I am so frustrated I could spit.. I have been experiencing issues for 1 week now and am unable to use my iphone. It started by shutting down every time I'd try to use it and now it won't turn on. When I plugged it in the charger apple flashes .
i have been unable to use my iphone for going on a week. It started by shutting down when ever I'd try to use it. Now it has just a dead black screen. If i plug it in it doesn't charge And the flashing apple continues every 2seconds never charging or turning on. I'm frustrated because I can't even get in to troubleshoot. I bought an iphone cuz I thought it was the best phone at the time. My contract isn't up til Aug. and I'm stuck with a bill and no phone. I do not own a computer but I have an ipad4 which I love. HELP!
Make an appointment at the genius bar are your nearest Apple store. At this point there is nothing you can do without a computer, so if you don't have one and don't know anyone who has one that you can use the Apple store is a good fallback.
Similar Messages
-
i have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.
Given the state your device is in you have already erased your old stuff. You have an image on the screen that says, "Connect to iTunes." That's what the image means. So you will need iTunes on your computer.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS from iOS 5 or Later
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
I haven't used my iPod touch 4g in a while and now it won't turn on or connect to my computer to charge. holding power+home isn't working either. i've had it plugged in for a while, but i'm pretty sure that's pointless if it won't even connect....help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
What can I do? I dropped my iphone (not from a great height) and now it won't turn on however when I plug it in the white apple shows on my screen. My lock button has been broken for awhile so I can't even try switch it on!
Once you have a proven, working Charger... Charge the Device for a couple of hours. Then try to turn it on.
If no joy...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first... -
My ipod touch needed to be updated so I did and now it won't turn on all it does is show the itunes icon and says toconnect it to itunes so I did and let it be updated and now it wont turn on and I tried resetting but nothing changed.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iphone won't turn back on after it fell off the charger. When I plug it back into the charger, the screen with the apple icon pops up and it buzzes and just keeps repeating the same two steps. What can I do? Help!
Try these steps: http://support.apple.com/kb/ts3281
-
I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?
Wifi: my Cell phone will remember 10 wifi connections. So delete any you don't use often and your home wifi and try to enter home wifi again.
if it still won't connect to home wifi, call your internet provider for help. You may need a newer router or different settings Or upgraded service. Your phone seeks the best connection and will refuse lesser connections.
last resort. Backup the phone. Do a full reset, then restore as new with the backup.
if still not fixed, go back to apple and insist on repair or replacement.
HOWEVER. voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect. -
Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,Apple wouldn't need to ask the stupid question"Do you want to reopen Aperture?" to begin with. Anyone out there having the same annoying problem?? I like Aperture or used to anyway,but if this nonsense continues, I will be forced to buy some other editor besides "No hanging fruit - Adobe photoshop CS5" or "I don't like you so I'm shutting down - Aperture".
Hello,
sorry to hear about your troubles, but we will need to have more technical information about your problem to be able to help you:
There may be several reasons that can cause Aperture to crash on start up:
You may have imported an image (or video) in an encoding that Aperture does not support, or that is larger than 2 GB, or that is corrupted and Aperture cannot process it
Your Aperture Library or Preferences may have been corrupted
Or you are having a system wide problem with your machine.
Or you may simple be running out of disk space.
It would help, if you could post the crash log from your last crash. Also, more details on your Aperture Library: Is it managed or references? how large is it? Is it on your system drive or on an external drive?
What have you done, shortly before the trouble started? Have you imported new images or videos? Did you install any plug-ins or any new software, lile Final Cut?
Try, if you can get Aperture to launch, if you defer the generation of Previews: Hold down the SHIFT-key immediately after you start Aperture to prevent preview generation for that session. If a damaged image in your library is preventing normal opening, this may allow you to start Aperture. If this succeeds, try to identify the broken image or video among the images you recently imported and remove it from the library.
Regards
Léonie
Don't you think your user name is a little bit tactless in an Apple provided forum? -
I have an iPad Mini (1st Gen). Now it won't turn on at all. I've tried all the troubleshooting steps I've found online (plug into computer, hold power/home buttons, etc). Nothing works. Any suggestions?
Take it to the Apple Store and let them have a look.
-
I am working on Mac OS 10.7.2 using Quark 9.I. The program keeps shutting down every time I try to work on a file I created on my MacBook Pro using Quark 7.01. Help!
http://support.quark.com/SSP/Login.aspx?ReturnUrl=/ssp/default.aspx
-
My ipod froze so I restarted it, but then it happened again, so I restarted it again, and it was fine but then it ran out of battery. Now when I plug it into the charger it, the Apple sign comes up for 5 seconds then disappears, it doesn't turn on or come up with the charging sign. Is it not going to work again, or is ther something I can do? Please help.
I have the same problem, and my Ipod turned off (when I held the home and power button)
but then when I held down the home button (after turned off) nothing happened, the screen is still black.
Do you know what I should maybe do?
Thanks is advance -
i made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it to movies idvd itunes,and quicktime in a variety of sizes although not the smallest as I want to watch it on my computer and tv. All videos were recorded on an iphone. Apple store couldn't help me and suggested I redo part of the project. It is a really good project and would take hours to redo it . I just want to export it. Can any one please help???
Hi
Trying to get a picture of it.
• Free Space on Your Start-Up (Mac OS) Hard Disk. How Much ?
• Any other hard disks connected ?
• If so - Formatted as ?
Yours Bengt W -
My Imovie continues to shut down every time i File-Import- then it pops up with everything i can import and right before im about to click on something it quits. I can't use my imovie until i figure this out, please help!
Thanks so much Meg. Unfortunately, iTunes is the program I use to perform syncing. I don't really have other outside options. It is also the location of the backup I would use to restore my phone, and my only way to reclaim important data. I am concerned that, since the last backup occurred when the "other" bar was only moderately huge (around 29G I think), that a backup would replicate the problem back onto my phone.
My contacts, etc. are all in address book and the calendar app on my Mac. As far as I know, iTunes is the way to get them back, but iTunes is where the problem is.
Any thoughts on this? -
My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Itunes shuts down every time i try to sync with my iPhone
itunes shuts down every time i try to sync with my iPhone
Well reading some other discussions i have found to try deauthirizing and reauthorizing, that didn't work. I guess i could remove iTunes and reinstall, but i hate to do that. Maybe I should take all the music off and sync and then try putting it back on? Worked before i put music on there, but then there wasn't much to sync at that time. Anyone know of other possible causes that would make iTunes stop working?
Maybe you are looking for
-
Oracle 8.1.7/9iAS installation problem on IBM AIX 5.1 - loadext fails
Dear colleagues, tried to install Oracle 8.1.7 and then Oracle 9iAS over AIX 5.1 on IBM eServer p-series. The installation fails in the very beginning - loadext for post-wait Kernel Extension (/etc/pw-syscall) fails with 'exec format error'. Document
-
why isn't the new Keynote compatible with previous versions? I have a new Keynote on my iPad mini, and don't want to install the new version my MacBook
-
Help! they keyboard and mouse have stopped working on my iMac. I had adjusted the universal access features for my mother who is legally blind to try the Voice Over features on my iMac and I thought that I hadn't reset something correctly when the
-
Infoview option missing from interface / Cant run webi report
Hello all I recently installed XI 3.1 enterprise version on my computer and the installation was sucessful, I can access deski, designer and all other expect infoview (webi). When I try to view sample webi report , I get a message that ' Cannot perfo
-
Is there a way of not deploying test suites via ant command while moving to test and higher environments. Currently, I have created tests under test suites and works perfectly in dev env but when I try to deploy it in test env the unit tests also get