I can Ping FW inside interface but can not connect to remote resources
dear all
i configer my asa 5520 through ASDM to enable VPN Connection , i follow the cisco steps and it works fine and the anyconnect version 3.1 in Windows 8 - one day troubleshoot for this point only - can connect and have an IP address from the range , but i have something wrong in NAT may be because all guides talking about old ASDM ( NAT Exempt) but i am confeused to apply it on the new ASDM.
i can ping the inside interface from my labtop which using anyconnect , but i can not access anything else inside my network
Please anyone has a solution , please describe it using ASDM , thanks for help
This is my configuration
interface GigabitEthernet0/1
description
nameif SRV_ZONE
security-level 50
ip address 192.168.1.1 255.255.255.0
interface GigabitEthernet0/2
description
nameif TRUST_ZONE
security-level 100
ip address 172.17.200.1 255.255.255.0
interface GigabitEthernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif MGMT
security-level 0
ip address 10.10.10.1 255.255.255.0
dns server-group DefaultDNS
domain-name xxx.xxx.xxx
object network obj-192.168.1.11
host 192.168.1.11
object network obj-xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object service obj-tcp-source-eq-25
service tcp source eq smtp
object network obj-192.168.1.12
host 192.168.1.12
object network obj-xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object network obj-192.168.1.0
subnet 192.168.1.0 255.255.255.0
object service obj-tcp-eq-25
service tcp destination eq smtp
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network obj-0.0.0.0
host 0.0.0.0
object network obj_any-01
subnet 0.0.0.0 0.0.0.0
object network obj-172.17.8.8
host 172.17.8.8
object network obj-172.17.0.0
subnet 172.17.0.0 255.255.0.0
object network obj_any-02
subnet 0.0.0.0 0.0.0.0
object network obj_any-03
subnet 0.0.0.0 0.0.0.0
object network obj_any-04
subnet 0.0.0.0 0.0.0.0
object network obj_any-05
subnet 0.0.0.0 0.0.0.0
object network obj_any-06
subnet 0.0.0.0 0.0.0.0
object network obj.172.17.8.115
host 172.17.8.115
object network obj.xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object service http
service tcp source eq www destination eq www
object network obj.xxx.xxx.xxx.xxx
host xxx.xxx.xxx.xxx
object service https
service tcp source eq https destination eq https
object service newservice
service tcp source eq pop3 destination eq pop3
object network mail
host 172.17.8.8
description mail
object network 192.168.1.11
host 192.168.1.11
description smtp
object service smtpnew
service tcp source eq 587 destination eq 587
object network VPN_RANGE
description VPN ACCESS RANGE
object network VPN_PoOL
subnet 172.17.16.0 255.255.255.0
description vpn
object-group network DM_INLINE_NETWORK_1
network-object host 192.168.1.11
network-object host 192.168.1.12
object-group network Eighth_Floor
network-object 172.17.8.0 255.255.255.0
object-group service WEB_SERVICES
service-object tcp destination eq www
object-group network ENT_SERVERS
network-object host 192.168.1.11
network-object host 192.168.1.1
object-group network DM_INLINE_NETWORK_2
network-object 172.17.200.0 255.255.255.0
network-object 172.17.8.0 255.255.255.0
object-group service DM_INLINE_TCP_2 tcp
port-object eq www
port-object eq https
port-object eq smtp
object-group service web tcp
port-object eq www
port-object eq xxx
port-object eq ftp
port-object eq xxx
port-object eq xxx
object-group service xxx_Web_and_Email
service-object object http
service-object tcp destination eq pop3
service-object tcp destination eq smtp
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_1
protocol-object udp
protocol-object tcp
object-group protocol DM_INLINE_PROTOCOL_2
protocol-object ip
object-group protocol DM_INLINE_PROTOCOL_3
protocol-object ip
access-list DMZ_access_in extended permit ip 192.168.1.0 255.255.255.0 172.17.0.0 255.255.0.0
access-list DMZ_access_in extended permit ip 192.168.1.0 255.255.255.0 any
access-list justice_splitTunnelAcl standard permit 10.100.100.0 255.255.255.0
