from Binary to Txt & also we have tried to put advance selection for source file but it didn't work. Its throwing the below error:
PI Adapter Log:
An error occurred while connecting to the FTP server '10.130.150.21:8529'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 451 Unexpected reply coderequested action aborted: local error in processing'. For details, contact your FTP server vendor.
Also we have contacted the FTP team & they told that PI is sending an unsupported command. So instead of taking the file TLOG.txt, its treating this file name a s a directory. Please find the logs from FTP end below:
FTP Log:
(207197)2/5/2013 14:48:25 PM - sysisappi (63.130.82.16)> 230 Logged on
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> FEAT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211-Features:
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MDTM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> REST STREAM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> SIZE
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLST type*;size*;modify*;
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLSD
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH SSL
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH TLS
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> UTF8
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CLNT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MFMT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211 End
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ 0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 PBSZ=0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 Protection level set to P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD /Qas
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas" is current directory.
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD SAP_ORION
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD Inbound
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD IRIIN04
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 221 Goodbye
It should list *TLOG.txt* but instead it is trying to get into a directory named *TLOG.txt*. same for other interface.
So me & my team is struggling for last couple of days to fix this issue.Please share your suggestion

Hi Sisir
The screen shot of your config doesn't seem to correspond to the FTP log. I say this because the * is dropped from file name pattern "*TLOG.txt" (comparing your config and the FTP log). Can you share an updated FTP log?
Sisir Das wrote:
"/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
Also, like Rajesh suggested, have you tried to manually check permissions by logging in, traversing the directory, and getting the file?
By the way, we always use backslash \ instead of forward slash in our configs. Not sure this would make any difference for you though. Also, I don't normally use a trailing \ at the end of the source directory path.

Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
Thanks

You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
Are you with me so far? - Yes.
And @ Varjak is right that after the 3rd restore I get the replacement error.
Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Message was edited by: jabgars

Not able to modify the number of horizontal divisional lines in chart

Similar Messages

Maybe you are looking for