I applied security update 2014-002 and mail client no longer can send to gmail

Has anybody else seen this issue/ is there a solution? The company I do consulting for use gmail for their corporate email hosting. After the security update was applied, my Mavericks mail client stopped talking to gmail. I tried recreating the account, cleaned out passwords from my keychain, etc. Eventually, it started receiving incoming email, but nothing goes out via the google smtp server.

I get the same issue with a smaller service provider than Google ( Celeonet) which host our website and services.
I was away for some days and let my MBP do the update by itself during this period.
Mail show a popup that recommand to:
- check the adress of the receiver
- check smtp parameters
I'm sure of the adress, and smtp parameters didn't change.
I made a diagnostic inside Mail, and everything seems to be ok. (green dot everywhere)

Similar Messages

Security Update 2008-002 and Mail Services on OS X Server 10.4.11

A word of caution before applying Security Update 2008-002 to OS X Server 10.4.11:
According to this document:
http://docs.info.apple.com/article.html?artnum=307562
the security update updates ClamAV to 0.92.1. Which is fine.
What the document, doesn't tell is that spamassassin, amavisd and what is worse, configuration files, get overwritten in the process as well (without software actually being updated).
This has some side effects which unfortunately vary from system to system and configuration to configuration.
If you never updated ClamAV, spamassassin or amavisd manually check that:
-/etc/mail/spamassassin/local.cf, /etc/mail/spamassassin/init.pre and /etc/amavisd.conf didn't get overwritten thus loosing your personalised settings (if any)
-/etc/spam/clamav/clamd.conf and /etc/spam/clamav/freshclam.conf didn't get overwritten thus loosing your personalised settings (if any)
If you have manually updated spamassassin or amavisd check that:
-/etc/mail/spamassassin/local.cf, /etc/mail/spamassassin/init.pre and /etc/amavisd.conf didn't get overwritten thus loosing your personalised settings AND causing issues with your current versions.
-/usr/bin/amavisd didn't get overwritten. If it did re-install amavisd as you did the first time
-/usr/bin/spamassassin didn't get overwritten. If it did re-install spamassassin as you did the first time
HTH,
Alex

Thanks pterobyte for Your support,
I have update 2008-002 last week, I never updated ClamAV, spamassassin or amavisd manually,
and check / reload personalized settings after installation.
The system has worked very fine in the last days, but today I have had postfix queue with more messages not delivered and following error:
host 127.0.0.1[127.0.0.1] said: 451 4.5.0 Error in processing, id=01334-01, virus_scan FAILED: virus_scan: ALL VIRUS SCANNERS FAILED: ClamAV-clamd av-scanner FAILED: Too many retries to talk to /var/clamav/clamd.sock (Can't connect to UNIX socket /var/clamav/clamd.sock: No such file or directory) at (eval 42) line 266.; ClamAV-clamscan av-scanner FAILED: /usr/local/bin/clamscan unexpected exit 50, output="ERROR: Can't initialize the virus database" at (eval 42) line 435. (in reply to end of DATA command)
I have tried with unload/load amavisd and reload postfix,
not launch mailbfr to fix db , I was losing too much time and for productivity reasons I have temporary reload prev backup of 2008-002.

Security update 2014-002 and boot up time

Hi all,
After installing the Security Update 2014-002, my Mac Pro is taking over 10 minutes to start. I get a grey screen and eventually the Apple logo appears.
I've unplugged everything from the computer and repair permissions already. I've tried to boot in recovery mode, but it never seems to start (waiting on the grey screen for over 20 minutes while my fingers are on the keys isn't a fun time).
Any suggestions would help. Thanks.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of diagnostic report, such as hang logs—they're very long and not helpful.

