I Can't stop my movie clip from looping
This is probably an easy fix, but I obviously can't get it. Below is the actionscript to loop my movie clip, but once it's activated, I can't get it to stop. I thought it would stop at 3. What did I miss??
Any help? Flash 8 (CS2).
on (rollOver){
for (i=0; i<=3; ++i){
audio_mov.duplicateMovieClip("audio_mov" +ii);
remove the stop() from the first frame of blur and assign your button an instance name (eg, btn). then see if this does what you want:
blur.stop();
var tl:MovieClip=this;
btn.onRollOver=function(){
blur.play();
btn.onRollOut=function(){
tl.onEnterFrame=function(){
if(blur._currentframe==1){
blur.stop();
delete this.onEnterFrame;
Similar Messages
-
How do I stop a movie clip from looping
I am using Action Script 3 and the 'stop()' function is not working to stop my movie clips from looping continuously.
I have added the 'stop()' function to the last frame on the timeline of each movie clip.
I originally built the .fla file in Flash CS6 using Action Script 2 where it was working with no problems (I have since upgraded and don't have access to CS6 anymore).
I have all the separate movie clips positioned on Frame 1 of my main stage with the following script to start them playing:
Cigarette_Reveal.play();
KickTheHabit.play();
BallMove.play();
BallFlip.play();
Offer.play();
I want each of these movie clips to stop playing after one animation sequence is complete.
Please help!Turn on strict mode in your publish settings. This will allow you to see the compiler errors that are preventing the actionscript in your fla from compiling correctly.
-
How can I display a Movie clip from library on stage in AS3?
Hi,
I have a movie clip in my library and I would like to display it on the stage using AS3.
do I have to define it as a variable?Do I need to use this code: addchild(movieclip);
can I use the 'x' and 'y' to position it?
What would the code look like?
Ben.Great! it works well ! thanks
But I have another question, if I wanted to used the same movie clip but postion it at different x and y positions when a different btn is selected how could I do that?
Would I have to make a copy of the movie clip and give it a different name?
or is there an better way around it?
Ben. -
Stopping a Movie Clip from continuing to Play
Hi
Apologies if this has already been asked. I have two movie
clips in my FLA. The main timeline consists of 250 frames with a
stop action to end the movie on the last frame. I've noticed that
my two MCs continue playing after the main movie has stopped and am
looking for help in stopping these when the main movie stops.
I am using Flash CS3. Any help much appreciated.
GeorgeHi Cbeech
That worked a treat - I was getting bogged down with more
complex AS - it should have been obvious it was a simple stop
action.
Once again, many thanks for that.
George -
How can i transfer/import movie clips from iMovie Events back to iPhoto Library?
hi, my camcorder only records AVCHD format and so i have to import the camcorder videos into iMovie as an iMovie Event.
i'd like to keep both photos and movies managed under iPhoto library instead.
can someone please please help me how i can transfer the movies imported into iMovie, BACK TO iPHOTO?
thank you!Process the Movie in iMovie then export it as a mov file to the finder and then import to iphoto.
Regards
TD -
How can I stop the play command from looping?
Hi
When I play my sequence the play head loops back to the start point. In my keyboard layout I have play in my space button (and not the the loop button)
Any ideas?
Thanksctrl+L toggles loop playback on/off
-
Preventing a movie clip from resizing
Hello:
How can I prevent a movie clip from resizing while continuing
to allow the main movie to resize.
If this is impossible to do, knowing that would also be
helpful information.
Thank you in advance for any assistance offered,
MyMorgaineMake an Album of the Photos and Videos and put them in the order you want. Then make a slideshow of that album.
Regards
TD -
I am trying to move across & view my home movie clips from my old PC to my new Mac but I am unsure what software I need to view them. They are from a Canon video camera originally. Please advise how this is done!
Do they have a file extension?
