I can't add my wifi printer epson stylus nx430

i cant add my wi-fi printer epso NX430 ,yesterday download the latest driver , this problem start when update my mac to osx 10.8.5

Is your printer connecting to your wifi ?
You may have your SSID in router settings not showing ,whilst you are trying to connect.
http://support.apple.com/kb/TS3147
http://support.apple.com/kb/HT1338
Additional Information
Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB. For more details, see this article.
For information about adding a printer and other topics, see these articles:
Mac Basics: Printing in OS X Mountain Lion & OS X Lion
Mac 101: Printing (Mac OS X v10.6)

Similar Messages

Can I add a WiFi printer through WPS with the new AirPort Extreme and AirPort Utility 6.3?

It says here that AirPort Utility 6.2 supports WPS-capable WiFi printers, but on the new AirPort Extreme techs pecs Apple insists that the way printing is shared is by connecting the printer to the AirPort Extreme with a USB cable, which really defeats the whole purpose of WiFi printing doesn't it?
Does the new Airport Extreme support WPS-capable printing? Does AirPort Utility 6.3 support it?

Does the new Airport Extreme support WPS-capable printing?
Yes
Does AirPort Utility 6.3 support it?
Yes

Can't connect to wifi printer.

Since upgrading to BT Infinity I haven't been able to connect to my wifi printer (Epson Stylus SX535WD). The new home hub is up and running but I can't see how to connect to the printer. When I go to the printer's set-up mode and select 'Wifi Auto-Connect', I get the error message: 'No computer found. Check wifi/network device and condition. Try again.'
I tried deselecting the printer from the Mac's printer list, with the idea of adding it again, but now no printers appear at all when I press the + button. So first I need to add the printer once again and then find how to connect to it. I'm using OS X (10.8.5). Any ideas anyone?

Follow Apples instructions for installing a WI-FI printer in OS X Mountain Lion: Set up a printer to print wirelessly. If you have to first use the Reset Printing System feature.

Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW Why not?r

Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW
Why not?

Trying to print e-mails using iCloud but can not add my printer Epson Stylus Photo PX810FW
Why not?

HT4356 My printer, Epson Stylus Office TX600FW, is not listed on the AirPrint. How to add it? Would Apple expand the list?

My printer, Epson Stylus Office TX600FW, is not listed on the AirPrint. I can't find it on my iPad or iPhone. How to add it? Would Apple expand the list?

Only the printer manufacturer can make it compatible with AirPrint, it's not up to Apple. You could try Epson's iPrint app, that claims to support that model :
http://itunes.apple.com/us/app/epson-iprint/id326876192?mt=8

When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it.

When I try and print an "Approach Plate, or Departure" from ForeFlight to my Epson Stylus NX430 using AirPrint the image is resized. How can I print without it resizing. I want to have the plate print in the original size so I can use it. Is this an Apple, Epson, or Foreflight Issue? I just purchased the printer so I can return it and get a different model or brand. I spoke to Epson and the suggestions given did not resolve the issue. I have cut the paper down to the size of the plate roughly 5.5x8 and it still try's to print at 8.5x11. I have also requested help through ForeFlights Tech help but have yet to receive an answer.
Please help!

It varies based on what you ordered and whether it is in stock or has to be assenbled and shipped from China. Your email conformation should give an estimate of when the items are expected to be shipped or available for pick up if you are having it sent to a local Apple Store.

When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

Hi,
I would suggest you to uninstall Adobe Reader using the cleaner tool and then re-install the latest version.
Adobe Cleaner Tool:- Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs.
Latest version of Adobe Reader:- http://get.adobe.com/reader/
If you still experience the same issue, please share the following information:-
- Screenshot of Adobe Reader showing printer options
- Screenshot of Microsoft Word showing printer options
- Screenshot of control panel- Control Panel\All Control Panel Items\Devices and Printers
Regards,
Nakul

Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy

Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help . regards Cindy

Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Some basic printer troubleshooting steps before worrying about a printer driver:
1. Have you tried turning the printer off and back on?
2A. Is the printer attached with a cable?
     If yes, have you tried unplugging and re-plugging both ends of the printer cable?
     If that does not help, can you test the printer with another cable?
2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
     Have you tried restarting your wireless router?
3. Have you tried restarting your MacBook? (Be sure to save your work first.)
4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
5. Have you updated OS X or the program you're trying to print from recently?

