Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?
Hi, I have a problem with fonts because in the window I can't see the font, they are transparent. how can I fix this?
giadad,
It sounds as this issue:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594
It has been described on this Adobe page:
http://capitalmacservice.com/font-preview-working-illustrator-cs-5-yosemite-fix/
Similar Messages
-
Hi, I have installed a pci-gpib card in my computer, I have a problem with
installation, the message of troubleshooting wizard is as follow:
"One or more missing GPIB interfaces.
There are several reasons why you might encounter this problem:
Reason: Your GPIB interface is incorrectly installed.
Solution: Please verify that your GPIB interface is correctly installed
and rerun the NI-488.2 Troubleshooting Wizard.
Reason: You are using a non-Plug-and-Play interface (e.g., AT-GPIB/TNT,
GPIB-PCII/IIA, GPIB-ENET) and you did not use the Add New Hardware Wizard
to add the interface to your system properly.
Solution: Click th
e Add Hardware button and the Add GPIB Hardware wizard
will guide you through the process of adding GPIB hardware.
Reason: For the GPIB-USB and GPIB-1394, the host controller (USB or 1394)
must be working properly in order to use the GPIB interface.
Solution: Click on the System Details button for details about the USB and
1394 host controllers.
Reason: For the PCMCIA-GPIB and PCMCIA-GPIB+, the PCMCIA host controller
must be working properly in order to use the GPIB interface.
Solution: Use the Windows Device Manager to verify that your PCMCIA host
controller is functioning correctly. Start the control panel by selecting
"Start>>Settings>>Control Panel", open the System icon and select the
Device Manager page. If you select "View devices by type", you can look at
the PCMCIA socket properties to ensure it is correctly enabled."
And on system details the message is the next:
"USB Driver type: USB universal host controller"
"This version of windows does not su
pport IEEE 1394."
I am using Windows Me, so i want to know what i need to do to fix this
problems.
Best regards.If you have a PCI-GPIB card, you needn't worry about the USB port or whether or not Windows ME supports 1394. All you need in NI-488.2 version 1.70 from National Instruments. Install this driver and then insert your card. Windows should detect the card and find the proper driver.
If this did not happen in the proper sequence, look in the device manager and see if the card was installed as an "other device". If this happens, remove the card in the device manager and have windows redetect it. If this is not a solution, you may consider the ask an engineer page at www.ni.com/ask. Provide as many details as possible. -
These songs were fine when I originally bought them, they play on my computer, and even played on my old Iphone. I have deauthorized and authorised my computer serval times, but nothing seems to fix it. What do I do?
Like this:
-
i have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they are printed?
why can't you use the keyboard the way it is printed?
-
I have a problem with Safari in IOS 8 on my iPad 3. The bookmarks take up a third of the screen and I can't seem to make the bookmarks disappear until I need them. The useful part of the screen is therefore very small. Any suggestions gratefully appreciated.
OK, it now sort of works. A couple of problems here:
After updating IOS, Safari iCloud was "automatically" switched off
Switching it on had no effect
resetting my iPad automatically switched off safari iCloud again
after switching it back on, it said "turning off safari data"
switched it off and on again, now it said : "turning on safari data" and the sync worked
On IOS 7 no problems
The bookmarks not being displayed was because after pressing the book icon, it defaulted to showing the history and I had to press "Back" to get to the other options -
I have a problem.
I bought Pages and Numbers for my iMac and so far everything was OK.
Suddenly i have a problem with connection to iCloud.
Dokuments created on iMac in Pages or Numbers are not transfered to iCloud. Not uploaded to iCloud. There is a sign (small shape of iCloud), that they are waiting to be uploaded to iCloud.
I think the iCloud is OK.
i can see and manage documents in iCloud. i can create them on iPad and see them and delete them in iCloud.
But not on iMac.
i dont know what has happened and I am not abble to find the solution. It was OK till some days ago….I have a similar problem! Everything stopped working after upgrading to Mac OS 10.8.4 through the App Store. Help!
-
I have a problem with my iPhone 4s. An Apple rep looked at the phone tonight and determined I will need a new phone. I am now trying to back up my data to iTunes but I cannot get the phone to turn on. I have it plugged into my computer monitor but it just slowly flashes the Apple symbol. Any ideas on how I can get it to power up for the backup?
Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$
-
have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
The Apple icon, usually at top left corner, appears in top right corner in a strip including all that left hand. When the computer is restarted, the screen goes back to normal. But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode. My large flat screen is relatively new.
The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.That sounds like a Hardware problem.
You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation. -
I have a problem with my iPhone 4s. Location Services is turned on, but off in applications and I can not change it. It's just marked in gray. What should I do?
No - restrictions are not on...
and under privacy>location Services - just like before - I can´t change it here -
I have a problem with buying apps in itunes Store.
When you purchase the application fails payment.
Asked to update the map.
I have 2 credit cards with a positive balance.
In what could be the reason?contact itunes support
-
Hello
I have a problem with security questions and i cant reset to my email
The error was
Exceeded Maximum Attempts
We apologize, but we were unable to verify your account information with the answers you provided to our security questions.
You have made too many attempts to answer these questions. So, for security reasons, you will not be able to reset password for the next eight hours.
Click here for assistance.
i waited more than eight hours. and back to my account but it is the same ( no change ) i cant find forgot your answers
http://www.traidnt.net/vb/attachment...134863-333.jpg
can you help me pleaseAlternatives for Help Resetting Security Questions and Rescue Mail
1. Apple ID- All about Apple ID security questions.
2. Rescue email address and how to reset Apple ID security questions
3. Apple ID- Contacting Apple for help with Apple ID account security.
4. Fill out and submit this form. Select the topic, Account Security.
5. Call Apple Customer Service: Contacting Apple for support in your
country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID -
Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up alright, but the programs don't start when I press any buttons. How do I fix this problem?
If Layers is greyed out it possibly means that you are in Quick Mode. Select 'Expert' and all the options should become available.
Try permanently associating psd files with C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe and see if that fixes the issue. Instructions here - http://windows.microsoft.com/en-gb/windows-8/choose-programs-windows-uses-default.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
I have a 2008 vintage iMac with 2.8GHz processor and recently upgraded to OS X 10.9.5. Soon after theupgrade the mail system started switching the senders address to another address, but same user name. How do you fix this?
Thanks for the reply,. I went to the site provided and executed the directions but this did not solve the issue.
Even more details:
If I send a message to the Jane Doe address from another account on this machine (all my family uses the same email services provider and each have accounts set up on this machine), when you open it, it shows Jane Doe then the <applejax.xx> address AND the picture associated with the Apple Jax account.
So the problem shows up when the message is sent to this account from this machine, AND when it is sent from this machine from this account. No other accounts on the machine are effected.
I have sent and received email messages from the mail service provider's website, and everything is fine. -
I have set up folders on iCloud to file my mail but notice that some of the emails are missing when I've transferred them. Can anyone tell me where they are and how to get them back please?
This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
I cannot download Lightroom CC because it does not show up on my Creative Cloud Application Manager. How do I fix this?
I have Windows 8 and am currently using the entire Adobe Suite Package for my account.do you have a 64 bit os?
Maybe you are looking for
-
Error while excise invoice creation thru J1IJ
Dear All, Scenario: Stock transfer from Excise depo to other plant. Problem : Excise Invoice is not getting Generate in Transation J1IJ. i am getting following error "Excise invoice selection not complete for the item 000010" Also Please tell me the
-
Using SSL in SOAP Receiver Adapter
Hello, We need to execute a web service that requires using SSL connection. We have done following: 1. Deployed SAP Java Cryptographic Toolkit 2. Uploadted the Server certificates chain(Root, Intermediate, and the Server certficate itself) in Truste
-
Please help me cancel my subscription
-
No Relationship found to partner error..in Maintaining the ASN Number Ranges in SNC SC
Hello SNC Gurus, We are working on one of SNC implementation project. We have to implement three Scenarios 1. Purchase Order Processing 2. Release Processing 3. Supplier Managed Inventory. I have done the configuration part perfectly in SNC for the a
-
How to Blend Image Edges with a Gradient
Hi All I've created a transparent gradient over an image. The problem I am having is that the edges of the image are visible beneath the gradient. I know how to correct this in Photoshop but I am having difficulty in Illustrator. How can I create a s