I am trying to set up two monitors on my Pavilion 6330f PC system 7 but doesn't identify DVI

Product name Pavilion 6330f PC System 7
I've tried to connect two monitors but it does not identify the VGA monitor connecte to the DVI port with an adaptor called aDVI-A M to SVGAf Adaptor. When I go to the Control Panel >type in Monitors> click on multiple monitors, it only identifies the VGA connected. How do I use multiple monitors without adding another video card?

Hi,
The problem could be on the adapter, you need a converter because DVI to VGA is from digital to analog. An adpater alone can't do this work.
Hope this makes sense.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • I AM TRYING TO HOOK UP TWO MONITORS AT THE SAME TIME

    I AM TRYING TO HOOK UP TWO MONITORS AT THE SAME TIME. I have had no success in figuring out why I can get an image on my TV and an image on my monitor (at the same time), but no icons, no start menu and no keyboard access. M y computer freezes as well when I try to do 2 monitors.

    Hi,
    Your machine has:
    *Integrated video is not available if a graphics card is installed.
    Radeon HD 6370D, 6410D, 6530D or 6550D Graphics (model dependent based on processor)
    Supports PCI Express x16 graphics cards
    Two DVI-D ports (Both ports can be used at the same time)
    You can use TWO monitors with the right connections for two ports #3 above. You can get more information from the following instructions:
       http://www.dummies.com/how-to/content/how-to-set-up-multiple-monitors-with-windows-7.html
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT1751 I foolishly tried to set up two libraries for two diff. ipods. Now my original library is changed and all the music I purchased is not listing.   In purchased I see 906 songs - but I cannot get them to show up as a list - is there help out there?

    I tried to set up two libaries so my two ipods could sync different kinds of music. This wiped out my original Itunes - I have been trying to get it back to the way it was.  I have is backed up on Simple Save but do not want to plug that aback in since I am afraid it will then take up the new situation instead of allowing me to put the data on simple save back to the computer for Itunes.   I want to show my 908 songs that I have purchased and I cannot seem to do this... It shows in purchased= as 0-8 - but I cannot get them to list.   What am I doing wrong.  I know I should have left it alone and never attempted something I know nothing about~  Thanks

    I tried to set up two libaries so my two ipods could sync different kinds of music. This wiped out my original Itunes - I have been trying to get it back to the way it was.  I have is backed up on Simple Save but do not want to plug that aback in since I am afraid it will then take up the new situation instead of allowing me to put the data on simple save back to the computer for Itunes.   I want to show my 908 songs that I have purchased and I cannot seem to do this... It shows in purchased= as 0-8 - but I cannot get them to list.   What am I doing wrong.  I know I should have left it alone and never attempted something I know nothing about~  Thanks

  • I am trying to set up two-factor authentication but none of my devices appear listed.

    I am trying to set up two-factor authentication but none of my devices appear listed. I am only given an option to add an SMS-enabled device. When I do this, I receive an SMS with a code, but have no way to continue in the browser. I have enabled find my iPhone on at least one device, and can see all my devices in the find-my-iPhone app. Am I missing something?

    As a check, this page walks you through the process:
    http://technofyi.com/2013/03/21/how-to-enable-apples-two-step-verification-featu re/
    His step 6 shows the 'Step 1 of 4' page where you should click 'Add an SMS-capable phone number'.
    His step 7 shows the 'Add a phone number' window where you can enter the phone number and click 'Next'. The phone should then receive the code by SMS.
    His step 8 shows the 'Verify Device' window which should appear automatically in which you can enter the code.
    Are you not seeing the window in step 8? if this is not popping up automatically then something is going wrong: you could try clearing your browser's cache and trying again. If it still won't work you may have to contact Support: Go to https://getsupport.apple.com ; click 'See all products and services', then ' 'iTunes', and then 'iTunes Store', then 'Account Management' then 'Apple ID account security' - this seems to be the nearest relevant option.

