I can't get sound on my television when using apple tv

I can't get sound on my televsion when initiating apple tv from my macbook pro

Have you gone to settings > sound to make sure your built-in speakers are selected? That would be my first guess for troubleshooting.

Similar Messages

  • Can't get sound on a movie purchased from apple tv

    Hi , can't get sound on a film from apple just purchased ? John

    Welcome to the Apple Community.
    Try adjusting the audio out and/or the dolby digital settings.

  • In MIRO, how can I get a credit to balance when using dr/cr lines?

    When processing a logistics invoice verification document via MIRO, we're trying to post a credit memo against a purchase order with muliple lines (one return, and on non-return line).  The value of the return line is greater, and the invoice is billing for receipts/returns on mulitple lines on the PO (it has a credit amount for the entire return to be posted against the return line, and a restocking fee to be posted against a text based PO line). 
    In MIRO, I have selected credit memo and am posting a credit for a gross amount of $550 in the header.  The return line I'm trying to post against is for $575, and the non-return line for the restocking fee is for $25.  However, when I'm posting against both, the system is indicating that I'm out of balance by $50.  It appears that it's not calculating the $25 as a credit.  I've tried looking at documents around posting against returns and posting credits, but haven't seen anything that addresses this scenario.  I've also tried using negative amounts, but SAP does not accept these.  We're currently using SAP ECC 6.0.  How can I get this to balance?

    Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
    Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
    Regards.

  • Exporting to PDF - How Can I Get A Small File Size When Using Lots of Vector Art?

    I am trying to create a small PDF file for e-book distribution purposes. My Indesign pages contain a variety of photographs, vector icons and vector maps.
    A publisher in Britain who does similar books on a Mac using Creative Suite was able to create a 22-page document very similar to mine (similar icons, graphics, density, etc) that is only 2.84 mb, a small fraction of the file size that I'm getting! I've included a sample page of his below, which is a low-res jpeg, but on the original PDF all of the text and images (except the jpeg cliff background) are super sharp - they look like vectors when you zoom in. I've also included screenshots of his PDF export settings.
    I don't know if he's exporting directly out of Indesign, but my best guess is that he is.
    My vector-based icons, numbers and maps are bloating my PDFs considerably. When I remove them, the Indesign and exported PDF file sizes drop dramatically. For the life of me, I can't figure out how he got such small PDF files sizes using so much vector art! The PDF graphic compression settings don't seem to include any options for vector art.
    My vector art graphics (numbering, icons, maps) are all saved as Illustrator AI files and then placed in Indesign as linked graphics. My best guess as to why I can't achieve smaller PDF files is I'm either doing something wrong with the vector graphics themselves or handling/exporting them improperly out of Indesign.
    I am using CS4 for PC and am on a Dell Machine running Windows 7.

    I am trying to create a small PDF file for e-book distribution purposes. My Indesign pages contain a variety of photographs, vector icons and vector maps.
    A publisher in Britain who does similar books on a Mac using Creative Suite was able to create a 22-page document very similar to mine (similar icons, graphics, density, etc) that is only 2.84 mb, a small fraction of the file size that I'm getting! I've included a sample page of his below, which is a low-res jpeg, but on the original PDF all of the text and images (except the jpeg cliff background) are super sharp - they look like vectors when you zoom in. I've also included screenshots of his PDF export settings.
    I don't know if he's exporting directly out of Indesign, but my best guess is that he is.
    My vector-based icons, numbers and maps are bloating my PDFs considerably. When I remove them, the Indesign and exported PDF file sizes drop dramatically. For the life of me, I can't figure out how he got such small PDF files sizes using so much vector art! The PDF graphic compression settings don't seem to include any options for vector art.
    My vector art graphics (numbering, icons, maps) are all saved as Illustrator AI files and then placed in Indesign as linked graphics. My best guess as to why I can't achieve smaller PDF files is I'm either doing something wrong with the vector graphics themselves or handling/exporting them improperly out of Indesign.
    I am using CS4 for PC and am on a Dell Machine running Windows 7.

  • How can I get which radiobutton is checked when using jsf?

    I can't seem to find a way to get which of the radiobuttons in my form is checked. Help...

