I-bot not emailing when report returns large result set..

Hi,
I am trying to set up an i-bot to run daily and email the results to the user. Assuming the report in question is Report_A.
Report_A returns around 60000 rows of data without any filter condition. When I tried to set up thei-bot for Report_A (No filter conditions on the report) the ibot is publishing results to dashboard but is not delivering via email. When I introduce a filter in Report_A to reduce the data returned then everything works fine and email is being sent out successfully.
So
1) Is there a size limit for i-bots to deliver by email?
2) Is there a way to increase the limits if any so the report can be emailed even when returning large result sets?
Please let me know.

Sorry for late reply
Below is the log file for one of the i-bots. Now I am getting an error message "***kmsgPortalGoRequestHasBeenCancelled: message text not found ***" and the i-bot alert message shows as "Cancelled".
+++ ThreadID: f3c6cb90 : 2010-12-17 23:55:04.551
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: ***kmsgPortalGoRequestHasBeenCancelled: message text not found ***
Error Codes: YLKKAV7S
Error Codes: AGEGTYVF
+++ ThreadID: f3c6cb90 : 2010-12-17 23:55:04.553
iBotID: /shared/_ibots/common/TM/Claims Report
...Trying iBot Get Response Content loop again.
+++ ThreadID: f3c6cb90 : 2010-12-17 23:55:04.554
... Sleeping for 8 seconds.
+++ ThreadID: f3c6cb90 : 2010-12-17 23:55:12.642
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: ***kmsgPortalGoRequestHasBeenCancelled: message text not found ***
Error Codes: YLKKAV7S
Error Codes: AGEGTYVF
+++ ThreadID: f3c6cb90 : 2010-12-17 23:55:12.644
iBotID: /shared/_ibots/common/TM/Claims Report
...Trying iBot Get Response Content loop again.
+++ ThreadID: f3c6cb90 : 2010-12-17 23:55:12.644
... Sleeping for 6 seconds.
+++ ThreadID: f3c6cb90 : 2010-12-17 23:55:18.730
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: ***kmsgPortalGoRequestHasBeenCancelled: message text not found ***
Error Codes: YLKKAV7S
Error Codes: AGEGTYVF
+++ ThreadID: f3c6cb90 : 2010-12-17 23:55:18.734
iBotID: /shared/_ibots/common/TM/Claims Report
Exceeded number of request retries.

Similar Messages

The 'Do Not Email' when sharing a Document does not always allow a check mark to be entered.

The 'Do Not Email' when sharing a Document does not always allow a check mark to be entered.
Just wanted to report this. I have not checked to see if it has been previously submitted. The issue
is intermittent.

I think this happens because you need to send e-mail when you do the first contact with the user. Tellimg him who you are and etc.
When you already "know" that user, u can check the box.
Hope it helps,
Andrey Farias

Authorization Object is not working when report is modified.

Hi BW Guru's
We have Company Code as Authorization Object .and we have 3 company Codes (xxxx,yyyy,zzzz).where the users under Company code xxxx are not supposed to view company code yyyy,zzzz data etc.
I modified an existing Report and transported to production.But the Authorization Object is not working for that report.The Report is defaultly displaying all the company codes data(xxxx,yyyy) for all the users.But for the other reports its(company code ) is working fine.
What could be the problem?Is theproblem in transporting the objects.But i transported all the objects inluding auhorization object.
Please send me the solution as it is very much urgent.
The solution will be def. awarded with full points.
Regards
Sanjay

hi Sanjay,
please don't post the same question again, check and response back from your previous thread
Re: Authorization Object is not working when report is Modified.
hope this helps.
would be nice if you reward for helpful answers to all of your previous postings, e.g
docs related to RRI

Date not showed when report is viewed in PDF .

Hi,
We have a text field that shows the date on which the report is running.Date is not showed when report is viewed in PDF.But in HTML we can view them . Can any one help me out?
Totally there are four pages for the report.

