I am unable to start two oc4j servers (stand alone)

Hi All,
I am unable to start the two oc4j servers as it is giving the following exception
Starting OC4J from C:\oc4j\j2ee\home ...
2009-01-21 11:38:34.015 NOTIFICATION JMSServer[]: OC4J JMS server recovering tra
nsactions (commit 0) (rollback 0) (prepared 0).
2009-01-21 11:38:34.015 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/Oc4jJmsExceptionQueue].
2009-01-21 11:38:34.093 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/jobstore].
2009-01-21 11:38:34.203 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/events].
2009-01-21 11:38:34.234 NOTIFICATION JMSServer[]: OC4J JMS server recovering loc
al transactions Queue[jms/notifications].
2009-01-21 11:38:34.281 ERROR jms.xml: port 9,127 already in use.
09/01/21 11:38:34 *** (SEVERE) jms.xml: port 9,127 already in use.
2009-01-21 11:38:34.281 ERROR Failed to set the internal configuration of the OC
4J JMS Server with: XMLJMSServerConfig[file:/C:/oc4j/j2ee/home/config/jms.xml]
09/01/21 11:38:34 *** (SEVERE) Failed to set the internal configuration of the O
C4J JMS Server with: XMLJMSServerConfig[file:/C:/oc4j/j2ee/home/config/jms.xml]
2009-01-21 11:38:34.281 ERROR J2EE OJR0011 Exception starting JMS server: Failed
to set the internal configuration of the OC4J JMS Server with: XMLJMSServerConf
ig[file:/C:/oc4j/j2ee/home/config/jms.xml]
2009-01-21 11:38:34.328 ERROR J2EE RMI0002 Error starting ORMI server gis77 port
23,791: Address already in use: JVM_Bind
2009-01-21 11:38:34.328 ERROR java.net.BindException: Address already in use: JV
M_Bind
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:359)
at java.net.ServerSocket.bind(ServerSocket.java:319)
at java.net.ServerSocket.<init>(ServerSocket.java:185)
at com.evermind.server.rmi.RMIServer.createServerSocket(RMIServer.java:4
01)
at com.evermind.server.rmi.RMIServer.createNonSecureSocket(RMIServer.jav
a:313)
at com.evermind.server.rmi.RMIServer.setConfig(RMIServer.java:194)
at com.evermind.server.ApplicationServer.initializeRMI(ApplicationServer
.java:2235)
at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.jav
a:914)
at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLa
uncher.java:113)
at java.lang.Thread.run(Thread.java:595)
09/01/21 11:38:34 Error starting ORMI server gis77 port 23,791: Address already
in use: JVM_Bind
09/01/21 11:38:34 Shutting down OC4J...
even I got the same exception after changing the port numbers in rmi.xml and jms.xmls
Any help appreciated...
Thanks in advance,
Krishna

This is my favorite FAQ. ;-)
Generally speaking, to start two OC4Js you have to make sure that they don't listen on the same ports. The easiest way is to copy the home directory to another one, (eg. home2) and change the ports in home2/config/*.xml.
With OC4J 10.1.3.x you can use the Application Server Console to change the number of JVMs to more than one and you're done.
--olaf

Similar Messages

Unable to start the Managed servers OIM and SOA after starting the Weblogic

Hi,
We are unable to start the any manager servers after starting the weblogic Admin Server.
We are getting the below error after trying to start the OIM or SOA managed servers.
Error: Exception thrown by the agent : java.rmi.server.ExportException: Port already in use: 5555; nested exception is:
java.net.BindException: Address already in use
We have also cross verified that the port 5555 is listening after starting the weblogic Admin server.
Please help us to start the managed servers in the weblogic 10.3.5.
Thanks.

We are getting the below errors after starting the Admin server and Managed servers.
Admin Server:
<Jan 11, 2012 7:15:06 AM EST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Jan 11, 2012 7:16:02 AM EST> <Error> <org.apache.beehive.netui.pageflow.internal.AdapterManager> <BEA-000000> <ServletContainerAdapter manager not initialized correctly.>
Managed Server:
Starting WLS with line:
/opt/jdk1.6.0_27/bin/java -client -Xms1024m -Xmx4096m -XX:PermSize=512m -XX:MaxPermSize=1024m -Dweblogic.Name=oim_server1 -Djava.security.policy=/ama/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.security.SSL.trustedCAKeyStore=/ama/Oracle/Middleware/wlserver_10.3/server/lib/cacerts -Xverify:none -da -Dplatform.home=/ama/Oracle/Middleware/wlserver_10.3 -Dwls.home=/ama/Oracle/Middleware/wlserver_10.3/server -Dweblogic.home=/ama/Oracle/Middleware/wlserver_10.3/server -Dcommon.components.home=/ama/Oracle/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/ama/Oracle/Middleware/user_projects/domains/base_domain -Djrockit.optfile=/ama/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig/servers/oim_server1 -Doracle.domain.config.dir=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig/carml -Digf.arisidstack.home=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/ama/Oracle/Middleware/user_projects/domains/base_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/ama/Oracle/Middleware/user_projects/domains/base_domain/servers/oim_server1/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/ama/Oracle/Middleware/Oracle_IDM1/server/loginmodule/wls,/ama/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/ama/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol|oracle.fabric.common.classloaderurl.handler|oracle.fabric.common.uddiurl.handler|oracle.bpm.io.fs.protocol -Dweblogic.jdbc.remoteEnabled=false -DXL.HomeDir=/ama/Oracle/Middleware/Oracle_IDM1/server -Djava.security.auth.login.config=/ama/Oracle/Middleware/Oracle_IDM1/server/config/authwl.conf -Dorg.owasp.esapi.resources=/ama/Oracle/Middleware/Oracle_IDM1/server/apps/oim.ear/APP-INF/classes -da:org.apache.xmlbeans... -Dsoa.archives.dir=/ama/Oracle/Middleware/Oracle_SOA1/soa -Dsoa.oracle.home=/ama/Oracle/Middleware/Oracle_SOA1 -Dsoa.instance.home=/ama/Oracle/Middleware/user_projects/domains/base_domain -Dtangosol.coherence.clusteraddress=227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dweblogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Djavax.net.ssl.trustStore=/ama/Oracle/Middleware/wlserver_10.3/server/lib/DemoTrust.jks -Dem.oracle.home=/ama/Oracle/Middleware/oracle_common -Djava.awt.headless=true -Dums.oracle.home=/ama/Oracle/Middleware/Oracle_SOA1 -Dweblogic.management.discover=false -Dweblogic.management.server=http://127.0.0.1:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/ama/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/ama/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath weblogic.Server
Error: Exception thrown by the agent : java.rmi.server.ExportException: Port already in use: 5555; nested exception is:
java.net.BindException: Address already in use
We have to find out why the port 5555 is in listening mode after starting the Admin server.