Just did a security update 2014-002 and since then everything is very slow loading if they load at all

Just did a Security update 2014-002, Now everything loads very slow if at all

I can not load ANY 3rd party applications after this update. It took my machine 10-15 to boot up and after I finally got to the desktop, I can only open Apple apps. Applications like MS Office, Adobe Reader, Google Chrome are ALL crashing and loading error messages. Below is the first part of the kernel panic:
Process:         Microsoft Excel [1536]
Path:            /Applications/Microsoft Office 2008/Microsoft Excel.app/Contents/MacOS/Microsoft Excel
Identifier:      com.microsoft.Excel
Version:         12.3.6 (12.3.6)
Build Info:      Unknown-130206~0
Code Type:       X86 (Native)
Parent Process: launchd [268]
Date/Time:       2014-04-22 22:53:55.704 -0600
OS Version:      Mac OS X 10.7.5 (11G63)
Report Version: 9
Interval Since Last Report:          564119 sec
Crashes Since Last Report:           271
Per-App Interval Since Last Report: 1261523 sec
Per-App Crashes Since Last Report:   1
Anonymous UUID:                      77C83148-C544-4325-AC93-ACFBA581E850
Crashed Thread: 0
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
I would boot to CD and restore to last back-up before the security update, but since I'm in the middle of a move, I have no CD available. I'm running OS 10.7.5 because my machine can't run Mavericks.
Message was edited by: SherryDiGi

Downloaded security update 2014-002 now computer is freezing. Can I uninstall it?

Can I uninstall security update for Lion 2014-002? Afte repairing permissions before and after the download, the computer is freezing and needs restarting if not in use for several minutes.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V. Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report—it will be very long and not helpful.

Restarting taking forever after Security Update 2014-002

I just downloaded Security Update 2014-002 and my Mac Mini is taking forever to restart after the download and installation process finished. I'm running the latest version of Mavericks and my Mac is stuck on restart! What should I do?
Need help! Thanks.

Tap the space bar on your keyboard once. The dispaly may be sleeping.
The first restart after the update here was longer than usual but I restarted one more time, it was back to normal boot time.
After the restart, open the App Store then select Updates from the menu.
It should say: Verio 1.0 Installed Apr 22, 2014

Slow Sleep Wake-Up after Security Update 2014-002 MacBook Air

Hello! I have a 2013 August MacBook Air. I experienced the "screen goes black, hard restart" issue for many months until one of the updates cured that issues, thank goodness. I just updated with Security Update 2014-002 and just noticed it took about 20 seconds for my MacBook Air to wake-up from sleep mode. I was fearful it was back to the "black screen, no wake-up" issue with this update, however when it finally came back up I was relieved albeit very cautious now. Anyone else have this same issue?

Hello macforme
If you are having issues with waking from sleep and slow startup times, then check out the article below. The main thing to try is to reset the SMC and NVRAM as a starting point sort the issue out.
OS X: When your Mac doesn't sleep or wake
http://support.apple.com/kb/TS5357
Regards,
-Norm G.

Recent Security Update 2014-002 Causing Finder Crash - QuartzComposer Plugin

Hello,
Recently updated Mavericks with the Security Update 2014-002 and now getting Finder crashes on login. Seems to relate to the QuartzComposer plugin.
No task bar at the top of the screen, just desktop wallpaper and looping Finder crash that can't be resolved. I have the crash log, but not posted one before. Is it safe to post the whole thing online?
Pressing the power button and forcing a restart often fixes the problem but it happening relatively frequently now on each startup and I would like to resolve this. Can't find much on the forums at the moment.
Please help.
Many thanks
Sam

Is it safe to post the whole thing online?
Yes, but make sure there is no personal information in it, which there usually isn't.

Security Update 2014-002 breaks Active Directory

Installed Security Update 2014-002 and now Macs in our office are unable to communicate with the domain controller, and new machines with the update can't bind to the domain.
My specific machine is a 2013 Mac Pro with OS 10.9.2.
Anyone else?

