I can't see the "Render work area"

Gentlemen !
I work with
Adobe CS4 AE fully updated
Ram 6GB
Footage 1920x1080 24fps
Windows 7 Ultimate
Well, if I am not mistaking , there was something called " Render work area" as well as " Render effect area"
Evertime I wanna sync a part of a song with the lip syncing , the audio is off a bit, but I remember there was a way to render just a part of the video before rendering the entire clip or there was a short cut such as space bar or enter, but seems like that don't work either , any help will be appreciated greatly thanks.

Hehehe,
It is a piece of software that you buy. The site has several plug ins that we find usefull, and with all the different types of Lip-synching out there (using phenomes with static mouths etc) this one just looks the most natural to me. It is also highly customizable and nice to work with.
Since it is midnight there, in a few hours time, the rest of the regulars will be up and about - I am sure they can shed some more light on the "Render work area" question you still have.
Good luck.
here is a link to a really good tutorial on using built in After Effects tools (no extra cost) I find this is perfect for cartoon type animation lip-synching. The reason Auto-lip synch is better for us, is that we want our characters to look more real and alive.
http://library.creativecow.net/articles/rabinowitz_aharon/lip_synch.php
Pierre

Similar Messages

Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?

giadad,
It sounds as this issue:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594
It has been described on this Adobe page:
http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/

Airport Utility can't see the airport, nor are shares visible (Why is there no very extensive 'cookbook' on troubleshooting Airport Extremes?)

For quite a while my MBP (10.5.8) cannot see the Airport Extreme 802.11n (AE) (2nd ed) anymore when I start Airport Utility (AU) (v5.5.3). My solution was to lower security settings of the MBP to 'accept all incoming connections', knowing that this was not a nice solution. Normally I had selected 'acces for specific services and programs' (the lowest option - my AE differs in language). In the past I denied access for requests that regularly came from mDNSresponder (etc), as I could not easily find out how necessary they were. I am not sure whether Bonjour is running; I try to stick to TCP/IP (without Netbios); the same might be the case with other obscure network services...
Then I added another network drive (WD Mybooklive) that works based on shares. The installation program worked fine, I was able to set up the drive for Timemachine backups and -in the proces of upgrading to Snow leopard (I always stay one OS version behind)- my MP3 collection could be read from another drive that was connected to the AE.
I am not sure what exactly lead to the loss, but now I can not see the shares anymore in the finder. Unless I select 'connect to server' (Cmd-K) and fill in afp://ip-adres. I had some trouble with the MBP-drive and Disk Utily could not fix it in multi-user mode. Applejack-auto in single user mode finished after some repairs (catalog file and catalog hierarchy errors), but I doubt that causes the trouble.
In all cases, internetting and accessing the connected drive was no problem.
The funny thing is, my Mac Mini (10.5.8) however can see the AE with Airport Utility (different version) fine. Somehow I get the idea that the networkstack of my MBP has been messed up, but I don't know what it should be, nor how I could check it, or how to repair the stack. But maybe it is not the stack at all.
Right now, I've just reset the AE by holding the reset button for about 10 s. The name has returned to 'Base Station xx', which is visible in AU, but when I click on another button ('manual configuration' or 'continue'), first the message "Are you sure you want to connect to another wireless network?". Finally no connection appears and the error 'AU cannot find your Airport' shows up (while the Base Station is visible in the left column) - or does not show up when I refuse to switch to another network.
So, who can help me to reconnect to the Airport Extreme and/or repair the network stack?

WDS is a difficult setup for many users because it is so easy to make a mistake (while swearing that you are not).
Apple's instructions for WDS are here:
http://support.apple.com/kb/HT4262
I still think the instructions provided by Tesserax are the best available:
http://discussions.apple.com/thread.jspa?threadID=2422028&tstart=0
I can't add any more to this other than to say that long ago when I used WDS, I would swear that I had all the MAC addresses entered correctly, etc and would still have problems. So, I ask my wife to watch me and she immediately catches something like I entered a "l" (letter L) instead of a number "1", or a "O" (letter O) instead of a "0" (number zero).
Finally, there's always the possibility of device that is not holding settings...a defective device.
Hopefully, Tesserax will have some additional thoughts.

Can i see the DC that are created under track

Hi
ihave created 3 DCs under a track but i did not check in now nwds is not working properly, if i reinstall my nwds can i see that those dc thats i have created under that track......
thanks
kishore

Hi,
Of course u can see the dc component after reinstall.
But u have to build the dc component again.
Just copy the Dc from the workspace to some other location and reinstall.
After this , copy the dc component and paste it in the Workspace .
go to the development infrastructure , here build all the Contained Dcs .
Right Click -->Local development > my Componenet>Build all Contained Dcs.
Thanks and regards
Fazal

Please tell where can i see the message that are delivered in the TransportServlet

My Trading partner is sending the messages to the TransportServlet and the from there end it says message is delivered .Please tell me where can i check the messages or do i need to setup something to save the messages .

