I am trying to restore my mac osx 10.7.4 from an ext lacie harddrive and getting message "u can't open the application lacie backup support because power pc application are no longer supported"
i am trying to restore my mac osx 10.7.4 from an ext lacie harddrive and getting message "u can't open the application lacie backup support because power pc application are no longer supported"
Use any number of free alternatives to your nearly decade old version of MS Office.
Consider
LibreOffice (donation-supported)
NeoOffice (free)
OpenOffice (free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for years. Life is better without Microsoft.
Similar Messages
-
Have can't open iphot because power pc apps are no longer supported
I recently burned up an 8 year old Mac (all in one machine) for lack of better terminology.
It was replaced with a MacMini so I could connect to an existing monitor.
Upon launching, I have an error, when I open iPhoto or iDVD, etc that says: Can't open Iphoto because power pc apps are no longer supported.
What do I need to do now?
I'm assuming the software I had originally on my old machine is outdated? But I also thought it was pre loaded with all the basic stuff.
AS you can tell I'm not the biggest user............ but I would like to be!Sounds like someone restored your programs from you old PowerPC-based system to your new system, probably running OS X 10.7 Lion or 10.8 Mountain Lion. Apple dropped the capability to run PowerPC-based code in these systems. You can go to Launch pad and access the App Store to buy updated versions of the iLife programs. However, iDvd is no longer available from Apple. You can buy iLife in a box from sources like Amazon.com that will have iDvd included, and possibly even by calling the Apple online store at, in the US, 800-MY-APPLE. Ask for the latest version of iLIfe with iDvd off the legacy products list.
You probably should click on the apple on the left of the menu bar, click about this mac, more info, systems report, and applications (which will take a few moments to display). Click kind to sort the list. Any programs that say PowerPC won't run under 10.7 Lion or 10.8 Mountain Lion. -
trying to load efax from new hp emachine. you get this
;You can’t open the application “eFax Messenger” because PowerPC applications are no longer supported.
when is hp, efax, or apple getting their act together to fix the issue?Hi,
The eFax service provided with the HP device is a remote cloud feature and have nothing to do with installing any software on your computer.
Any software named eFax you may trying to install is not affilated with HP in any way, as well I doubt if it is affilated with the eFax service in any manner.
In order to enable and use the eFax feature please follow the steps below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02970945&tmp_task=useCatego ry&cc=us&dlc=en&lang=en&lc=en&product=5070121
Regards,
Shlomi -
tried to install software for canon pro 100 getting message "you can't open the application "setup.app" because it is not supported on this architecture"
any suggestions?This is what Canon suggested, still doesn't work.
Thank you for your E-mail inquiry regarding your PIXMA PRO-100.
Based on the information provided in your email, I recommend you download and install the driver for your PIXMA PRO-100 from the web site listed below.
http://www.usa.canon.com/cusa/support/professional/professional_printers/destop_ printers/pixma_pro_100#DriversAndSoftware
You will be required to download and install the following:
1. PRO-100 series Mini Master Setup (OS X 10.5/10.6/10.7/10.8) (under Drivers)
Should you require further assistance, please feel free to email us or visit our customer support website at http://www.canon.ca
still receiving Alert This software is not supported by your computer (powerPC-based Macintosh)
Also received error You can't open the application "Setup.app" because it is not supported on this architecture.
thanks for your reply A Brody. -
I am having problems with trying to update safari and this keeps popping up, Safari can’t open the file “Safari_Updater-2.exe” because no available application can open it. Also, I have a bunch of pops and I have my pop up blocker on but I keep having pop ups.
The info below should help with your pop-up issue.
Check the links below for options to remove the Adware
Easy method: http://www.adwaremedic.com/index.php
Somewhat more difficult method: Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
And, read this article below to see how the Adware arrived on your computer.
