I can't get the print sizes I want in iPhoto 6

Got the new iMac about three weeks ago, and have installed iLife '06.
I've just tried to print a photo out 4 x 6 and the preview shows the photo in the bottom right of the screen (which is how it used to be on iLife '04).
However, when printed, the picture is just off centre of the A4 photographic paper and measures approximately 2 inches x 2.5 inches.
It's the same if I try to print a 5 x 7 print. The resulting photo measures approx 2.5 inches x 3 inches.
Why is this? Do I need to install drivers?
When I print letters or web pages, everything is fine.
I'm using an Epsom Stylus Photo R300 printer, by the way.
Any help would be greatly appreciated.
Many thanks.

I find the iPhoto print drivers terrible and have
given up trying to print directly from iPhoto. If you
have PhotoShop, open up the image and print from
PhotoShop. It has much better printer controls and
has Color Correcting for adjusting the colors for
most printers. I normally use the standard 1998
embedded color profile for all my PhotoShop work.
Hope it helps, Bill
MacBook Pro Mac OS X (10.4.5)
Unfortunately she does not have Photoshop. This seems like a serious flaw in Iphoto 6. Kinds of reminds me of Microsoft problems. There must be a solution. Yes?

Similar Messages

  • Getting the print sizes i want

    I am having an issue with photos that I want to size print. If i have a photo all ready to be printed and want to print it as an 8X10, when i put up the crop marks for 8X10, the aera that i want in the photo gets cut off. It is like putting an 8X10 box on the photo versus putting the photo in an 8X10 box. Is there a way to set the file up to print that photo to any size and get that photo to fit the crop size (4X6, 8X10, etc)?
    Thanks, Brian

    I am sending them out to Mpix. When I upload the file and then go select a photo print size, i am not getting what i want. I just don't want to have photos up there and people would not be able to select the size that want and get the print to be the way it should. I know that sending the files to Mpix and how they print there is probably not a  Lightroom issue, but i just want to make sure what i export from LR is going to work.
    Thanks

  • In iPhoto most of my photos appear to have been replaced by much smaller versions. What has happened and how can I get the full size photos back?

    In iPhoto most of my photos appear to have been replaced by much smaller versions. What has happened and how can I get the full size photos back?

    That is either a bug in Firefox 5 or the script has a problem with Firefox 5.<br />
    It works in all other Firefox versions like Firefox 3 and 4 and 6 (Aurora) and 7 (Nightly).

  • I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy. Can any one help

    I have an Imac running snow leopard and have recently installed a cannon i-sensys lbp7750Cdn printer since then I can't get the printer working and the air port has lost the DNS servers; if it ever had them!!! but it dose not look happy and it is telling me so. Can any one help please?

    Snow Leopard breaks quite a few drivers - my Canon exhibited the same problem.
    I eventually found updated drivers on the Canon website. You can try that with the HP, but if the all-in-one is more than a year or so old, don't hold your breath.
    You can also try Software Update to see if it will offer new drivers, or failing that go to the Support Downloads site and search for HP updates.
    In fact there's a new one for HP at the top of the list just now.
    You may not necessarily want the latest one, though - check the specs to see if your model is covered; if not, search for the previous update etc.

  • I am using windows 7 and can't get the print drives to load for F2210 printer

    I am using windows 7 and can't get the print drives to load for F2210 printer and I keep receiving different fatal error codes.

    Hello @Imvertical 
    Welcome to the forums!
    I read about how you're attempting to install your Deskjet F2210 on your Windows 7 system and receive Fatal Error codes. I will do my best to help and make some suggestions for you to try. 
    To being, try a standard copy from the unit to see if it will copy. If copies work, continue troubleshooting. If not, let me know what happened when you made a copy.
    Next:
    Perform a Level 3 uninstall.
    There are 2 ways you can run the uninstall:
    From Original installation CD:
    1. Insert CD into drive, and then cancel the installer
    2. Click Start and open 'Computer', and then right click on the CD drive and open
    3. Open folder Util
    4. Open folder CCC
    5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
    10. Run the download to reinstall the printer
    If software was downloaded and extracted to your system:
    1. Click Start and type %temp% in the run field
    2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
    3. Open folder Util
    4. Open folder CCC
    5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
    10. Run the download to reinstall the printer
    Please let me know if the installation worked after the Level 3 uninstall.
    Good luck and have a nice Wednesday!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

  • Can I get the queue size for ExecutorService

    Can I get the queue size for ExecutorService created by newSingleThreadExecutor.