I connected the charger many times it didn't worked. Yes exactly it stopped charging. Then i tried again and again removing and moving the pin and it worked suddenly. i wasn't able to imagine that i purchased it in 2014 January. How it is possible that the brand new and so expensive item behave like this.
The problem i was facing is solved too after this behavior. As soon as my laptop started charging i switch from one screen to another right/left dashboard. Scroll up/down in safari. It is moving the same as before amazing fast.
I didn't installed or uninstalled anything as others did. I didn't understood at all how come the charger was stopped charging and how such awkard problems happened that made the laptop so slow that it behaves like it is dying or maybe something went wrong with the graphic card.
Thanks for helping.

Security Update 2014-002 Black boxes and screen sticking

Today after installing the security update 2014-002 on mavericks i am getting black boxes or black backgrounds when shifting screens. In Safari when i am scrolling down it is behaving the same way displaying text and pictures stuck wile moving. Is there any way to get one step back or to delete the new update. Please, help me solving this issue. I shouldn't had updated. The updates are so unreliable.
I went to safe mode and it becomes worse in safe mode.

I connected the charger many times it didn't worked. Yes exactly it stopped charging. Then i tried again and again removing and moving the pin and it worked suddenly. i wasn't able to imagine that i purchased it in 2014 January. How it is possible that the brand new and so expensive item behave like this.
The problem i was facing is solved too after this behavior. As soon as my laptop started charging i switch from one screen to another right/left dashboard. Scroll up/down in safari. It is moving the same as before amazing fast.
I didn't installed or uninstalled anything as others did. I didn't understood at all how come the charger was stopped charging and how such awkard problems happened that made the laptop so slow that it behaves like it is dying or maybe something went wrong with the graphic card.
Thanks for helping.

Security update 2014-002 grey sceen

Hi, I have tried to install security update 2014-002. It tells me that a restart is required. It takes me to a grey screen an installer of some sort an then hangs.
I turned it off. Started it again, It has removed my desktop picture and still shows that I require the update to be installed also I noticed that it show the update has been install.
anyone????
Regards
Neico

If you are able to get back to the normal desktop screen, backup your data.
To apply the update, download it directly from:
http://support.apple.com/kb/DL1740
And then run its installer.
If Software Update still shows it, you can set it to ignore the update.
Repair permissions when done installing it, as sometimes a few might get messed up.
Note: Permissions Repair will always show some needing repair no matter how many times you repair it. That should not be of concern.