How can i add a wireless printer HP officejet 6310 all in one? is it possible

How can i add a wireless printer HP officejet 6310 all in one? is it possible..?

Hi @millep
To answer your question, no the Officejet 2620 is not a wireless printer;
- Source: Printer specifications
As for the USB cable, personally, I believe the intention is to bring down the cost of the printer by selling the USB cable separately. Many people already have printer USB cables kicking around the house, so instead of paying more for the printer and having an extra cable I believe the theory is reduce the cost and sell the USB separately for those who need to purchase one.
I hope this answers your inquiry.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How can I add header on printing with Numbers

How can I add header on printing with Numbers? The previous version use to have it and I cannot find it in the new one ...

Hi Tanya,
Glad to hear that you found how to edit page headers and footers in Numbers 3.2. I agree that Help in Numbers 3 is woeful. No searchable PDF to download and use offline. All is online (one page at a time) and we need to know the terms we are looking for before we look.
The first HelpDesk:
http://www.youtube.com/watch?v=pQHX-SjgQvQ
For printing to paper where layout is important, I use Numbers '09 (Numbers 2.3) with its Print View. But it is orphanware. As the name suggests, there has not been a major overhaul since 2009. With that in mind, it is a useful version to hang onto while we hope and wait (and provide feedback to Apple) for something in future versions of Numbers 3.x to provide better layout capability.
Indeed, each new update of Numbers 3.x has restored more of the old features while adding new features that are enhancements over Numbers '09. Many of the Numbers 3 enhancements reflect long-awaited wishes through this forum, and were passed on by Numbers Feedback to Apple. So it seems that Apple does take heed of feedback.
In the meantime, I enjoy the charm of Numbers '09 whilst exploring the new features of Numbers 3.
What has been GAINED in Numbers 3 is here:
https://discussions.apple.com/thread/5473882?start=75&tstart=0
(Very long thread because it started with Numbers 3.0, and enhancements have continued through Numbers 3.2).
Hints on workarounds in Numbers 3 is here:
https://discussions.apple.com/message/23622372#23622372
Some workarounds are no longer needed, but what amazes me is how many Numbers '09 features (the so-called "lost" features) were not lost; the settings have simply been moved. Moreover, many features such as margin settings carry over with a Numbers '09 document or template into Numbers 3.
Hints for layout on screen before printing to paper:
Try Alignment Guides and Rulers as suggested here:
Print View workarounds
Use a layout guide:
Layout Guide for Numbers
Regards,
Ian.

My ipad can not see my wifi printer

my ipad can not see my wifi printer ????????

Is it an AirPrint enabled printer ? The supported models are listed on this page, and there is also a bit of troubleshooting at the bottom : http://support.apple.com/kb/HT4356
If it's not an AirPrint model, then some manufacturers have their own apps in the iTunes app store, and there are also third-party apps such as Print Central For iPad and Print n Share which might work with it.

I can't find a wifi printer on my imac

Hello,
I can't find a wifi printer on my imac. It's always linked automatically to wifi printers before. It's an HP deskjet, I've tried downloading drivers for it, but still no joy. Any ideas what I should do? Thanks,

In future posts, please tell us more of the details - which printer, which Mac, which OS X version, etc. Have you changed anything lately?
First thing I would try is Reset Printing System (and after, try adding the printer again):
Mac OS X: How to reset the printing system - Apple Support
Read here about which printers are supported, and how we Normally get drivers now (Not by downloading directly from Manufacturer):
OS X: Printer and scanner software available for download - Apple Support

Can iPad 2 3G wifi print to canon pixma ip 100

Can iPad 2 3G wifi print to canon pixma ip 100

Khaled-
The iPad only prints by WiFi, so your 3G is not involved. There must be a WiFi path between the iPad and the printer.
I do not believe your Canon printer is compatible with AirPrint, so you will need an alternative way to print. Look in the iTunes store for Canon Apps that can print to your printer. There are other Apps such as Print n Share that should work for you.
Another way is to share your computer's printer as AirPrint over WiFi. Printopia is a Macintosh program that can do this. For a free alternative, search the web for AirPrint Activator. Versions are available for both Mac and Windows.
Fred

Epson Stylus NX430 will no longer print!

I recently changed internet providers and purchased a new Netgear router. Up until then, I have had no problem printing from my Macbook Air to my Epson Stylus NX430, but now when I try to print I get an Error message! I have emailed back and forth with Espon and we confirmed that the connection is fine. The drivers are up to date. We uninstalled and reinstalled the printer numerous times. We are able to print a test page using the Espon Utility. However, when I go to print from Word or Text/Email it does not work. I get an error message. Oddly enough it will print a document every so often, but not always. Epson has said that it is most likely a setting on my computer. Can someone help? Thank you!!