Unable to start two httpd daemons for 2.2.13 version

Hi All,
I tried to add copy /etc/httpd2.2.13 to /etc/httpd2.2.13_2. The I changed the pidfile and LockFile also in conf/extra/httpd-mpm.conf, but when i start httpd both the the pid file is getting created in both logs of etc/httpd2.2.13 to /etc/httpd2.2.13_2. I am not sure how this is happening. Please suggest me to start two httpd in one machine at the same time.
Regards
Sundi

Look at the '-d' option of httpd. You'll then have to copy some files and directories since you don't want the server to share, for example, the same configuration and log files.
Depending on how you create the new directory hierarchy, you might also have to set the PidFile and LockFile directive, etc.
And please follow the forum etiquette next time...

Starting OC4J not stand alone

Can I start the OC4J not only from the command line but also when the Apache starts?
I think when I close the command line window (WINDOWS) the OC4J stops running. Is it true?
Thanks.

Hi Manolis,
On my PC -- running Windows2000 -- I can use the "start" command to start
OC4J as a "background" process, i.e. it continues to run even after I
close the DOS prompt window I used to type in the "start" command.
Simply type "start" before your normal OC4J command, e.g.
start java -jar oc4j.jar
My version of OC4J is 1.0.2.2.1
I think there was also a discussion on this forum about setting up OC4J
as a "service" on Windows. Perhaps you could try searching the forum
archives for this discussion?
Hope this has helped you.
Good Luck,
Avi.

Unable to start oafm OC4J using adtrtal.sh

Hi Evry1,
Today I applied Inventory patch on ebiz 12.1.1 Platform HP-UX 11.31.
Autopatch completed successfully.
But when I started services using adstrtall.sh :
After runnnig adstrtal.sh script i am getting :
You are running adoacorectl.sh version 120.13
Starting OPMN managed OACORE OC4J instance ...
adoacorectl.sh: exiting with status 0
adoacorectl.sh: check the logfile /u02/ebiz/inst/apps/VISMAX_maxdemo/logs/appl/admin/log/adoacorectl.txt for more information ...
.end std out.
.end err out.
Executing service control script:
/u02/ebiz/inst/apps/VISMAX_maxdemo/admin/scripts/adformsctl.sh start
script returned:
You are running adformsctl.sh version 120.16.12010000.3
Starting OPMN managed FORMS OC4J instance ...
Calling txkChkFormsDeployment.pl to check whether latest FORMSAPP.EAR is deployed...
Program : /u02/ebiz/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkChkFormsDeployment.pl started @ Fri Dec 10 00:28:42 2010
*** Log File = /u02/ebiz/inst/apps/VISMAX_maxdemo/logs/appl/rgf/TXK/txkChkFormsDeployment_Fri_Dec_10_00_28_41_2010/txkChkFormsDeployment_Fri_Dec_10_00_28_41_2010.log
File "/u02/ebiz/apps/tech_st/10.1.3/j2ee/forms/applications/forms/formsweb/WEB-INF/lib/frmsrv.jar" exists. Proceeding to check the size...
=============================================
*** Latest formsapp.ear has been deployed ***
=============================================
Program : /u02/ebiz/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkChkFormsDeployment.pl completed @ Fri Dec 10 00:28:43 2010
Perl script txkChkFormsDeployment.pl got executed successfully
adformsctl.sh: exiting with status 0
adformsctl.sh: check the logfile /u02/ebiz/inst/apps/VISMAX_maxdemo/logs/appl/admin/log/adformsctl.txt for more information ...
.end std out.
*** ALL THE FOLLOWING FILES ARE REQUIRED FOR RESOLVING RUNTIME ERRORS
*** Log File = /u02/ebiz/inst/apps/VISMAX_maxdemo/logs/appl/rgf/TXK/txkChkFormsDeployment_Fri_Dec_10_00_28_41_2010/txkChkFormsDeployment_Fri_Dec_10_00_28_41_2010.log
.end err out.
Executing service control script:
/u02/ebiz/inst/apps/VISMAX_maxdemo/admin/scripts/adoafmctl.sh start
script returned:
ERROR : Timed out( 100000 ): Interrupted Exception
You are running adoafmctl.sh version 120.8
Starting OPMN managed OAFM OC4J instance ...
adstrtal.sh: Exiting with status 1
opmnctl status :
Verified the issue by the adoafmctl.sh status command, which displays :
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
default_group | oafm | N/A | Down
default_group | forms | 22824 | Alive
default_group | oacore | 22823 | Alive
HTTP_Server | HTTP_Server | 22822 | Alive
I googled and found some solutions but they didnt work :
2. cd $INST_TOP/ora/10.1.3/j2ee
rm -fr oacore/persistence/*
rm -fr oafm/persistence/*
rm -fr forms/persistence/*
removed all persistence. after strting adsrtall.sh oafm still shows down..
Kindly help me how to solve this , as No user is able to login :
Message : Interal server error 500 conctact [email protected]
Thanks and regards,
Waseem

Hussein,
I ran autoconfig and autoconfig completed with error:
Can this be the reason for oafm not starting.
[AutoConfig Error Report]
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[APPLY PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /u02/ebiz/apps/tech_st/10.1.3/perl/bin/perl -I /u02/ebiz/apps/tech_st/10.1.3/perl/lib/5.8.3 -I /u02/ebiz/apps/tech_st/10.1.3/perl/lib/site_per
l/5.8.3 -I /u02/ebiz/apps/apps_st/appl/au/12.0.0/perl -I /u02/ebiz/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/IA64.ARCHREV_0-thread-multi
-LP64 /u02/ebiz/inst/apps/VISMAX_maxdemo/admin/install
txkExecSetJaznCredentials.pl INSTE8_APPLY 1
AutoConfig is exiting with status 1
AutoConfig execution completed on Fri Dec 10 12:24:58 2010
Time taken for AutoConfig execution to complete : 3 mins 53 secs
~
when i check status of opmnctl:
$ ./adopmnctl.sh status -l
You are running adopmnctl.sh version 120.6.12010000.4
Checking status of OPMN managed processes...
Processes in Instance: VISMAX_maxdemo.maxdemo.max.com
---------------------------------------------------------------------------------------------------------+------
ias-component | process-type | pid | status | uid | memused | uptime | ports
---------------------------------------------------------------------------------------------------------+------
OC4JGroup:default_group | OC4J:oafm | N/A | Down | N/A | N/A | N/A | N/A
OC4JGroup:default_group | OC4J:forms | 28962 | Alive | 45 | 29040 | 1:07:39 | rmi:20500,jms:23500,ajp:22000
OC4JGroup:default_group | OC4J:oacore | 28870 | Alive | 44 | 33136 | 1:08:12 | rmi:20000,jms:23000,ajp:21500
HTTP_Server | HTTP_Server | 28818 | Alive | 43 | 17452 | 1:07:47 | https1:4443,http1:8000
adopmnctl.sh: exiting with status 0

Unable to start Managed server from admin console using nodemanager

I changed the ip address and hostname of the server on which Weblogic Server 10.3.5 is running. After that I am unable to start the managed servers using Admin console. Is there any changes in the nodemanager configuration files which need to be done to start the managed servers from admin console.

