I am trying to set up my outlook 2007 account on i pad and the process sticks on verifying. It would appear to be a problem with outgoing server and I have changed the port number but with no success.

I have just purchased an i pad 2 and am having trouble with the e-mail set up. Set up with wi-fi, i-cloud etc has worked fine but the i pad is recognising my outlook 2007 account details but is not verifying it. The trouble appears to be with the outgoing server and I have tried changing the port number, but to no avail! Also reset the account settings for holding messages on the server...help! As you can tell I'm not very techy and I'm desperate to get the bloody thing working as I'm going away on Tuesday! Any suggestions?

I had a similar issue and it was password case sensitive issue

Similar Messages

I have change my phone number, but in settings, it still has my old number!

i have change my phone number, but in settings, it still has my old number

https://discussions.apple.com/message/16552107#16552107

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

VISIO 2013 with erlier vss stencils (I have changed the trust on them)

Hi guys I hope somebody can help me here because I am almost giving up and going back to Visio 2010! :(
My problem:
I have a lot of Visio Stencils from HP,Microsoft,Cisco,etc.. (Visiocafe and Microsoft own defaults) and after I have upgraded my Visio 2010 to Visio 2013 and after I have trusted it to open/save Visio 2003+ binary I could no longer used it!
I can see the shapes images and colors on the stencil pane on the left side, mas as soon that I drag the shape to the document the shape becames a empty square/rectangle with a CROSS and sametimes I even loose the ability to drag it around the document (normally
changing theme do that).
Do anyone have the same problem or its just me?
Thanks in advanced for any help you can give
I hope these images are selfexplanatory of my problem :)

John,
I'm not a visio expert, can you explain exactly what you mean with "masters"?
The "badly behaved" shapes all came from the "Exchange Conector" stencil that is open in the 1st snapshot (as an example because all the "old" stencils have more or less the same behavior).
That is the problem, the 1st snapshot shows at the left the stencil were I have dragged the shapes from (Exchaneg Connector) but even when they display correctly in this stencil preview, as soon as they are dragged to the document they appear badly.
The 2nd snapshot is, as you said, the document stencil were we can see the "badly behaved" shapes that were added to the document from the "Exchange Connector" and the "well behaved" shapes that were added from the "default"
visio 2013 stencils.
Thanks for the reply and best regards.
Yours truly

My apple id is shared with two younger siblings, they have changed the security questions and i do not know the verification email address and i can't change it. what do i do?

i do not know what the email that contains the answers to my security setting are going to... i just put itunes creditgs on my apple id. now i'm unable to purchase anything without the answers. ugh. help

You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(93221)

Compatibility issue with outgoing server; they suggest downloading Thunderbird. Any suggestions?

My internet provider says there is a compatibility issue with outgoing server and suggest downloading Thunderbird. Any comments?

Not without some details from you.
What version of OSX
Who is the mail provider
If not iCloud mail what type is it (POP or Imap)
That's a start.

My IMac has stopped seeing the keyboard. I have changed the batteries and the green light comes on saying it is looking to pair with the IMac but without success. I am left with the IMac switched on and I am unable to enter a password.

I have been using my IMac without a problem when I left it and went back to enter the password the IMac did not see the keyboard. I have changed the batteries and the green light comes up on the keyboard and then starts to flash indicating it is looking for the IMac but nothing happens. I have tried another set of new batteries with the same result. Is there any known problems in this area. The IMac is 5 months old.
Thank you for any help

What operating system does your iMac have? (please always post your operating system to prevent confustion).
If it's pre-Lion you will have to set Mail up manually:
Entering iCloud email settings manually in Snow Leopard or Leopard
Entering iCloud email settings manually in Tiger

I have tried to intall firebox 8 several but windows vista is causing problem with password.I am administrator but it does accept the password when I try to install it i have changed the password but the problem remains.Please help

I am using firefox from several years but recently the vista business op sytem does allow me to proceed.It comes with user or password is not right.I have changed the password and still the same problem.I have downloaded latest version 2 times,tried to insstall it but OPs does not accept the password.I am the administrator and the same password is used to intall it but without any luck

You can not setup a new iCloud account using a PC. You must use an Apple device (Mac or iPhone/iPad) to create the account, then sign into it using your PC.

HT1694 I'm having a lot of problems with the hotmail account, regularly is indicating an error in the server, that I have to introduce the password again that late that this is wrong. I have changed the password making this shorter but it does not work.

I'm having a lot of problems with the hotmail account, regularly is indicating an error in the server, that I have to introduce the password again that late that this is wrong. I have changed the password making this shorter but it does not work.

bump? Is bumping allowed? Lol.
I just really need some help here.

How do I get rid of Bing and adware on my macbook? I have changed the preferences on Safari to google, and tried to download an adware remover, but things are now worse!