  • Connect two monitors to a Pavilion dv6t-2300 laptop (Windows 7 64)?

    What type of connector do I use to use two monitors with my Pavilion DV6t-2300?

    Hi,
    Read this..
    http://www.tech-faq.com/how-to-connect-multiple-monitors-to-your-laptop.html
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • HT2731 I am trying to set up an IPad with an Apple account already in use but it will not let me put it on this Ipad.  What do I need to do?

    I am trying to set up an IPad with an Apple account already in use but it will not let me do so. What do I ned to do so i can have Apple ID on Ipad and other items?

    Hi,
    Yes you can contact Apple UK at daytime, for free, in the Chat.
    Just go to the iPad page, then press buy now in the upper right corner, and then in the upper right corner you will see the phone number, and next to it,(only at daytime) you will see a button, writing something like contact else, I don't really know what is the exact label, but it works.
    Good luck

  • TS2976 i am trying to set up two email accounts for outlook, one for me and one for my husband.  Does anyone know how to do this?

    I am trying to set up icloud emails on outlook 2010.  It only lets me add 1 email rather than two.  One is for me and one for my husband.

    Maybe you should ask on a Microsoft forum rather than one dedicated to the using the iPhone in an enterprise environment.

  • I want to set up two monitors but be able to view different programs on each one how do i do that

    i have two monitors hooked up to my desktop but want to view different programs on each one how do i do it

    Chipper, welcome to the forum.
    When requesting help, you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Trying to set up two POP accounts - won't work

    Hi there,
    I am trying to set up a second Yahoo account on Mail. It shares the same incoming and outgoing server as my original account I use through Mail. But the user name is different. I can't log in with this new email address. It keeps throwing up the message:
    'trying to log into the POP server "pop.mail.yahoo.com.au" has failed. Please make sure the username and password are correct. If you continue, you may not be able to receive any mail.'
    This IS true, if I continue with the set up of this account, I'm not able to receive any incoming mail.
    I have tried this countless times. I DEFINITELY have the right username and password for this second account.
    Is it not possible to set up another POP account with a different user name but the same server name?

    What targeting the Mail.app preference file, do the following:
    Quit the Mail.app first and using the Finder, go to Home > Library > Mail. Copy the Mail folder and place the copy on the Desktop for backup purposes.
    Using the Finder, go to Home > Library > Preferences > com.apple.mail.plist. Move the com.apple.mail.plist file to the Desktop.
    Note: Moving the com.apple.mail.plist file out of the Preferences folder will require re-entering all email account information when re-launching Mail.
    The only exception to this is if you have a .Mac account which will be recreated automatically and/or if you created an email account as part of the computer setup assistant when first turning on the computer when new.
    Launch Mail and decline any prompt to import mailboxes. After re-entering all email account information, the Mail.app should rediscover the existing account named folders and mailbox files at Home > Library > Mail.
    After confirming all mailboxes were successfully rediscovered, you can delete the copy of the Mail folder and old com.apple.mail.plist file from the Desktop.
    Test if this resolves the problem.

  • Trying to set up new phone with iCloud. My backup shows up but not in bold so it won't let me select it. Any ideas??

    Trying to set up my new iphone. Saved my info from iCloud and when I try to download on the 5c it is not in Bold so it won't let me select it but it does show my backup at 4:09. Any ideas??

    Make sure your 5c is running the same or higher version of iOS as the one you backed up.  If it isn't you cannot restore the backup until you update the phone.  Then make sure you are restoring the backup this way: https://support.apple.com/kb/ph12521.
    You phone won't need to be from the same provider or have the same telephone number to use the backup, but you will need to be signed into the iCloud account that you backed up your old phone to.

  • Trying to set up Apple TV I get to the activating screen and it doesn't go any further. What do I do?

