I can't generate a mapping

Hello,
I use OWB 9.2 on an AIX 5.1 system. A strange error occurs : I can't generate and deploy a mapping on which there is no error at validation. first, I get the message RTC-5161 : The deployment can not proceed because of an error during the generation or predeployment phase, then I get the message : oracle.wh.repos.sdk.exceptions.WBException:internal error:Mapping Generator.generate WBGeneratedObject[] is null or length 0 for my_mapping_name.
does someone have an idea about this ?
Thanks

Alain,
You seem to be running into the bug 3194339 that untimately refers to 3421798. The bug is not yet fixed but there is a workaroung on metalink.oracle.com (log into metalink, click on bugs and insert the bug number 3421798). Please take a look at the workaround.
Regards:
Igor

Similar Messages

How can I generate a map file with LabVIEW?

We wish to use a product which inserts code into our executable to prevent tampering with it by crackers. The program, however, takes the executable file, as well as the map file (which is commonly generated by c++ compilers) and uses the map file to determine where in the exe the critical routines that need protection are at. I can not, however, determine how to create such a map file for a LabVIEW generated executable. Is there a special build option I need to invoke?

Yes, I'm familar with NI's licensing technology, having talked with someone (you, Dennis, I believe) about it before. The problem we have is our software is sold to factories in China where there are no internet connections. We have a physical key 'dongle' which must be present in order for the executable to be willing to run. However, it appears that people are taking the executable which LabVIEW creates and they are editing it, probably by using a a debugger and tracing to the the code which checks for the dongles presence and bypassing it. To my knoweledge, NI's products don't do anything to prevent this, right?
We found a company which sells a product that encryptes, checksums, etc... an executable file, but it needs to know the layout of functions in the exe in order to determine which areas to focus the obfuscation on. They were sort of matter of fact when they said it needs the exe and the map file, as if they expected any language which produced an exe could produce a map file.

Can I use shapefile to generate base map

I have some data for arcview, I want to upload to spatial, what is the best way to do it? I know that I can generate the themes when I import a shapefile by map builder, but how can I generate base map? thanks

A base map is just a collection of themes.

Can we generate one report tab for each of the prompt values selected in the bobj 4.0 webi report.

can we generate one report tab which filters
with each prompt value selected in bobj 4.0 webi report.

Hi Shrinidhi ,
It can be achievable with static tabs created for each LOV .But this is not recommended because , object values can change dynamically .
It is good idea to use section on prompt object in the report .With sections great feature available is in larger report it’s easy to navigate using map. It displays the section tree.You can select the particular LOV to navigate.

Can we use XSLT mapping after graphical Mapping

Hi,
Can we use XSLT mapping after graphical mapping?
My requirement is to generate two namespace attributes in the target output.
So first I want to generate a structure using graphical mapping and then want to use XSLT mapping only to generate the second namespace XSI (leaving the rest of the structure as it is). Is it possible?
<ns1:Test xmlns:ns1="wmdata.dwbi.interface" xsi:schemaLocation="wmdata.dwbi.interface w_interface_1.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
Please post some solution. (I will reward points)
Br,
Madan Agrawal

Hi Madan,
Can we use XSLT mapping after graphical mapping?
To me it seems feasible...
But to using the two mappings one after another you will have to use BPM .
Use transformation step for this to use the mapping and change in structure.
Regards,

Dynamically generated Google Map in new window

I've got a detail page for restaurants and would like to have
a "MAP IT"
link that, when clicked, opens a map of the location in a new
window,
preferably using Google maps since I like them (but that's
not critical).
I've got the WebAssist extension but it will only embed the
map and you have
to enter the address to create it. so, my questions are:
1. How can I generate a Google map using fields from my
Recordset (I'd need
at least street and zip but it's probably better to use the
city and state
too)?
2. How can I have it open in a new browser window?
An extension would be best and easiest, but I'm open to any
possibility that
doesn't require a degree in advanced rocket science.
BTW, I have a Google Maps API for this site. I'm using PHP
and MySQL.
Thanks!
Mad Dog