Hi there,
Can you check the following configuration in Weblogic admin console ?
1- Check which listen address mentioned under the Machine configuration ( Environment > Machines > select appropriate nodemanager machine >Configuration > Node Manager ). If it is pointing to old host name, change it to new one.
2- Once you done with Step 1. Check whether the machine is reachable or not. ( Machine > [Your Machine] > Monitoring > status.
3- If still isuse persists.. Check the managed server startup log files ( for eg:- managedserver1.out under the path $DOMAIN_HOME\Servers\managedserver1\logs directory.
Thanks
Lakshman

I am unable to start Managed Servers through Weblogic AdminConsole

Hi,
We are using Weblogic 10.3.1.0 version.
Totaly 4 Managed Severs
1 Admin Server
with Nodemanger.
In Admin Console When ever we going to Stop the Manged Servers.
1. Environment ----- > Servers ---- > Control ----------- > Mananged Server 1 -----------> Force shutdown
2. Then click refresh button ---- showing "FAILED_NOT_RESTARTABLE"
3. after that when ever we going to start the Managed Server in Admin console
First its Showing ----- Starting
and next its showing ----- FAILED_NOT_RESTARTABLE
4. its not coming to Running State.
In Logs
Domain log
-----------> <1273141345460> <BEA-000450> <Socket 8 internal data record unavailable (probable closure due idle timeout), event received 17>
####<06-May-2010 11:54:40 o'clock BST> <Alert> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280738> <BEA-000396> <Server shutdown has been requested by weblogic>
####<06-May-2010 11:54:40 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280771> <BEA-000365> <Server state changed to FORCE_SUSPENDING>
####<06-May-2010 11:54:40 o'clock BST> <Notice> <Cluster> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143280844> <BEA-000163> <Stopping "async" replication service>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143281061> <BEA-000365> <Server state changed to ADMIN>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <WebLogicServer> <ukirt156> <twpserver1> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1273143281064> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<06-May-2010 11:54:41 o'clock BST> <Notice> <Server> <ukirt156> <twpserver1> <DynamicListenThread[Default]> <<WLS Kernel>> <> <> <1273143281113> <BEA-002607> <Channel "Default" listening on 172.21.149.168:7003 was shutdown.>
####<06-May-2010 11:56:30 o'clock BST> <Error> <NodeManager> <ukirt156> <AdminServer> <[ACTIVE] ExecuteThread: '45' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1273143390016> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
AdminServer log
<06-May-2010 11:56:30 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
<06-May-2010 11:57:33 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
<06-May-2010 12:07:02 o'clock BST> <Error> <NodeManager> <BEA-300048> <Unable to start the server twpserver1 : Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
ManagedServer Log
<06-May-2010 11:54:40 o'clock BST> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by weblogic>
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler shutdown
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED shutting down.
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler pause
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED paused.
06-May-2010 11:54:41 org.quartz.core.QuartzScheduler shutdown
INFO: Scheduler DefaultQuartzScheduler_$_NON_CLUSTERED shutdown complete.
<06-May-2010 11:54:54> <Debug> <NodeManager> <Waiting for the process to die: 19316>
<06-May-2010 11:54:54> <Info> <NodeManager> <Server was shut down normally>
<06-May-2010 11:54:54> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
NodeManager Log
<06-May-2010 11:54:54> <Info> <twp_domain> <twpserver1> <Server was shut down normally>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Boot identity properties saved to "/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Startup configuration properties saved to "/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/startup.properties">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Rotated server output log to "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out00020">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server error log also redirected to server log>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Starting WebLogic server with command line: /appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/bin/java -Dweblogic.Name=twpserver1 -Djava.security.policy=/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.management.server=http://ukirt156:7001 -Djava.library.path="/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/lib/i386/jrockit:/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/lib/i386:/appl/weblogic/oracle/middleware/jrockit_160_05_R27.6.2-20/jre/../lib/i386::/appl/nsm/CA/UnicenterNSM/lib:/appl/nsm/CA/SharedComponents/JRE/1.4.2_09/lib/i386/client:/appl/nsm/CA/SharedComponents/JRE/1.4.2_09/lib/i386:/appl/nsm/CA/SharedComponents/ccs/dia/dna/lib:/appl/nsm/CA/SharedComponents/ccs/dia/lib:/usr/lib:/opt/CA/CAlib:/appl/nsm/CA/SharedComponents/lib:/appl/nsm/CA/SharedComponents/Csam/SockAdapter/lib:/appl/weblogic/oracle/middleware/wlserver_10.3/server/native/linux/i686:/appl/weblogic/oracle/middleware/wlserver_10.3/server/native/linux/i686/oci920_8" -Djava.class.path=/data/share/package/twp/WEB-INF/lib/ojdbc14.jar:/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/appl/weblogic/oracle/middleware/wlserver_10.3/server/lib/weblogic.jar -Dweblogic.system.BootIdentityFile=/appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xmanagement:port=7091,ssl=false,authenticate=false -Xms=1200m -Xmx=1200m -Xverbose:gc,gcpause -Dreflexis.scheduler=true -Dreflexis.server=twpserver1 -Djava.awt.headless=true -Dclient.encoding.override=UTF-8 -Doracle.jdbc.V8Compatible=true weblogic.Server >
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Working directory is "/appl/weblogic/scripts">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Rotated server output log to "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out00021">
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server error log also redirected to server log>
<06-May-2010 11:56:21> <Info> <twp_domain> <twpserver1> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
<06-May-2010 11:56:29> <Info> <twp_domain> <twpserver1> <Server failed during startup so will not be restarted>
<06-May-2010 11:56:29> <Warning> <Exception while starting server 'twpserver1': java.io.IOException: Server failed to start up. See server output log for more details.>
java.io.IOException: Server failed to start up. See server output log for more details.
at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:332)
at weblogic.nodemanager.server.Handler.handleStart(Handler.java:542)
at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:119)
at weblogic.nodemanager.server.Handler.run(Handler.java:66)
at java.lang.Thread.run(Thread.java:619)
Server logs
<06-May-2010 12:06:57> <Info> <NodeManager> <Server output log file is "/appl/weblogic/scripts/servers/twpserver1/logs/twpserver1.out">
[JRockit] Management server started on port 7091, ssl=false, authenticate=false.
<06-May-2010 12:06:59 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.2-20_o-108500-1.6.0_05-20090120-1115-linux-ia32 from BEA Systems, Inc.>
<06-May-2010 12:07:00 o'clock BST> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}xvFgPysVi5b89pYwaAppoqPXQ5wFVW13yoFhzhKmuQo= from the file /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /appl/weblogic/scripts/servers/twpserver1/data/nodemanager/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception <06-May-2010 12:07:01 o'clock BST> <Info> <Management> <BEA-141223> <The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the
<06-May-2010 12:07:01 o'clock BST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name twpserver1 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:749)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:488)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<06-May-2010 12:07:01 o'clock BST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<06-May-2010 12:07:01 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<06-May-2010 12:07:02> <Debug> <NodeManager> <Waiting for the process to die: 19443>
<06-May-2010 12:07:02> <Info> <NodeManager> <Server failed during startup so will not be restarted>
<06-May-2010 12:07:02> <Debug> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
Note: if i start the manged servers through WLST script its working fine.
[twpuser@ukirt156 /appl/weblogic/scripts]$ java weblogic.WLST
nmConnect('weblogic', 'w3bl0g1c', 'ukirt156', '5556', 'twp_domain', '/appl/weblogic/oracle/middleware/user_projects/domains/twp_domain', 'plain')
nmStart('twpserver1')
Please provide the solution, how to solve this issue.
Thanks
SRK

