I am not able to see the contents of the mail in the screen although the mails appear in the list
I have registered my Yahoo, GMail and also my office mails on to my Apple Ipad. I am able to see listing of mails, the mail contents does not appear on the screen even after clicking on the mail.
Try closing the Mail app completely and see if the bodies of the emails show when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Similar Messages
-
HI not able to see business content in sap bi7.0
Hi GUru's,
We have upgraded from BW to BI 7.0 recently,
but we are not able to see any business content objects like
0sd_co1.predefined objects in rsa1 screen
Can anyone please help me out.Hi Venkat,
did u check it out for the BI component.
check in your sys..........
menu -
> system----
> status.
If itz not there try to install the BI component.
Regards,
Vijay. -
Not able to see Message Content while using SOAP Adapter
Hi freinds
I am working on following scenario
Web Application ---> SOAP Adapter ---> XI ---> RFC Adapter ---> SAP R/3
Web application is using the WSDL file which I generated from XI.
Now everything is going fine & I am even getting the XML data in SAP R/3 ( Order is getting created ) but in RWB under message monitoring I am getting " <b>Content of message deleted to save memory</b> " for message content.
Even in SXMB_MONI for that timeframe it is showing " <b>No messages available for selection</b> ".
Can you tell me why I am not getting the message content & the message itelf in SXMB_MONI. What I need to do in order to get the message content while monitoring.
Best Regards
Lalit
P.S --> I am able to see the message content if I am using File Adapter in place of SOAP AdapterHi
After adding the LOGGING_SYNC parameter with value 1. I am able to see the messages in sxmb_moni but they have status as " System Error - Restart not possbile " with the following error ::
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>402</SAP:P1>
<SAP:P2>ICM_HTTP_TIMEOUT</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>SAP Web Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://sapxidev:50000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP Web Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://sapxidev:50000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://sapxidev:50000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2>500 Connection timed out</H2><br>Connection timed out (-5) <br><hr> <table border="0"> <tr><td>Error:</td><td>-5</td></tr> <tr><td>Version:</td><td>6040</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed Dec 21 13:59:55 2005 </td></tr> <tr><td>Module:</td><td>icxxthr_mt.c</td></tr> <tr><td>Line:</td><td>2559</td></tr> <tr><td>Server:</td><td>sapxidev_XID_00</td></tr> <tr><td>Detail:</td><td>Connection to partner timed out</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2003, SAP AG</a></FONT></td></tr></table></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when receiving by HTTP (error code: 402, error text: ICM_HTTP_TIMEOUT)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
As my payload was of 100 records with 15 fields I guessed that this can be the reason I am getting timed out. So next time I just send 2 records & this time no error & everything went fine.
Now one thing I need to do is to increase the TIMEOUT value with the help of <b>OSS Note 824554</b>.
But still in RWB ( with 2 records also ) under message monitoring I am getting " <b>Content of message deleted to save memory</b> " for message content.
My objective now, is to display the payload which is coming from Web Application via SOAP Adapter in RWB. Can you help me in this.
Best regards
Lalit Chaudhary -
Not able to add more content in a topic
Hi,
I am working on a project in RoboHelp7. The final output that I will be giving are seperate html files.
The problem that I am facing is, even if the helpbody height is set to auto, I am not able to see that content I add into a topic after a certain length.
However, the content that I've added can be seen if I open the html file of that topic.
Please help!!
Thanks,
DivyaWhere are you setting helpbody height?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
Users not able to see remote users on the node network
Users that belong to one node are not able to see users in another calendar
server node. Both calendar servers are pointing to the same directory server.
Some errors that occur in the log files:
DEXOTEK ERRCODE Ox13608 -> SchedBaseOpen: Section name too long
DEXOTEK ERRCODE Ox13608 -> OpenConnection: SchedBaseOpenOnHost
And when uninode -cws nodeID is run, it does not report being able to see all
the users and resources on the remote nodes.
uninode: connected to hostname.net.xxx.com, node 10000
directory of items: 10 (USERS = 10/RESOURCES = 0)
CONNECTION EX AV Q-SIZE IN-PROCESS IMPORT-DIR
(10000)->xxxxxx.xxx.com(10001) 2 2 0 0 370 (U=370/R=0)
Here is the nodes.ini file:
+ H=xxxxxxx.xxx.com/N=10000
+ H=xxxx.xxx.com/N=10001
all=2
There is a reported bug, that 16 chars is max on domain names for the nodes.ini
file, which means that you need to change that file and use:
a) an alias that can be resolved on the network with either DNS or local
host files
b) use the IP address.