Hi can anyone help me to get rid of Bing and all sorts of Adware on my macbook which arrive everytime I use Safari? I have changed the Safari preferences but Bing won't go away, and worse, it comes up with adverts. I also seem to be losing things I do want - like VLC player- its creepy

There is no need to download anything to solve this problem.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
If you find Apple's instructions too hard to follow, ask for an alternative that doesn't require you to trust a black-box application without knowing what it does.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

I have changed my Apple password, but still receive the message that my account is disabled?

I have changed my Apple password, but still receive the message "you account is disabled" when trying to make purchase with iTunes and App Store?

Contact iTunes support by clicking on support at the top of this forum and then select iTunes and then contact us on the bottom left.

Can I change JNDI port number?

Does anyone know where to change JNDI port number.
Currently, (it seems) relies on weblogic.system.listenPort property
which is the same for HTTP and JNDI. We would like to use separate ports for
HTTP and JNDI server.
Thank you
-Mik

In article <39fb0341$[email protected]>, [email protected] says...
Does anyone know where to change JNDI port number.
Currently, (it seems) relies on weblogic.system.listenPort property
which is the same for HTTP and JNDI. We would like to use separate ports for
HTTP and JNDI server.
Thank you
-Mik
You don't. WebLogic is a "complete services" application server which
means it is listening at its 'listenPort' for all service requests. I'd
love for the ability to split off ports, and this may be the case in
6.0. In <6.0, however, you're stuck with two ports: the SSL port and
the normal port.
Jesse

Change WOL Port number for clients

Hi All
We want to implement in our environment WOL functionality , for WSUS deployment and scheduled OSD deployments
We cannot unfortunately implement the default UDP port 9
My question is how can we change that default port on the clients?
I know that we can change the port on the primary server -> Site configuration -> Sites -> Properties primary site server -> tab
Port and here we can change the port number of Wake on Lan
For the client I noticed that there is a client setting -> Power Management -> Wake on Lan port Number (UDP) but that number is grayed out and set to 9
Also when I create a custom Client Setting that port number is grayed out and set to 9
How can I change that port number for the client?
Thx in advance
Regards,
Johan

The port number in Client Settings/Power Management is grayed out because "Enable wake-up proxy" is disabled. When you enable it, it becomes available. Be aware that wake-up proxy and wake on lan is 2 different things. (Beware mac address flapping)
To change the Wake On Lan port go to, primary server -> Site configuration -> Sites -> Properties
primary site server -> tab Port.
Wake On LAN port number (UDP)
For System Center 2012 Configuration Manager SP1 and System Center 2012 R2 Configuration Manager only:
Keep the default value of 9, unless you have changed the Wake On LAN (UDP) port number in the site Properties, Ports tab.
Important
This number must match the number in the site Properties. If you change this number in one place, it does not automatically update in the other place.
Benoit Lecours | Blog: System Center Dudes

My 4-year old AirPort Extreme intermittently drops out (no signal to my iMac Book). The laptop shows reception of other nearby Wi-Fi transmitters, but not mine. I have changed the bands, but the problem comes back. Transmitter problem or interference?

My 4-year old AirPort Extreme intermittently drops out (no signal to my iMac Book). My hard-wired iMac still has internet capability. The laptop shows reception of other nearby Wi-Fi transmitters, but not mine. I have changed the bands back and forth, but the problem comes back. How can I check if it is a transmitter problem or interference?

Let me see if I can suggest a strategy.
I have talked with my ISP and he said that I am not the only one with an Airport Extreme with the same issue. He said to try to write the DNS direclty, rather than using the Auto settings - still nothing works.
What modem do you have and what sort of broadband?
What mode is the AE in.. router or bridge?
I have an Airport Express from 2010. Since about a month and definetly since yesterday, I cannot connect any device via Wifi to it although LAN connection works correctly.
Is this express or extreme.. the rest of the post you refer to extreme.
What is the actual model number of the AE? A1xxx from the base or the part number MCxxx from the box.
If the AE is bridge.. I want you to try a different method.. put it in router mode.. don't worry about double NAT but ensure the IP range of the modem /router is different to the AE.. so if one is 192.168.x.x then the AE on default at 10.x.x.x is fine.. if the main router is 10.x then move the AE to 192.168.x.x
Make sure the guest wireless is off.
Using a 5.6 utility on your 10.6.8 OS mini go to the log and see if the wireless is registering..
You should see lists of wireless connection like..
Post as many screenshots of the setup as you can.. it helps loads.
IPv6 is starting to become a pain.. try it off and try local link and try auto.. in the computer.

I have changed my email to ******* but itunes says "enter the apple ID password for ******* ?

I have changed my email address but itunes on the phone only sees the old address wich is no longer viable?
<Personal Information Edited by Host>

To do what, update apps? If that is the case, understand that apps are locked to the Apple ID used to purchase them. It cannot be changed and they cannot be merged to another account. If you are just trying to log into the iTunes store, then sign out first, and then sign in with the new one. Just remember what I said about updating apps.

I am trying to set up my outlook 2007 account on i pad and the process sticks on verifying. It would appear to be a problem with outgoing server and I have changed the port number but with no success.

Similar Messages

Maybe you are looking for