Just at first glance, it seems as though you have one or more configuration issues, perhaps inconsistencies between the node manager server configuration files and the domain's config.xml
nmConnect('weblogic', 'w3bl0g1c', 'ukirt156', '5556', 'twp_domain', '/appl/weblogic/oracle/middleware/user_projects/domains/twp_domain', 'plain')
nmStart('twpserver1')
implies that tmp_domain is configured in /appl/weblogic/oracle/middleware/user_projects/domains, (which is the default from the configuration wizard). However, the node manager and server output logs make it seem like it's trying to use a domain in the directory /appl/weblogic/scripts. Not sure how that happened, perhaps you had two domains? Perhaps copied or moved the domain files? Something else?
In any case, start by checking out your nodemanager.domains file and ensure that it reflects your intended domain directory.

I have been using Safari for years and have always kept it on "private." Starting two days ago, I suddenly found myself unable to log onto my blog and many other sites that I normally log onto when private is set. Why?

I have been using Safari for years and have always kept it on "private." Starting two days ago, I suddenly found myself unable to log onto my blog and many other sites that I normally log onto when private is set. This so annoying, I just switched to Firefox. I don't like Firefox nearly as much as I like Safari. What is happening? How do I fix the problem?
Thank you.

Might be a corrupted database ...
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

Oc4j-Unable to start

I want to deploy MapViewer on Standalone OC4J.
I have installed OC4J successfully on my m/c.
But I am unable to start it. It gives me the below error:
F:\OC4J\j2ee\home>java -jar oc4j.jar -config F:\OC4J\j2ee\home\config\server.xml
Could not canonicalize '"C:\Program Files\Common Files\Intergraph"' (The filename, directory name, or volume label syntax is incorrect). From system property java.library.path.
Could not canonicalize '"C:\Program Files\Common Files\Intergraph"' (The filename, directory name, or volume label syntax is incorrect). From system property java.library.path.
05/01/05 11:23:44 Auto-deploying - ../../home/applications/admin_ejb.jar (orion-ejb-jar.xml had been updated since the previous deployment)...
05/01/05 11:23:46 Error initializing server: Error initializing ejb-module; Exception null
05/01/05 11:23:46 Fatal error: server exiting

Kiran,
I know that java sometimes has trouble handling directory names with spaces in them. Perhaps you could install "MapViewer" in a directory other than:
C:\Program Files\Common Files\IntergraphGood Luck,
Avi.

Unable to start oc4j in aix

installation was done on aix server.
jdk 1.6 was used with sr8
provide the doc if available for aix 10.1.3.4.1 (64 bit)
error :socket is already in use...mentioning the port no.
suggest on the same .

Hi,
Can you find any further details about the error in the logs?
Please see if (Note: 430680.1 - When Starting an OC4J Instance Receive Error 'Unable To Bind Socket: Address Already In Use' Error) helps.
Thanks,
Hussein

