I am trying to set up weekly time restrictions to the internet

My apologies for posting here as I know it's not a Safari issue... but I could not really find the right place for this question.
What I need to do is an extension of Parental Controls.  The main difference is I want to do WEEKLY time allocation/restrictions, not daily.  I want to give the kids (for exmaple) 10 hours a week for internet access.  I will set blocks of time up that will bar access from 11PM until 7 AM but within the open time, they will have 10 hours. Once that 10 hours is used, they are locked out.
There are several tools that seem to do variations of this, mainly limit the # of hours per day.... this will not work.  I have looked at Content Barrier, NetNanny Safe, Eyes, and a few others... There are a couple on the Windows side but they do not have a Mac version.
Does anyone know a product or solution I can try for this scenario?
Thanks very much

Hi..
Not sure if this is exactly what you are looking for but Chris Breen's article from MacWorld may offer some ideas for you.
How to share one Mac with your family

Similar Messages

  • How can I set up my time capsule as the primary base station with a centurylink router? I'm trying to extend my coverage, increase signal strength, and be able to connect a printer.

    I recently moved and now I'm trying to set up my Time Capsule as the primary base station or router with an existing network that has a Centurylink modem/router. The TC still has the settings for my old network. I also have backups on it. I have the data backed up to another HD so it's not an issue to return it to factory settings if doing so deletes the back ups. Do I need to restore it to the factory settings to set it up? Also, what settings would I select on the TC (and the Centurylink modem/router) in order for the TC to serve as the router, instead of the Centurylink router? I want to be able to use the TC to back up my Mac's, print wirelessly, and improve overall performance. I tried setting the TC up and ended with 2 different networks. Can anyone please help me with this?

    The TC has to plug into the existing modem router by ethernet.. you cannot use wireless.
    You have a choice of which is router.. only if Centurylink agree to bridge their modem router.. this has to be done by the ISP and often they do not allow it.
    Is your broadband cable or adsl or fibre or ???
    If it is cable and you are allowed to purchase your own cable modem pick a pure modem version with no router in it.. plug the TC into it by ethernet.
    Setup the TC in DHCP and NAT mode.. (depending on broadband type).
    You must reset the TC to factory to do the setup.. no files are lost at all.
    Here is my current recommended setup.. with Yosemite life has become harder than ever.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
    This user has had success and a few others as well.
    RáNdÓm GéÉzÁ
    Here is why Yosemite has fundamental issues.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • When trying to set up my time machine I get this message:  Airport Utility was unable to find any airport wireless devices.  I am connected to the internet.  What's the problem?

    I'm trying to set up my time capsule.  I'm having trouble. Please help

    Hi Angela,
    Had (and having) the same issue from Windows 7 on my TimeCapsule (TC) ..... Not sure how to fix it but I have a workaround:
    1) Make sure you are getting your internet connectivity from the TC instead of your ISP's modem (turn off wifi on the ISP's modem)
    2) go to windows menu and type CMD on the search box, that should get you a black screen. Type IPCONFIG and note the numbers on the Gateway (mine is 192.168.1.1)
    3) Open Airport utility and go to File > Configure other
    4) Type the Gateway from step 2 and your TC password (if you didn't change it, it should be the serial number f your TC, found on the bottom sticker)
    5) you should be able to see yout TC settings.
    Hope it helps. I had a big headache when setting TC on my Windows laptop.... (but none on my Macbook) :-)  Good luck!

  • Trying to set up my time capsule to my friends dsl modem so I can get wireless. I kept on getting message another device is using the same IP address, so I manually changed the IP address and now I have no Internet via DSL modem or wireless

    Help with trying to set up my time capsule to my friends DSL modem, so that I can get wireless while staying at his place.

    Set up your Wi-Fi network with your iPad, iPhone, iPad touch, or Mac.
    http://www.apple.com/airportexpress/features/easy-setup.html

  • Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

    Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

    Did you reboot the TC? That is always the first step.
    Reboot the whole network if that is not enough.
    If you still have issues.. come back to us but generally the best way is to factory reset the TC and start over.
    We need a bit more info on the whole network layout and what OS you are running. What model TC you have??

  • All of a sudden my ATV came up with a message stating trying to set dat and time however cannot access. Could this be due to the recent hacking of Apple or is it something new. How do I fix?

    All of a sudden my ATV came up with a message stating trying to set date and time however cannot access. Could this be due to the recent hacking of Apple or is it something new. How do I fix?

    Welcome to the Apple Community.
    It's not related to any hacking.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
        1.    Restart the Apple TV (Settings > General > Restart).
        2.    Restart the Apple TV by removing ALL the cables for 30 seconds.
        3.    Restart your router.
        4.    Reset the Apple TV (Settings > General > Reset > Reset all settings)
        5.    Restore the Apple TV (Settings > General > Reset > Restore)

  • Hi trying to set up new Time Capsule, it says I need a newer version of Airport Utility, how do I get this?

    Hi trying to set up new Time Capsule, it says I need a newer version of Airport Utility, how do I get this?

    You need to be running at least the Lion (10.7.5) operating system or higher on your Mac, or using an iPhone or iPad with AirPort Utility installed on the device to set up the Time Capsule.
    Check the System Requirements for the Time Capsule to confirm.
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3 or higher
    http://www.apple.com/airport-time-capsule/specs/

  • HT204408 When trying to log into face time I get the registering device does not have appropriate credentials, I have OSX 10.8.4 on my Mac Pro. I can log in using my IPAD

    When trying to log into face time I get the registering device does not have appropriate credentials after I sign in, I have OSX 10.8.4 on my Mac Pro. I can log into face time without a problem using my IPAD.>

    Please take each of the following steps that you haven't already tried, until the issue is reolved. If there's no resolution after Step 3, post your results.
    Step 1
    Sign out of iMessage in the Accounts tab of the preferences dialog, then sign back in.
    Step 2
    Log out of your user account and log back in.
    Step 3
    Boot in safe mode and test, then reboot as usual and test again.
    Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.