I have observed the PDF driver iin EPM 11.1.2.x is not up-to-date and technically the Date (Text) is there just like in HTML. However, when you increase the View (Zoom in), it eventually does show up.
I have chatted with Oracle Support, and they will not address it with a patch for now.

Avoid JDBC sender error: Execute statement did not return a result set

Hi!
My JDBC sender adapter towards MS SQL server works fine, with an Execute statement calling a stored procedure that returns the source data needed. The stored procedure itself updates the status of database table records, so that only the unread records are returned each time the stored procedure is called.
However, the communication channel monitoring sets a red flag for the JDBC sender adapter, when there are no values to fetch from the database table (using the stored procedure). Message says: "Database-level error reported by JDBC driver while executing statement 'EXECUTE FetchMessage 1, 9000'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor."
This is not an error situation, as I do not expect there to be any values to fetch from the database at all times.
I do not see how to change the stored procedure to avoid this error.
Is there a parameter to be set on the JDBC adapter that I can use, so the red flag is avoided?
Thanks for any input!
Regards,
Oeystein Emhjellen

Hi Oeystein Emhjellen.
The problem is Store Procedure that has to generate always a ResultSet (or cursor). If it doesn't have a output, you have to generate an Empty ResultSet.
Like a SELECT Statement:
If there are data, SELECT get an output result but if it get nothing the SELECT Statement get a empty ResultSet.
Ask to your database team.
I hope it helps you.
Bruno.

The statement did not return a result set in ireport

Hi,
I am Building a Report in iReport(Jasper Reports). I called a stored procedure from iReport by passing a parameter in Query Editor. I am getting an exception saying "The statement did not return a result set". When
i use Temp Tables in stored procedure i am getting the exception.
If there is no temptable in Stored procedure there wont be any exception.
This is my Stored procedure
Create PROCEDURE [XUSP_REPORT_SOPRINT] @BNUM VARCHAR(20) AS
BEGIN
DECLARE @FQTY BIGINT
DECLARE @ITNAME VARCHAR(100)
DECLARE @COUNT INT=0
DECLARE @COUNT1 INT=0
CREATE TABLE #BILL_PRINT(
   [BNUM] [varchar](20) NOT NULL,
   [CNAME] [varchar](30) NOT NULL,