E [21/Feb/2013:18:32:23 -0600] [Job 446] Job stopped due to filter errors; please consult the error_log file for details.
D [21/Feb/2013:18:32:23 -0600] [Job 446] The following messages were recorded from 18:32:04 to 18:32:23
D [21/Feb/2013:18:32:23 -0600] [Job 446] Adding start banner page "none".
D [21/Feb/2013:18:32:23 -0600] [Job 446] Queued on "Epson_Stylus_NX430" by "lindsey".
D [21/Feb/2013:18:32:23 -0600] [Job 446] File of type application/pdf queued by "lindsey".
D [21/Feb/2013:18:32:23 -0600] [Job 446] Setting job-hold-until to no-hold
D [21/Feb/2013:18:32:23 -0600] [Job 446] Adding end banner page "none".
D [21/Feb/2013:18:32:23 -0600] [Job 446] Job released by user.
D [21/Feb/2013:18:32:23 -0600] [Job 446] job-sheets=none,none
D [21/Feb/2013:18:32:23 -0600] [Job 446] argv[0]="Epson_Stylus_NX430"
D [21/Feb/2013:18:32:23 -0600] [Job 446] argv[1]="446"
D [21/Feb/2013:18:32:23 -0600] [Job 446] argv[2]="lindsey"
D [21/Feb/2013:18:32:23 -0600] [Job 446] argv[3]="Gmail - Re: Library Question!"
D [21/Feb/2013:18:32:23 -0600] [Job 446] argv[4]="1"
D [21/Feb/2013:18:32:23 -0600] [Job 446] argv[5]="AP_ColorMatchingMode=AP_VendorColorMatching AP_D_InputSlot= APCustomColorMatchingProfile=sRGB ApplicationBundleName=Safari nocollate ColorModel=RGB com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMApplicationName=Safari com.apple.print.JobInfo.PMJobName=Gmail\ -\ Re:\ Library\ Question! com.apple.print.JobInfo.PMJobOwner=~Lindsey\ Rae~ com.apple.print.PageToPaperMappingMediaName=Letter com.apple.print.PageToPaperMappingType..n.=1 com.apple.print.PrinterInfo.PMColorDeviceID..n.=14757 com.apple.print.PrintSettings.PMColorSpaceModel..n.=2 com.apple.print.PrintSettings.PMColorSyncProfileID..n.=285 com.apple.print.PrintSettings.PMCopies..n.=1 com.apple.print.PrintSettings.PMCopyCollate..b. com.apple.print.PrintSettings.PMDestinationType..n.=1 com.apple.print.PrintSettings.PMFirstPage..n.=1 com.apple.print.PrintSettings.PMLastPage..n.=2147483647 com.apple.print.PrintSettings.PMPageRange..a.0..n.=1 com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647 cupsBorderlessScalingFactor=1.00 DestinationPrinterID=Epson_Stylus_NX430 EPIJ_ACam=0 EPIJ_AFil=0 EPIJ_AGai=1 EPIJ_APFPrvID=7 EPIJ_APri=2 EPIJ_ATon=7 EPIJ_Bdls=0 EPIJ_BkPr=0 EPIJ_Brit=0 EPIJ_BSSv=0 EPIJ_CCor=3 EPIJ_CMat=0 EPIJ_Cont=0 EPIJ_Cyan=0 EPIJ_DCCT=0 EPIJ_DoneOpnr=0 EPIJ_ECAv=0 EPIJ_ENAL=1-1_2-1_3-1_4-1 EPIJ_ERGB=0 EPIJ_exmg=2 EPIJ_Gamm=0 EPIJ_HdofClSp=0 EPIJ_Hori=0 EPIJ_IconQual=6 EPIJ_Ink_=1 EPIJ_Mage=0 EPIJ_Manu=0 EPIJ_Medi=0 EPIJ_Mode=3 EPIJ_OPT_Bi_D=1 EPIJ_OSCMProf=1 EPIJ_OSColMat=1 EPIJ_PageRegion=Letter EPIJ_PageSize=Letter EPIJ_PrStgAlK=0 EPIJ_PSrc=2 EPIJ_Qual=43 EPIJ_REye=0 EPIJ_Satu=0 EPIJ_Silt=0 EPIJ_Size=4 EPIJ_UEpL=0 EPIJ_Yell=0 EPIJClientInfo=1 EPIJProfileSpec=1 EPIJSharedClient=0 EPIJSystemLanguage=en EPSON.PrintModule.Setting.ApplicationPageRect..a.0=0.00000000000000 EPSON.PrintModule.Setting.ApplicationPageRect..a.1=0.00000000000000 EPSON.PrintModule.Setting.ApplicationPageRect..a.2=775.19995117187500 EPSON.PrintModule.Setting.ApplicationPageRect..a.3=595.19997596740723 EPSON.PrintModule.Setting.ApplicationPaperRect..a.0=-8.40002441406250 EPSON.PrintModule.Setting.ApplicationPaperRect..a.1=-8.39999961853027 EPSON.PrintModule.Setting.ApplicationPaperRect..a.2=783.59997558593750 EPSON.PrintModule.Setting.ApplicationPaperRect..a.3=603.60000038146973 EPSON.PrintModule.Setting.Encoding..n.=0 EPSON.PrintModule.Setting.PrinterName=EPSON\ Epson\ Stylus\ NX430(2,0) EPSON.PrintModule.Setting.SystType..n.=3072 media=Letter MediaType=0 PaperInfoIsSuggested..b. PDEChangeControl= PDEiPhotoPreset..n.=0 PDEOpenHelpCount..n.=0 PDEOpenHideOption..n.=0 PDEOpenPane..n.=0 printer-resolution=360x360dpi pserrorhandler-requested=standard Resolution=360x360dpi job-uuid=urn:uuid:d1a6cae9-8a69-3c11-5569-6e3fe0c99e1b job-originating-host-name=localhost time-at-creation=1361493124 time-at-processing=1361493124 job-impressions=1 com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1 sides=one-sided Duplex=None com.apple.print.PrintSettings.PMTotalBeginPages..n.=1 PageSize=Letter"
