I can't see the Array element in actionscript after updating to latest nightly build

hey guys... so i have a small issue... i just updated to the  latest nightlybuild, and for some reason i dont see Array as a datatype in the intelasence...
When i do type "var temp:Array = new Array()" then i dont get any errors... but when i do "temp. " i dont see any functions that relate to the array datatype... i was wondering if thats a bug? or if its something that was taken out??
oh, and i can't see Filereferencelist in the intelessence either...

Does everything compile fine and the super class of your webservice is valid and in your library path?
Please see my previous post about playerglobal.swc being read properly. You can verify this in a few different ways: compile, expand the SWC in package explorer, search in the open type dialog, etc.
PLEASE make sure you're in a clean workspace. As I said before, once FB Beta 2 caches the SDK, you can't effectively force builder to refresh the cache. You can surgically remove the cache by deleting the .metadata/.plugins/com.adobe.flexbuilder.codemodel folder or you can start in a clean workspace, modify your nightly SDK, add it to FB and create your project.
Jason San Jose
Quality Engineer, Flash Builder

Similar Messages

  • How can i see the Asset purchase order & GR after settlement

    Hello Gurus,
    Would you please tell me how can i check the Asset Purchase order, which is settled (WBS Element)? How can i see the GR document for the specific asset? & if i treat as a expeneses toward the project where i get the GR/ PO in asset explorer?
    Warm Regards,
    Dhananjay Rahane.

    Dear,
    Dhanajay.
    Purchase order related to asset you can see in Asset Master itself. Go to AS03 - Environment  ( Menu bar ) - Click on Purchase Order. Here you will have all the relevant PO's relating to asset.
    GR you can see in PO at a Purchase Order history. The data relating to asset you can  see in left hand side navigation in AW01N Asset Explorer. Like as Vendor, PO's, etc.
    WBS in PO you can see in Account Assignment Tab if your PO is created with N. ( Network PO ). WBS linked to Network you can see in CJ20N ( Project Builder ). 
    WBS Actual values can see in report CJI3 Actual Cost & Revenues.
    I hope this helps you to solve your issue. If you have any doubts feel free to share.
    Regards,
    Pankaj A Bhalerao.

  • HT4859 can i see the contents of my iphone after a back-up to icloud?

    I just set my iphone to back-up on icloud and tried a sync.  I don't see any of my apps or photos on icloud?

    Welcome to the Apple Community.
    You can see the back up file at settings > iCloud > backup & storage > manage..... But you can't see the contents of the backup file.
    Is your profile correct, the iPhone 3G can't use iCloud.

  • AC100 doesn't see the built in 3G modem after update to kernel 2.2

    Hello everybody!
    Does someone have a solution for this issue?
    I've had the AC100-10V for quite a few months and everything worked fine until I have upgraded via Servie station to Android 2.2.
    Now there is *no sign* of the built in 3G modem in the system. *I cant use it anymore.*
    *All menu entries regarding to this feature and also the icon for mobile networks disappeared!*
    What can I do to get it working again?
    Please help me!

    There is no problem with my AC100-10V after update - 3G works as expected.
    Did you try resetting the device? (Factory reset)
    Consider finding a Toshiba service and return it on warranty.

  • Can't see the cloud icons except immediately after connecting to net

    I recently upgraded my PHone 5 to IOS7, and I have iTUnes MAtch and most of my collection in the cloud.   I see cloud icons (with the red arrow) next to songs and albums that are only on the cloud if my phone has been disconnected from the internet and reconnects.  But the icons disappear after clicking around iTunes into new windows, and the only reliable way to see them again it to disconnect from the net 9i.e. go into airplane mode) then reconnect.  Shouldn't I be seeing them all the time for material that is on the cloud, so that I can have the option to download songs or albums to my phone?

    I updated 3 computers a week ago and everything appeared to be OK.  Then, last night I noticed that some JPEG preview images were not being displayed in the Finder.  On top of that, each file exhibiting that problem could not be displayed in Preview but in Photoshop looked fine.
    Since all the these images were on a secondary, internal drive I decided to run the Disk Utility and use the Repair Disk option.  I immediately  got a dialog box stating that the drive could not be unmounted because some of the images were in use.  No, they were not.  The only way out of this mess was to reboot.  Then, the secondary drive would unmount and I could run Disk Utility.
    A few of these image were also on my wife's computer so I checked to see if they could be opened by Preview and that the Finder icon was correct.  No problems.  After seeing that, I transferred the files to my computer and...the Finder icons reverted to a generic form and I could not open them in Preview.
    Since then I have erased the boot drive twice, loaded 10.6 and then updated combo u;dated in both cases) to either 10.6.8 or 10.6.7.  When I updated to 10.6.8 the problem returned.  However, when I updated to 10.6.7 everything was as expected.
    Update 10.6.8 has some serious problems which raises the question:  Why has nothing been done by Apple to correct the problem?  This is NOT right.

  • I can't see the button and text item, After compile...