access-list xxx-VPN_splitTunnelAcl remark vpn
access-list xxx-VPN_splitTunnelAcl standard permit 172.17.16.0 255.255.255.0
access-list xxx-VPN_splitTunnelAcl standard permit any
access-list cap extended permit tcp any host xxx.xxx.xxx.xxx eq smtp log
access-list cap1 extended permit tcp host 192.168.1.11 any eq smtp
access-list SRV_ZONE_nat_outbound extended permit tcp 192.168.1.0 255.255.255.0 any eq smtp
access-list SRV_ZONE_nat_outbound extended permit ip host 192.168.1.11 any
access-list TRUST_ZONE_access_in extended permit ip host 172.17.88.108 any
access-list TRUST_ZONE_access_in extended permit object-group DM_INLINE_PROTOCOL_2 10.10.3.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit object-group DM_INLINE_PROTOCOL_3 10.10.50.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit ip 172.17.8.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit ip 172.17.200.0 255.255.255.0 any
access-list TRUST_ZONE_access_in extended permit ip 172.17.0.0 255.255.0.0 host 192.168.1.12
access-list TRUST_ZONE_cryptomap extended permit ip xxx.xxx.xxx.xxx 255.255.255.248 any
access-list outside_access_in extended permit tcp any host 192.168.1.11 eq smtp
access-list outside_access_in extended permit tcp any host 172.17.8.8 eq www
access-list outside_access_in extended permit tcp any host 192.168.1.12 object-group web
access-list outside_access_in extended permit tcp any host 172.17.8.8 eq pop3
access-list outside_access_in extended permit ip 172.17.16.0 255.255.255.0 any inactive
access-list vpn remark vpn
access-list vpn standard permit 172.17.16.0 255.255.255.0
pager lines 24
logging enable
logging trap informational
logging asdm informational
logging host TRUST_ZONE 172.17.8.100
mtu INT_ZONE 1500
mtu SRV_ZONE 1500
mtu TRUST_ZONE 1500
mtu MGMT 1500
ip local pool VPN_POOL 172.17.16.100-172.17.16.254 mask 255.255.255.0
ip verify reverse-path interface INT_ZONE
ip verify reverse-path interface SRV_ZONE
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any SRV_ZONE
icmp permit any TRUST_ZONE
asdm image disk0:/asdm-635.bin
no asdm history enable
arp timeout 14400
nat (SRV_ZONE,INT_ZONE) source static obj-192.168.1.11 obj-xxx.xxx.xxx.xxx service any obj-tcp-source-eq-25
nat (SRV_ZONE,INT_ZONE) source static obj-192.168.1.12 obj-xxx.xxx.xxx.xxx
nat (SRV_ZONE,INT_ZONE) source dynamic obj-192.168.1.0 interface service obj-tcp-eq-25 obj-tcp-eq-25
nat (INT_ZONE,SRV_ZONE) source static any any destination static 192.168.1.11 obj-172.17.8.8 service obj-tcp-source-eq-25 obj-tcp-source-eq-25
nat (TRUST_ZONE,INT_ZONE) source static VPN_PoOL VPN_PoOL destination static VPN_PoOL VPN_PoOL
object network obj_any
nat (SRV_ZONE,INT_ZONE) dynamic obj-0.0.0.0
object network obj_any-01
nat (SRV_ZONE,MGMT) dynamic obj-0.0.0.0
object network obj-172.17.8.8
nat (TRUST_ZONE,INT_ZONE) static xxx.xxx.xxx.xxx service tcp www www
object network obj-172.17.0.0
nat (TRUST_ZONE,SRV_ZONE) static 172.17.0.0
object network obj_any-02
nat (TRUST_ZONE,INT_ZONE) dynamic interface
object network obj_any-03
nat (TRUST_ZONE,SRV_ZONE) dynamic interface
object network obj_any-04
nat (TRUST_ZONE,INT_ZONE) dynamic obj-0.0.0.0
object network obj_any-05
nat (TRUST_ZONE,SRV_ZONE) dynamic obj-0.0.0.0
object network obj_any-06
nat (TRUST_ZONE,MGMT) dynamic obj-0.0.0.0
object network obj.172.17.8.115
nat (TRUST_ZONE,INT_ZONE) static obj.xxx.xxx.xxx.xxx service tcp www www
object network mail
nat (TRUST_ZONE,INT_ZONE) static obj-xxx.xxx.xxx.xxx service tcp pop3 pop3
nat (TRUST_ZONE,INT_ZONE) after-auto source static obj-172.17.8.8 obj-xxx.xxx.xxx.xxx service https https
access-group outside_access_in in interface INT_ZONE
access-group DMZ_access_in in interface SRV_ZONE
access-group TRUST_ZONE_access_in in interface TRUST_ZONE
route INT_ZONE 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx 1
route TRUST_ZONE 10.10.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 10.11.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 10.12.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 10.13.0.0 255.255.0.0 172.17.200.254 1