   [CNUM] [int] NOT NULL,
   [ITNAME] [varchar](100) NOT NULL,
   [ITEM#] [int] NOT NULL,
   [QTY] [int] NOT NULL DEFAULT 0,
   [UNIT] [varchar](5) NOT NULL,
   [PRICE] [float] NOT NULL DEFAULT 0,
   [BASIC] [float] NOT NULL DEFAULT 0,
   [DISCOUNT] [float] NOT NULL DEFAULT 0,
   [FRQTY] [int] NOT NULL DEFAULT 0,
   [BADDR] [varchar](300) NULL,
   [CADDR] [varchar](300) NOT NULL,
   [BDATE] [datetime] NULL DEFAULT (sysdatetime()),
   [BILLBY] [varchar](50) NOT NULL,
   [ROUTE] [varchar](200) NULL,
   [AMT] [float] NOT NULL DEFAULT 0,
   [VAT] [float] NOT NULL DEFAULT 0,
   [VAT AMT] [float] NOT NULL DEFAULT 0,
   [AMT_AF_DISC] [float] NOT NULL DEFAULT 0,
   [AMT_AF_VAT] [float] NOT NULL DEFAULT 0,
   [TOT_DISC] [float] NOT NULL DEFAULT 0,
   [ROUND_OFF] [float] NOT NULL DEFAULT 0,
   [TOT_VAT] [float] NOT NULL DEFAULT 0,
   [AMT_UNDER_VAT] [float] NOT NULL DEFAULT 0,
   [NETT] [float] NOT NULL DEFAULT 0,
   [TOS] [varchar](30) NULL DEFAULT 0,
   [CDISC] [float] NOT NULL DEFAULT 0,
   [SDISC] [float] NOT NULL DEFAULT 0
insert into #BILL_PRINT SELECT [BNUM]
      ,[CNAME]
      ,[CNUM]
      ,[ITNAME]
      ,[ITEM#]
      ,[QTY]
      ,[UNIT]
      ,[PRICE]
      ,[BASIC]
      ,[DISCOUNT]
      ,[FRQTY]
      ,[BADDR]
      ,[CADDR]
      ,[BDATE]
      ,[BILLBY]
      ,[ROUTE]
      ,[AMT]
      ,[VAT]
      ,[VAT AMT]
      ,[AMT_AF_DISC]
      ,[AMT_AF_VAT]
      ,[TOT_DISC]
      ,[ROUND_OFF]
      ,[TOT_VAT]
      ,[AMT_UNDER_VAT]
      ,[NETT]
      ,[TOS]
      ,[CDISC]
      ,[SDISC]
FROM [SALES_DETAILS] WHERE BNUM=@BNUM
CREATE TABLE #ITNAME_0
ITEM VARCHAR(100) NOT NULL,
FREE BIGINT NOT NULL
INSERT INTO #ITNAME_0 SELECT ITNAME,FRQTY FROM SALES_DETAILS WHERE FRQTY<>0 AND BNUM=@BNUM
--SELECT * FROM #ITNAME_0
SET @COUNT=(SELECT COUNT(*) FROM #ITNAME_0)
WHILE @COUNT!=0
BEGIN
SET @FQTY=(SELECT TOP(1) FREE FROM #ITNAME_0)
SET @ITNAME=(SELECT TOP(1) ITEM FROM #ITNAME_0)
SET @COUNT1=(SELECT COUNT(*) FROM #BILL_PRINT WHERE ITNAME=@ITNAME AND BNUM=@BNUM)
IF @COUNT1=2
BEGIN
   UPDATE #BILL_PRINT
   SET FRQTY+=@FQTY
   WHERE ITNAME=@ITNAME AND QTY<>0
   DELETE FROM #ITNAME_0 WHERE ITEM=@ITNAME AND FREE=@FQTY
   DELETE FROM #BILL_PRINT WHERE ITNAME=@ITNAME AND QTY=0
END
SET @COUNT=@COUNT-1
END
--SELECT *FROM sales_details
SELECT *FROM #BILL_PRINT where bnum=@bnum
DROP TABLE #BILL_PRINT
DROP TABLE #ITNAME_0
END
Please help me out in this.
Thanks,
Shreyas M