Hi Dheeraj,
My Trading partner is trying to send the messages and it is being timedout .Thay are asking me to give the username and password for the URL .When i created the keystore i didn't add any username or password .How can i give the username and password to them .How to enable the authentication ?

How can I see the files that are attached to appointments in outlook

I store files in my appointments in Outlook on my work server that contain travel details, meeting agendas etc. I need to be able to access these on my ipad yet I can't find any way of making them come across to iCal.

You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.

How can i see the files that are suppose to eb backed up on my time capsule

I have a aple time capsule, which i think i was able to back up my imac on, but i cannot view these files, all i get when i go into the time capsle is liek a screen shot of finfer , i cannot find actual files like my music or pictures in the time capsule, any suggesions be fantastic, thankyou

You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns but I can cut and paste them so I know they are still there. Has this happened to others

The sheet I am working on has lost the ability for me to scroll to the first few columns. I can't see the columns A & B but if I cut and paste the table to a new sheet, the columns I am missing will travel to the new sheet. I have charts and other stuff related the the original table so I need to figure out why I can only see from column C forward. I tried to "UNHIDE" the columns but the function doesn't seem to recognise that there are columns missing. Has this happened to others and how did you fix it?

I've seen it happen before, or at least it sounds something like what I've seen before. The table somehow gets into the margins of the page and the app doesn't know how to deal with it. Go into Print View and try moving the table away from the left side ofthe page. You might have to change content size or resize the table to get it to correct (then put you can put them back the way you like).

When working in my photo album in iphoto my photos are replaced with a grey box and an !. I can't see the image on the page.

Lately when I am working in my photo album in iPhoto my images are replaced with a grey box and an ! . I can't see the images on the page. All my photos are high quality. What am I doing wrong?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?

How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?
When I drag the item off of the trifold that I am creating, it just disappears but I still want to use it. I just need to move it out of the way to modify other portions of the document.
thanks,
C

Add another page below the current one to use as a storage area. You can't use the grey area around the page for storing items you want to use later.
Go to the Pages Menu>Provide Pages Feedback if you would like to request this feature be added in future versions.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

apikoros wrote:
The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
1) I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access. But do I have to change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
Resetting the password you will need to do for each device... the utility cannot even see those old units.
So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
2) Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
N.Korean hackers.
[Edit] Whoops-- one more question: I want to partition the TC's disk, but Disk Utility doesn't see it. What do I need to do?
You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
Look at Q3 here.
http://pondini.org/TM/Time_Capsule.html
Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

Updated to 10.4.1 and can't see the menu titles or the song names, even though they are there and can be played. the other categories (tv, apps, etc) seem to be OK.

i just upgraded my pc to windows 7 and itunes to 10.4.1, but i can't see the menu items at the top left of itunes. they are there, because if i move my mouse over the area where they should be, i see and can select from the drop down menus. this problem also affects my music library; i cannot see the individual song names/artists/etc, but if i double click on the blank line it does play the song. the app library and video library seem OK, only the music library is a problem. also, when i connect my iphone, it recognizes it, but the main screen for my device has no words on it, just a picture of the phone.

Hi, Sanjiv - My son fixed this problem for me by showing me that in addition to the visible volume slider at the top left of the iTunes window you also need to pull down the blue airplay menu right alongside that volume slider (the little blue box with the triangle). When you pull down that menu you will see volume settings for "computer" which controls the built-in speakers, plus a list of the other external speakers you may have set up using Airport. When I did that I saw that the volume on "computer" was right down at zero levl even though the main iTunes slider was at full level. When I selected the "computer" under "single" or "multiple" options and adjusted the volume it came back up. It worked for me, I hope it solves your issue too. Best, John.

I can't see the animations on the website or access most of the options when I log in.Works perfect with Internet explorer though! Please help

I can't see the animations on this page (looks like a very small image) and when I log in can't access/see some of the options in the website . The page however works perfect with Internet explorer though! Please help identify the kind of plugin/add-on needed to make it work.

If you're using it in bright light, you may be getting sunlight through the back of the machine which can wash out the display. The Apple logo on the back of the lid is actually a cut-out that uses the systems back light to make it glow. Bright light (especially sunlight) can actually shine through the back. As the users in the login are typically in the middle of the display, this is the area most likely to be washed out as that is where the Apple logo is. You can try just putting your hand over the Apple logo on the back to block the sunlight when trying to log in.

I can't see the "Render work area"

Similar Messages

Maybe you are looking for