Unable to start OC4J & HTTP Server

Hi All,
I am installing Oracle 10g Application Server Release 3(10.1.3) on IBM AIX 5.3L ML 04 operating system by remote desktop using "Xmanager" software for GUI.
I choose advanced installation type "Integrated Web Server, J2EE Server and Process Management". Everything went smoothly, till The Configuration Assistants. The OPMN configuration Assistant failed.
I went ahead with completion of the installation. Later I tried
$ ./opmnctl status
Processes in Instance: ingas.localhost
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
OC4J | home | N/A | Down
HTTP_Server | HTTP_Server | N/A | Down
ASG | ASG | N/A | Down
$ ./opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=InBlrIngAIX1:6200
0 of 2 processes started.
ias-instance id=ingas.localhost
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=1867980863,pid=553168)
failed to start a managed process after the maximum retry limit
Log:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs/HTTP_Server~1
ias-component/process-type/process-set:
OC4J/home/default_group/
Error
--> Process (index=1,uid=1867980864,pid=450578)
time out while waiting for a managed process to start
Log:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs/OC4J~home~default_group
~1
Please find the details in the different log files
PATH: /usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs
LOGFILENAME: opmn.log
$ tail -100 opmn.log
08/03/24 15:40:54 [pm-process] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980847:450668)
08/03/24 15:40:54 [libopmnohs] Forcefully Terminating Process: HTTP_Server~HTTP_
Server~HTTP_Server~1 (1867980847:450668)
08/03/24 15:41:56 [pm-process] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980847:450668)
08/03/24 15:41:56 [libopmnohs] Forcefully Terminating Process: HTTP_Server~HTTP_
Server~HTTP_Server~1 (1867980847:450668)
08/03/24 15:42:58 [pm-process] Stopping Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980847:450668)
08/03/24 15:42:58 [libopmnohs] Forcefully Terminating Process: HTTP_Server~HTTP_
Server~HTTP_Server~1 (1867980847:450668)
08/03/24 15:42:59 [pm-process] Process Stopped: HTTP_Server~HTTP_Server~HTTP_Ser
ver~1 (1867980847:450668)
08/03/24 15:47:52 [pm-requests] Request 4 Completed. Command: /start
08/03/24 15:47:52 [pm-process] Stopping Process: OC4J~home~default_group~1 (1867
980848:536588)
08/03/24 15:47:52 [libopmnoc4j] Process Stop Error: OC4J~home~default_group~1 (1
867980848:536588)
08/03/24 15:47:52 [libopmnoc4j] Failed to construct stop command for proc: 18679
80848
08/03/24 15:47:52 [libopmnoc4j] Forcefully Terminating Process: OC4J~home~defaul
t_group~1 (1867980848:536588)
08/03/24 15:47:54 [pm-process] Process Stopped: OC4J~home~default_group~1 (18679
80848:536588)
08/03/24 16:04:24 [pm-requests] Request 6 Started. Command: /start
08/03/24 16:04:24 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980849:0)
08/03/24 16:04:24 [pm-process] Starting Process: OC4J~home~default_group~1 (1867
980850:0)
08/03/24 16:04:24 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980849:0)
08/03/24 16:14:24 [pm-requests] Request 6 Completed. Command: /start
08/03/24 16:14:24 [pm-process] Stopping Process: OC4J~home~default_group~1 (1867
980850:499966)
08/03/24 16:14:24 [libopmnoc4j] Process Stop Error: OC4J~home~default_group~1 (1
867980850:499966)
08/03/24 16:14:24 [libopmnoc4j] Failed to construct stop command for proc: 18679
80850
08/03/24 16:14:24 [libopmnoc4j] Forcefully Terminating Process: OC4J~home~defaul
t_group~1 (1867980850:499966)
08/03/24 16:14:26 [pm-process] Process Stopped: OC4J~home~default_group~1 (18679
80850:499966)
08/03/24 16:26:31 [pm-requests] Request 9 Started. Command: /start
08/03/24 16:26:31 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980851:0)
08/03/24 16:26:31 [pm-process] Starting Process: OC4J~home~default_group~1 (1867
980852:0)
08/03/24 16:26:31 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980851:0)
08/03/24 16:36:31 [pm-requests] Request 9 Completed. Command: /start
08/03/24 16:36:31 [pm-process] Stopping Process: OC4J~home~default_group~1 (1867
980852:507910)
08/03/24 16:36:31 [libopmnoc4j] Process Stop Error: OC4J~home~default_group~1 (1
867980852:507910)
08/03/24 16:36:31 [libopmnoc4j] Failed to construct stop command for proc: 18679
80852
08/03/24 16:36:31 [libopmnoc4j] Forcefully Terminating Process: OC4J~home~defaul
t_group~1 (1867980852:507910)
08/03/24 16:36:33 [pm-process] Process Stopped: OC4J~home~default_group~1 (18679
80852:507910)
08/03/24 16:49:04 [pm-requests] Request b Started. Command: /start
08/03/24 16:49:04 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980853:0)
08/03/24 16:49:04 [pm-process] Starting Process: OC4J~home~default_group~1 (1867
980854:0)
08/03/24 16:49:04 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980853:0)
08/03/24 16:59:05 [pm-requests] Request b Completed. Command: /start
08/03/24 16:59:05 [pm-process] Stopping Process: OC4J~home~default_group~1 (1867
980854:479354)
08/03/24 16:59:05 [libopmnoc4j] Process Stop Error: OC4J~home~default_group~1 (1
867980854:479354)
08/03/24 16:59:05 [libopmnoc4j] Failed to construct stop command for proc: 18679
80854
08/03/24 16:59:05 [libopmnoc4j] Forcefully Terminating Process: OC4J~home~defaul
t_group~1 (1867980854:479354)
08/03/24 16:59:07 [pm-process] Process Stopped: OC4J~home~default_group~1 (18679
80854:479354)
08/03/24 17:09:28 [pm-requests] Request f Started. Command: /start?process-type
=HTTP_Server
08/03/24 17:09:28 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980855:0)
08/03/24 17:09:29 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980855:0)
08/03/24 17:09:31 [pm-requests] Request f Completed. Command: /start?process-typ
e=HTTP_Server
08/03/24 17:29:24 [pm-requests] Request 11 Started. Command: /start?process-typ
e=HTTP_Server
08/03/24 17:29:24 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980856:0)
08/03/24 17:29:25 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980856:0)
08/03/24 17:29:27 [pm-requests] Request 11 Completed. Command: /start?process-ty
pe=HTTP_Server
08/03/25 09:43:19 [pm-requests] Request 13 Started. Command: /stop
08/03/25 09:43:19 [pm-requests] Request 13 Completed. Command: /stop
08/03/25 09:45:23 [pm-internal] OPMN server stopped. Request handling disabled.
08/03/25 09:45:23 [pm-requests] Request 14 Started. Command: /shutdown
08/03/25 09:45:23 [pm-requests] Request 14 Completed. Command: /shutdown
08/03/25 09:45:24 [internal] Logging disabled
08/03/25 09:55:10 [ons-internal] ONS server initiated
08/03/25 09:55:10 [pm-internal] PM state directory exists: /usr/home/oracle/prod
uct/10.1.3/OracleAS_1/opmn/logs/states
08/03/25 09:55:10 [pm-internal] OPMN server ready. Request handling enabled.
08/03/25 10:15:01 [pm-requests] Request 2 Started. Command: /start
