I can't set up my Samsung external drive to burn CDs,, I can't set up my Samsung external drive to burn CDs,

I have a late 2006 MacBook, the cd drive doesn't burn anymore so I bought a Samsung external drive that is compatible for Mac, but I can't figure out how to get it going, I want to burn music CDs to it, help!

Hi, Well I can see that since your post Anthony Scully nobody has answered your question. All I can say is that I have the same problem (and thanks to you I will not try and call Moto support) and that it is now roughly 6 month since you posted and that with a brand new V3i the problem is still the same...

Similar Messages

How do I set MacBook to an external display when the plug and play doesn't recognize it? I am trying to set my Samsung 530 LCD as a monitor but HDMI and VGA cords (and the adaptor for them) doesn't seem to work.

I have tried everything I can find on line but they all claim that the plug and play works, and they don't for me. I tried the mini dvi to HDMI and a HDMI cord and that was not recognized no matter which unit I rebooted first. I found someone who said that my Macbook might be too old for the HDMI technology so I returned the cords and went to the VGA cord and adaptor.
I tried this first with the HDMI setup:
http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx= 167919&modelname=LN40C650L1F&modelcode=&session_id=NDhJrD0DQT0Z8KRsm62yhxJxqnyPy SKhlhpB8vQ6h9Q7R2BZJGzj!-1089109758!1761676444!7501!-1!434477884!1761676348!7501 !-1!1292098185857
Then I tried this with the VGA setup:
http://support-us.samsung.com/cyber/popup/iframe/pop_troubleshooting_fr.jsp?idx= 167901&modelname=LN40C650L1F&modelcode=&session_id=NDhJrD0DQT0Z8KRsm62yhxJxqnyPy SKhlhpB8vQ6h9Q7R2BZJGzj!-1089109758!1761676444!7501!-1!434477884!1761676348!7501 !-1!1292098185857
I contacted Samsung support and they said I needed to set the display settings to external display on the mac. I went to the display settings and moved the icon to my status bar. When I click on search for displays or whatever it says (I'm not at my Mac right now) it does nothing.
What am I missing?

I am using MAC OSx 10.5.8 (9L31a) as my operation system. The TV says "No signal. Check connected device's power, cable connection and source selection." Seems to me that that goes in hand with what the Samsung tech said about the Mac needing to be forces to use the external display. But how do I do that?

I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help!

I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help! Further info: I am a complete newbie to Mac. Had three macs prior to 2000 then four PCs. Just come back and struggling a bit with the unfamiliarity. On my old PC laptop I could simply switch from the laptop screen to the large external monitor (and back) with the F4 function key. While I can get the background image from my MBA to display, that's it. Until I noticed on the far left of the external monitor, the very edge of one of the web pages I was on. So Idragged it over to display in the centre. But that's all that's there. And now I have gone out of those web pages but they are still displaying on the monitor. There is some wierd disconnect. I'm sure it is just a setting thing. Will keep searching for answer but any advice welcome!

Your dsplay is getting extended onto the external monitor. Chcnage the setting to duplicate it or only display on the external monitor and you should be fine,
Let me know if this worked for you.

I just got a new laptop. How do I install iTunes and set it up so that I can still store my 80 gigs of music on my external hard drive?

I would also like to set it up so that if I unplug my external hard drive and take my laptop somewhere else, I can still have access to iTunes on said laptop. I realize that I wouldn't have access to the music that is on my external hd but I can still access the music that I have purchased from iTunes, right?

If your external drive has the right ports, you should be able to plug it up to your Mac and copy over your photos and wav files. You'll probably (I don't know this for sure as it's been a long, long time since I've dealt with wav files) need to convert the wav files to MP3 or some other format (but I would try opening them directly from iTunes, first - wait a second... yes, iTunes will open wav files).
There are only a fixed number of ways that Windows drive can be formatted and a Mac can read (though not necessarily write) them all. So you should have no trouble with that.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w? How can I get this set up to print?

After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless. Any help on how to setup or reconfigure would be apprecaited.
I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc. Have gone through all the standard fixes, reboot, reset , reload driver, etc.

From the link to the Thread you provided, I worked through the one message procedures that were listed.
For ease of reference, I have copied them and printed them below. This was an old thread but the guidance still works with no firmware upgrade required.
I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc. I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer.
I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection. Apple needs to be talking to Samsung to get the USB issue resolved. I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
Here is the steps I followed to get my ML2525w to work in the wireless mode. Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly.
As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB). From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job. 1st page sometimes printing but all the rest of the pages were garbage. No printing at all. Printer just running a bunch of blank pages out. etc.
I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
"I've just installed one of these printers for my parents.
First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
This is what I did:
(1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
http://www.samsung.com/us/support/downloads/ML-2525W
Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
(2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
(3) Restart your Mac.
(4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
(5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
(6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
(7) The Wireless Setting application will then tell you to disconnect the USB cable.
(8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
(9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
(10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
MacBook (white 12"), Mac OS X (10.6.5)

Can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition?

can i use an external hard drive in windows to add additional storage after my initial partition is set up. i want to add a 500 GB external hard drive to use with my windows. I set windows up in boot camp with a 50 GB partition? I now want to add another 500 GB?