"Mad Dog" <[email protected]> wrote in
message
news:f5hnhb$qrh$[email protected]..
>I found the answer and it turned out to be simple. The
info is here for
>both Google maps and Yahoo maps, though a couple of
things were confusing
>(like what's with the "+" signs?):
>
http://www.gdsland.com/tutorial/googlemap.php
>
> Here's what I ended up using for Google and it works
like a charm.
>
> <a href="
http://maps.google.com/?q=loc:<?=$row_Recordset['street'
> <?=$row_Recordset['city']?>,
<?=$row_Recordset['state']?>
> <?=$row_Recordset['zip']?>" target="new">MAP
IT!</a>
>
> One thing that messed me up for a while is it turns out
Google maps
> doesn't like a "#" coming at it. It truncates the
address at that point. A
> test record I was using had that as a suite number so
once I changed that
> in the database all is well and good.
I believe this is because the "#" is seen as the beginning of
the "hash"
value (location.hash)
See
http://www.tjkdesign.com/articles/locationobject.asp?who=MD&where=SF#boulange
> Good work, Mad Dog!
Yes indeed!
Thierry
Articles and Tutorials:
http://www.TJKDesign.com/go/?0
The perfect FAQ page:
http://www.TJKDesign.com/go/?9
CSS-P Templates:
http://www.TJKDesign.com/go/?1
CSS Tab Menu:
http://www.TJKDesign.com/go/?3

Is it possible without datasource can i generate report.

Hi,
I want to generate jasper report in adf11g. Is it possible without datasource can i generate report.
Map<String, Object> params = new HashMap<String, Object>();
params.put("reportTitle", "Hello Report World");
params.put("author", "Craig Conover");
params.put("startDate", (new java.util.Date()).toString());
JasperPrint jasperPrint =
JasperFillManager.fillReport(
jasperReport, params); so i dont want to use Datasource.or empty datasource.
I m getting some error if i dont use datasource then i m getting errot-- There is no document message.
Thanks

Not the good forum to ask for.
I don't remember it is possible. Test it in iReport. Simply don't define any datasource in your template and execute it. If it is executing it may be possible to do the same with jreport librairies by calling api. If it is not possible in iReport, it will not be possible in your application too.
Hope its help

Error Message: Can not generate mask for the LMB peripherals

I've added a bunch of perhipherals to my microblaze project and used the Generate Addresses button. I get the below error messges when I try to generate a net list. ERROR:EDK:3193 - issued from TCL procedure
   "::hw_lmb_bram_if_cntlr_v2_10_b::update_syslevel_mask" line 88
    C_MASK (IPNAME:lmb_bram_if_cntlr, INSTANCE:ilmb_cntlr) - Can not generate
   mask for the LMB peripherals! An address decode mask is assigned to all LMB
   peripherals connected to the MicroBlaze processor. The address decode mask is
   based on a set of decode bits that distinguish the LMB address space from the
   OPB/PLB address space. The error message indicates that a set of decode bits
   can not be found to generate a mask. Please modify the address map of the
   slaves connected to OPB/PLB to use a common address bit.
ERROR:EDK:1585 - IPNAME:lmb_bram_if_cntlr INSTANCE:ilmb_cntlr -
   E:\Xilinx\11.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v2_10_b\d
   ata\lmb_bram_if_cntlr_v2_1_0.mpd line 77 - error computing override value for
   C_MASK using tcl
ERROR:EDK:3193 - issued from TCL procedure
   "::hw_lmb_bram_if_cntlr_v2_10_b::update_syslevel_mask" line 88
    C_MASK (IPNAME:lmb_bram_if_cntlr, INSTANCE:dlmb_cntlr) - Can not generate
   mask for the LMB peripherals! An address decode mask is assigned to all LMB
   peripherals connected to the MicroBlaze processor. The address decode mask is
   based on a set of decode bits that distinguish the LMB address space from the
   OPB/PLB address space. The error message indicates that a set of decode bits
   can not be found to generate a mask. Please modify the address map of the
   slaves connected to OPB/PLB to use a common address bit.
ERROR:EDK:1585 - IPNAME:lmb_bram_if_cntlr INSTANCE:dlmb_cntlr -
   E:\Xilinx\11.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v2_10_b\d
   ata\lmb_bram_if_cntlr_v2_1_0.mpd line 77 - error computing override value for
   C_MASK using tcl I understand its complaining about the mask values, but I'm not exactly sure why. Here is the address map it shows:Address Map for Processor microblaze_0
(0000000000-0x00003fff) dlmb_cntlr    dlmb
(0000000000-0x00003fff) ilmb_cntlr    ilmb
(0x81800000-0x8180ffff) xps_intc_0    mb_plb
(0x81c00000-0x81c0ffff) xps_ll_temac_0    mb_plb
(0x83400000-0x8340ffff) Generic_SPI    mb_plb
(0x83c00000-0x83c0ffff) xps_timer_0    mb_plb
(0x84000000-0x8400ffff) RS232    mb_plb
(0x84400000-0x8440ffff) mdm_0    mb_plb
(0x8c000000-0x8fffffff) mpmc_0    mb_plb
(0xfffff000-0xffffffff) xps_gpio_0    mb_plb Any thoughts? I was unable to find another instance of this error message.