How to install adware
The Safari update can be found at The App Store updates section. Where are you obtaining the file? -
Since upgrading (?) to Lion my HP 3570c scanner won't operate because "power PC products are no longer supported"
Is there any way I can get a perfectly serviceable scanner (HP3570c) to work with my iMac?Is it just the HP software that's not compatible, rather than the scanner itself?
A couple of things you could try that may work. Launch Image Capture in the Applications folder and see if that recognises your scanner. If that draws a blank, you could try downloading VueScan from www.hamrick.com and see if that works. If does, you'll need to buy a licence to make it fully functional. -
After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
Help!Mark,
Sorry...
I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
My apologies and please ingnore those parts of my last post relating to the PPC Macs...
You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer) but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
If the Logic Pro App is in your applications folder..
Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
Run Logic
Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers... -
I'm trying to install CS2 on a mac OS X version 10.9.4. When I try to open the installer file I get a message "You can't open the application Adobe Installer because PowerPC applications are no longer supported. Does anyone know what I should do?
It means what it says - it's not compatible with modern Macs. You need to buy a current version.
Mylenium -
I downloaded Maverick X 9.2 on my Mac Air. I get this error message: "You can't open the application "microsoft Word" because PowerPC applications are no longer supported." Help?
QUESTION: Were you induced to upgrade to Mavericks after seeing this dialog box?
-
I just download mountain lion to my mac, now microsoft office suite doesn't work....it says 'you can't open the application 'microsoft word' because PowerPC applications are no longer supported. What does this mean and what do I have to do to fix it?? HELP!!
Install Snow Leopard on another boot partition, or upgrade Microsoft Office to a newer version, or use any number of better alternatives. Some of them are free.
Consider
LibreOffice (donation-supported)
NeoOffice ($10)
OpenOffice (completely free)
In addition to the above I also recommend Apple's Pages ($19.99). I use OpenOffice and Pages and have been completely Microsoft - free for over a year now. Life is better without Microsoft. -
I am trying to install Final cut pro 5 studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported. My computer is New. Is their a link I can go to get tech support?
You won't find any help at tech support ... other than telling you the facts: Intel processor Macs require FCP 5.1 or higher. FCP 5.0 and earlier were written for PowerPC processor Macs, long before Apple switched to using Intel processors.
And then there's the issue of the OS. OS 7 will allow FCP 7 (and sometimes even FCP 6) to work OK, but versions earlier than that have spotty operation on Lion.
Here's a brief history of full FCP versions and recommended OS compatibility:
* = requires PPC ** = works with both PPC and Intel *** = require Intel
FCP 1.0* OS 9
FCP 2.0* OS 9
FCP 3.0* OS 9, OS 10.1, OS 10.2
FCP 4.0* OS 10.2, 10.3
FCP 4.5* OS 10.3
FCP 5.0* OS 10.3 (OS 10.4?)
FCP 5.1** OS 10.4, 10.5
FCP 6.0** OS 10.4, 10.5, 10.6 (OS 10.7?)
FCP 7.0*** OS 10.6, OS 10.7
FCP-X*** OS 10.6, OS 10.7
Essentially, you have a newer Intel processor Mac with a new OS and very old, incompatible software. You might be able to find a used version of Final Cut Studio 3 on sites like ebay or craigslist as it is no longer offered by Apple as an upgrade.
Alternatively, you could purchase and download FCP-X, but it is an entirely different application, sharing virtually nothing with previous versions of FCP.
-DH -
What does "You can't open the application "Setup QuarkXPress6.1" because power PC applications are no longer supported" mean? I am trying to install an old version of Quark on my 2010 Macbook pro.
jennyba wrote:
What does "You can't open the application "Setup QuarkXPress6.1" because power PC applications are no longer supported" mean? I am trying to install an old version of Quark on my 2010 Macbook pro.
As has been mentioned, the software in Mac OS X that supported the running of PPC applications rather than current Intel applications on Intel computers such as your MBP was last seen in Snow Leopard. However, since I believe your MBP originally came with Snow Leopard, you may be able to boot from the DVD's that came with the computer and install it on an external HD and try to install Quark on that.