route TRUST_ZONE 172.17.0.0 255.255.0.0 172.17.200.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication enable console LOCAL
aaa authentication http console LOCAL
aaa authentication ssh console LOCAL
aaa authentication serial console LOCAL
http server enable
http 172.17.8.0 255.255.255.0 TRUST_ZONE
http 172.17.8.155 255.255.255.255 TRUST_ZONE
http 172.17.8.45 255.255.255.255 TRUST_ZONE
http 10.10.10.2 255.255.255.255 MGMT
http 192.168.1.12 255.255.255.255 SRV_ZONE
http 0.0.0.0 0.0.0.0 INT_ZONE
http 172.17.200.0 255.255.255.0 TRUST_ZONE
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto dynamic-map pol 1 match address TRUST_ZONE_cryptomap
crypto dynamic-map pol 1 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map INT_ZONE_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map TRUST_ZONE_map0 1 ipsec-isakmp dynamic pol
crypto map TRUST_ZONE_map0 interface TRUST_ZONE
crypto map INT_ZONE_map0 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map INT_ZONE_map0 interface INT_ZONE
crypto ca trustpoint ASDM_TrustPoint0
enrollment self
fqdn SEC-xxx-FW1
subject-name CN=SEC-xxx-FW1
no client-types
proxy-ldc-issuer
crl configure
crypto ca trustpoint ASDM_TrustPoint1
enrollment self
subject-name CN=SEC-xxx-FW1
keypair sslvpnkeypair
crl configure
crypto ca certificate chain ASDM_TrustPoint0
certificate 31
57f4e52e 6b851966 77515d62 c209a0df 1c32ce94 bb90cbce 497cfd04 6745ea85
efb75f85 2ae1ad35 344d94ab 915e01ab d3292626 ac697a52 b4ed6632 d3ed2332 ae
quit
crypto ca certificate chain ASDM_TrustPoint1
certificate e6054352
c64f3661 30f14c3d 06b5f039 9f14560d 3b154fd1 42782268 7531689e 8e547d91
85e88415 e326f653 74733a6c a3f5c935 f7e83f56 f6
quit
crypto isakmp enable INT_ZONE
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 INT_ZONE
ssh 172.17.8.0 255.255.255.0 TRUST_ZONE
ssh 10.10.10.2 255.255.255.255 MGMT
ssh timeout 5
console timeout 0
management-access TRUST_ZONE
vpn load-balancing
interface lbpublic INT_ZONE
interface lbprivate INT_ZONE
priority-queue INT_ZONE
tx-ring-limit 256
threat-detection basic-threat
threat-detection scanning-threat
threat-detection statistics host number-of-rate 3
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ssl trust-point ASDM_TrustPoint1 INT_ZONE
webvpn
enable INT_ZONE
svc image disk0:/anyconnect-win-2.1.0148-k9.pkg 1
svc enable
tunnel-group-list enable
group-policy xxx-VPN internal
group-policy xxx-VPN attributes
dns-server value xx.xx.xx.xx xx.xx.xx.xx
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value xxx-VPN_splitTunnelAcl
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol webvpn
group-policy GPNEW internal
group-policy GPNEW attributes
dns-server value 172.17.8.41
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
default-domain value xxx.xxx.xxx
address-pools value VPN_POOL
username VPNAM password xxx encrypted
username VPNAM attributes
service-type remote-access
vpn-group-policy xxx-VPN
tunnel-group xxx-VPN type remote-access
tunnel-group xxx-VPN general-attributes
dhcp-server 172.17.8.41
tunnel-group xxx-VPN ipsec-attributes
pre-shared-key *****
tunnel-group pol type ipsec-l2l
tunnel-group pol ipsec-attributes
pre-shared-key *****
trust-point ASDM_TrustPoint0
tunnel-group SSLClientProfile type remote-access
tunnel-group SSLClientProfile general-attributes
address-pool VPN_POOL
default-group-policy GPNEW
tunnel-group SSLClientProfile webvpn-attributes
group-alias SSLVPNClient enable
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect ip-options
inspect pptp
service-policy global_policy global
prompt hostname context
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:78a941e3f509dec8f3570c60061eedaa
: end
thanks god
i solve the problem
the problem is in NAT
i creat an object with the ip address host from VPN pool and name it vpn
then i do the nat from inside to that host as the following picture...
trust zone is the inside zone
vpn is the outside vpn host...
thanks and hope it helps anyone else...