D [21/Feb/2013:18:32:23 -0600] [Job 446] argv[6]="/private/var/spool/cups/d00446-001"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[0]="<CFProcessPath>"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[8]="CUPS_STATEDIR=/private/etc/cups"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[9]="HOME=/private/var/spool/cups/tmp"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[11]="[email protected]"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[12]="SOFTWARE=CUPS/1.5.4"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[14]="USER=root"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[15]="CUPS_MAX_MESSAGE=2047"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[16]="CUPS_SERVER=/private/var/run/cupsd"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[17]="CUPS_ENCRYPTION=IfRequested"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[18]="IPP_PORT=631"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[19]="CHARSET=utf-8"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[20]="LANG=en_US.UTF-8"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[21]="APPLE_LANGUAGE=en-US"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[22]="PPD=/private/etc/cups/ppd/Epson_Stylus_NX430.ppd"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[23]="RIP_MAX_CACHE=128m"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[24]="CONTENT_TYPE=application/pdf"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[25]="DEVICE_URI=dnssd://Epson%20Stylus%20NX430._pdl-datastream._tcp.local. /?bidi"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[26]="PRINTER_INFO=Epson Stylus NX430"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[27]="PRINTER_LOCATION="
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[28]="PRINTER=Epson_Stylus_NX430"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[29]="PRINTER_STATE_REASONS=com.epson.status-reply.20130218-152656.00.d1.40 424443205354320d0a3700010104060201ff0f0d0301001a05032104026403013a100301094e1301 01190c0000000000756e6b6e6f776e24020000370502000000000000000000000000000000000000 00000000000000000000000000000000000000000000000,com.epson.status-reply.20130218- 152656.01.d1.0000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000,com.epson.status- reply.20130218-152656.02.5f.0000000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000000"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[30]="CUPS_FILETYPE=document"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[31]="FINAL_CONTENT_TYPE=printer/Epson_Stylus_NX430"
D [21/Feb/2013:18:32:23 -0600] [Job 446] envp[32]="AUTH_I****"
D [21/Feb/2013:18:32:23 -0600] [Job 446] Started filter /Library/Printers/EPSON/InkjetPrinter2/Filter/pdftopdf2.app/Contents/MacOS/pdft opdf2 (PID 830)
D [21/Feb/2013:18:32:23 -0600] [Job 446] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 831)
D [21/Feb/2013:18:32:23 -0600] [Job 446] Started filter /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII (PID 832)
D [21/Feb/2013:18:32:23 -0600] [Job 446] Started backend /usr/libexec/cups/backend/dnssd (PID 833)
D [21/Feb/2013:18:32:23 -0600] [Job 446] Resolving "Epson Stylus NX430._pdl-datastream._tcp.local."...
D [21/Feb/2013:18:32:23 -0600] [Job 446] STATE: +connecting-to-device
D [21/Feb/2013:18:32:23 -0600] [Job 446] Resolving "Epson Stylus NX430", regtype="_pdl-datastream._tcp", domain="local."...