    I followed your advice and it apparently worked. We'll see for sure when I log in tomorrow.
    The black box actually asked for a password for a new keyring that I created yesterday named. When the box requested that specific keyring, I believed I know who was asking and why.
    That solved my problem.
    Thanks Matt!

  • How can I get to the photo tray when using iphoto with HP C6280 all-in-one printer

    How do I get the photo tray option to come up in iphoto from my mac notebook when I have an HP C6280 all-in-one printer

    I have an HP all-in-one C5140.  When I print from iPhoto the dialog that comes up has a "Presets" drop down at the bottom.  One of the choices is "Print from Photo Tray."  Is that there on yours?  If not make sure you have the latest software from HP.
    Dan

  • What is the white dot on my ipod screen?  i can't get rid of it even when using apps?

    If I click on the dot it brings up a translucent screen with other options: Favourites (star) Home (home button) Device (picture of an iphone) and the circle (gestures).  No matter what I do I cannot get rid of this icon and it is driving me mental!
    Message was edited by: dmayt
    Just did a further search and found that my question was alreaxdy answered by Jandt - thank you!

    The white dot is the button that brings up AssistiveTouch which allows you to use your iPod if you have difficulty touching the screen.
    To turn this function off, go to Settings > General > Accessibility > AssistiveTouch > OFF.

  • Can't get rid of stock photo when using iWeb but publishing to non-MobileMe

    On one of my pages I have a vertical column of photos with my photos from iPhoto that I dragged and dropped into iWeb. The page was originally based on an iWeb template, though I cannot remember which one.
    The problem I am having is that the stock photo sometimes shows up when I publish the website - even though I have dropped a photo in the space, saved it and re-published it. I have gone into the files and deleted the stock photo and I even went to my webhost and deleted the stupid thing there as well. Regardless, the #*!!%@ thing keeps showing up.
    I have reloaded the page to my webhost multiple times. I had the same problem a day or two ago and eventually the stock photo stopped showing up, but I have no idea what kind of hocus pocus made it finally disappear and the correct photo show in its place.
    Any ideas?
    thanks,
    roxpat

    It is apparently an iWeb issue. In the template that I used, I guess some aspects are just "in there" and are not able to be removed.
    I ultimately removed all of the photos from the page since they had originally started as "drops" into the placeholders and put my photos in manually (not a big deal, of course). I saved it and "published it" to the folder. . .and there was that stupid photo again. I yanked the photo and put it in the trash and went to my webhost and removed the same photo. . .and finally the stock photo went away.
    Every time I update the site (or those pages, anyway), I have to go in and remove that #%^#^& photo.
    The moral of the story is that I need to just rebuild the page from scratch - without a template. It shouldn't be too hard, but it's more effort than I want to exert at this point
    roxpat

  • How can I get sound from tv or stereo when watching netflix on MacBook Air?

    I have my macbook air hooked up to my tv and want to watch netflix but the only sound is from my macbook.  How can I get sound from other sources ie tv or stereo?

    Check with Netflix for their system requirements.

  • Can't get sound from my midi channels

    Hello. I've been using Logic 8 for a while. 2 days ago I updated to the newest version 8.0.1 and after I did it, I can't get sound from my midi channels. Before the update I could use my Ivory pianos perfectly, but after the update I can't. I've tried every setup I can imagine. I've been here sitting for hours trying to fix it but I can't .
    Logic recognizes my keyboard, since I play...all the notes appear on the transport bar, but i can't get sound from any sampler (Ivory, EXS, EVP88, etc).
    I've checked my outputs, etc...but nothing.
    Please help me!!! I'm desperate!
    Thanks

    Do you hear the Audio tracks and only Software Instruments are not working od don't you get any output at all? I was just assuming that through the update your Apogee has been removed as your Audio device in Preferences->Audio->devices.

  • Can't get sound from many websites.