Similar Messages
-
WRT54G Can ping to outside world but can't browse internet.
I have a WRT54G wireless router. The wireless is working fine as I can communicate with the router admin area via a web browser. I can also send and receive packets by pinging a site - like www.google.com. The router is connected to a cable modem. If I plug my laptop directly to this modem (by-passing the router) I can browse the web no problem.
I have a network cable connecting the modem and router. If I unplug this cable the 'internet' light on the router goes out (indicating that it can sense the modem), when I plug it back in it goes on again. So everything seems fine. Only I can't browse the web or send and receive email through the router.
I have tried resetting the router to the defaults - all to no avail. It was working fine, then last weekend - without touching any settings, something changed and we were unable to browse as usual???
Any ideas? Thanks, MichaelIf you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you have neither, check what firewall or Internet security you have on your PC, Disable it and try accessing the Internet.Also adjust your IE browser settings.
Open an Internet Explorer browser page >>> Tools >>> Internet Options- On "General" Click on "Use Blank" button. Click on "Delete Cookies" and click on ok of the confirmation box. Click on "Delete Files" and check the option "Delete All Offline Contents" and click Ok- Click on "Clear History" as well. Then go to "Connections" Select "Never Dial a Connection". Click on the "LAN Settings button". Uncheck all the boxes
here and click Ok- Go to "Advanced". Click on the restore defaults button below and then click on Apply and then Ok.Close the IE and Reopen it again, Check if you have internet. -
I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.
Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.
-
My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly. -
Hi, I have a problem with getting my apple Id working for me. It's been 2 months since it happened and Apple failed to act. I can tell my story proerly, but am not sure, you guys can help, so I just copy my message to them today, I am trying to get it across all the places around to pay their attention. This is a desperate move, so if you are not the right people to help me to get my message accross, may be you can advise where can I go.
Thank you, and sorry for the language.
Vitas Dijokas
I am sorry to say that, but your security makes my life miserable – it’s been 2 months since my Apple ID account got stuck, and since then I cannot update 37 applications (to date), i.e. most of my applications. Half of them I bought. I also paid for iCloud, and it is not working. I paid money and I am stuck with old applications and no iCloud. Your security *****. Your service ***** too. It took your service 1 month to finally understand why this happened to me, and it took me tens of emails to you and 3 hours of telephone conversation to find out the reason for my problem. And the problem is still not fixed. NOT FIXED. You just leave your customer – the one who paid you money and spent so much time with you trying to help you help me – and nothing. You tell me: “Vitas, Stick your stinky iphone in your *** and enjoy life, we do not care!” *************.
It is ******* outrageous, and you should know that, guys. Get into the ******* database and correct the bug. Get someone in the partners-telephone carriers company (it is Orange as carreer and Cellcom as seller of the phone) authorized to Identify me in personal encounter in one of the branches in Israel (where I live) and make sure it is really me, and get the ******* system accept my password and let me use my phone.
Otherwise **** off. None of my friends will get my advise to buy an iphone or any of apple products. And I think you should be very attentive to cases like this, guys. Do your work for the money we pay, or disappear. There are many others eager to take your place, and if the problem is not fixed I will eventually go to the others. My patience is lost, and as soon as I can afford another phone I will change it. AND I WILL TRY TO GIVE BAAAAAD PUBLICITY TO APPLE – I am threatening here, so ACT NOW.
Vitas DijokasWell, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you -
Everytime I open up Itunes I can listen to my music, but once I connect it to my IPod, it says "ITunes has stopped working" and then ITunes ***** down. How do I fix this problem?
Hi The Funkster,
The resource below will provide some initial troubleshooting for the issue you are having uploading songs and artwork to iTunes Match.
How to troubleshoot iTunes Match - Apple Support
http://support.apple.com/en-us/TS4054
I hope this information helps ....
- Judy -
I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)
Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
TS3274 How can I connect tv to ipad? Want it to use netflex but will not connect using USB cable.