D [21/Feb/2013:18:32:23 -0600] [Job 446] Looking for printer.
D [21/Feb/2013:18:32:23 -0600] [Job 446] Set job-printer-state-message to "Looking for printer.", current level=INFO
D [21/Feb/2013:18:32:23 -0600] [Job 446] Resolved as "socket://EPSON150AA8.local.:9100/"...
D [21/Feb/2013:18:32:23 -0600] [Job 446] STATE: -connecting-to-device,offline-report
D [21/Feb/2013:18:32:23 -0600] [Job 446] Executing backend "/usr/libexec/cups/backend/socket"...
D [21/Feb/2013:18:32:23 -0600] [Job 446] STATE: +connecting-to-device
D [21/Feb/2013:18:32:23 -0600] [Job 446] Looking up "EPSON150AA8.local."...
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster - copying to temp print file "/private/var/spool/cups/tmp/0033f51343e87"
D [21/Feb/2013:18:32:23 -0600] [Job 446] backendWaitLoop(snmp_fd=7, addr=0x109e143e8, side_cb=0x109d5b0cf)
D [21/Feb/2013:18:32:23 -0600] [Job 446] `/private/var/spool/cups/tmp/0033f51343e87' has 1 pages.
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster - opened PPD file "/private/etc/cups/ppd/Epson_Stylus_NX430.ppd"...
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster: size->width = 612, size->length = 792, size->top = 783.6, size->bottom = 8.4, size->left = 8.4, size->right = 603.6
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster: PreferredRotation = -90
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster - languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792
D [21/Feb/2013:18:32:23 -0600] [Job 446] STATE:
D [21/Feb/2013:18:32:23 -0600] [Job 446] Vendor matching mode is ON and the handoff color space requested is sRGB.
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster: band width = 2976, bytesPerRow = 11904, band height = 880, height = 3876
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster: context width = 2976, height = 880, bitsPerComponent = 8, bitsPerPixel = 32, bytesPerRow = 11904, bitmapInfo = 5, resolution = (360.000000, 360.000000)
D [21/Feb/2013:18:32:23 -0600] [Job 446] NOT using display list
D [21/Feb/2013:18:32:23 -0600] [Job 446] cgpdftoraster: bytes written for sheet 1 = 7856640
D [21/Feb/2013:18:32:23 -0600] [Job 446] End of messages
D [21/Feb/2013:18:32:23 -0600] [Job 446] printer-state=3(idle)
D [21/Feb/2013:18:32:23 -0600] [Job 446] printer-state-message="/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoes cpII.app/Contents/MacOS/rastertoescpII failed"
D [21/Feb/2013:18:32:23 -0600] [Job 446] printer-state-reasons=none
E [21/Feb/2013:18:37:24 -0600] [Job 446] Stopping unresponsive job!

I just upgraded my software to OS X 10.9.2 (13C64) and i can no longer use my printer (epsun stylus sx235w). any ideas why this would happen?

i just upgraded my software to OS X 10.9.2 (13C64) and i can no longer use my printer (epsun stylus sx235w). any ideas why this would happen?

Mavericks is the name of your operating system. It is otherwise known as OSX 10.9.
The previous versions were indeed "cat things".
The way you would know if you need to download new software from Epson is to go the Epson website and search for your printer there, look for downloads, and see if they have new software listed for 10.9.
You can revert your system back to what it was two weeks ago. This would be easier to do if you have a backup that you made prior to installing Mavericks (like with Time Machine). If you don't have a backup (sounds like you probably don't), you can look here for some directions about how to go back to the "Cat Thing" that you had prior to installing Mavericks: How to revert OS X back from Mavericks: Apple Support Communities
If all of this is too hard for you, you could take your Mac in to your Apple store and ask them to help you.

I can't add my wifi printer epson stylus nx430

Similar Messages

Maybe you are looking for