Yes. Windows supports external USB drives.

Can I set up my Macbook Pro to boot to Win 7 from an external drive?

Rather than partition my internal drive for having to work with Windows & Office 2010 (specifically Access 2010) can I set up my macbook pro to boot to Win 7 from an external drive?

No, not with Boot Camp. I've never even tried it with a VM (which I use) - I keep all the data on my internal drive. I'm not saying that it couldn't be done with a VM, I've just never tried it.
Clinton

How can I set connection to external XML file with Dreamweaver to buiild AIR app?

Hello,
I try to do simple AIR app in dreamweaver. It's not problem
to use static data. But I'd like to use dynamic data from external
XML file. I try to use Spry and evrything works fine in web browser
but i have problem with loading external XML data into my app in
AIR. Can I simply transform my spry based html app into AIR?
What should I add to do this?
Pawel

Daniel Lichtenwald wrote:
What are the requirements and steps for arranging to receive this large file using File Transfer Protocol (FTP)?
Usually, we don't speak of "receive" when using FTP, since the file is transferred from server to client, so it's more of a case of "download".
At your end, it's simple. You use an FTP client; under SL, that includes Finder and Safari, so you don't even need to get any additional software.
At the other end, it's more complicated; the 'sender' must set up an FTP server on his machine.
Alternatively, you can set up your own Mac as an FTP server, and have the 'sender' connect to you with an FTP client and upload the file; but, if your Mac lives behind a router, then you have more work to do with the router settings.
That's why it's much easier to use the file sharing services mentioned above -- if they are available in both sender's and receiver's locations. (Keep in mind that some countries block access to all those mentioned -- except perhaps <www.transfer.ro>, of which I know absolutely nothing.)

HT201250 I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/

How can I set up an external harddrive with time machine that already has data on it without losing the data?

I have an external hard drive that I use to hold photos and other files on that no longer fit on my macbook. I also use the external hard drive for back ups set up with time machine. I don't believe I ever did anything to partition it, I've just always had separate folders (Photos, Music, etc) with one being called "Back Ups" (or Backups.backupdb) that my time machine back ups would automatically go into. Recently, I made the switch from my HDD in my macbook to a new SSD of the same size. I used the back ups on the external hard drive to restore all my content, which all worked out fine. My problem now is in using my external hard drive. When I plug it in, it no longer seems to be working with time machine. Also, I was organizing some files within the external hard drive, and when I dragged one into a folder, it took a while to load. Before, it was instantaneous moving a file already on the external hard drive to another location within it. Can anyone help me in getting the external hard drive to work with my new SSD? I don't want to delete any of the folders or back ups that are already on it, since that's the only place I have some of those files. Please let me know if you need anymore details. Thanks! (sorry if this is posted in the wrong forum)

First, she has to be logged in to the same iTunes account as she used on the old computer.
Second, when she plugs the iPhone in to iTunes, right click on the phone name and select transfer purchases.
Third, enter one contact and one calendar entry into the new computer's addressbook/calendar.
After that, she should be fine.

How can I set up my TC as an external hard drive only?

How can I set up my TC as an external hard drive for my iMac and my MacBook?
I baught it for the extra space but don't know how to use it. I just keeps on wanting to back up files.
Help me please.

Hi,
Thank you for great advice re SuperDuper.
You wasnt to know we didnt live in USA. We will try to get the full retail version of Leopard off the net. We will also phone round the apple resellers.
In the meantime, we are happy running Tiger with the knowledge that SuperDuper has cloned our hard drive in case of a disaster.
SuperDuper recommended backing up the hard drive with a new user account if we were using filevault on the master account. We backed up our hard drive without creating a new user with filevault as we could not read the pdf `Instuctions as preview was not responding.
Is this copy safe to use as a bootable drive or should we copy our entire HD again using a new user account without filevault?
Keith & Shem

Setting Up an External HD so that It Can Be Accessed Wirelessly From My Mac

I have a 6 month old MacBook Pro running Leopard 10.5.2, an external Maxtor 500 GB HD formatted for "MAC OS Extended (Journaled)" I am using for mainly for my iPhoto Library and a Western Digital My Studio 1 TB drive formatted for "Mac OS Extended (Journaled)" I am using as a backup for Time Machine. Currently Time Machine is backing up both my MBP HD and the Maxtor drive to the WD drive. Right now both of the external HDs are connected directly to my MBP via USB 2.0 and Firewire 800 respectively.
My goal is to find someway to connect these drives to my wireless network, whereby I can take my MBP and be in any room in the house and access those two drives, either for iPhoto purposes or to run my backups with Time Machine
Since neither of these drives has an ethernet connection I need to use some sort of an adapter that would enable me to connect both of the drives via USB (or Firewire) to that adapter and then have that adapter connect into one of the ethernet ports on the back of my wireless router.
My thinking is that I don't have to setup a NAS environment whereby according to Wikipedia a NAS is...
"... a self-contained computer connected to a network, with the sole purpose of supplying file-based data storage services to other devices on the network. The operating system and other software on the NAS unit provide the functionality of data storage, file systems, and access to files, and the management of these functionalities. The unit is not designed to carry out general-purpose computing tasks, although it may technically be possible to run other software on it. NAS units usually do not have a keyboard or display, and are controlled and configured over the network, often by connecting a browser program to their network address."
I was hoping that there was another way of doing this. I came across this idea but wasn't sure if it would work because primarily it doesn't state it supports the MAC O/S...
http://www.belkin.com/networkusbhub/
I have a question out to Belkin to verify if indeed it does or does not support Tiger and/or Leopard. I'll update this post once I know more.
Anyone have any ideas what I can do and/or product recommendations?
Thanks in advance.

