I am unable to retrieve my emails.

Hello Eric,
Thanks for the info.  I am still trying to fix it.

I did delete the email account but still no incoming emails.  Instead it's downloading thousands of emails but ONLY the junk emails were retrieved.  I want to note here that my MAIL emails is linked to Yahoo.   I am able to retrieve the emails on my Yahoo account but not on MAIL.  I checked my Doctor Connection and they are all green.  Please help.  Thanks.

Similar Messages

  • I suddenly am unable to retrieve my emails.  I discussed this with my Internet provider, but still get an error message and can't access my emails.  Any suggestions???

    I am unable to retrieve my emails since yesterday.  I called Time Warner Cable, my Internet provider, but they could not help me; they stated that the settings had changed, since they were upgrading.  I adjusted the settings, but still get an error message: 
              Alert
              There may be a problem with the mail server or network.  Verify the settings for account "Mail 1" or try again.
              The server returned the error:  The connection to the server "smtp.roadrunner.com" on port 110 timed out.
    I changed the server, and the port, as Time Warner Cable tech rep recommended, but to no avail.  They recommended I delete my current email account and recreate it, but that I check with Apple first, because I might lose my contact list (and any email messages I'd previously saved!?).  They suggested Apple might be able to tell me how to not lose the contacts, emails, profile.
    Any help would be appreciated. 

    Hi, what Interface are you using, & which one are you checking?
    Each Interface will have it's own settings.
    Though all of these steps may or may not be needed, I'm including them all.
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • Unable to retrieve tiscali email using firefox 5

    whenever i log on to www.tiscali.co.uk to retrieve my email it says i have undefined email in my box.however using internet explorer i can see how many emails i have and open them.this has only started since using firefox 5

    From where?

  • Please help me..... I am still unable to retrieve my emails.  It said that my password is in correct.  I kept changing it and the old password appears.  It doesn't seem to change to the new password.  Is my MAC hacked??

    I still have problems with retrieving my emails.  It does not take my new password despite inputting it many times.
    Is my Mac hacked??  Please help!!!

    I did delete the email account but still no incoming emails.  Instead it's downloading thousands of emails but ONLY the junk emails were retrieved.  I want to note here that my MAIL emails is linked to Yahoo.   I am able to retrieve the emails on my Yahoo account but not on MAIL.  I checked my Doctor Connection and they are all green.  Please help.  Thanks.

  • I have been unable to retrieve emails from my external disk.  I entered the Time Machine and tried to go to April 2013, but could not find emails.  I have Lion OS X 10.7.5 .Thanks!

    I have been unable to retrieve emails from my external disk.  I entered the Time Machine and tried to go to April 2013, but could not find emails.  I have Lion OS X 10.7.5 .Thanks!
    Cecilia

    I have been unable to retrieve emails from my external disk.  I entered the Time Machine and tried to go to April 2013, but could not find emails.  I have Lion OS X 10.7.5 .Thanks!
    Cecilia

  • HT201363 Iwould like to change my email due to the fact I am unable to retrieve the information need to verify

    i am unable to use the email i have set up to verifly my account

    Hello, K4rla223. 
    Thank you for visiting Apple Support Communities.
    Try the steps in the article below to resend the verification email.  Make sure to check your email spam folders for this link.  You may have to access your spam folder via a web browser on a computer.
    Associating and verifying email addresses with your Apple ID
    http://support.apple.com/kb/HE68
    If you are still experiencing issues you may need to reach out to our account security team to help you with verifying your account.
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Cheers,
    Jason H.

  • Unable to retrieve email

    I have had my ipad about 18 months. When I try to retrieve my emails I get the message "The server imap.gmail.com is not responding.  Verify that you have entered the correct account info in Mail settings'.  I have not changed anything and I have no problem getting mail on my MacBook.  Does anyone have any solutions.

    That is more of an issue with your email providers server than it is with your ipad.
    Suggest you contact your email provider and double check your settings, or delete and reinstall the email account.

  • Need Help: Web Analysis, Unable to retrieve the data & Security Tab missing

    Hi
    I'm new to Hyperion (our version: 9.2.1) and we're implementing Hyperion Planning. One of the reporting tools is Web Analysis.
    I'm trying to create simple grid reporting. but I'm unable to retrieve the data instead the result is "n/a"
    and
    The File's Properties > Security tab is missing
    Does anyone know my issue?
    Thanks,

    Hi Experts,
    You told its resolved.how?
    I am having the same issue i am unable to retrive the tables.
    "Database:MS SQL Server
    Driver :weblogic.jdbcx.sqlserver.SQLServerDataSource.
    Connection String:jdbc:weblogic:sqlserver://localhost:1433;databaseName=BAM"
    Please help if you have resolved this issue.Any helpful links plz forward [email protected]
    Thanks

  • Unable to retrieve mail from server on my account

    Hi there.
    I am unable since june 26 to retrieve email from the server. I check information on my mail app and i see my mail list store on the server. I also tried to send me an email. But still unable to retrieve it. So i can send email, but enable to get them. I tried to reconstruct the database directly on the server without success.
    OSX server 10.4
    Does someone have an idea of what i could be?
    Thx.
    Alain

    Hi
    Not a lot to go on is there? However if you use the GUI or the command line its a good idea to stop the mail service before attempting a Reconstruct. In my experience I don't think its ever worked using the GUI. Perhaps others have had more luck?
    Following these instructions should get you back on track:
    http://docs.info.apple.com/article.html?artnum=107996
    You'll get all previously read mail marked as unread but that's easily dealt with. As already stated it's difficult to give any clear advice as you are keeping things to yourself somewhat. The above link assumes its a standard Mail Service setup using the GUI alone.
    Tony

  • I am unable to find an email from July of last year. It was stored in my Persoanl Folder but is not there any longer.