How about anything on the camera which might indicate what it is, like AVCHD? -
How can i let a move clip complete his motion tween movement after dragging and dropping it
hi how can i let a move clip complete his motion tween movement after dragging and dropping it
i am using this code and there is a motion tween applies to the movie clip r_mc
r_mc.addEventListener(MouseEvent.MOUSE_DOWN,fun); r_mc.addEventListener(MouseEvent.MOUSE_UP,fun2); function fun(event:MouseEvent):void { stop(); r_mc.startDrag();
function fun2(event:MouseEvent):void {
play(); r_mc.stopDrag();i have a simple .fla file wich contains MC that has
a motion tween(its moving from the left to the right of the stage)
this motion tween covers the whole time line ( there is only 50 frames in the time line)
i mean in the frame 1 the MC appears in the left of the stage
and in the frame 50 the MC appears in the right of the stage and there is a motion tween between them
every thing till now working well
i want to make that MC dragabble
so when i drag the MC i will use stop()
and when i drop it i will use play()
but the problem is that the mc doesnt move and complete
his motion tween movement when i drop it
for example the MC will be in the middle of the stage in frame 25
in this frame (25) i am draging the MC ,stoping the timeline,dropping the MC and resum playing the timeline again
but the MC freezes in the middle of the stage and doesnt go to the right of the stageo until the flash loops and start from the frame 1 again
here is the example wich i am worikng on
http://www.mediafire.com/?ia47r4owha7sz8v
thank u very much and sorry for my bad English -
Accessing movie clip from flash swf file
I have the situation where in flash i created a simple
animated movie clip with few stop() commands on timeline. Movie
clip consists of simple animatio played on roll over and on roll
out which is controlled using actionscript. I loaded movie clip
into flash using [embed] tag but actionscript code is stripped,
there is no stop() action so movie clip loops continously. I guess
that's normal behaviour for embedded flash swf files but i would
like to know is there a way to still achieve that? Can i load swf
some other way with its actionscript and then control movie clip
from flex?You need the FLA's to open in Flash.
You could download the free trial of a flash decompiler
(www.sothink.com). The free trial won't give you actionscript, but
it will give you all of the art in the swf. -
Trouble Copying and pasting a movie clip from another flash scene
Hello,
I have been trying to copy a movie clip from the library of one flash and paste it into the library of another. But when I do this, it always gives me, "One or more library items already exist in the document.
I have tried finding and renaming those items, renaming the existing movie clip, and even changing it into a graphic instead. Still it always replaces these certain movie clips in my main flash file.
I even tried the following:
Creating a new movie clip in the new file. Then going into the movie clip of the other file I wish to copy over, and trying to copy its frames and put it into the new movie clip i created in the main file. Even then, it says I'm replacing library items!
Can someone help me?
ThanksThe easiest way to be sure you are renaming everything is to probably to copy the movieclip into a new empty file's library and then rename each symbol in there. Unless I am missing something, when you do that, each isolatable symbol inside that movieclip will appear as a separate symbol in the library, making it easier to be sure you have renamed them all.
-
Loading Movie Clip from a button
Hi,
How do I load a movie clip from a button? So far on my button
(b1), I have this AS: and I want the button to load the movie clip
"char1." My button already has some AS:
b2.onRollOver = function() {
_root.captionFN(true, "Hi!", this);
this.onRollOut = function() {
captionFN(false);
How would I go about adding more script to load a movie clip
to my button b2?
ThanksHey - Unfortunately I'm going to be in meetings for most of
the day, so
it'll take me a while before I can go through this in any
detail. One thing
that struck me though is that your two functions (captionFN
and
hoverCaption) are in the main1_mc not on the main timeline.
Then the
buttons are calling _root.captionFN(); which refers to the
main timeline.
I would expect that they should be calling
_root.main1_mc.captionFN(),
because that is the path to where the function is. Does that
make any
sense?
One thing that I do when I'm writing code is to always keep
all functions on
the main timeline. That way you are sure that they are being
registered
(i.e. if you call a function before the playhead reaches
where that function
is written, the function won't work. If the function is in
the first frame
of the main timeline, you know that the playhead has reached
it). What you
might want to do is to move all your functions to the very
first frame of
your movie. Then you can call them with the path:
_root.myFunction() and
you are sure that they will be found.