08/03/25 10:15:01 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980857:0)
08/03/25 10:15:01 [pm-process] Starting Process: OC4J~home~default_group~1 (1867
980858:0)
08/03/25 10:15:01 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980857:0)
08/03/25 10:25:01 [pm-requests] Request 2 Completed. Command: /start
08/03/25 10:25:01 [pm-process] Stopping Process: OC4J~home~default_group~1 (1867
980858:565454)
08/03/25 10:25:01 [libopmnoc4j] Process Stop Error: OC4J~home~default_group~1 (1
867980858:565454)
08/03/25 10:25:01 [libopmnoc4j] Failed to construct stop command for proc: 18679
80858
08/03/25 10:25:01 [libopmnoc4j] Forcefully Terminating Process: OC4J~home~defaul
t_group~1 (1867980858:565454)
08/03/25 10:25:03 [pm-process] Process Stopped: OC4J~home~default_group~1 (18679
80858:565454)
08/03/25 10:40:24 [pm-requests] Request 4 Started. Command: /start
08/03/25 10:40:24 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980859:0)
08/03/25 10:40:24 [pm-process] Starting Process: OC4J~home~default_group~1 (1867
980860:0)
08/03/25 10:40:24 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980859:0)
08/03/25 10:50:24 [pm-requests] Request 4 Completed. Command: /start
08/03/25 10:50:24 [pm-process] Stopping Process: OC4J~home~default_group~1 (1867
980860:540870)
08/03/25 10:50:24 [libopmnoc4j] Process Stop Error: OC4J~home~default_group~1 (1
867980860:540870)
08/03/25 10:50:24 [libopmnoc4j] Failed to construct stop command for proc: 18679
80860
08/03/25 10:50:24 [libopmnoc4j] Forcefully Terminating Process: OC4J~home~defaul
t_group~1 (1867980860:540870)
08/03/25 10:50:26 [pm-process] Process Stopped: OC4J~home~default_group~1 (18679
80860:540870)
08/03/25 15:39:39 [pm-requests] Request 7 Started. Command: /start
08/03/25 15:39:39 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980861:0)
08/03/25 15:39:39 [pm-process] Starting Process: OC4J~home~default_group~1 (1867
980862:0)
08/03/25 15:39:39 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980861:0)
08/03/25 15:49:39 [pm-requests] Request 7 Completed. Command: /start
08/03/25 15:49:39 [pm-process] Stopping Process: OC4J~home~default_group~1 (1867
980862:553126)
08/03/25 15:49:39 [libopmnoc4j] Process Stop Error: OC4J~home~default_group~1 (1
867980862:553126)
08/03/25 15:49:39 [libopmnoc4j] Failed to construct stop command for proc: 18679
80862
08/03/25 15:49:39 [libopmnoc4j] Forcefully Terminating Process: OC4J~home~defaul
t_group~1 (1867980862:553126)
08/03/25 15:49:41 [pm-process] Process Stopped: OC4J~home~default_group~1 (18679
80862:553126)
08/03/25 16:03:59 [pm-requests] Request 9 Started. Command: /start
08/03/25 16:03:59 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980863:0)
08/03/25 16:03:59 [pm-process] Starting Process: OC4J~home~default_group~1 (1867
980864:0)
08/03/25 16:03:59 [pm-process] Starting Process: HTTP_Server~HTTP_Server~HTTP_Se
rver~1 (1867980863:0)
08/03/25 16:13:59 [pm-requests] Request 9 Completed. Command: /start
08/03/25 16:13:59 [pm-process] Stopping Process: OC4J~home~default_group~1 (1867
980864:450578)
08/03/25 16:13:59 [libopmnoc4j] Process Stop Error: OC4J~home~default_group~1 (1
867980864:450578)
08/03/25 16:13:59 [libopmnoc4j] Failed to construct stop command for proc: 18679
80864
08/03/25 16:13:59 [libopmnoc4j] Forcefully Terminating Process: OC4J~home~defaul
t_group~1 (1867980864:450578)
08/03/25 16:14:01 [pm-process] Process Stopped: OC4J~home~default_group~1 (18679
80864:450578)
PATH: /usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs
LOGFILENAME: HTTP_Server~1
$ tail -100 HTTP_Server~1
08/03/24 15:41:57 Stop process
/usr/home/oracle/product/10.1.3/OracleAS_1/Apache/Apache/bin/apachectl hardstop:
httpd (pid 446594) not running
08/03/24 15:42:59 Stop process
/usr/home/oracle/product/10.1.3/OracleAS_1/Apache/Apache/bin/apachectl hardstop:
httpd stopped
08/03/24 16:04:24 Start process
/usr/home/oracle/product/10.1.3/OracleAS_1/Apache/Apache/bin/apachectl startssl:
httpd (pid 446602) already running
08/03/24 16:04:24 Start process
/usr/home/oracle/product/10.1.3/OracleAS_1/Apache/Apache/bin/apachectl startssl:
httpd (pid 446602) already running
08/03/24 16:26:31 Start process
/usr/home/oracle/product/10.1.3/OracleAS_1/Apache/Apache/bin/apachectl startssl:
httpd (pid 446602) already running
08/03/24 16:26:31 Start process
/usr/home/oracle/product/10.1.3/OracleAS_1/Apache/Apache/bin/apachectl startssl:
httpd (pid 446602) already running
08/03/24 16:49:04 Start process
/usr/home/oracle/product/10.1.3/OracleAS_1/Apache/Apache/bin/apachectl startssl:
httpd (pid 446602) already running
08/03/24 16:49:04 Start process
/usr/home/oracle/product/10.1.3/OracleAS_1/Apache/Apache/bin/apachectl startssl:
httpd (pid 446602) already running
08/03/24 17:09:28 Start process
apachectl is not owned by this user
08/03/24 17:09:30 Start process
apachectl is not owned by this user
08/03/24 17:29:24 Start process
apachectl is not owned by this user
08/03/24 17:29:26 Start process
apachectl is not owned by this user
08/03/25 10:15:02 Start process
apachectl is not owned by this user
08/03/25 10:15:02 Start process
apachectl is not owned by this user
08/03/25 10:40:25 Start process
apachectl is not owned by this user
08/03/25 10:40:25 Start process
apachectl is not owned by this user
08/03/25 15:39:40 Start process
/usr/home/oracle/product/10.1.3/OracleAS_1/Apache/Apache/bin/apachectl startssl:
httpd (pid 446602) already running
08/03/25 15:39:40 Start process
/usr/home/oracle/product/10.1.3/OracleAS_1/Apache/Apache/bin/apachectl startssl:
httpd (pid 446602) already running
08/03/25 16:04:00 Start process
/usr/home/oracle/product/10.1.3/OracleAS_1/Apache/Apache/bin/apachectl startssl:
httpd (pid 446602) already running
08/03/25 16:04:00 Start process
/usr/home/oracle/product/10.1.3/OracleAS_1/Apache/Apache/bin/apachectl startssl:
httpd (pid 446602) already running
PATH: /usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs
LOGFILENAME: HTTP_Server~1
$ tail -100 OC4J~home~default_group~1
08/03/24 15:11:42 Start process
WARNING: Unable to access loaded classes.
08/03/24 15:37:52 Start process
WARNING: Unable to access loaded classes.
08/03/24 16:04:24 Start process
WARNING: Unable to access loaded classes.
08/03/24 16:26:31 Start process
WARNING: Unable to access loaded classes.
08/03/24 16:49:04 Start process
WARNING: Unable to access loaded classes.
08/03/25 10:15:02 Start process
WARNING: Unable to access loaded classes.
08/03/25 10:40:25 Start process
WARNING: Unable to access loaded classes.
08/03/25 15:39:40 Start process
WARNING: Unable to access loaded classes.
08/03/25 16:04:00 Start process
WARNING: Unable to access loaded classes.
But when i tried "http://AppserverIP:7777" from my desktop, i was able to see the welcome screen, but was unable to see the enterprise manager page at "http://AppserverIP:7777/em "
Can anyone help me out on this regard?