Unable to install the security update 2014-002 1.0 on 10.9.2

I'm trying to update my Mac Book AIR 1.7 GHZ i5 4 GB with the security update 2014-002 1.0 on 10.9.2. After downloading via Mac App Store it restarts the machine and shows a message "Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut." Next Maverick starts normal and isn't updated. i tried this several times. Alternatively i downloaded the SecUpd2014-002Mavericks.dmg manually directly from Apple but then i get an error that the DMG is corrupt so i can't start the update. I also downloaded the OSXUpdCombo10.9.3_13D45a.pkg but while running the installer it verifies the package with the result "Beim Extrahieren von Dateien aus dem Paket OSXUpdCombo10.9.3_13D45a.pkg ist ein Fehler aufgetreten." Any ideas?
install.log -> search: "error"
May 2 17:37:52 USERs-MacBook-Air.local installd[413]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7fdd4840b2e0 {NSUnderlyingError=0x7fdd4aa2d4b0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/97B9287F-0F5A-4148-A72A-8384ADB05D3E.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten.} {
              NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7fdd4c1eb310 {NSURL=file:///Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg#Payload, NSFileOwnerAccountID=501, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29890335, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=946426437, NSFileGroupOwnerAccountID=20, NSFileOwnerAccountName=USER, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-19 01:15:52 +0000, NSFileType=NSFileTypeRegular, NSFileExtendedAttributes={\n    \"com.apple.metadata:kMDItemDownloadedDate\" = <62706c69 73743030 a1013341 b913e6cc 7b0e5e08 0a000000 00000001 01000000 00000000 02000000 00000000 00000000 00000000 13>;\n    \"com.apple.metadata:kMDItemWhereFroms\" = <62706c69 73743030 a1015f10 37687474 703a2f2f 6d697272 6f722e73 68616465 2e73682f 6f73782f 4f535855 7064436f 6d626f31 302e392e 335f3133 44343561 2e706b67 080a0000 00000000 01010000 00000000 00020000 00000000 00000000 00000000 0044>;\n    \"com.apple.quarantine\" = <30303232 3b353336 33616634 633b5361 66617269 3b334242 42364136 462d4241 44422d34 4643382d 39373743 2d454533 37413644 37323833 36>;\n}, NSFileGroupOwnerAccountName=staff, NSFileReferenceCount=1, NSFileModificationDate=2014-05-02 14:44:30 +0000, NSLocalizedDescription=archive verify failed}";
May 2 17:37:52 USERs-MacBook-Air.local Installer[364]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f88a3c936a0 {NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/97B9287F-0F5A-4148-A72A-8384ADB05D3E.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSUnderlyingError=0x7f88a1433da0 "archive verify failed"}
May 2 17:57:32 USERs-MacBook-Air.local installd[413]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7fdd4be94350 {NSUnderlyingError=0x7fdd4be639b0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/905EE9AF-A09C-41B4-A499-BBC7CBF8EE21.activeSandbox/Root, NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.security.10.9.2.13C1021.2014.00 2, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten.} {
              NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7fdd4be66f70 {NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg#Payload , NSFileOwnerAccountID=0, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29908846, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=79945153, NSFileGroupOwnerAccountID=0, NSFileOwnerAccountName=root, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-18 13:03:26 +0000, NSFileType=NSFileTypeRegular, NSFileGroupOwnerAccountName=wheel, NSFileReferenceCount=1, NSFileModificationDate=2014-04-18 13:03:26 +0000, NSLocalizedDescription=archive verify failed}";
May 2 17:57:33 USERs-MacBook-Air.local softwareupdated (200)[294]: SoftwareUpdate: extraction error on install of zzz031-01022 (reset to download error state to allow retry): Error Domain=SUErrorDomain Code=311 "Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut." UserInfo=0x7fe9fb2536a0 {SUErrorUpdateTitle=Sicherheitsupdate 2014-002, SUErrorUpdateProductKey=zzz031-01022, NSLocalizedDescription=Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut.}
                      ErrorCode = 311;
                      ErrorDomain = SUErrorDomain;
                      State = Error;
May 3 03:13:20 USERs-MacBook-Air.local installd[3605]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f8651614cf0 {NSUnderlyingError=0x7f865158e4a0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/4B96CA6E-3B5B-4D06-A6C1-4EA3D5870BF7.activeSandbox/Root, NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.security.10.9.2.13C1021.2014.00 2, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten.} {
              NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7f8653a1d360 {NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg#Payload , NSFileOwnerAccountID=0, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29933100, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=79945153, NSFileGroupOwnerAccountID=0, NSFileOwnerAccountName=root, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-18 13:03:26 +0000, NSFileType=NSFileTypeRegular, NSFileGroupOwnerAccountName=wheel, NSFileReferenceCount=1, NSFileModificationDate=2014-04-18 13:03:26 +0000, NSLocalizedDescription=archive verify failed}";
May 3 08:59:17 USERs-MacBook-Air.local installd[5628]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f9b24957020 {NSUnderlyingError=0x7f9b23b108c0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/87B152A2-C38A-4DE3-AB2A-886C601C3DC5.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten.} {
              NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7f9b216eb370 {NSURL=file:///Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg#Payload, NSFileOwnerAccountID=501, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29890335, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=946426437, NSFileGroupOwnerAccountID=20, NSFileOwnerAccountName=USER, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-19 01:15:52 +0000, NSFileType=NSFileTypeRegular, NSFileExtendedAttributes={\n    \"com.apple.metadata:kMDItemDownloadedDate\" = <62706c69 73743030 a1013341 b913e6cc 7b0e5e08 0a000000 00000001 01000000 00000000 02000000 00000000 00000000 00000000 13>;\n    \"com.apple.metadata:kMDItemWhereFroms\" = <62706c69 73743030 a1015f10 37687474 703a2f2f 6d697272 6f722e73 68616465 2e73682f 6f73782f 4f535855 7064436f 6d626f31 302e392e 335f3133 44343561 2e706b67 080a0000 00000000 01010000 00000000 00020000 00000000 00000000 00000000 0044>;\n    \"com.apple.quarantine\" = <30303232 3b353336 33616634 633b5361 66617269 3b334242 42364136 462d4241 44422d34 4643382d 39373743 2d454533 37413644 37323833 36>;\n}, NSFileGroupOwnerAccountName=staff, NSFileReferenceCount=1, NSFileModificationDate=2014-05-02 14:44:30 +0000, NSLocalizedDescription=archive verify failed}";
May 3 08:59:17 USERs-MacBook-Air.local Installer[5617]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f9cc541e860 {NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/87B152A2-C38A-4DE3-AB2A-886C601C3DC5.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSUnderlyingError=0x7f9cc5450cb0 "archive verify failed"}