This is a forum for Reporting Services (SSRS). If you're using Jasper reports then you should be posting in relevenat forums. I'm not sure there would be enough people with Jasper report experience here to help you out!
Anyways in SSRS when we use Temp tables in procedure it will throw exception in editor but when you save and run it will still work fine. Did you try saving it and executing report? Did the error still persisted?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Web Services with Large Result Sets

Hi,
We have an application where in a call to a web service could potentially yield a large result set. For the sake of argument, lets say that we cannot limit the result set size, i.e., by criteria narrowing or some other means.
Have any of you handled paging when using Web Services? If so can you please share your experiences considering Web Services are stateless? Any patterns that have worked? I am aware of the Value List pattern but am looking for previous experiences here.
Thanks

Joseph Weinstein wrote:
Aswin Dinakar wrote:
I ran the test again and I removed the ResultSet.Fetch_Forward and it
still gave me the same error OutOfMemory.
The problem to me is similar to what Slava has described. I am parsing
the result set in memory storing the results in a hash map and then
emptying the post processed results into a table.
The hash map turns out to be very big and jvm throws a OutOfMemory
Exception.
I am not sure how I can turn this around -
I can partition my query so that it returns smaller chunks or "blocks"
of data each time(say a page of data or two pages of data). Then I can
store a page of data in the table. The problem with this approach is
that it is not exactly transactional. Recovery would be very difficult
in this approach.
I could do this in a try catch block page by page and then the catch
could go ahead and delete the rows that got committed. The question then
becomes what if that transaction fails ?It sounds like you're committing the 'cardinal performance sin of DBMS processing',
of shovelling lots of raw data out of the DBMS, processing it in some small way,
and sending it (or some of it) back. You should instead do this processing in
a stored procedure or procedures, so the data is manipulated where it is. The
DBMS was written from the ground up to be a fast efficient set-based processor.
Using clever SQL will pay off greatly. Build your saw-mills where the trees are.
JoeYes we did think of stored procedures. Like I mentioned yesterday some of the post
processing depends on unicode and specific character sets. Java seemed ideally suited
to this since it handles these unicode characters very well and has all these libraries
we can use. Moving this to DBMS would mean we would make that proprietary (not that we
wont do it if it became absolutely essential) but its one of the reasons why the post
processing happens in java. Now that you mention it stored procedures seem the best
option.

How to handle large result set of a SQL query

Hi,
I have a question about how to handle large result set of a SQL query.
My query returns more than a million records. However, the Query Template has a "row count" parameter. If I don't specify it, it by default returns only 100 lines of records in the query result. If I specify it, then it's limited to a specific number.
Is there any way to get around of this row count issue? I don't want any restriction on the number of records returned by a query.
Thanks a lot!

No human can manage that much data...in a grid, a chart, or a direct-connected link to the brain.
What you want to implement (much like other customers with similar requirements) is a drill-in and filtering model that helps the user identify and zoom in on data of relevance, not forcing them to scroll through thousands or millions of records.
You can also use a time-based paging model so that you only deal with a time "slice" at one request (e.g. an hour, day, etc...) and provide a scrolling window. This is commonly how large datasets are also dealt with in applications.
I would suggest describing your application in more detail, and we can offer design recommendations and ideas.
- Rick

Please Help Urgent:Fast Search returning wrong result sets

Hi All,
We are facing below issue with fast search.
Currently in My project when we are searching for a phrase it is returning wrong result sets.
For example if we search for “Endura”, It is returning documents related to
Endura as well as Centura.
But the expected results are only Endura documents.
When we look in to the documents we didn’t find the search term (“Endura” ) either inside document content or in its meta data.
In order to resolve the issue we tried the below steps
1-
We manually edited and saved the document, to ensure the appropriate Guid association to metadata.
2-
Index reset
3-
Full crawl
But no luck so far.
Please help.Thanks in advance.
Regards
Subrat

Subrat,
This may be related to spellchecking or may be synonym. Spellcheck is based on indexed terms.
The best test would be to run the queries from qrserver (13280) and then look at the spellcheck query transformations. If spellchecking is not doing it, then you must have a synonym setup .Check your keyword/synonyms from the SharePoint side.

Returning a result set/record from a dynamic query

There seems to be plenty of examples for using Native Dynamic Sql to formulate and execute a dynamic query, however there are no examples of returning a result set or records which contain the rows of data that are retrieved by executing the query. Could someone give us an example?