Why do I have to use an Airport Extreme Base Station? Why can't I use my legacy equipment which is a Netgear 4 Port 802.11g Wireless Router and plug a USB ( or preferably Firewire 800) Hub into one of the open ports on this router and then connect my external HD to the hub? Wouldn't that solve my issue. I know my speed might be slow, but would it really not be worth it to do it this way?
What am I gaining by going to the Airport Extreme other than 802.11n technology. I have two external HD's I would need to connect. One is Firewire 400/USB 2.0 and the other is Firewire 800/400 and USB 2.0. I also would want to run Time Machine in conjunction with one of these HD's.
There's got to be a less expensive solution than buying the Airport Extreme Base Station and/or setting up a NAS.

Yesterday I changed my email password on my home computer. Today, I can't get any new emails on my Samsung Galaxy 4; I deleted the email account entirely and tried to set it up again as a new account, using the new password, but it keeps giving me an err

Yesterday I changed my email password on my home computer. Today, I can't get any new emails on my Samsung Galaxy 4; I deleted the email account entirely and tried to set it up again as a new account, using the new password, but it keeps giving me an error message that reads: Cannot safely connect to server. The new password is working on my home computer. I even tried the old password; it just gave me the same error message.

I'm sorry you're having issues with your e-mail account on your phone Rusty1112. Let's figure out what's going on. First, please try deleting account/information again and then restart phone. When phone is back on, try adding e-mail account again, and be sure you're entering exactly as you set up, meaning its case-sensitive. If you're still getting same error, please let us know and let us know what e-mail account it is, Yahoo, AOL, MSN, etc.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

Can I set an alarm when external drive powers off?

I must be one of the few people who have no trouble at all with TM! I use it to back up about 1TB of photos (I am a semi-pro photographer) to two different drives - keeping one offsite at the office and rotating them regularly.
However - my external drive is hidden at home when connected. When we have a power outage (all too often here in MA) then the drive powers off and does not power on again (I am using MacAlly enclosures - have tried several, these are the most reliable to date).
Given that TM works so well, I never think to check if it has backed up so if the power has cycled I don't notice that TM has not run. Is there any way to set an alert (dialog box popup, auto email etc) to tell me when TM cannot access the drive as it is powered off. Is this buried in Leopard, or does anyone know of a 3rd party app?
Thanks

I could not agree more with Kappy.
I would never plug either my Mac or my external into anything but a UPS. They've gotten much less expensive lately, and even a fairly small one ($100 to $130 or so) will run my Mac and external for an hour or so.
But you don't necessarily need even that much; just enough for your Mac to power itself down in an orderly manner.
If you have a power failure to either your Mac or external disk, it can corrupt your data. I'd recommend using Disk Utility (in your Applications/Utilities folder) to do a +Repair Disk+ (not permissions) on your external, and a +Verify Disk+ (not permissions) on your internal. If the internal shows errors, you'll have to use the copy of DU on your Leopard Install disc to fix them. Post back if you need to do this but don't know how.

CS5 Playback Settings grayed out and no longer can set playback on external monitor.

I like to view my projects while editing on an external monitor but the Playback Settings are grayed out. I've done all my prior projects with external monitor display enabled with no problems and can go back to a prior projects completed and view them using an external playback monitor. For some reason, the Playback Settings on my latest project are grayed out and I'm not able to set Desktop Video Display During Playback.
The last project worked on was about 3 months ago. Last week, I started working on two new projects and noticed that I wasn't able to set playback to my external monitor. All my devices are hooked up and I can review older projects on the external monitor but can't set two new projects to use display on the external monitor.
Anyone have any ideas?
Problem solved. My fault.
The Sequence Preset Settings selected must support the device the external monitor is connected to. In my case, IEEE 1394 firewire. I corrected the new project to the correct Sequence Settings and can now view playback on the external monitor.

http://www.blackmagicdesign.com/press/pressdetails?releaseID=42319
"The Desktop Video 9.7.5 software update allows users to take advantage of many new features in the Adobe Creative Cloud desktop applications such as powerful new editing timelines and shortcuts and audio mixing with Adobe Premiere Pro® CC and new creative and visual effects tools with Adobe After Effects® CC."
So everything should be covered on that front. And as I listed, I was getting playback out of AE CC, so I feel it is solely an issue in Premiere. That was worth checking out though since CC is so new. Thanks for replying.

I can't set up my Samsung external drive to burn CDs,, I can't set up my Samsung external drive to burn CDs,

Similar Messages

Maybe you are looking for