Maybe give that a try and let me know if it helps. In the
meantime, I'll
try to go through your code, but like I said, today's a bit
of a gong show
for me.
Sorry - I don't mean to just sluff you off or anything.
Cheers,
Brock
"respondplease" <[email protected]> wrote in
message
news:[email protected]...
> Hi Brock,
>
> Thanks again, your sample file really helps but I'm
still having problems.
> What it boils down to is that my buttons don't fully
function properly. It
> works correctly sometimes, but not consistently enough.
So if I fast
> forward
> too much or rewind and then FF, the buttons aren't
either isn't clickable
> or
> the hover text and caption box doesn't show up, etc.
This usually happens
> when
> I press FF too many times or too fast. But regardless of
how many times I
> press
> FF I would like my buttons to work
>
> Your sample file is very useful but unlike mine I have
perhaps too many
> MC's
> w/in MC's, etc. I will try to clarify my setup in hopes
of finding a
> (better)
> solution to my problems. My main timeline has my "prev",
"next", and
> "pause"
> buttons which also has the actionscript for my NEXT
BUTTON, PREV BUTTONS.
> And
> now I've added your SHOW BUTTONs function as well. I've
minorly modified
> your
> showButtons function adding a couple of more lines and
actually deleting
> the
> _root because I found that it doesn't work sometimes.
Anyhoo, here it my
> entire
> code in one frame on my main timeline:
>
> // ===== NEXT BUTTON ===== \\
> next.onPress = function() {
> _root.screen.showButtons();
> _root.createEmptyMovieClip("controller_mc", 1);
> controller_mc.onEnterFrame = function() {
> _root.screen.gotoAndPlay(_root.screen._currentframe+10);
> if
(_root.screen._currentframe+10>_root.screen._totalframes) {
> _root.screen.gotoAndStop(_root.screen._totalframes);
> }
> };
> };
> next.onRelease = function() {
> controller_mc.removeMovieClip();
> _root.screen.showButtons();
> };
> next.onReleaseOutside = function() {
> controller_mc.removeMovieClip();
> _root.screen.showButtons();
> };
>
> // ===== REWIND BUTTON ===== \\
> prev.onPress = function() {
> _root.createEmptyMovieClip("controller_mc", 1);
> controller_mc.onEnterFrame = function() {
> _root.screen.gotoAndStop(_root.screen._currentframe-10);
> if (_root.screen._currentframe-10<1) {
> _root.gotoAndStop("screen");
> }
> };
> };
> prev.onRelease = function() {
> controller_mc.removeMovieClip();
> };
> prev.onReleaseOutside = function() {
> controller_mc.removeMovieClip();
> };
> // ===== SHOW BUTTONS ===== \\
> function showButtons() {
> for (i=1; i<=6; i++) {
> _root["b"+i]._visible = true;
> _root["char"+i].removeMovieClip();
> chars._visible = true;
> cap.desc._visible = true;
> cap._visible = true;
> }
> }
> Still from my main timeline, my main1_mc is called from
the frame labeled
> "screen." My main1_mc has the b1 - b6 buttons which has
the HOVER CAPTIONS
> and
> HIDE BUTTONS FUNCTION coding. And each button calls each
movie clip ie.
> char1_mc, char2_mc, etc. Here's all my code on one frame
(in my main1_mc):
> // ===== HOVER CAPTIONS =====
> b1.onRollOver = function() {
> _root.captionFN(true, "pick me!", this);
> //display the function (true) or to hide the function
(false)
> this.onRollOut = function() {
> captionFN(false);
> };
> this.onRelease = function() {
> hideButtons();
> _root.attachMovie("char1_mc", "char1",
_root.getNextHighestDepth(),
> {_x:595,
> _y:345}); //this attaches movie to the _root timeline,
and renames it to
> "char1".