Version 11.3 I actually figured it out, its rather odd that the generate addresses button doesn't do this automatically. It appears that the mask was set to trigger use of the cache on a single bit. 0x00800000. I had enough devices added where automatic address generation was using the most significant bit meaning that bit was falling within other address spaces. I changed it to 0xFFFFC000. (Basically telling it to match addresses if all address signals above 16KB are zero). I don't know if that is the proper way to do it, but it accepted it. Now I'm fighting with some stuff regarding an FSL bus I added that apparently isn't quite properly setup, so I haven't found out yet if the processor likes that address mask. But the tools appear to like it.

How can i generate session.xml file?

hello
i am a beginner of toplink,i find that in my project,i must provide two xml format files,they are "session.xml" and a project xml file,to make the toplink works well,the project descriptor can be generated by using the mapping workbench,but how can i generate the "session.xml",now,what i can do is to modify the sample file that come with the toplink installation,i wonder if there is a graphic tool that can be used to generate it?
thanks for any helps!

Currently there is no UI support for creating or modifying sessions.xml. The DTD is provided in both the documentation as well as in the installed files (<TOPLINK_HOME>\core\sessions_4_5.dtd). The examples should also contain a variety of sessions.xml file to assist you.
Doug Clarke
Principal Product Manager, Oracle9iAS TopLink
Oracle Corporation

Is this the right to use or for iOS can use dynamic google maps embeded(can be embedded fo iOS)

function displayMap(e) {
var title = e.data.title,
latlng = e.data.lat + ',' + e.data.lng;
if (typeof device !='undefined' && device.platform.toLowerCase() == 'android') {
window.location = 'http://maps.google.com/maps?z=16&q=' + encodeURIComponent(title) + '@' + latlng;
} else {
$('#map h1').text(title);
$('#map div[data-role=content]').html('<img src="http://maps.google.com/maps/api/staticmap?center=>' + latlng + ' &zoom=16&size=320x420&markers=' + latlng + '&sensor=false">');
$.mobile.changePage('#map', 'fade', false, true);
my phonegap (Adobe press, Powers jQuery with dw 5.5) book (old book (c)2010-11) says for above code: // is this valid for today, is this the right to use or for iOS can use dynamic google maps embeded(can be embedded fo iOS)???
On iOS, calling window.location loads the map directly
into the app. That’s great until you realize that iOS devices
don’t have a Back button, so there’s no way to exit the
map. To get round this problem, I loaded a static map as
an image in the map page block. It’s not interactive, but at
least you can continue using the Travel Notes app after
viewing the map by clicking the Back button generated by
jQuery Mobile.

Well, this took me a while to get solved, but it is indeed solved.
I tried USB Overdrive and it could, and perhaps should work, but apparently it will not. When adding a device, it seems that USB Overdrive is not set up to handle any input device that does not register itself as either a Mouse or a Joystick. The VEC USB Footpedal that I'm using is "Device type: Other".
So, I went for Quickeys. And Quickeys can do it all. It did recognize the device, I was able to assign it to the scope of the particular audio playback app I wanted to use (Amazing Slow Downer OS X - which is truly amazing. Any musicians reading this who are looking for a way to learn pieces by ear, this does it better than anything else I've seen yet).
I created a shortcut in Quickeys for the ASD app; added the middle button of the foot pedal as the trigger; set one step, entering 'space bar' as the step (which toggles playback, similar to many audio players).
It all worked.
Quickeys is very confusing and seemingly featured with an endless array of options. Enter at your own risk. Ask me for help. This was the only way to get it done that I could find. I did write to the author of USB Overdrive asking him to please support additional devices as I did find some traction from gamers who like to use a foot pedal in addition to other input devices. There was a Windows-only management utility for the foot pedal that was intended for custom input, assigning the buttons to any keyboard input or mouse click event. It would be nice to have a simple and easy to use utility like this. But, Quickeys did do the job.
Thanks for your help, you guys!!!