    I can't get sound on my PowerMac from MANY websites (such as Hallmark.com, YouTube, some blogs, etc.). Yet I'm able to get sound on those same sites on my iBook. The PowerMac has no sound problems on other websites or in iTune function, sound effects, output or input. Anyone out there experience a similar problem or have any ideas as to what the problem might be? Thanks.
    PowerMac 8,1   Mac OS X (10.4.7)  

    Hi, why wouldn't you suspect the earbuds, since if I'm reading this correctly, they don't work with different software, or any of your devices?
    On the Mac Pro, Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • Can't get sound from Insignia BT headphones w/ BT-equipped dv3t

    Both are brand-new, I charged the headphones and downloaded the updated drivers from www.broadcom.com (actually Vista seemed to do it automatically) and the device is paired but I can't get any sound out of it (it's turned on:-)).
    Under the Playback tab in the Sound control panel there are three items:
    Speakers: Bluetooth Hands-free Audio
    Speakers and Headphones: IDT High Definition Audio CODEC
    Independent Headphones: IDT High Definition Audio CODEC
    All say they are working, but when I test the sound of each one I only get sound from the notebook speakers using the second option. The only weird thing I can think of is that I had the USB adapter plugged in when I downloaded the drivers, so maybe it downloaded drivers designed to work through USB? (I can't get sound with the adapter plugged in, though, either).
    Any suggestions welcome, I really want to get this to work and not have to send the headphones back to seller (which is what Insignia tech support told me to do).
    P.S. I know I have BT turned on because I'm also connected to a wireless home network, they go together.

    Hello again,
    oops, I must have missed your last message... sorry for that!
    I have to say, that I don t have my digital sound system that long, that I can answer this question for sure. However...
    You re right, that it should be possible, although I wasn t able to find a way to do that... yet... Somewhere (don t know if it was this forum or another place) I ve read, that the SPDIF support for Windows Vista isn t that nice at this time... perhaps a new driver will solve this
    Furthermore... I don t use the Media Center that much. So I don t even know if there is any option to set the output device (within the application Media Center). That would be important to realize "the best of both worlds". Explanation: If you want headphones support, you (always) have to leave the Speakers device as default. Other applications (such as Winamp,...) allow us to set the output device (in Winamp for example you can set it under the preferences Output -> Directsound device) to the SPDIF device, although we have selected "Speakers" as default in the control panel... nice, isn t it's For sure... if it would work...
    That way you don t get a(n) AC3/DTS signal via SPDIF... so, if you use Windows Vista (I can't answer your question related to other operating systems, because of my newly purchased system -> I haven t used it on XP) the only way that I know ( til now) is to select the SPDIF device as default...

  • I can't get sound from my macbook pro to my hdtv.

    I have tried using cables that go from headphone jack to the one on the tv, from the audio input to the headphone jack on my mac and another iwire digital optical cable that only fit in the digital audio out at the back of my tv. Nothing worked. I can only get sound out of the laptop. Please help, this is driving me crazy. I get picture just fine however.
    I have a Panasonic Viera 42" tv.
    Thanks.

    Hi Brad,
    You'll need to run a 3.5mm stereo mini jack (on the MBP end) to RCA (usually red and white) and connect the RCA cables to the inputs which correspond with the video input you're using, then select that set of inputs on the TV.

  • [SOLVED] Can't get sound to work.

    Hello, I installed archlinux a few days ago, I love it!
    But I can't get sound to work.
    I followed the alsa archwiki, but I still couldn't get it work.
    I'm a real noob.
    Someone please help.
    Last edited by egb (2011-02-16 22:45:12)

    JokerBoy wrote:
    Inxsible wrote:
    Try this: as your user NOT root
    alsamixer
    why not? i use alsamixer as root to set all "globally". and "alsactl store" after that.
    egb - make also sure you added yourself to audio group.
    yeah, I did that some time ago
    edit: oh and I get this when I do the "alsactl store":
    alsactl: save_state:1504: No soundcards found...
    Last edited by egb (2011-02-16 10:30:34)

  • Can't get sound to work [SOLVED]

    Hi, I'm new to arch/linux in general. Built a computer, and can't get sound to work. I ran Ubuntu for a short period of time, and sound worked there, so I'm assuming there's no hardware issue here.
    I'm a little bit stuck as to what I should be doing. Help?
    Last edited by uma (2012-01-28 22:51:25)

    Start with the wiki: https://wiki.archlinux.org/index.php/Ad … chitecture
    If you still can't figure it out and you want help, at least post some info, instead of 'can't get it to work' (this implies that you tried something, but what?).

Maybe you are looking for