>
> _root.char1.swapDepths(_root.cursor_mc);
> //swaps the depth that the cursor is on and the new
movieClip is on. So
> the
> cursor will stay on top.
> };
> };
> b2.onRollOver = function() {
> _root.captionFN(true, "Hi!", this);
> this.onRollOut = function() {
> captionFN(false);
> };
> this.onRelease = function() {
> hideButtons();
> _root.attachMovie("char2_mc", "char2",
_root.getNextHighestDepth(),
> {_x:605,
> _y:345});
> };
> };
> b3.onRollOver = function() {
> _root.captionFN(true, "Get Jac'd Up!", this);
> this.onRollOut = function() {
> captionFN(false);
> };
> this.onRelease = function() {
> hideButtons();
> _root.attachMovie("char3_mc", "char3",
_root.getNextHighestDepth(),
> {_x:605,
> _y:345});
> };
> };
> b4.onRollOver = function() {
> _root.captionFN(true, "Boo!", this);
> this.onRollOut = function() {
> captionFN(false);
> };
> this.onRelease = function() {
> hideButtons();
> _root.attachMovie("char4_mc", "char4",
_root.getNextHighestDepth(),
> {_x:605,
> _y:345});
> };
> };
> b5.onRollOver = function() {
> _root.captionFN(true, "I'll be your guide", this);
> this.onRollOut = function() {
> captionFN(false);
> };
> this.onRelease = function() {
> hideButtons();
> _root.attachMovie("char5_mc", "char5",
_root.getNextHighestDepth(),
> {_x:605,
> _y:345});
> };
> };
> b6.onRollOver = function() {
> _root.captionFN(true, "Welcome!", this);
> this.onRollOut = function() {
> captionFN(false);
> };
> this.onRelease = function() {
> hideButtons();
> _root.attachMovie("char6_mc", "char6",
_root.getNextHighestDepth(),
> {_x:605,
> _y:345});
> };
> };
> _root.captionFN = function(showCaption, captionText,
bName) {
> if (showCaption) {
> createEmptyMovieClip("hoverCaption",
this.getNextHighestDepth());
> cap.desc.text = captionText;
> // cap._width = 7*cap.desc.text.length;
> cap._alpha = 75;
> if ((bName._width+bName._x+cap._width)>Stage.width) {
> xo = -2-cap._width;
> yo = -17;
> } else {
> xo = 2;
> yo = -17;
> }
> hoverCaption.onEnterFrame = function() {
> cap._x = _xmouse+xo;
> cap._y = _ymouse+yo;
> cap._visible = true;
> };
> } else {
> delete hoverCaption.onEnterFrame;
> cap._visible = false;
> }
> };
> // ===== END OF HOVER CAPTION ===== \\
>
> // ===== HIDE BUTTONS FUNCTION ===== \\
> function hideButtons() {
> for (i=1; i<=6; i++) {
> this["b"+i]._visible = false;
> }
> chars._visible = false;
> cap.desc._visible = false;
> }
> Sorry for copying and pasting all my code - I know it
must be annoying,
> but I
> can't seem to find what's wrong. Again, ANY help would
be greatly
> appreciated.
> Thanks for your patience. Your talent is very much
appreciated and I'm
> very
> grateful for all your help.
>
> Kindest regards
> -
Importing movie clips from internet
I am trying to import some movie clips from the internet. Any suggestions? I tried saving on MAC HD and adding to iSquint, but when I import into iMovie, there isn't anything there. I have the same problem when I try to import clips from a movie (not video, a real movie) I have saved in iTunes. Any suggestions there?
Try this great free, open source software.
You can get it from the site or from Apple downloads.
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
Run MPEG Streaqmclip.
Click File > Open URL.
Copy/Paste the URL of the video into the box.
Click on File > Export to QuickTime.
Use 'Apple Intermediate Codec'.
Convert the movie and save to a folder on your desktop.
Open iMovie and click File > Import Movies...
Navigate to the folder.