    Help trying to set up Apple TV and it gets to the activating screen and goes no further. What do I do?

    did the google for you
    https://discussions.apple.com/thread/3113685?start=0&tstart=0
    more hits
    https://www.google.dk/search?source=ig&hl=da&rlz=1G1TSEH_ENDK367&q=appletv+error +message+5506&oq=appletv+error+message+5506&gs_l=igoogle.3...296887.300666.0.301 334.9.9.0.0.0.0.108.669.8j1.9.0...0.0...1ac.1.GcaJvzEoeFU

  • I tried to set up two users on one computer, now I can't make iTunes match work for either.

    Lots of people seem to be having multiples user problems on iTunes, but I can't find a solution to mine so please help.
    I got a new iMac.  Switched it on.  Connected to iTunes Match - all fine and dandy.
    After a couple of weeks I decided I should follow Apple's advice and set up a separate user account on the imac for my wife.  I connected to iTunes match using her user name and down loaded a bunch of her favourite music. 
    Naive fool that I was, I didn't realise I had fallen into Apple's moronic multi-user trap. Only one user on one computer can use it????  Why???
    I thought that it was me being stupid so I switched everything off - including iTunes Match.  Now nothing works.
    If I log on with my iTunes ID and try to switch on iTunes Match it asks me if I want to add this computer, and then gives me the "This computer is already associated with an Apple ID - you can't use it for 90 days" message.
    If I use my wife's iTunes ID, it asks her if she would like to subscribe for £21.99 a year.
    The exact same thing happens whether I sign into the computer itself with my account or hers. 
    This is awe inspringly annoying.  Please tell me how to fix this.
    thanks.

    At this time there is no "solution." You'll simply have to wait the 90 days to re-enable iTunes Match.
    For now here is my suggestion. In your User Account, in OS X, sign out of whatever iTunes Store account you are signed in with. Then sign in with your store account and leave it at that. Now sign out of your OS X User Account, sign into your wife's OS X User Account and sign into the iTunes Store with her Apple ID (if necessary sign out of the account first).
    Now, you can go back to your OS X User Account and attempt to enable iTunes Match. You will probably get the "wait 90 days" message. If so leave it, mark your calendar, and wait for the 90 days to expire. You can try contacting iTunes Store support at <https://expresslane.apple.com> if you wish, but I really do not know how useful that will be.
    Incidentally, you get the message to pay for the service when trying to enable it on your wife's Apple ID because the service has not been purchased using that Apple ID. iTunes Match is designed to be a single-user service that is never signed out of and is associated with one, and only one, Apple ID and a regional store.

  • Trying to set up an out of the box SP 2010 approval workflow that doesn't generate warnings or errors

    I have a custom list for which I want an approval workflow.  There is only going to be one stop for the approval - creating an item is a request to a person for a new code to be created. 
    If I do not turn on content approval, then I get the message:
    The workflow could not set content approval status. Enable content moderation for this list and run the workflow again.
    When I turn on content approval, then when the users go to the custom list to create an item, they see this message:
    Items on this list require content approval. Your submission will not appear in public views until approved by someone with proper rights.
    Surely I am missing something obvious. I just want a standard SP 2010 form without warnings to gather info from the user, then to create a workflow task that sends a person an email that they need to approve or reject the request.
    The second message is going to cause questions from the users. The person who has to approve the tasks wants to be able to see what requests are awaiting approval vs approved vs rejected.
    Is this something that is not doable in SP 2010?

    the "Approval Process" step is designed for manipulating the "Moderation Status" (Content Approval status) of a list item... What you are seeing is DESIGNED behavior.
    When Content Approval is enabled, content changes are not made public until they have been approved. The Approval workflow sends the email to a manager, who is supposed to approve or reject the change.
    If Content Approval is DISABLED, there is no point to the workflow.
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • Hetis 865GV video output to two monitors

    Does anyone know how to set the Hetis 865GV to output simultaneously to the VGA port and to either DVI or S-Video to display the same output on two monitors?

    well i dont have an 865 , but that is handled by my video card.
    try reading up in the features of that, using a short alt f something key to turn on 2nd display. may have to set it up under video card propertes, an click a check box under tv.