Hi,
I am sure that only the OMPN configuration assistant has failed. Find below the last few lines of the installation log.
Trying to check if config_order xml is present
The scratch path is =/tmp/OraInstall2008-03-24_12-37-24PM
The config_order.xml is null
Starting to execute configuration assistants
Launched configuration assistant 'ADF Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: '/usr/home/oracle/product/10.1.3/OracleAS_1/jdk/bin/java -classpath /usr/home/oracle/product/10.1.3/OracleAS_1/lib/xmlparserv2.jar:/usr/home/oracle/product/10.1.3/OracleAS_1/BC4J/jlib/adfmant.jar buildsys.AdfConfigOc4j /usr/home/oracle/product/10.1.3/OracleAS_1 -oc4jInstanceName=home'
Start output from spawned process:
End output from spawned process.
Configuration assistant "ADF Configuration Assistant" succeeded
Result code for launching of configuration assistant is: 0
Launched configuration assistant 'OPMN Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: '/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/bin/opmnctl startall'
Start output from spawned process:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/bin/opmnctl[20]: unlimited: 0403-009 The specified number is not valid for this command.
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=InBlrIngAIX1:6200
0 of 2 processes started.
ias-instance id=ingas.localhost
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=1867980845,pid=446594)
time out while waiting for a managed process to start
Log:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs/HTTP_Server~1
ias-component/process-type/process-set:
OC4J/home/default_group/
Error
--> Process (index=1,uid=1867980846,pid=450632)
time out while waiting for a managed process to start
Log:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs/OC4J~home~default_group~1
End output from spawned process.
Invalid Exit Code. The following result code will be used for configuration assistants: 1
Configuration assistant "OPMN Configuration Assistant" failed
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/bin/opmnctl[20]: unlimited: 0403-009 The specified number is not valid for this command.
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=InBlrIngAIX1:6200
0 of 2 processes started.
ias-instance id=ingas.localhost
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=1867980845,pid=446594)
time out while waiting for a managed process to start
Log:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs/HTTP_Server~1
ias-component/process-type/process-set:
OC4J/home/default_group/
Error
--> Process (index=1,uid=1867980846,pid=450632)
time out while waiting for a managed process to start
Log:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs/OC4J~home~default_group~1
Result code for launching of configuration assistant is: 1
The OUICA command is launched from /usr/home/oracle/product/10.1.3/OracleAS_1/oui/bin/ouica.sh.
Error:*** Alert: Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured. Select the failed assistants and click the 'Retry' button to retry them. ***-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to /usr/home/oracle/product/10.1.3/OracleAS_1
Configuration directory is set to /usr/home/oracle/product/10.1.3/OracleAS_1/cfgtoollogs. All xml files under the directory will be processed
User Selected: Yes/OK
Starting to execute configuration assistants
Launched configuration assistant 'OPMN Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: '/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/bin/opmnctl startall'
Start output from spawned process:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/bin/opmnctl[20]: unlimited: 0403-009 The specified number is not valid for this command.
opmnctl: starting opmn and all managed processes...
The OUICA command is launched from /usr/home/oracle/product/10.1.3/OracleAS_1/oui/bin/ouica.sh.
Error:*** Alert: The assistant you are trying to stop is a "Recommended" assistant. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
Do you wish to proceed? ***-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to /usr/home/oracle/product/10.1.3/OracleAS_1
Configuration directory is set to /usr/home/oracle/product/10.1.3/OracleAS_1/cfgtoollogs. All xml files under the directory will be processed
User Selected: Yes/OK
The OUICA command is launched from /usr/home/oracle/product/10.1.3/OracleAS_1/oui/bin/ouica.sh.
Error:*** Alert: The assistant you are trying to stop is a "Recommended" assistant. Not successfully running any "Recommended" assistant means your system will not be correctly configured.
Do you wish to proceed? ***-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to /usr/home/oracle/product/10.1.3/OracleAS_1
Configuration directory is set to /usr/home/oracle/product/10.1.3/OracleAS_1/cfgtoollogs. All xml files under the directory will be processed
User Selected: Yes/OK
================================================================================
opmn id=InBlrIngAIX1:6200
0 of 2 processes started.
ias-instance id=ingas.localhost
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=1867980853,pid=516350)
failed to start a managed process after the maximum retry limit
Log:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs/HTTP_Server~1
ias-component/process-type/process-set:
OC4J/home/default_group/
Error
--> Process (index=1,uid=1867980854,pid=479354)
time out while waiting for a managed process to start
Log:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs/OC4J~home~default_group~1
End output from spawned process.
Configuration assistant "OPMN Configuration Assistant" was canceled.
Result code for launching of configuration assistant is: -1
Starting to execute configuration assistants
Launched configuration assistant 'OPMN Configuration Assistant'
Tool type is: Recommended.
The command being spawned is: '/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/bin/opmnctl startall'
Start output from spawned process:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/bin/opmnctl[20]: unlimited: 0403-009 The specified number is not valid for this command.
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=InBlrIngAIX1:6200
0 of 2 processes started.
ias-instance id=ingas.localhost
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=1867980859,pid=548904)
failed to start a managed process after the maximum retry limit
Log:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs/HTTP_Server~1
ias-component/process-type/process-set:
OC4J/home/default_group/
Error
--> Process (index=1,uid=1867980860,pid=540870)
time out while waiting for a managed process to start
Log:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs/OC4J~home~default_group~1
End output from spawned process.
Invalid Exit Code. The following result code will be used for configuration assistants: 1
Configuration assistant "OPMN Configuration Assistant" failed
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/bin/opmnctl[20]: unlimited: 0403-009 The specified number is not valid for this command.
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=InBlrIngAIX1:6200
0 of 2 processes started.
ias-instance id=ingas.localhost
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=1867980859,pid=548904)
failed to start a managed process after the maximum retry limit
Log:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs/HTTP_Server~1
ias-component/process-type/process-set:
OC4J/home/default_group/
Error
--> Process (index=1,uid=1867980860,pid=540870)
time out while waiting for a managed process to start
Log:
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/logs/OC4J~home~default_group~1
Result code for launching of configuration assistant is: 1
The OUICA command is launched from /usr/home/oracle/product/10.1.3/OracleAS_1/oui/bin/ouica.sh.-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to /usr/home/oracle/product/10.1.3/OracleAS_1
Configuration directory is set to /usr/home/oracle/product/10.1.3/OracleAS_1/cfgtoollogs. All xml files under the directory will be processed
The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
Execute file /usr/home/oracle/product/10.1.3/OracleAS_1/cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
echo OPMN Configuration Assistant
/usr/home/oracle/product/10.1.3/OracleAS_1/opmn/bin/opmnctl startall
Error:*** Alert: One or more "Recommended" configuration assistants have not completed successfully. Not successfully running any "Recommended" assistant means your system will not be correctly configured. A list of the assistants that need to be run is generated in the log of this session which is located at:
/usr/home/oracle/oraInventory/logs/installActions2008-03-24_12-37-24PM.log ***
User Selected: Yes/OK
Warning:*** Alert: A configuration script needs to be run as root before installation can proceed. Leaving this window open, open another window and run '/usr/home/oracle/product/10.1.3/OracleAS_1/root.sh' as root, then return to this window and click OK to continue. ***
User Selected: Yes/OK
*** End of Installation Page***
The installation of Oracle Application Server 10g was successful, but some optional configuration assistants failed, were cancelled or skipped.
Warning:*** Alert: Do you really want to exit? ***
User Selected: Yes/OK
The OUICA command is launched from /usr/home/oracle/product/10.1.3/OracleAS_1/oui/bin/ouica.sh.
User Exit-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to /usr/home/oracle/product/10.1.3/OracleAS_1
Configuration directory is set to /usr/home/oracle/product/10.1.3/OracleAS_1/cfgtoollogs. All xml files under the directory will be processed