I think a better solution would be to buy Snow Leopard Server from Apple by phone (800-692-7753 and be specific about wanting part # MC588Z/A), installing it as a virtual machine in software like VMware Fusion, and then installing Quark 6 in that. You'll still need a license number to authorize the Quark installation. -
I am running Lion (OS X 10.7.4) and trying to reinstall iLife06, a .mpkg file, using Installer.app. I get a message "You can't open the application iLife06.mpkg because PowerPC apps are no longer supported." Is there a work around?? Thanks in advance for any help that can be provided.
The only workaround would be to purchase the current version of iLife apps from the App Store.
Lion doesn't support the old PowerPC architecture anymore, which is what iLife '06 was written for.
If the internal apps are universal, right-click on the mpkg and choose Show Contents. Then, dig through and run the specific installer package for each application. -
Im getting a constant error message: "you can't open the application PACE because PowerPC applications are no longer supported". I cant find PACE to delete it?
PACE is a rather crappy copy protection software used by the following;
Antares
Melodyne
Cycling 74 Max/MSP/Jitter
iZotope oZone
Line6 POD Farm
McDSP plug-ins (some software purchases include a green iLok key)
MOTU
Overloud
Pro Tools
Serato
Virtually all Digidesign (RTAS and TDM) plug-ins
Virtually all Waves Products
So if you have any of there, they might be the cause of your problems.
Allan -
New MacPro 10.9.4 purchased three weeks ago included Keynote. App worked fine. New update for Keynote was released August 21. Just downloaded the 6.2.2 update. Tried to launch app and now get error message "You can’t open the application “Keynote.app” because PowerPC applications are no longer supported." Confused as to why it worked prior to update. Nothing else has changed. No issues with recent iMovie, Pages or Numbers updates. Any ideas?
I tested this:
Reinstalled Aperture 3.1 from the Trial Installer.
In some way it seems to be working. But the whole thing is a scary Chimera.
It can create an Aperture library. I can import and edit images, even in Graphic Converter ias an external editor.
But the Media Browser does not show the aperture Library that I created.
The versioning is inconsistent. The library appears as an Aperture 3.4 library in the Finder. Aperture 3.5 seems to be able to read this library and to upgrade it to 3.5
The Applications folder is showing the application as version 3.4 and as compatible. Spotlight is showing it as illegal.
When opening the chimera Aperture, I see plenty of warnings in the Console window:
An Aperture "Hang" report
xpcproxy assertion failed
com.apple.IconServiceAgent: main failed to composite image
quicklookd: Warning
and more ... the hang was critical. I had to force quit Aperture more than once.
So be careful. I would not trust any important Aperture library to this patched application, without testing thoroughly. Be careful with your precious photos.
Maybe you are looking for
-
Animated video shows up fine on YouTube but not after DW upload to mobile format.
I have a problem with playing a video on my smart phone. When I play the YouTube version - https://www.youtube.com/watch?v=vFf3XwovPQg - on the smart phone the first page of my video (which is animated) shows up immediately but when I try the same v
-
How to make CompactRIO truly standalone?
Hi, I am new to cRIO and I am using it for motion control. What do we need to do to make cRIO run as a standalone system? That is, my motion control system can run with just the cRIO (or perhaps together with an extra external control panel for monit
-
ME22N Hide/Disable - Service : Attachment List - New - Create Attachment
Hi, My requirement is to hide/disable the CREATE ATTACHMENT in ME22N. Users were able to see Create attachment button through Service : Attachment List - > New -> Create Attachment, i need to hide/ disable this , so that they will not upload any att
-
Redetermination for partner no. in sales item
Hi all, When I change a partner no. (e.g. Payer) in the sales document header > partners, the same partner function "Payer" in all the sale items could be redetermined and follow the one in the header. For a customized partner function, how could I f
-
I need to download Adobe flash player to Windo ws 7. I need to have Internet Explorer. I only can find IE64 or