As documented in the release notes, here is the procedure on how to modify the
hostname when it is too long. Or how to modify the hostname for any reason.
Fix for long host names problem
If the fully qualified domain name for your network exceeds 16 characters, it
will be necessary to shorten the host name of all the servers in the Calendar
Server network . These instructions must be carefully followed to avoid causing
problems with the network. Ensure that the procedure is applied to ALL nodes in
the Calendar network.
1) The following procedure should be carried out on each server in the
Calendar network:
a) Bring the Calendar services down.
% unistop -y
b) Run the unidbfix command in export mode.
% unidbfix -export -n node-id
This will create a remotenode.ini file for each node on the server. The file is
located in the node's perm directory.
Example:
If you have two nodes on the server ROCK, node 1(in N1) and node (in N2), the
files are:
/users/unison/db/nodes/N1/perm/remotenode.ini
/users/unison/db/nodes/N2/perm/remotenode.ini
The remotenode.ini file will look something like this:
[1]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni2"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
[2]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni4"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
2) Once you have run unidbfix in export mode on all the servers, proceed as
follows:
a) Compare the remotenode.ini files and verify that the entries are the
same. In each file, you will note that an entry for the local node is not
included.
b) Edit one of the files (on any of the servers). This file will be
referred to as the master file. Add the appropriate entries for the
local node (copy the section from one of the other files). Modify the
RN_HOSTNAME in each of the sections of the master file to shorten the
name.
c) Copy the master file in the perm directories of each node on all the
servers.
3) Once the master file is in the perm directory of all the nodes, proceed as
follows on each server:
a) Run the unidbfix command in the -import mode.
% unidbfix -import -n node-id
b) Edit the nodes.ini file on the hub server and make the same changes to
the host names. You do not need to apply the changes.
c) Edit the [UTL] section of the /users/unison/misc/unison.ini file and
change the host name.
d) Start up the services.
% unistart
4) After all the changes have been made, run the uninode -cws all and
uninode -snc all commands and verify that the results are accurate.See this:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8203.html
You should then see your pcs listed in Finder's sidebar under the shared section.
Regards -
Not able to see tables while creating an EOo
While I am trying to create and EO I am not able to see any table.
I have tested my connection its working fineDid you checked the checkboxes given under Database Schema in EO Creation screen:
Tables, Views, Synonyms and snapshots.
Thanks
--Anil -
Not able to see the content of opened files (.jpg or .psd) in Photoshop CS6
I recently downloaded Adobe Design and Web Premium CS6. I am not able to see the content of any of the file I open (.psd or .jpg). I do see the file has been opened as the file name appears on the open file tabs, I also see the preview of the file in the Navigator Window and list of layers in the layers window. I am relatively new to this so might be missing on some option that needs to be turned on or something.
I am using Window 7 Professional, Service Pack 1, with 8GB RAM.
Any suggesstion/help is greatly appreciated.This is going to be the weak point:
Intel(R) HD Graphics card
While the Intel HD chip is fine for general computer work, it is weak for programs, like Photoshop and Adobe Premiere. The driver support is usually very bad, as well. If Lenovo does not have updated drivers, that work better, about the only choice that one has with a laptop is to turn OFF graphics accleration, and wait for a new driver. That will probably be very slow in coming.
Good luck,
Hunt
PS - Noel's link will list what you are missing. -
I am not able to see the installed BI content object in the DWB
Hi ,
I am not able to see the installed BI content object in the DWB
and the BI server is new one, this is the First BI content info object I am installing.
for example I have selected 0Account BI content info object for installation
I followed the below steps for installation.
1 Drag and drop of 0Account info object in right side window.
2.Grouping option selected as only necessary objects.
3.collection mode selected as manual collection then executed using execuiton button.
4.selected the install all below option.