I'm trying to update my Mac Book AIR 1.7 GHZ i5 4 GB with the security update 2014-002 1.0 on 10.9.2. After downloading via Mac App Store it restarts the machine and shows a message "Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut." Next Maverick starts normal and isn't updated. i tried this several times. Alternatively i downloaded the SecUpd2014-002Mavericks.dmg manually directly from Apple but then i get an error that the DMG is corrupt so i can't start the update. I also downloaded the OSXUpdCombo10.9.3_13D45a.pkg but while running the installer it verifies the package with the result "Beim Extrahieren von Dateien aus dem Paket OSXUpdCombo10.9.3_13D45a.pkg ist ein Fehler aufgetreten." Any ideas?
install.log -> search: "error"
May 2 17:37:52 USERs-MacBook-Air.local installd[413]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7fdd4840b2e0 {NSUnderlyingError=0x7fdd4aa2d4b0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/97B9287F-0F5A-4148-A72A-8384ADB05D3E.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten.} {
              NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7fdd4c1eb310 {NSURL=file:///Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg#Payload, NSFileOwnerAccountID=501, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29890335, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=946426437, NSFileGroupOwnerAccountID=20, NSFileOwnerAccountName=USER, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-19 01:15:52 +0000, NSFileType=NSFileTypeRegular, NSFileExtendedAttributes={\n    \"com.apple.metadata:kMDItemDownloadedDate\" = <62706c69 73743030 a1013341 b913e6cc 7b0e5e08 0a000000 00000001 01000000 00000000 02000000 00000000 00000000 00000000 13>;\n    \"com.apple.metadata:kMDItemWhereFroms\" = <62706c69 73743030 a1015f10 37687474 703a2f2f 6d697272 6f722e73 68616465 2e73682f 6f73782f 4f535855 7064436f 6d626f31 302e392e 335f3133 44343561 2e706b67 080a0000 00000000 01010000 00000000 00020000 00000000 00000000 00000000 0044>;\n    \"com.apple.quarantine\" = <30303232 3b353336 33616634 633b5361 66617269 3b334242 42364136 462d4241 44422d34 4643382d 39373743 2d454533 37413644 37323833 36>;\n}, NSFileGroupOwnerAccountName=staff, NSFileReferenceCount=1, NSFileModificationDate=2014-05-02 14:44:30 +0000, NSLocalizedDescription=archive verify failed}";
May 2 17:37:52 USERs-MacBook-Air.local Installer[364]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f88a3c936a0 {NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/97B9287F-0F5A-4148-A72A-8384ADB05D3E.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSUnderlyingError=0x7f88a1433da0 "archive verify failed"}
May 2 17:57:32 USERs-MacBook-Air.local installd[413]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7fdd4be94350 {NSUnderlyingError=0x7fdd4be639b0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/905EE9AF-A09C-41B4-A499-BBC7CBF8EE21.activeSandbox/Root, NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.security.10.9.2.13C1021.2014.00 2, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten.} {
              NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7fdd4be66f70 {NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg#Payload , NSFileOwnerAccountID=0, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29908846, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=79945153, NSFileGroupOwnerAccountID=0, NSFileOwnerAccountName=root, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-18 13:03:26 +0000, NSFileType=NSFileTypeRegular, NSFileGroupOwnerAccountName=wheel, NSFileReferenceCount=1, NSFileModificationDate=2014-04-18 13:03:26 +0000, NSLocalizedDescription=archive verify failed}";
