I am trying to share 3 iCloud calendars, but I do not see any options when I click on the Share icon.

I have several calendars on my iCloud, and I want to share 3 of them with my wife. I am using Safari 6.0 on Mountain Lion (10.8), and when I go to my calendars on iCloud, I see all of the calendars listed in the left column. The three I want to share already have an active Share icon (green), although I do not recall sharing these calendars in the past.
When I click on the Share icon beside each Calendar, it shows that the calendar is shared with myself. There is NO OPTION in this window for unsharing, or adding my wife to the share, or making them a Public or Private Calendar. The only option is a check box that allows me to decide whether to receive emails alerts when something is changed.
I currently see all of my iCloud Calendars on my iPhone, iPad, and Mac Powerbook (running Mountain Lion). I share them with no one else. I have three Calendars that I do not want to share, and they have the options described in the Online Support, but the three I want to share with her give me NO OPTIONS.

I should clarify that I am using a MacBook Pro, not Powerbook (if that's the proper nomenclature).

Similar Messages

TS3999 i put a calendar event into my iPhone in my iCloud calendar, but it is not showing up in my Outlook iCloud calendar. what am i doing wrong?

I put a calendar event into my iPhone (using iCloud calendar) but it does not show up in my Outlook iCloud calendar. Any idea what i am doing wrong?

Are you sure that you put the event on your iCloud calendar? You might want to check Settings>Mail,Contacts,Calendars>Default Calendar to be sure you have selected the calendar listed under your iCloud account as your default.

I am trying to update my iphone 4 icloud but I keep getting can not connect to server when I click on the terms and conditions

I am trying to update my iphone 4 icloud but I keep getting can not connect to server when I click on the terms and conditions

" iTunes could not contact the iPhone software update server because you are not connected to the internet. Make sure your internet connention is active and try again."

HT4910 i have lost my icloud account password and i have tried a lot to get back my password through i forgot but i have not recieved any mail to my id regarding the change of password

i have lost my icloud account password and i have tried a lot to get back my password through i forgot but i have not recieved any mail to my id regarding the change of password

Check your spam mail. If you have more than one email address verified with that apple id that email will go to the rescue email.
About the rescue email address
http://support.apple.com/kb/HT5312

I have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being rec.

i have just dowloaded the icloud control panel on my PC and i am am able to see everything that has been pushed to icloud from my ipad. However i cannot see my email. i can send from the computer using icloud, but i do not see any mail that is being received by my ipad, which is set up with my mail server. What haven't i checked lol?

turn your ipad off by holding the sleep wake button for 5 seconds and slide to turn off then turn it back on and the apps should be finished and if the apps didnt finish just redownload them

My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the syst

My Aperture 2.1 has gone into a continual thumbnail mode. I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails. I tried reloading Aperture 2.1, but that did not change anything. I have also turned the system off, for a period of time, and then turning it back on, when I click on Aperture, it comes up and locks in the thumbnail mode. I can view my stored pictures, even modify them, but it still says thumbnails.
I got in this mode by trying to import "one jpeg photo", from a scanned slide using a Nikon Scan4 IS5000ED scanner. I had saved the scan to my desktop before I tried to import it.
Please Help, Maurice A Bird at [email protected]
Thanks

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

HT5787 I updated my ipad but when I went into dragonvale it no longer recognized me and made me create a new account. As a result I can no longer access my park. I have tried to go into the Game Center to restore my park but i do not have any options.

I updated my ipad but when I went into dragonvale it no longer recognized me and made me create a new account. As a result I can no longer access my park. I have tried to go into the Game Center to restore my park but i do not have any options to restore my old login/ account. Any tips?

Buying a bag of coins might help...

I am trying to configure my SCXI-1540 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?

I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
MAX says it recognizes all the cards in the chassiss.