5.finally installed the object with install in background option.
job got finished successfully.
please let me know if I did any thing wrong and please post valuable suggestions.
Regards.
SrinivasHI
If yor installing first time you have to select info area and object catalogs also else it will go and stored in unassigned nodes. whatever your doing the option for installing the business content everything is same, but in right hand side panesl select the info ares etc.
regards,
Chandra. -
Not able to see the request in ODS to activate
Hi all,
I have a content ODS, i scheduled a infopack and the data came in thru ok. But inorder to upload the data into the cube, i know i need to activate it before. But when i rightclick and go to activate data in the context menu .. there is a popup which shows all the request id's in the ODS. but i'm not able to see my request to activate it ... Is there some flag has to be set inorder to see the requests in the activation list? once its activated, I think all i need to do is "UPDATE ODS DATA TO DATAPROVIDER" as it is a standard content. Is there something else i need to do ..Pls guide.
Now, I have a new problem, when i'm trying to see the transfer structure, it doesnt open and i get a msg
Transfer method 'TRFC with PSA' is not supported by the source system
Diagnosis
The PSA transfer method is used to transfer data from source system CRM to transfer structure 0xxx_xx_xx_I_BB. Source system CRM does not support a PSA transfer.
Procedure
Define the PSA in the source system.
Its actually a content one i installed and i didnt do any customizations to it... Shouldnt it work out of box? If no!! how can i define PSA in the source system.
Any help is appreciated.
Mav.Hi Mave,
Kindly check the following:
1.) Are you sure that the loading process finished successfully in the ODS? Kindly ensure it did.
2.) Have you tried providing a longer <b>Date Range</b> in the <i>Request Display</i> (lower right).
--Jkyle -
I loaded Mozilla v31 on my PC laptop which uses Windows XP operating system with all current updates. When I click on my internet icon, it leads me to the Mozilla page with a Google search bar. Once I type a topic in and click for the search to begin, the Firefox page turns all black and I am not able to see any results or action being taken. I click on the back arrow and enter a new topic, and click on search button, it repeats the same behavior and the Firefox page turns black. Essentially Mozilla Firefox is not a usable browser unless I can fix it. Help!
When this happens, has the address bar changed to a google.com address or is it still blank?
Some graphical glitches are caused by an incompatibility between Firefox and your graphics card drivers. The standard workaround for bypassing this is to disable Firefox from using hardware acceleration. You can make that change here:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
That will take effect the next time you exit Firefox and start it up again.
More generally:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
* right-click and choose View Page Info > Security > "View Cookies"
* (menu bar) Tools > Page Info > Security > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then try reloading the page. Does that help? -
I am not able to see the valeus in the report on multiprovider.
Hi Gurus,
I have loaded an infoobject Document currency0DOC_CURRCY into DSO and assigned a constant "USD" to it and I am able to see that value in DSO through the display data.
Later I moved the DSO into multiprovider by loading the 0DOC_CURRCY in to multiprovider and wrote a query on it.
But I am not able to see the values for 0DOC_CURRCY in the report.
Why I am not able to see the valeus in the report which is executing on the multiprovider.
PLs help me with a solution.Hi,
First step is to checck the data in the ODS.
Second is, You use Identify Characteristics and Select Key Figures to make InfoObject assignments between MultiProviders and InfoProviders.
If this is checked you 70 % of the job is Over in your creating multiprovider.
For more information
http://help.sap.com/saphelp_sm40/helpdata/en/cf/bc734190ba137de10000000a155106/content.htms
santosh -
Not able to see the Adapters@Integration Directory!!
Hi,
I have created Data types,Messages Types, Message Interface in Integration Repository.
I have created a scenario in Directory and assigned Business systems too(I'm doing file to file scenario) and while trying to create Communication channels i'm unable to see the adapters under Parameters Tab.
<b> Its not showing any Adapters in ADAPTER TYPE option and also
Transport Protocol and
Message Protocol are blank.</b>
What could be the reason??
Please guide me in order to complete my scenario.
Thanks in Advance.
LNMhi madduri,
check these links....