Welcome to the Oracle forum....
CREATE OR REPLACE PACKAGE curspkg_join AS
TYPE t_cursor IS REF CURSOR ;
Procedure open_join_cursor1 (n_EMPNO IN NUMBER, io_cursor IN OUT t_cursor);
END curspkg_join;
Create the following Oracle package body on the Oracle server:
CREATE OR REPLACE PACKAGE BODY curspkg_join AS
Procedure open_join_cursor1 (n_EMPNO IN NUMBER, io_cursor IN OUT t_cursor)
IS
v_cursor t_cursor;
BEGIN
IF n_EMPNO <> 0
THEN
OPEN v_cursor FOR
SELECT EMP.EMPNO, EMP.ENAME, DEPT.DEPTNO, DEPT.DNAME
FROM EMP, DEPT
WHERE EMP.DEPTNO = DEPT.DEPTNO
AND EMP.EMPNO = n_EMPNO;
ELSE
OPEN v_cursor FOR
SELECT EMP.EMPNO, EMP.ENAME, DEPT.DEPTNO, DEPT.DNAME
FROM EMP, DEPT
WHERE EMP.DEPTNO = DEPT.DEPTNO;
END IF;
io_cursor := v_cursor;
END open_join_cursor1;
END curspkg_join;
Dim Oraclecon As New OracleConnection("Password=pwd;" & _
"User ID=uid;Data Source=MyOracle;")
Oraclecon.Open()
Dim myCMD As New OracleCommand()
myCMD.Connection = Oraclecon
myCMD.CommandText = "curspkg_join.open_join_cursor1"
myCMD.CommandType = CommandType.StoredProcedure
myCMD.Parameters.Add(New OracleParameter("io_cursor", OracleType.Cursor)).Direction = ParameterDirection.Output
myCMD.Parameters.Add("n_Empno", OracleType.Number, 4).Value = 123
Dim myReader As OracleDataReader
Try
myCMD.ExecuteNonQuery()
Catch myex As Exception
MsgBox(myex.Message)
End Try
myReader = myCMD.Parameters("io_cursor").Value
Dim x, count As Integer
count = 0
Do While myReader.Read()
For x = 0 To myReader.FieldCount - 1
Console.Write(myReader(x) & " ")
Next
Console.WriteLine()
count += 1
Loop
MsgBox(count & " Rows Returned.")
myReader.Close()
Oraclecon.Close()
The above code is working in one of our application; which is using ref cursor as result set and get from procedure. I hope you can found more code by google and/or search in this forum as well; if above code is not useful to you.
HTH
Girish Sharma

Design a procedure which returns a result set of a select Query

Hi...
Can some one help me out with a brief design or work around for creating a stored procedure which runs a select Query and Returns a result set...
If not a stored procedure, at least a function which makes the job simple....
Awaiting help in this regard ........

Hi...
I am sorry for providing insufficient Info...
Actually I am using Oracle 10G DB...
I have a select Query..
Since I am a part of team which is building a Complete Data Driven site, Even an SQL Query and a PL/SQL function body was stored in the Table itself to bring in some kind of Dynamism in the site.... But the master table was loaded with a lot of data and hence Now we decided to Store everythin in a generic package..
I used REF CURSORS to store a result set of a simple SELECT Query.... and declaring it as an out parameter in my Procedure body so that the JAVA team can directly access the Procedure from the JAVA layer....
Now I want to know can I do anything more efficient to carry out the above operation....

How to handle large result sets?

Hi All,
I have a large result set to be displayed to user using jsp's. Problem is that result set is too big, so I can't display all the records in a single push. I want to show the results page by page say 25 per page. Now for every page I have to fetch data from database, means there are going to be many database calls which is not advisable. Or i can cache data in a CachedRowSet to reduce database calls, but in this case you have to store all the data in memory which is not a good solution in case you have very large data sets. Can anybody suggest me a solution to this problem?

The best thing for you to do is to implmeneting paging logic in conjunction with a scrollable resultset (JDBC 2.0+).
The logic would go like this assuming 30 rows per page:
- keep track of which page the user is on (e.g. page 3)
- issue the full sql
- scroll thru only the rows in the current page (e.g. rows 90-120)
- copy the page's rows to value objects
- close the resultset, statement, and connection
In the above example, you would scroll to row 90 using rs.absolute(90).
The efficiency comes from the fact that you're using a scrollable resultset. By using this, only the rows that you scroll thru are extracted out from the database. I performed some simple testing and with my data, and the scrollable resultset was about 10x in performance.
Good luck!

Callable Statatement returning multiple Result Sets

Hello all,
I've got a stored procedure that will be returning multiple result sets and i was wondering if someone could show me how to pull the multiple result sets out of the CallableStatement object. Any help would be greatly appreciated.