Can we generate proforma invoice in case of POD for GI

Hi
Can you please clarify me the following....
Can we generate proforma billing after goods issue if the transaction is POD relevant.
while sending the goods to the ship-to a proforma invoice should accompany the goods.
Is it possible ?

Hi Anil,
Yes you can create Proforma invoice for the delivery after PGI even that delivery is relevant for POD.
You can accompany a proforma invoice while sending the goods to the ship-to party.
I hope it will help you,
Regards,
Murali.

How can I Generate two different reports from single execution of Test cases in NI teststand

Hi,
My requirement is to generate two different reports from NI teststand. One for the Logging of error descriptions and the other report is by default generated by the Teststand. How can i generate a txt file that contains error descriptions other than that mentioned in the default report?
Solved!
Go to Solution.

Do you need to do that just for these two sequences but not for other sequences? I don't see a problem to use SequenceFilePostStepRuntimeError. Create this callback in both sequence files and configure them to log into the same file. SequenceFilePostStepRuntimeError callback is called after each step of the sequence file if it has runtime error. You can access the calling step error information via RunState.Caller.Step.Result.Error property. Take a look to attached example.
The "other way" is useful if you need to log errors not for every step of the sequence file, but for some of them. This is more complex, because you need to create a custom step types for these steps. For the custom step you can create substeps (post-step in your case) which will be executed every time after step of this type executed. Then, this is you job to determine if error happened in the step, acces to step's error information is via Step.Result.Error property.
Also, be aware that step's post-expression is not executed in case of error in the step.
Sergey Kolbunov
CLA, CTD
Attachments:
SequenceFilePostStepRuntimeError_Demo.seq ‏7 KB

Can Designer generate ADF Entity Objects, View Objects and Apps Module ?

Hi all,
On what way can Designer integrate with JDeveloper (+ ADF) ?
Can Designer generate ADF Entity Objects, View Objects and Apps Module ?
Thank you for your help,
xtanto

Designer itself has no direct integration with JDeveloper. However, there are three options. First of all, you can get a JDeveloper extension (download this separately) that lets you create a Connection to a Designer repository. From that Connection you can find modules that you defined in Designer and generate Entity and View objects for the tables and columns that you used in those modules, and an Application Module. It does not create JSPs or other user interface objects.
Another option is to buy JHeadstart from Oracle. This contains a set of code generators and ADF extensions that include an ability to get information from a Designer repository. JHeadstart works fine for non-Designer users too, but was built by the same people who wrote Designer Headstart - they know the repository API intimately.
The third option is to download Oracle Designer Extension Builder (ODEB) which was just recently made available. This is a product of a collaboration between Designer users from the Oracle Development Tools Users Group (ODTUG) and Oracle to extend the capabilities of Designer with user written tools and utilities. You could use ODEB to write your own generators for ADF Business Components. Or you could wait and see if someone else in the user community does this. I hope that you or whoever does such a generator will be willing to share it with us all.

How can I install Google Maps on IOS 6?

Since I upgraded to IOS 6, Google Maps has been replaced by a poorer Apple version that doesn't support public transport. I want Google maps back. How can I install Google Maps on IOS 6 or downgrade to IOS 5?
Thanks.

Google Maps has not yet or does not look like they are creating a standalone app at this time.
It is not easy to downgrade, not recommended by Apple, very involved in order to do that. Again, not recommended.
Use MapQuest for now if you are unhappy with Apple Maps. I was never happy with Google Maps, so I have been using MapQuest for a long time for all directions.

How can i install google maps on an iphone 3gs with latest os

how can i install google maps on an iphone 3gs with latest os

Actually Apple has developed its own maps and no more have it in sync with google as it did before so now apple has its own mapping software.
http://www.nytimes.com/2012/09/20/technology/apple-ios-6-leaves-out-googles-maps .html?_r=0

I can't generate a mapping

Similar Messages

Maybe you are looking for