    You would need to go to the implemented class or another interface. That interface does not define that method - read the JavaDoc on the API for more

  • Now that my operating system was updated to OSX 10.9.2 (Mavericks) I can not get the print drivers installed

    Now that my operating system was updated to OSX 10.9.2 (Mavericks) I can not get the print drivers installed

    For an existing printer, see > OS X Mavericks: Reset the printing system
    To setup a new printer, see > OS X Mavericks: Set up a printer

  • Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

    I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

    It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
    Regards.

  • I can't get the printer to accept a different paper size. I'm trying to print on 6.5x10.

    I have an HP 8600 All-in-One and am printing from a Mac running 10.6.  I changed the page setup to 6.5x10, but keep getting a message that the printer and document paper sizes don't match.
    This question was solved.
    View Solution.

    Hi dawncheryl,
    What printing application are you using?
    Follow the steps in the documents below, and let me know what you find out?
    Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing in Microsoft Word
    Macintosh: Using the Paper Type/Quality Panel to Change Print Settings in Mac OS X 10.5 and 10.6
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • How can I get the printed message of stored procedure in JPA

    Hi, I'm using JPA to invoke stored procedure in database, a segment of the sproc is like below:
    if @create_type != 'a1' and @create_type != 'a'
         begin
         print 'create type must be either ''a1'' if you pass in A1 ID, or ''a'' if you pass in User ID'
         select 0 as "Result"
         endI can get the 0 as the result, it means business operation failed currently, but how could I get the message of 'create type must be either ''a1'' if you pass in A1 ID, or ''a'' if you pass in User ID'?
    That information is important as it indicates why the operation failed.
    Thanks

    how can i get rows count returned by stored procedure in oracle sql developer?
    Procedures do NOT return a value - functions return a value.
    A procedure executes whatever code it contains. That code could contain many queries that produce many row counts.
    Does your procedure take one or more IN, OUT or IN OUT parameters?
    See example 8-1 for an example of executing a procedure that has an OUT parameter.
    http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/subprograms.htm#CHDBIEEE

  • How can I get the touching size from TouchPoint class

    I built a WPF project
    MainWindow.xaml:
    <Window x:Class="TouchSize.MainWindow"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    Title="MainWindow" Height="350" Width="525" TouchMove="Window_TouchMove" WindowState="Maximized" TouchDown="Window_TouchMove">
    <Grid>
    <TextBox x:Name="TextBoxOutput" TextWrapping="Wrap" Text="TextBox" Padding="5" Margin="5" IsReadOnly="True" VerticalScrollBarVisibility="Auto" HorizontalScrollBarVisibility="Auto"/>
    </Grid>
    </Window>
    MainWindow.xaml.cs:
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using System.Windows;
    using System.Windows.Controls;
    using System.Windows.Data;
    using System.Windows.Documents;
    using System.Windows.Input;
    using System.Windows.Media;
    using System.Windows.Media.Imaging;
    using System.Windows.Navigation;
    using System.Windows.Shapes;
    namespace TouchSize
    /// <summary>
    /// Interaction logic for MainWindow.xaml
    /// </summary>
    public partial class MainWindow : Window
    public MainWindow()
    InitializeComponent();
    private void Window_TouchMove(object sender, TouchEventArgs e)
    TouchPoint tp = e.TouchDevice.GetTouchPoint(this);
    I got the TouchPoint while i touching the touch screen, and i want to get the size of the Touching point.
    I tried tp.Size but is zero.
    Thank you.

    If the Size is always 0 in a TouchUp event handler, your touch screen hardware may be the issue. Appearantly some touch screens report sizes in a non-standard way and then you cannot really get the size of the TouchPoint. Please refer to the following
    link for more information:
    http://nuigroup.com/forums/viewthread/10979/#59933.
    Please also remember to close your threads by marking all helpful posts as answer and then start a new thread if you have a new question.

  • How do i get the print size to enlarge on an email print out?

    Everything I send from my lap top to be printed is so small I can hardly read it. How do I enlarge the print out?

    What model of printer are you using?
    Also are you printing directly from your computer or using ePrint?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How can I get the printer icon to show in 3.6.6

    In previous versions a printer icon showed near the top of the page - I would like to have that again instead of doing a File-Print action or control-p.

    For details of how to add the print icon to the toolbar see [[how to customize the toolbar]].

  • I disconnected my printer from my iMac to move them and now I can't get the printer to work. I have restarted the computer but it doesn't seem to recognize the printer

    printer assistance

    Turn the printer off then back on. If that didn't help, open System Preferences > Print & Scan (or Print & Fax) for a prior Mac OS X then select the Print ab.
    If you see the printer on the left, select it then click -  (minus)
    Now click + to reset the printer.
    Might also help to clear the queue.
    Click:  Open Print Queue
    Delte any files in the list then click delete.

Maybe you are looking for