Unable to start OC4J standalone server.

Hi
I have just started using Oracle 10g Portal Server. I have downladed the OC4J standalone and have installed at D:\JDeveloper\oc4j following the instructions of running the admin.jar creating the password. When I try starting the OC4J initializing it works fine starts the server with the message
05/12/29 12:21:11 Oracle Containers for J2EE 10g (10.1.3.0.0) - Developer Preview 4 initialized
But when I try to deploy a war file which I have created externally with the entries in aplication.xml
<web-module id="mywar" path="../applications/mywar.war" />
and default-web-site.xml
<web-app application="default" name="mywar" root="/technology/mywar" />
The server never starts up just hangs up with the message
Starting OC4J from D:\JDeveloper\oc4j\j2ee\home ...
If the entries are removed the server starts as usual.
Can anyone let me know where is the problem I need to look at, because the war file works fine if deployed in tomcat or weblogic.
Thanks in advance.

Hi,
As you asked me it is a simple war deployment. with the folder structure as
simpleWar->index.jsp
simpleWar->META-INF->application.xml
simpleWar->WEB-INF->classes
simpleWar->WEB-INF->lib
simpleWar->WEB-INF->tld
simpleWar->WEB-INF->struts-config.xml
simpleWar->WEB-INF->validation.xml
simpleWar->WEB-INF->validator-rules.xml
simpleWar->WEB-INF->web.xml
and the war file that I am creating is simpleWar.war.
The contents of web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
<servlet>
<servlet-name>action</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>3</param-value>
</init-param>
<init-param>
<param-name>detail</param-name>
<param-value>3</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>

<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>

<welcome-file-list>
<welcome-file>index.jsp</welcome-file>
</welcome-file-list>

<taglib>
<taglib-uri>struts-html</taglib-uri>
<taglib-location>/WEB-INF/tld/struts-html.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>struts-bean</taglib-uri>
<taglib-location>/WEB-INF/tld/struts-bean.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>struts-logic</taglib-uri>
<taglib-location>/WEB-INF/tld/struts-logic.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>util-tags</taglib-uri>
<taglib-location>/WEB-INF/tld/tag-util.tld</taglib-location>
</taglib>
<taglib>
<taglib-uri>example-taglib</taglib-uri>
<taglib-location>/WEB-INF/tld/tag-util.tld</taglib-location>
</taglib>
</web-app>

Unable to start OC4J with JDeveloper 903

Hello,
I got the following error message when I try to start the oc4j shipped with jdev903. Could anyone please let me know why I am getting the error message below, and how to fix it:
Java path is poiting to e:\jdk1.3.1_07
OS : windows /2000
E:\JDeveloper\j2ee\home>java -jar oc4j.jar
# HotSpot Virtual Machine Error, Internal Error
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Error ID: 4649454C44345950450E4350500029
# Problematic Thread: prio=5 tid=0x234a10 nid=0x9a0 runnable
Do I need to report this error to Sun or Oracle?
How do I fix this error?
Thanks.
ATN

This one should go to Sun.
Try OC4J with the VM installed with JDeveloper. Also, you might want to try 1.3.1_02 (just to see if that works on your machine)
Rob

Unable to start Oracle Application Server processes

I am having the same problem that a number of people have
mentioned concerning ORA-20214 Unable to start OAS processes ...
The problem seems related to Windows NT 4.0 SP4. One developer
mentioned a specific Oracle Bug #768386 that had something to do
with the yt40.dll. Does anyone know how I can get this patch?
Has anyone gotten OAS to work on SP4 without this patch? Thanks
for any assistance you can provide.
null

Dear James, Anirudh,
Right now I have installed this two syned version.
Oracle Application Server SOA suite 10.1.3.1.0
JDev 10.1.3.1.0
Problem is, I have deployed complete Application server, But I am receiving the following errors.
*No OC4J process up for AS instance identified by domain:
opmn-orabpel+oc4j-anne-8888-default*
1. Actually i gave instance name as --> orabpel
username as --> oc4jadmin
password --> welcome1
But when I trying to connect server with mentioned instance name, I am not able to connect. Is there any specification to set instance name in SOA suite 10.1.3.1.0. Also please suggest how to start my Application server.
2. My doubt is while creating Application server connection from JDEV what we have to select
1. Standalone OC4J 10g 10.1.3
2. Oracle Application Server 10g 10.1.3
3. From the beginning itself my application server status was down. I cant able to understand the under laying issues.
Please suggest me..
Thanks,
Rajesh

Accessgate is unable to contact any access servers

Hi friends,
I have created two different domains for OIM and OAM PS1, trying to integrate them. After removing IAMSUITEAGENT, have installed a Oracle WEBGATE ( accessgate).
Webgate and OHS are in same LINUX BOX( hostname : POC) ... But when i start OHS following error is diplayed.
Message from syslogd@ at Sun Aug 25 17:21:44 2013 ...
POC Oblix: 2013/08/25@21:21:44.24670 11693   11703 ACCESS_GATE     FATAL   0x00001520 /ade/aime_ngamac_279059/ngamac/src/palantir/webgate2/src/apache2entry_web_gate.cpp:597 "Exception thrown during WebGate initialization"
Message from syslogd@ at Sun Aug 25 17:21:44 2013 ...
POC Oblix: 2013/08/25@21:21:44.24711 11693   11703 ACCESS_GATE     FATAL   0x0000182C /ade/aime_ngamac_279059/ngamac/src/palantir/webgate2/src/apache2entry_web_gate.cpp:598 "The AccessGate is unable to contact any Access Servers."       raw_code^301 ...
Even I tried for telnet... hostname: POC.COM ( IP is 172.16.30.188)
Result:
telnet POC.COM
Trying 172.16.30.188...
telnet: connect to address 172.16.30.188: Connection refused
telnet: Unable to connect to remote host: Connection refused....
Any resolution or anything missing in installation or configuration????

yes .. I found 3 different access gate folders in OUTPUT folder....
Now copied ObAccessClient.xml and cwallet.sso from appropriate access gate folder to OHS instance config folder
Restarted OHS
but still it shows ....
Message from syslogd@ at Mon Aug 26 16:15:53 2013 ...
POC Oblix: 2013/08/26@20:15:53.25212 20892   20903   ACCESS_GATE     FATAL   0x00001520      /ade/aime_ngamac_279059/ngamac/src/palantir/webgate2/src/apache2entry_web_gate.cpp:597 "Exception thrown during WebGate initialization"
Message from syslogd@ at Mon Aug 26 16:15:53 2013 ...
POC Oblix: 2013/08/26@20:15:53.25252 20892   20903   ACCESS_GATE     FATAL   0x0000182C      /ade/aime_ngamac_279059/ngamac/src/palantir/webgate2/src/apache2entry_web_gate.cpp:598 "The AccessGate is unable to contact any Access Servers."       raw_code^301
and /usr/sbin/lsof -i:5575
gives nothing .. I think access server is not listeing on 5575 ?????
telnet kolea.tdc.com 7001
Trying 172.16.30.188...
Connected to kolea.tdc.com (172.16.30.188).
Escape character is '^]'.
Connection closed by foreign host.
[oracle@kolea softwares]$ telnet kolea.tdc.com 5585
Trying 172.16.30.188...
telnet: connect to address 172.16.30.188: Connection refused
telnet: Unable to connect to remote host: Connection refused.

I am unable to start two oc4j servers (stand alone)

Similar Messages

Maybe you are looking for