  • Setting up two machines for core dump

    Hi, I'm trying to set up two Macs to collect a Core Dump after a Kernel Panic.
    A MacBook Pro 3,1 triggers a kernel panic when Mavericks is installed, and either Ethernet or WiFi connections are changed.  No diagnostic reports get generated at /Library/Logs/DiagnosticReports.
    I have been reading on how to set up a core dump over FireWire, since Ethernet seems to be compromised. I'm able to do a core dump by triggering a kernel panic with DTrace. The Development Machine receives and stores the core dump correctly.  However if a kernel panic occurs when WiFi is switched off, the Core Dump does not take place, and I don't know if it should work as the DTrace trigger does.
    I have System 10.9.1 on both Target and Development machines. The machines are each other connected with a FireWire 800 cable and a ThuderBolt adapter, since Development machine lacks the FireWire port (It's a MacBook Pro retina).
    - Target machine is connected to my WiFi network and is also connected to the Ethernet network.  The FireWire 800 port is manually set to IP 10.0.1.127
    - Development machine is connected to my WiFi network. The FireWire 800 cable coming from the Target machine connects to a ThunderBolt adapter and the port is manually set to IP 10.0.1.128
    - On the Target machine (MacBook Pro 3,1) I've set
    sudo nvram boot-args="debug=0xd46 _panicd_ip=10.0.1.128 kdp_match_name = firewire"
    - On the Development machine (MacBook Pro retina)
    sudo mkdir /PanicDumps
    sudo chown root:wheel /PanicDumps
    sudo chmod 1777 /PanicDumps
    sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.kdumpd.plist
    - verified that the core dump server is working with
    sudo launchctl list | grep kdump
    - after connecting the FireWire cable to the Macs
    run fwkdp
    - and machine responds with:
    FireWire KDP Tool (v1.6)
    KDP Proxy and CoreDump-Receive dual mode active.
    Use 'localhost' as the KDP target in gdb.
    Ready.
    As mentioned above, triggering a Core Dump with DTrace works just fine.
    Turning WiFi Off causes a Kernel Panic, Target machine freezes immediatedly and nothing happens on Development machine.
    Forcing power off on Target machine and restarting shows no logs on Console.
    I've read very little on GDB and it seems hard to find information, at least on what I'm doing. I'm not trying to debug a kernel extension.
    nvram -p dumps mostly jibberish on the terminal screen
    I'm tempted on setting up the core dump with Ethernet, but hesitate since WiFi and Ethernet seem to block the system abruptly.
    Can someone illuminate me please?
    Thanks in advance and best regards,
    Guido

    Thank you Ian, however, when I click this option, my library looses all of its preferences/user presets?? I am confused
    They aren't lost, instead they have been left outside the catalog because they preceded the change.
    You can drag the contents of your Lightroom presets folder into the Lightroom Settings folder within Lightroom catalog folder and the application will then see them after relaunch. This is by far the quickest and easiest way of copying existing presets to the central catalog. Follow these steps:
    Step 1 - Open you original catalog
    Step 2 - Open Lightroom Preferences and choose the Presets tab
    Step 3 - Make sure that Store presets with catalog is unchecked
    Step 4 - Hit the Show Lightroom Presets Folder... button.
    The presets folder will see multiple sub-folders which contain your existing
    Step 5 - Open the folder with the moved catalog (i.e. the version you put on the external disk)
    Step 6 - Open the folder named Lightroom Settings
    Step 7 - Delete it's contents
    Step 8 - Drag the contents of the folder you opened in step 4 in to the Lightroom Settings folder that you opened in Step 6
    Step 9 - Launch the moved catalog as described in my previous post (i.e. double click it)
    If you did everything correctly the catalog will now have access to your presets

Maybe you are looking for