May 2 17:57:33 USERs-MacBook-Air.local softwareupdated (200)[294]: SoftwareUpdate: extraction error on install of zzz031-01022 (reset to download error state to allow retry): Error Domain=SUErrorDomain Code=311 "Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut." UserInfo=0x7fe9fb2536a0 {SUErrorUpdateTitle=Sicherheitsupdate 2014-002, SUErrorUpdateProductKey=zzz031-01022, NSLocalizedDescription=Sicherheitsupdate 2014-002 konnte nicht verifiziert werden. Es wurde beim Laden möglicherweise beschädigt oder verändert. Klicken Sie auf „Aktualisieren“, um es zu laden und prüfen Sie das Update erneut.}
                      ErrorCode = 311;
                      ErrorDomain = SUErrorDomain;
                      State = Error;
May 3 03:13:20 USERs-MacBook-Air.local installd[3605]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f8651614cf0 {NSUnderlyingError=0x7f865158e4a0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/4B96CA6E-3B5B-4D06-A6C1-4EA3D5870BF7.activeSandbox/Root, NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.security.10.9.2.13C1021.2014.00 2, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „SecUpd2014-002Mavericks.pkg“ ist ein Fehler aufgetreten.} {
              NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7f8653a1d360 {NSURL=file:///Library/Updates/zzz031-01022/SecUpd2014-002Mavericks.pkg#Payload , NSFileOwnerAccountID=0, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29933100, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=79945153, NSFileGroupOwnerAccountID=0, NSFileOwnerAccountName=root, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-18 13:03:26 +0000, NSFileType=NSFileTypeRegular, NSFileGroupOwnerAccountName=wheel, NSFileReferenceCount=1, NSFileModificationDate=2014-04-18 13:03:26 +0000, NSLocalizedDescription=archive verify failed}";
May 3 08:59:17 USERs-MacBook-Air.local installd[5628]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f9b24957020 {NSUnderlyingError=0x7f9b23b108c0 "archive verify failed", NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/87B152A2-C38A-4DE3-AB2A-886C601C3DC5.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten.} {
              NSUnderlyingError = "Error Domain=PKXARArchiveErrorDomain Code=101 \"archive verify failed\" UserInfo=0x7f9b216eb370 {NSURL=file:///Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg#Payload, NSFileOwnerAccountID=501, NSFileHFSTypeCode=0, NSFileSystemFileNumber=29890335, NSFileExtensionHidden=false, NSFileSystemNumber=16777220, NSFileSize=946426437, NSFileGroupOwnerAccountID=20, NSFileOwnerAccountName=USER, NSFilePosixPermissions=420, NSFileHFSCreatorCode=0, NSFileCreationDate=2014-04-19 01:15:52 +0000, NSFileType=NSFileTypeRegular, NSFileExtendedAttributes={\n    \"com.apple.metadata:kMDItemDownloadedDate\" = <62706c69 73743030 a1013341 b913e6cc 7b0e5e08 0a000000 00000001 01000000 00000000 02000000 00000000 00000000 00000000 13>;\n    \"com.apple.metadata:kMDItemWhereFroms\" = <62706c69 73743030 a1015f10 37687474 703a2f2f 6d697272 6f722e73 68616465 2e73682f 6f73782f 4f535855 7064436f 6d626f31 302e392e 335f3133 44343561 2e706b67 080a0000 00000000 01010000 00000000 00020000 00000000 00000000 00000000 0044>;\n    \"com.apple.quarantine\" = <30303232 3b353336 33616634 633b5361 66617269 3b334242 42364136 462d4241 44422d34 4643382d 39373743 2d454533 37413644 37323833 36>;\n}, NSFileGroupOwnerAccountName=staff, NSFileReferenceCount=1, NSFileModificationDate=2014-05-02 14:44:30 +0000, NSLocalizedDescription=archive verify failed}";
May 3 08:59:17 USERs-MacBook-Air.local Installer[5617]: install:didFailWithError:Error Domain=PKInstallErrorDomain Code=110 "Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten." UserInfo=0x7f9cc541e860 {NSLocalizedDescription=Beim Extrahieren von Dateien aus dem Paket „OSXUpdCombo10.9.3_13D45a.pkg“ ist ein Fehler aufgetreten., NSFilePath=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/PKInstallSandboxMan ager/87B152A2-C38A-4DE3-AB2A-886C601C3DC5.activeSandbox/Root, NSURL=file://localhost/Users/USER/Downloads/OSXUpdCombo10.9.3_13D45a.pkg, PKInstallPackageIdentifier=com.apple.pkg.update.os.10.9.3.13D45a.combo, NSUnderlyingError=0x7f9cc5450cb0 "archive verify failed"}