  • I'm setting up my Time Capsule for the first time and cannot get an internet connection throughWAN connection

    I'm setting up my Time Capsule for the first time and can't get an internet connection via ethernet cord

    So new AC model TC??
    What modem is it? Pure cable modem .. did you power cycle the modem ( OFF for at least 30min..)??
    This is essential to lose the old setup and start afresh. 
    How have you setup the TC?
    Did you try just bridge to existing router? If it doesn't get an IP and you just bought it, possible it is faulty.
    Lots more details.. really important things like did the ethernet connectivity leds go on.. both the TC port and the modem port - front ethernet indicator should light up..

  • HT201250 I am having trouble setting up my time capsule.  the amber light is flashing.  i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function.  I just want the Time Capsule to ba

    I am having trouble setting up my time capsule.  the amber light is flashing.  i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function.  I just want the Time Capsule to back up.

    Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
    Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you.

  • I'm having problems installing OSX update 10.9.2. Twice I have tried to install, and both times I get the message - Update could not be verified. Can anyone advise ?

    I'm having problems installing OS X update 10.9.2. Twice I have tried to install, and both times I get the message - Update could not be verified. Can anyone advise ?

    Are you updating from the App Store when you get that error message?
    If so, thry using the 10.9.2 Combo update -> http://support.apple.com/kb/DL1726.
    Good luck,
    Clinton

  • HT2534 Tried to set up my Apple ID and the none button option for Billing is not showing up, what can I do?

    Tried to set up my Apple ID and the none button option for Billing is not showing up, what can I do?

    Try this support page provided by Apple...
    http://support.apple.com/kb/ht2534

  • TA38556 I am trying to set up my apple tv using the hospital network. I am able to detect the network and chose it. But the way the system works is that you have to agree to the terms and conditions of using their network. How do I accomplish this with ap

    I am trying to set up my apple tv using the hospital network. I am able to detect the network and chose it. But the way the system works is that you have to agree to the terms and conditions of using their network before access the internet. How do I accomplish this with apple? Please help.

    There are some other options to you, if you're not at home and nobody is using your router you could set it up at the hospital, if this isn't an option you could get a second router and use it.  Many ethernet routers are available on the cheap, and ethernet cables are cheap too.
    Also, a macbook can share it's internet via the built in wifi it has.  See this go to settings-sharing-internet sharing and configure as desired.  This may require an internet connection via ethernet.  But you should be able to create a wifi network for using something like airplay/home sharing.

  • Trying to set up a linksys router but the cd says it works with OSX 10.6 and later. I am currently running the newest version of mountain lion.... what is the matter with this OSX   update needed?

    trying to set up a linksys router but the cd says it works with OSX 10.6 and later. I am currently running the newest version of mountain lion.... what is the matter with this OSX   update needed?

    Your install disk must look like this
    and not like this.
    Those gray disks are machine specific and will only work with model of Mac that they shipped with.

  • Our Century Link Modem/Router supplied at set up, has poor range. It is in the kitchen ( main level ) and won't reach our studio fully at 30-40ft away. Will setting up my time capsule i the studio improve this signal?

    Our Century Link Modem/Router supplied at set up, has poor range. It is in the kitchen ( main level ) and won't reach our studio fully at 30-40ft away. Will setting up my time capsule in the studio improve this signal? If not, what can I do!???

    Will setting up my time capsule in the studio improve this signal?
    Yes, if the Time Capsule remains connected to your Century Link modem/router using a permanent, wired Ethernet cable connection.
    Any other option will involve the purchase of more hardware.
    One option would be to keep the Time Capsule connected to the modem/router using a short Ethernet cable, and configure the Time Capsule to provide a wireless network.  Add an AirPort Express about half way between the kitchen and the studio to wirelessly extend the signal from the Time Capsule to provide a much stronger signal in the studio.
    Another option might be to use a wireless repeater that is compatible with the modem/router. Century Link might have a solution, or be able to recommend a compatible device for that purpose.

Maybe you are looking for

  • BI and ECC Reconciliation report giving blank value instead of ZERO

    Hi,   We have a report for reconciliation where in if the ECC and BI balance  matches, it will show Zero (0) in the final field. My question is *for some of them it is showing Zero(0) and for few rows it is givng blank values* even after ECC and BI b

  • No provider for Address type : rfc822

    In my workflow, after instantiating the EJBs, I send a request mail to the Manager through the WLPI workflow. Everything was going fine. But, ever since we have moved our SMTP server to a new location, (maintaining the same host name ), I have been g

  • SAP ERP 6.0 EHP7 upgrade optimal resources

    Hi,         I am performing EHP7 up gradation on SAP ERP 6.0. SYSTEM H/W: 8 CPU's   50 GB RAM OS : windows server 2008 R2 DB: oracle 11.2.0.5.0 SAP source release : ERP 6.0 SAP target release : ERP 6.0 including EHP 7      I have performed above said

  • How to customize the inner html of an af:goLink tag?

    Hi this is a two-part question and I really appreciate any advice you all can provide on either area. *#1* I need to figure out how to create a span tag inside my anchor elements being created by the master template. *#2* Below is the section of code

  • Roll back for GW 8.0.3

    Good morning, When updating to GroupWise 8.0.3, my customer raised the question/concern about roll back to the GroupWise 8.0.2 HP3 in case something goes wrong. Are there any options to do so in 8.0.3? This is a cluster environment, SLES10SP4/OES2SP3