Jeremy, Thanks for the reply.
I tried to set up the system as DAQmx.
I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
It didn't seem right that the system should behave that way, but I pressed onward.
I then tried to create a new DAQmx Task
When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
Analog>>Voltage
Analog>>Temperature
Ana
log>>Strain
Analog>>Current
Analog>>Resistance
Analog>>Frequency
Analog>>Custom Voltage with Excitation
Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
I had included the system report of what programs I am using, etc. as attached file nireport.txt
After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
Which I guess it is since both configurations are now set-up in MAX.
I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
't come up with
Analog input>>POSITION>>LVDT
When I try to create a new DAQmx task.
Thanks for the help so far! As you can probably tell I am new at this.
Ryan
Attachments:
nireport.txt ‏2 KB

When I upgraded my MacBook to Lion the trackpad switched and now up is down and down is up. I tried to fix it in setting, track pad but I do not see an option. Is it somewhere else in settings?

When I upgraded my MacBook to Lion the trackpad switched and now up is down and down is up. I tried to fix it in setting, track pad but I do not see an option. Is it somewhere else in settings?

You are very welcome...there are many little boxes to check/uncheck...can be a real challenge to read all of the fine print

We have one iPhone3s w the lates ios6. have selected iCloud backup for photos but do not see any photos when I log on to iCloud

we have one iPhone3gs w the lates ios6. have selected iCloud backup for photos but do not see any photos when I log on to iCloud. How can I get all my photos from the iPhone3GS to iCloud?

You can't see inside a backup file on icloud, thus you can't view your photos at icloud.com.

I subscribed to a photo stream in iPhoto but I'm not seeing any photos

I'm using iPhoto 9.6 on a Macbook using Yosemite. Someone shared a photostream with me. I subscribed (using Yosemite) without any errors but I'm not seeing any photos. I've confirmed with the person who created the photostream that there are photos in it (I've seen them first hand). I've had this issue before on Mavericks so . Anyone seen this before? Any idea how to solve?

Not occurring for me, but you could try this:
This solved my question by adamnash on Oct 19, 2014 6:52 PM
Solution:
I took a brute force approach:
- I quit iPhoto
- I launched Settings, went to iCloud, turned off Photo
- I launched iPhoto
- I verified that iCloud was off
- I quit iPhoto
- I went back to Settings, went to iCloud, turned on Photo
- I launched iPhoto
It's now synching all the albums, although the one I published while in this broken case seems to have now disappeared.

HT201317 My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.

My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.I reinstalled my icloud and checked if icloud sharing is ON. I can see pic in my photo stream in PC only in slide show mode. While in list mode it shows pics before i actually click on photostream folder. My phone memory is out becose of bunch of photoes. How do i copy my photostream photoes.

Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck…

Why do I get the "iwork discontinued" message when I click on the share feature in pages?

Why do I get the "iwork discontinued" message when I click on the share feature in pages?

If you are using an older version of iWorks, the sharing was, I understand discontinued in July 2012.
New versions of the iWorks suite, Pages etc now have the sharing option, introduced earlier this year.

I have installed Elements 13 on my Mac but can't see how to open it. When I click on the disk icon it takes me to an information page that gives no information about opening Elements 13.

I have installed Elements 13 on my Mac but can't see how to open it. When I click on the disk icon on the desktop it takes me to an information page that gives no information about opening Elements 13. How do I open the software so that it can be used?

Unfortunately, when I open applications, adobe photoshop elements 13 folder does not appear in the adobe folder. It appears as a disk on the desktop, only.

I have installed firefox 3.2.64. When i click on the desktop icon nothing happens. The windows task manager says mozilla firefox is running but I can't see it anywhere. What might the problem be?

Question
I have installed firefox 3.2.64. When i click on the desktop icon nothing happens. The windows task manager says mozilla firefox is running but I can't see it anywhere. What might the problem be?

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls
See also:
*http://kb.mozillazine.org/Browser_will_not_start_up

I am trying to share 3 iCloud calendars, but I do not see any options when I click on the Share icon.

Similar Messages

Maybe you are looking for