After installing last Security Update 2014–002 i've had problems when trying to open some apps, as they close unespectedly. Boom, Audacity, Dropbox are some of these apps...

Yesterday (april 22) I install the last Security Update 2014–002 from the Mac App Store. After rebooting the computer, I haven't been able to run some apps I use frequently, such as Boom Device, Dropbox, Google Drive, wich didn't show in the menu bar anymore and don't run even when clicking on their icons; or apps like Audacity (open source sound editor), All2mp3 (sound files converter to mp3); and other apps bought from the Mac App Store, as Funtastic Photos. This problem affects even applications as Word, Excel and Powerpoint... I think the problem has reached it's highest levels and I would like to know what can I do in order to reverse my iMac to a "normal" life... I should say that I haven't had any problems with any of the several Web Browsers I commonly use...

I have the sam problem with Firefox and Word. Annoying, please help me. Word does not open at all(still Excel and Powerpoint do, Firefox get a lot of problems, and shuts down.

HT3964 Security Update 2014-002 version 1.0 Issues

My MacBook Air was working fine until the Security Update 2014-002 version 1.0 was installed on Apr 24, 2014. Ever since then, it goes into deep hibernation or shutdown/restart on its own. How would I resolve this without a TimeMachine backup? Thank-you.

Hey there MAK-SJ,
It sounds like your computer is going to sleep and/or restarting by itself after a recent update. I would start by checking to see if there are any Hot Corners that may have gotten enabled somehow with this:
OS X: When your Mac doesn't sleep or wake
http://support.apple.com/kb/TS5357
Your computer sleeps at unexpected times
Make sure you have not set a Hot Corner that tells the display to sleep, or the computer to sleep.
See the following related articles for this symptom.
OS X: If your computer screen goes black
Magnets in devices may cause computer to sleep unexpectedly
If this is not the case, I would use the troubleshooting from the Additional Troubleshooting section of the article down toward the bottom.
Thank you for using Apple Support Communities.
All the best,
Sterling

Download notification for Security Update 2014-002 does not go away after update

I have downloaded the Security Update 2014-002 4 times tonight, it shows up in the downloaded and installed list, but it still is showing up as an update ready to download. I restarted my machine each time, but it still is showing up in the update notifications. Can anyone help?
Thanks,
George

Go to the command line of the appliacne and run "version"
That will show you the current version of the firmware.
If you have record of what was there, you can compare...
Otherwise contact TAC, they can verify that you have the up-to-date version and pull your serial from the distribution list so you don't see it any more.
Ken

I applied security update 2014-002 and mail client no longer can send to gmail

Similar Messages

Maybe you are looking for