    I Am unable to retrieve an old email on my iPhone.  It was saved in my Personal Folder but has disappeared.  It was from July of last year, 2014.

    Sorry to hear that.
    Do you have a question?

  • Unable to retrieve settings for this user

    Just setting up my new mac mini server for first time. It is updated to Mountain Lion. Setup local network user account with account name same as local short names on other macs (same on all of my mcahines). Then used System Prefs> Mail, Contacts, and Calendars.... to add a server account. Used exact same account info as on server (had both open to view).
    Get the message: "unable to retrieve settings for this user"
    Turned of firewalls... still not change.
    Did search for this problem.... no real helpful responses.
    Thought I was following all the basic steps to add a local network user. What am I missing?
    Thanks

    This message gets thrown if no services are enabled that the wizard wants.  Enable calendar, contacts, email, etc and it will connect.  This threw me off until I turned on the contact server for the heck of it and it started working.

  • Unable to open certain email messages

    Hi,
    I've configured my gmail account on nokia messaging on my 5800 XM. I get notified on new email and I've been able to get my emails as well.
    But there is this weird problem with certain emails. When I click on the email, it retrieves the message switches to open that email, but immediately switches back to the list of emails. I've tried a lot of times, but this seems to happen consistently for some emails. Is there any reason why I'm unable to open certain emails?
    (I don't really see anything special about these emails that don't open)
    Regards,
    Anand 

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Mail unable to send any emails

    Hi,
    In my office I have setup my MacBook Pro Mail. I can receive emails but can't send any out. I read that I should use Connection Doctor. I know my incoming mail server address but not the smtp. How should I trouble shoot?

    guys refuse to share the outgoing server details. Hence, I am only able to retrieve my emails but am unable to send out.
    Perhaps they are not clear on what settings you need? The settings you need are what any user with any computer (Mac, Windows, Unix, Linux, whatever) would need to configure their email program. You aren't asking for anything special here.
    Consider showing the article I mentioned (http://support.apple.com/kb/HT1277) to your IT person so he/she sees what it is your are looking for (and why...you want to use your email).
    If that does not work you might want to seek someone higher up the IT chain to talk to (Or go to your superior and ask them to intercede as you are being denied what you need to use your tools.)
    Asking for one's email settings is not like asking for nuclear missile launch codes from the US government. If you are someone who has an account given to you by your organization you need the settings to use the account assigned to you. Unless of course they intend for you to only be able to receive and not send. In which case, everything is as it should be.

  • Error adding RDSH to existing collections: Unable to retrieve the session collection properties

    I've randomly experienced a problem on our production server. I can no longer add RDSH servers to existing collections but I can create a new collection.  The error message from add-rdsessionhost: 
    Unable to retrieve the session collection properties.
        + CategoryInfo          : InvalidResult: (:) [], RDManagementException
        + FullyQualifiedErrorId : JobStateFailed
        + PSComputerName        : localhost
    I can amend the rds.RoleRdsh table to add the server to the collection but more gtables need to be edited manually to get it working. There appears to be some kind of permissions issue editing exisitng collections but not new ones? I'm not aware of anything
    that has changed since I last amended a collection, the day before.
    Any help would be appreciated. I can provide more information if necessary.

    Hi,
    Based on my research, there was a similar case where an empty collection existed in Connection Broker SQL database, deleting the empty collection resolved the issue.
    Please run PowerShell cmdlet Get-RDSessionCollection
    to list all collections in the RDS deployment.
    Get-RDSessionCollection
    https://technet.microsoft.com/en-us/library/jj215456.aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • DPS11g: [Original error=52] Unable to retrieve backend SEARCH connection

    Directory Proxy 11g
    We get, on a random basis the following two errors....
    Err1: SEARCH RESPONSE err=52 msg="Unable to process the search request. Reason: [Original error=52] Unable to retrieve a backend SEARCH connection."
    Err2: [Original error=52] Unable to retrieve a backend BIND connection
    The following sun blog suggested increasing max connection setting from 1024 or change the connectionPoolTimeoutInMillisec under cn=config.
    http://blogs.sun.com/sin/entry/unable_to_retrieve_a_backend. We do not think the max connections are getting exhausted, so will try the connectionPoolTimepout setting.
    Would like to know if this is experienced by anyone else and if so, what type of configuration tuning resolved this error.
    [email protected]