Not able to see the adapter types in ID
Adapter Engine not found in ID
<b>check the last post here.... u will get ur answer !!!</b>
Adapter Type not found
Do these steps
1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
2) Unzip the contents and copy the file XI7_0_SAP_BASIS_7.00_10_00.tpz (if you are using PI 7.0 or else download the file for your XI version) to
/usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
3) Goto Repository (Design)
4) Choose -> Tools -> Import Design Objects
regards
BILL
**mark the thread answered when u got ur answer -
Hi,
Please help.
I am facing a problem while transporting a request to Production environment. I am using File Level Transport. When I create a transport file, it is successfully created in development system's /export location. Basis team moves the file production system's /import directory.
But here I am not able to see the imported tpzfile via Tool->import design objects , in Production environment.Hi,
Please find below from sap help.
After a successful import, the Integration Builder moves the imported TPZ files into the directory <systemDir>/xi/repository_server/importedFiles. The support package stack of imported software component versions is displayed on the Details tab page for the relevant software component version in the Integration Builder. If an error occurs, this information is important for support. Take one of the following precautions to retain the overview of the imported XI content:
● If the release and the support package stack are clear from the file name of the TPZ file, simply leave the files in the directory importedFiles (see above).
If a file with the same file name already exists in the directory importedFiles, the Integration Builder adds the date and time of the import to the file name of the imported export file. This enables you to check which file was imported last.
● After a successful import, you can keep the packed files, from whose naming convention you can derive the support package stack. Move them into the directory importedFiles, for example.
If version conflicts occur during the import, you can process and resolve them in the Enterprise Services Builder. In the case of corrupt export objects, you can force the import and skip objects that cannot be imported. The import is then incomplete and references to objects that are not imported are lost.
Regards,
Venkata S Pagolu -
I am not able to see the data By request id in ODS
HI Gurus,
I am trying to do data loads from flatflies based on Region to ODS(We have flat files based on region for each region we have one flatfile) .I have loaded 2 files into ods.But when i am checking the data in ODS by request id .I am seeind 2 regions data on one request id .I am not able to see the data for other request id.
For example:
We have two flat files one is region 1: 5100 and region 2: 5030
Request id 1: contains region 5100 data
request id 2 : contains region 5030 data.
But when i am checking the data in ODS its showing 5100&5030 data onn request id 1.I am not seeing any data for requestid 2.
Please help me out.Hi,
Active data cant be seen by Request id but definitely change log table contains request id and list of records per request
Go to Manage ---> Contents tab --> New Data. Over here you can enter the request number and check the data request wise.....The same can be done for Change log
Check the log in SM37 if it exists there or not.
May be the number of records will be more and depending upon the system processses it will be taking time to load.ID request is loaded to ODS then it could be activation time
Hareesh -
Not able to see the data in the report
Hi All
In my cube i am having data.But when i am running the report ,i am not able to see the data.
The error its throwing is -No Applicable data found.
what could be the problem,please provide me the idea to solve the problem.
Thanks®ards
syam prasad dasariHI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks -
Not able to see data in the qualifier table of the main tbl , Data Manager
Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reoYou may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan
Maybe you are looking for
-
DVI to HDMI or VGA to connect to HDTV
Hi I am researching buying a 40-42" LCD or plasma TV and I would like to be able to connect my IMac to the tv. I will mostly be using the TV to watch sports and to watch videos from my IMac. 1. Will 1080p videos played from the IMac produce good 1080
-
Hi! When i move code into database from aplication i have problem with database control of muttating data. I have to call plsql procedure wich do some actions by example after updating some data. Example: create table tab (col1 Number, col2 ..., colN
-
Bt infinity package 2 usage limits?
Hello a few weeks ago I got bt infinity package 2... I was just wondering is there any usage limits that come with it? whats the max ammount of data I can download eacxh month? thank you
-
When trying to clear the history (Browsing and download history, cookies, form and search history, and cache) firefox freezes and sometimes Ill get a warning for an unresponsive script. Using MacOSX 10.6.8 on Macbook Pro Using Firefox 10.0.2
-
AppleScript / saving file to a relative path
Hello everybody, I would like to make a script that saves current file to a relative path. For example: I have a psd opened file (that is in pictures/01/image01.psd) and I need to save it one level up as a JPEG ( pictures/image01.psd). This is what I