How can I connect tv to ipad? Want it to use netflex but will not connect using USB cable.
http://store.apple.com/us/browse/home/shop_ipad/ipad_accessories/cables_docks
You should find a solution here -
Dear Apple,
Please help me to find my iPad Air 2 64 GB and iPhone 5C 8GB. They're in IOS 8.0 maybe...I lost all of them last night. I set up icloud for my devices but i can't find them because they were not connect to the Internet. Please guide me other ways to find my "best friends". They're very important to me. Many important files for my job in here and it has sentimental value to me. My boyfriend gave it for me so i don't want to lose them. And because i just lost my iPad Air last 3 month, and now i just bought iPad Air 2 two months ago. I'm so sad and lost. I want to catch the thief to the police so bad because they keep my bag and many other important things. I can not do anything without them. Please help me and contact me via my email or my phone. Thank you very much. Hope to receive your answer soon.Hey there thaovy309,
Welcome to Apple Support Communities.
The linked article below provides a lot of great information and suggestions that should address your concerns about your data and finding your lost or stolen iPhone 5c and iPad Air 2.
If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support
Take care,
-Jason -
My ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wifi.
- Reset the iPod. nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
ll of a sudden, i can no longer see pictures in adds ?? If I go to Kijiji and look at any ad I can no longer see the pic in the add. Did accidently click or disable something?? update: I can see them in EI but can't anymore in Firerfox?? What did I click??
I did a restore ,but no fix.See http://kb.mozillazine.org/Images_or_animations_do_not_load
It is possible that you clicked "Block Images" in the right click context menu while trying to save an image.
Check the image exceptions: Tools > Options > Content: Load Images: Exceptions
See [[Options window - Content panel]]
*A way to see which images are blocked is to click the favicon (<i>Site Identification</i> icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Open the <i>Media</i> tab of the "Page Info" window.
*Select the first image and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain. -
How can you change your line access selection? I have found where you can change your plan selection, but can you change the line access fee or is that a set amount?
DIVAB71,
Great question. The line access fees for the account are a set amount and can not be changed unless you are going from a basic to a smartphone or vice versa. If you are wondering about adding the month to month discount if you are out of contract Ann154 has provided great information on how to access and add the feature.
LindseyT_VZW
Follow us on Twitter @VZWSupport -
I have a lenovo S410 Touch laptop -with windows 8.1 -Itunes 11.1.1 ,i am trying to connect my iphone 4s by USB cable but does not connect , it shows that it wants to connect , how can you connect this?
http://support.apple.com/kb/ts1538
-
I have photoshop Elements 12 a and I can pull up the photo but can't edit it. Crop it. Add text. Does anyone know how to fix this?
Apparently it's related to the Firefox plug in.
This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
2. Select to "Options
3. Select "Applications"
4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
5. Open a test PDF. It should open in it's own window now.
Again, not a complete solution but something that'll at least let you scroll with PDFs open.
More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033 -
I can't text a contact but can voice phone them. I don't have the problem with any other contact and the contact is not blocked. I have an iphone5.0 OS 8.1.3. I used to be able to text them with no problem. The only difference I can think is that this problem may have started since I downloaded the OS I am using now
cyclelukeWasn't responding to you. Please show me links where this helped.
Apple isn't showing any system problems: https://www.apple.com/support/systemstatus/
Maybe you are looking for
-
Airport Extreme base station not recognized anymore by Airport Utility software
Hello, I just encountered the problem today. I have old Airport Extreme base sation (mushroom design).Picture below. I have iMac 24". About this Mac Picture below. Obviously, Airport Utility has been updated recently and today my network is not valid
-
To upgrade or Not to upgrade this is the Question? What is the Answer!
Does Adobe expect Design & Prepress studios like the one I run to upgrade all out copies to get the latest version of Acrobat 9 before they have fixed the problems that are in Acrobat 8? I see that the latest version is released now but there is stil
-
Finding a job that compresses a cube each day
Hello All, A cube gets compressed each day - all packets. I am trying to find the job that runs daily that does this so I can change it. Please advise on where I should go to find the job, and how do I tell if I have found the right job? Many thanks
-
Hi, Can someone please provide steps on how to configure OJMS on App Server 10.1.2. How to create Resource Adapter, Queue etc and AQ as the Database Persistence. Where can I find the How to Examples of MDB & OJMS for App. Server 10.1.2. as on the sit
-
Sorry, stupid question. I need to start a dial-up connection for telnet from my java application and i haven't a clue where to start. i use telnet extensively, but have never had to start a dial-up. can someone point me in the right direction.