Here is a sample that does what you want. You will have to substitute the call to DBConn.getConnection() with your own DB connection. Also remove the import of com.ovotron.util.*.import com.ovotron.util.*;
import java.sql.*;
public class MultiSQL {
    private static Connection conn = null;
    public static void main(String[] args) {
        // Just gets a connection to the DB.
        conn = DBConn.getConnection();
        getResults(conn);
    * Cycles through multiple result sets returned from a stored procedure.
    * Only the first column is output.
    * <p>
    private static void getResults(Connection conn) {
        // Not sure which DBMS you are using. This is the syntax for
        // SQLServer V7.0.
        String            sql     = "{call getMultiResults}";
        CallableStatement stmt    = null;
        ResultSet         rs      = null;
        int               setNo   = 0;
        try {
            stmt = conn.prepareCall(sql);
            boolean found = stmt.execute();
            while (found) {
                setNo++;
                rs = stmt.getResultSet();
                while (rs.next()) {
                    System.out.println("Result set " + setNo +
                                       ": value: " + rs.getString(1));
                    System.out.flush();
                rs.close();
                found = stmt.getMoreResults();
        catch (SQLException e) {
            e.printStackTrace();
        finally {
            try {
                if (rs   != null) rs.close();
                if (stmt != null) stmt.close();
            catch (SQLException e) {
                // Tried already to clean up.
}The procedure I used is:CREATE PROCEDURE [getMultiResults] AS
select col1 from tab1;
select col2 from tab1;
select col3 from tab1;Of course you will need to create and populate tab1.

Send email when report data updated on report server

Hii all
please clear me what this triggers functions from me??
i want to send report email to boss when report data updates on server
i have used this but neither subscription shows last run time nor email get sent.
how can i do this??
Dilip Patil..

Hii all
please clear me what this triggers functions from me??
i want to send report email to boss when report data updates on server
i have used this but neither subscription shows last run time nor email get sent.
The so-called "trigger" is nothing than "when the snapshot has been updated". In other words: it's not the actual data that has changed but a new
snapshot has been created, which in turn has it's own schedule.
The wording "trigger" is a bad choice since when it has been introduced and has irritated many people since then.
For a custom solution check this thread:
Triggering Data Driven Subscriptions in SSRS
Andreas Wolter (Blog |
Twitter)
MCM - Microsoft Certified Master SQL Server 2008
MCSM - Microsoft Certified Solutions Master Data Platform, SQL Server 2012
www.andreas-wolter.com |
www.SarpedonQualityLab.com

How to save memory when processing large result set

I need to dump multi millions of rows of data into excel files
I query the tables and open excel to write in
The problem is even I chopped the result into hundred files, close excel completely after 65536 rows, the memory usage keeps going up as the result set is looped and at one point hit the heap size
How can I release the memory has been used in the result set?
Thank you

mycoffee wrote:
936517 wrote:
I think resultSet.close() will do what you want (you shouldn't have to set resultSet=null when you're done with it).
You can't force the garbage collector to run and reclaim memory. It uses an intelligent algorithm to do so .
I question why your project is sending millions of records to excel. Who is going to read a 10,000 page excel document(s)?
Instead, I suggest you provide a (intelligent) filter mechanism to allow users to get a subset of data to send to an excel document rather than all data. For example: instead of sending him the entire telephone book, have him search for results based on lastName and/or firstName. That will cut down on the number of records returned. Next, does the user really need all the columns of data in each record? That will cut it down further.
You can search Google for 'java heap size' to increase the memory for your program. However, your 65536 limit is probably due to Excel's limitation and not your Java program.Sorry I could not explain the need,
No. That is not issue here. I already use max heap size I can
but I can handle it now. Open files, write directly to the file instead of holding the data and dumping all at once. I save all the overhead and it works fine even the result set still consumes almost all the memory.is it possible you are using mysql? the mysql jdbc driver has a terrible default setup in that it keeps all results for the result set in memory ! i think some of the latest drivers finally allow you to stream results sensibly, but you have to use the correct options.

I-bot not emailing when report returns large result set..

Similar Messages

Maybe you are looking for