I can't print a selection of a text. Even when I selct "selection" in the print dialogue box, the entire page prints. I have tried this over and over wit
I can do this in IE, but not in Firefox.
H i meetzie,
Please see these troubleshooting steps for printing: [[[Fix printing problems in Firefox]]]
Also, check out the latest version 29, there are some security updates and ui updates.
Similar Messages
-
After iPad update I can't access my notes! Crashes opening with blank page. I have tried turning on and off. I have tried the reset to original. I have tried downloading again. Now what? I have important information that I need to get....
If you have set this phone up, then there would not necessarily be a solution here until you have been verify with the provider that everything is provisioned correctly on their end. Since the 3G comes from your cellular provider, if the settings are correct on the phone, then you should work with the carrier next.
-
I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?
Please post your problem in the Final Cut Studio (Final Cut Pro 7) forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
You'll get the help you need in that forum. -
I am unable to connect to the itunes store to update apps on my ipad.
I have tried both wifi and cellular connections.
I have the most recent updates of the operating system and itunes.
I have powered down and reset and restored.
I have no problem purchasing and downloading new apps or songs.
Please help!Refer to this article"
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368 -
I have an Ipod touch 8GB, an Imac and an apple laptop. I have had this Ipod for years and it has been synced at different times to my Imac and laptop. Recently the battery ran way down on my Ipod. I plugged it into my Imac. After it charge I had to restore it. After I restored it Itunes couldn't connect to it because, "An unknown error occurred". I tried to connect it to Itunes on my laptop and got the same error message. I have tried different USB cables. Since Itunes won't connect, I can't do another restore. I don't know what do try from here.
Some additional info that might be related to this. Just before this Ipod problem came up I crashed my hard disk on the Imac. I had to erase it and reload all my stuff (I was able to copy the contents to a hard drive connected to my laptop using the firewire - I couldn't use time machine because of the crashed HD.) My Imac has been restored to the latest Itunes - I am running OSX 10.6.8.Thanks for the help Ricky.
I did put my iPod into DFU and iTunes recognized it in restore mode. After restore I am back where I was before - iTunes cannot connect because of an unknown error.
I have installed Jailbreak to see if I can bypass itunes but haven't succeeded. I can't get my computer to recopgnize the iPod as a device.
I'll take it to a Genius bar next time I am in the area of one. Until then I'll probably continue to try hacks to get it connected.
Dan -
I am trying to sync my new iPad with iTunes on my iMac but when I attach the iPad to the computer via USB it still doesn;t show up as a device in iTunes. What am I doing wrong? I have checked all the tech specs and all seem ok. I bought the iPad in the U.S. - would this make a difference?
What you provided is not everything mentioned.
Your Mac is running 10.5.8 or later and iTunes 10?
You are connecting the iPad direct to a USB port on your Mac and you have tried every port?
You have reinstalled the Apple Mobile Device Service?
If your Mac is running Snow Leopard - 10.6, have you checked this link?
http://support.apple.com/kb/TS3540 -
Hp photosmart premium wireless C309 can't print after updating to IE 9 and i think java script
hp photosmart premium wireless C309 can't print after updating to IE 9 and i think java script. I am a realtor working from home and inorder to use the forms it required I update to IE9 and I think java, this is the link. http://www.car.org/tools/zipform6/ After doing so my printer does not work. I tried to go on line and reinstall from a link on line but it did not work. I don't know what to delete and what to add and how to get the " HP sSolution center" to work again. the printer was already poor performance from day one. Always having to unplug and restart and the black ink always runs out too quick. but right now my concern is just being able to print and scan. I am in the middle of a deal and can not communicate with all parties effectively. please help
What error messages are you getting?
What OS are you using?
How is the printer connected to the computer?
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
How do I get a PDF document put into an attachment form that I can drag to an e-mail. Usually I get an icon showing an spiral note book which then becomes an attachment when I drag it to the e-mail, but occasionally it stays in PDF and prints out on the e-mail. What have I done differently?
Thanks again for the detailed instructions Srini!
And I really hate to be a pest . . . but . . .
Using your example and not modifying it, I get the e-mail form filled out correctly and the pdf attached, however, I'm not prompted to sign it.
Any more clues? -
When I click on the print icon or file-print, nothing happens at all.
Is your printer selected? <br />
Is '''Print to File''' selected, where the web page is being printed to a file and not being sent to your printer?
See the screenshot below. -
I'm trying to download sheet music and need to run sibelius scorch add-on in 32 bit model. I have a mac running lion and the latest safari. I have downloaded FireFox 6 and run it in 32 bit but still I can't see the music score to print. Can anyone help?