    I bring a form source at the another ERP application.
    and compile it at the our ERP application.
    There is no problem at compiling file...
    comfile succesfully complete...
    but There is no text item and button when i execute program...
    What is the problem --; Help me ~~

    at oracle E-Business Suite
    We add-on a form program
    and i execute the program to use program.
    but there is no button and text item at form. ^^

  • Can't get the apple widgets to work after update

    I have the same problem, but only with the apple widgets such as calculator, dictionary, weather and world clock. At some point I for some reason put them in the ~/library/widgets folder, and the problem arose when I installed 10.4.5 with the new updates. Putting the new ones in the folder and deleting the old ones did not help, nor did moving them back into the /library/widgets folder.

    I suggest running the combo update for either .5 (again) or .6. And, as the previous poster suggested, repair permissions after the update/restart.
    Combo updates:
    10.4.5
    10.4.6

  • When I open my premiere elements 9, I can't see the workspace, I have to restart the program many times until it works, what happens??

    Somebody can help me, the program was fantàstic, but a few months ago, when I open my premiere I can't see the workspace, the program doesn't show me an error message, but I have to restart Windows several times until I can work normally, what happens, adobe premiere have some problems with other programs installed? I don't understand, I have a serial number, I buy a dell with the program installed, with Windows 7.
    Can somebody help me, it's very important for me this program and I use it a lot

    mcaro5
    Thanks for reporting what worked for you with regard to your Premiere Elements 9 issue. Your results will be helpful to all those who find themselves in the same situation that you encountered. It is good that the suggestion worked for you also since often problems with the same symptoms can (often do) have different causes and fixes.
    Best wishes as you move forward with your Premiere Elements projects.
    ATR

  • How can I set the caption text of picture controls inside an array or how can I choose which array element is assigned using the array elements caption text property.

    I have 8 picture controls inside an array and I would like to set the caption text of these controls.
    I have used the property node of the array and used the array elements property caption text to set the text.
    The problem is however that I set the same text to all the picture controls inside the array.
    My question is how to set caption text of specific elements (Picture control) that I have so far only been able to access using the array elements caption text property.

    Some more help
    1 You could use the caption of the array and place it in front of the selected picture and update that using property nodes.
    2 Like Norbett said if you use a cluster of pictures then their caption can be updated individually.
    Here is a an example that demonstrates the above
    David
    Attachments:
    Modify the Captions Of Pictures.vi ‏83 KB

  • I am new to Photoshop Elements.  How can I see the exif data of my photograph?

    I am new to Photoshop Elements.  How can I see the exif data of a photo?

    I have Elements 10.  Sorry I am really struggling with the programme and I
    don’t see the word Menu anywhere on the editor screen.
    Rev. Dr. Jill Morley
    PO Box 51059
    Musgrave Rd.
    Durban.
    [email protected]
    0837791978 (c)
    0312080473 (h) and (f)

  • How can I see the numbers of lines selected in a Multiple Selection Box?

    Hi everybody,
    what I want to do is to get in an array of numbers all the lines selected.
    For instance, if I select the rows 1,4 and 7 from a Multiple Selection Box
    of 10 rows in total, how can I see that array when the rows 1,4 and 7 are
    selected?
    Because I want to connect this numbers to Case Structure and if the only
    rows selected are 1,4 and 7, the Case Structure will only realize this cases,
    and the rest will be ignored.
    I'm sure there is some way to get what I want.
    Thank you for your helpful.

    THANK YOU VERY MUCH. IT WORKS PERFECTLY!!!
    "Dennis Knutson" wrote:
    >>If you just wire the list box to an array indicator, you will see that
    the>output is an array of the selected items. Auto index the array through
    a>for loop that has your case statement inside.>>Dennis Knutson>>"Carlos
    Jorge" wrote>>Hi everybody,>>what I want to do is to
    get in an array of numbers all the>lines selected.>For instance, if I select
    the rows 1,4 and 7 from a Multiple>Selection Box>of 10 rows in total, how
    can I see that array when the rows>1,4 and 7 are>selected?>>Because I want
    to connect this numbers to Case Structure>and if the only>rows selected are
    1,4 and 7, the Case Structure will only>realize this cases,>and
    the rest
    will be ignored.>>I'm sure there is some>way to get what I want.>>Thank you
    for your helpful.>>

  • When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

    When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

    Randy Ruttger
    Thanks for the follow up.
    Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
    The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
    You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
    On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
    So the remedy to the problem that you presented in this thread could have been...
    1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
    2. Move to another version of Premiere Elements (which you did)
    I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
    Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
    Best wishes,
    ATR

  • How can I see the stored files in cache?

    How can I see the stored files in cache? I need them!
    Thanks for helping me.

    The History menu lets you revisit the page where you can drag any page element from it.
    How would you sort through thousands (tens of thousands) of files found in a cache?

  • How can I see the selected tags in the tag bar clearly

    How can I see the selected tags in the tag bar clearly (they used to be in black, now they do not change color; a highlight or Bold would help)

    The History menu lets you revisit the page where you can drag any page element from it.
    How would you sort through thousands (tens of thousands) of files found in a cache?

  • How to save the array elements

    hi,every body
    I need to save the array elements,for later use,can you tell me how?

    here you go.
    Message Edited by Root Canal on 10-21-2008 02:50 PM
    global variables make robots angry
    Attachments:
    write some stuff and read some stuff.vi ‏47 KB
    write some stuff and read some stuff.PNG ‏19 KB

Maybe you are looking for