    My DPS configuration is as follows:
    Datasources: ds-p1,ds-p2,ds-p3,ds-p4,ds-p5
    DataSourcePools: cal-pool(p1,p2,p3), cas-pool(p4,p5) , sync-pool (p1,p2) [note: sync is failover , other pools are proportional)
    DataViews: Root (all suffixes)
    ConnectionHandlers: cas-handler, cas-handler, sycn-handler
    We have two DPS instances in the cluster and are in production. We run into this "Unable to Retrieve" error about 15 to 20 times in 24hrs. Total operations are in 600K range for the 24hrs duration. The error is quite random. I do not see any exhaustion of max-connections per data source in cn=monitor.
    Error Samples from the logs:
    SAMPLE1:
    [17/Nov/2010:09:09:01 -0800] - PROFILE - INFO - conn=1707265 assigned to connection handler cn=cal-connection-handler,cn=connection handlers,cn=config
    [17/Nov/2010:09:09:01 -0800] - CONNECT - INFO - conn=1707265 client=x.x.x.x:47432 server=dsp-p2.x.x.x:3389 protocol=LDAP
    [17/Nov/2010:09:09:01 -0800] - OPERATION - INFO - conn=1707265 op=0 BIND dn="" method="SIMPLE" version=3 controls=""
    [17/Nov/2010:09:09:01 -0800] - OPERATION - INFO - conn=1707265 op=0 BIND RESPONSE err=0 msg="" etime=0
    [17/Nov/2010:09:09:01 -0800] - OPERATION - INFO - conn=1707265 op=1 msgid=2 SEARCH base="dc=x,dc=x" scope=0 controls="" filter="(objectclass=*)" attrs="*"
    [17/Nov/2010:09:09:07 -0800] - OPERATION - INFO - conn=1707265 op=1 SEARCH RESPONSE err=52 msg="Unable to process the search request. Reason: [Original error=52] Unable to retrieve a backend SEARCH connection." nentries=0 etime=6049
    [17/Nov/2010:09:09:07 -0800] - OPERATION - INFO - conn=1707265 op=2 UNBIND
    [17/Nov/2010:09:09:07 -0800] - DISCONNECT - INFO - conn=1707265 reason="unbind"
    SAMPLE2:
    [17/Nov/2010:10:40:18 -0800] - PROFILE - INFO - conn=1737625 assigned to connection handler cn=cal-connection-handler,cn=connection handlers,cn=config
    [17/Nov/2010:10:40:18 -0800] - CONNECT - INFO - conn=1737625 client=128.x.x.x:52906 server=dsp-p2.x.x.x:389 protocol=LDAP
    [17/Nov/2010:10:40:18 -0800] - OPERATION - INFO - conn=1737625 op=0 BIND dn="uid=adm,ou=applications,dc=x,dc=x" method="SIMPLE" version=2 controls=""
    [17/Nov/2010:10:40:19 -0800] - SERVER_OP - INFO - conn=1737625 op=0 BIND dn="uid=adm,ou=applications,dc=x,dc=x" method="SIMPLE" version=2 s_msgid=157 s_conn=ds-p1:70887
    [17/Nov/2010:10:40:19 -0800] - SERVER_OP - INFO - conn=1737625 op=0 BIND RESPONSE err=0 msg="" s_conn=ds-p1:70887
    [17/Nov/2010:10:40:19 -0800] - OPERATION - INFO - conn=1737625 op=0 BIND RESPONSE err=0 msg="" etime=1261
    [17/Nov/2010:10:40:19 -0800] - OPERATION - INFO - conn=1737625 op=1 msgid=2 SEARCH base="ou=people,dc=b,dc=e" scope=2 controls="" filter="(sn=282511)" attrs="uid displayname"
    [17/Nov/2010:10:40:26 -0800] - OPERATION - INFO - conn=1737625 op=1 SEARCH RESPONSE err=52 msg="Unable to process the search request. Reason: [Original error=52] Unable to retrieve a backend SEARCH connection." nentries=0 etime=6048
    [17/Nov/2010:10:40:27 -0800] - OPERATION - INFO - conn=1737625 op=2 UNBIND
    [17/Nov/2010:10:40:27 -0800] - DISCONNECT - INFO - conn=1737625 reason="unbind"
    SAMPLE3:
    [17/Nov/2010:15:31:41 -0800] - PROFILE - INFO - conn=1846610 assigned to connection handler cn=cal-connection-handler,cn=connection handlers,cn=config
    [17/Nov/2010:15:31:41 -0800] - CONNECT - INFO - conn=1846610 client=x.x.x.x:2247 server=dsp-p2.x.x.x:3636 protocol=LDAPS
    [17/Nov/2010:15:31:41 -0800] - OPERATION - INFO - conn=1846610 op=0 BIND dn="uid=x,ou=applications,dc=x,dc=x" method="SIMPLE" version=3 controls=""
    [17/Nov/2010:15:31:47 -0800] - OPERATION - INFO - conn=1846610 op=0 BIND RESPONSE err=52 msg="[Original error=52] Unable to retrieve a backend BIND connection." etime=6050
    Edited by: berkeley.edu on Nov 18, 2010 8:40 AM

Maybe you are looking for