Hello,
There are no files like that in that folder (com.apple.safari). They all have long numbers with .jpeg or .png at the end. That's what I meant by I cannot find any files like those mentioned in all the helps I read today. BTW-it's still crashing - no particular pattern to it at all.
The only two things I have downloaded recently is a new version of Flash and a Mac-driven update to Office.
Thank you very much for your attempt to help us.
J. -
Please help me add back the PDF Printer - I am missing the PDF Printer (PDFMaker) and have tried uninstalling and reinstalling Adobe Professional 10, I have tried repairing it and made sure the options for PDFMaker are selected, to no avail. I need the PDF Printer to use with our document comparison product, using the add printer options and adding the Adobe converters doesn't fix this issue either, it just adds an option to convert documents to PDF to a local folder which doesn't fix the issue.
I have a contract for Adobe Support but cannot reach a technician by 1-800 number, does anyone (1) have a solution to this problem? and (2) a telephone number for which I can call for assistance?
Thanks![discussion moved to Creating, Editing & Exporting PDFs forum]
-
How do I undo an update to pages 2.1 on an iPad 2? I can no longer open a document previously saved, even when I try to open it in the iCloud and on my Mac.
With IOS Pages v2.0 and v2.1, Apple introduced a new document format that is incompatible with prior Pages versions on IOS or OS X Pages ’09. Opening older documents with these recent versions of Pages will permanently prevent the document from opening in earlier versions of Pages on IOS or OS X.
Nice of Apple to warn people.
There is no undo of an iTunes application update, short of forcing iTunes to restore IOS v6 back on that iPad 2. Even if you did that, you won't find the IOS Pages v1.7.2 in the iTunes store now.
IOS Pages v2+ will allow you to export content in Word .docx format. You do this by first tapping the box with an up-arrow in it (next to the left-most +). A menu will slide up — choose Send a Copy. Select a document icon. Pick Mail, and then Word. Your Pages v2.1 document will now be converted to Word .docx, and attached to an email body. Fill in the to address and send. -
i had many problems setting this printer (Canon MX7520) with my Mac so i don't want to reset the settings since I got most of them to work now. However, now it seems that whenever i try to AirPrint a document, it wants to print to 4x6 (photo) paper and not the regular paper. I have tried everything i can think of, but nothing seems to work. if you have any suggestions, i would be very grateful.
ok...I'm only talking about printing from an iOs device. The first time I set up the printer, all the documents printed to regular paper (tray #2) and photos would print to the 4 x 6 tray (tray #1.) However, there were other problems with the printer so I reset everything. Now when I 'AirPrint', it prints all documents to the 4 x 6 tray (tray #1). Something has been changed, but I'm not sure how nor how to fix it.
-
How can I adjust ADE so that I can see the entire page of a graphic novel (.epub)?
You can reduce or increase the font size of the page according to the way you like. Click on "Reading" under the Menu option -> "EPUB Text Size". Select appropriate font size from this option.
Reduce or decrease the font size so that you can see the entire page. -
How do I sort a selection, not the entire table?
I have a spreadsheet in numbers that I only need to sort a selected section, not the entire table. In the previous version of numbers, it allowed 'sort selected range', but I can't find that in the newer version. When I have the selection outlined, the entire table sorts -- ??
Ann,
Nobody here in the Discussions has reported finding a way to sort selected rows, as was possible in Numbers 2.3. It seems that it was just left out of the new version to streamline the interface.
The workaround would be to structure your Tables such that content requiring separate sorting would be in a separate table.
Jerry
Maybe you are looking for
-
Will there ever be a fix for Animated Gifs OS 10.5.8
I realize this extremely stupid bug which has/had been around for many years was apparently fixed in 10.6, but that upgrade is simply not an option for me (as, 10.6 will not install on this machine.) the problem is very well known (and many years old
-
I want to use a with thru and from firefox mozilla
do you have an email I can use
-
BI 7.0 Security: Replace SAP_ALL with alternative solution
Hello, In an effort to remove SAP_ALL from user accounts in BI 7.0, I need to find an alternative solution for allowing users to create, execute, and delete BEx queries. Initially, I was thinking of creating two roles, derived from the SAP_ALL templ
-
7.0 dispatcher not starting - Missing delimiter on command line
Hi, while testing my dispatcher on 7.0 the first time i get the following message: D:\Program Files (x86)\SAP\IdM\Identity Center\Service-Scripts>Dispatcher_Servic e_disp1.bat test Running MxDispatcher_disp1. [21.04.2009 16:45:24-625] - Initialized l
-
Optimal resolution for importing graphics?
What is the best resolution for importing background images into keynote? I'm working on a 800 x 600 presentation and am wondering what resolution of file I can get away with using as I have quite a few full background images. Can I get away with 72