Create a new event, name it and import. -
ESS EP4 Stop automatic move up from Waitlist when Learner Cancels on ESS
Dear Gurus,
Hope you can help in finding a solution:
to stop an automatic move up of a learner on waiting-list when another Learner Cancels Classroom Participation on ESS.
On our IMG: Training and Event Management -> Sap Learning Solution -> Training Management ->
-> Day-to-Day Activities -> Participation Cancellation -> Control Options
the config is set to value SEMIN u2013 ToPMD = u201CIu201D., which means "Interactive. User Selects."
In the BackEnd, the system behaves as expected, which is - Upon Participantu2019s cancellation by an Administrator, the Administrator gets an interactive choice of whom on Waitlist to move up to the Classroom Course.
However, when a Learner Cancels classroom course on ESS, a person from Waitlist is moved up automatically. This is not what we expect and this has changed after EP4 upgrade.
Prior to EP4 upgrade a Learneru2019s cancellation on ESS (approved by Learneru2019s manager) would result in Displaying on u201CDynamic Course Menuu201D or u201CDynamic Participation Menuu201D transaction:
- An Available spot plus unchanged number on Waitlist. Thus, the Administrator had a chance to move a participant of the highest priority.
Since the Administrator must consider various priorities upon making decision who should move up to the available spot, it is important for us not to fill it up automatically.
Is it a bug, or for ESS, may be there is a separate IMG control to keep behavior as it was prior to EP4 implementation?
I appreciate your help,
Thanks and regards,
GraceFeb 14, 2012.
Dear Siddarath,
In SE16 I can see T77S0- HRLSO = space.
Where can I add the parameter HRLSO NMOVE in table T77S0? I do not see it on my IMG.
I already have:
1. IMG config UPON COURSE Cancellation
IMG: Training and Event Management -> Sap Learning Solution -> Training Management ->
-> Recurring Activities -> Firmly Bookin/ Cancellation -> Control Options
SEMIN-FIXRV = 1 (Switch ON). (Conversion of Unplaced Candidates to Prebookings).
I think this works well.
2. IMG config UPON PARTICIPANT Cancellation
IMG: Training and Event Management -> Sap Learning Solution -> Training Management ->
-> Day-to-Day Activities -> Participation Cancellation -> Control Options
I can control here T77S0 parameters:
PPREL u2013 STORA = A040, ( Was cancelled by)
SEMIN-CCDEL = 0 , ( Default Value for Cancellations Fee)
SEMIN-TOPMD = I. (Interactive User Selects).
This one works well in the SAP Backend, but not on Portal ESS.
My issue is that, when Administrator Cancels a participant, there is now automatic move-up from waiting-list. The administrator can CHOOSE, whom to move up from waiting-list.
However, when a Learner Cancels participation HIMSELF on ESS portal, then any person is automatically moved up from waiting-list WITHOUT giving a chance to Administrator to choose who should me moved up. This worked OK in EP600, but does not in EP604.
Thanks again,
Grace -
Dragging movie clip from Event pane to Project pane
When I drag a movie clip from Event to Project the top part of the clip is cut off. On body pictures I am losing people's heads! The movie clips play perfectly in the Event panel, so I know they were imported correctly.
There are two things to look at.
First, what is the aspect ratio of your project, and is it the same as your camera is shooting?
If your camera is standard (4:3), set your project to 4:3. If your camera is wide-screen (16:9), set your project to 16:9. You can do this in FILE/PROJECT PROPERTIES.
Second, if your project contains a mix of 16:9 and 4:3, that is OK. You just pick the aspect ratio that you prefer. Then on each clip, go into the Rotate, Crop, Ken Burns Tool and select FIT or CROP.
FIT will letterbox (black bars). CROP will cut off the top and bottom. You can decide which you prefer.
Maybe you are looking for
-
How do I select a cell in a multicolum​n list box and use scroll horizontal on th
From an event structure, how do I select a cell in a multicolumn list box and use scroll horizontal on the front panel at the same time. I can select a cell from the multicolumn in an event structure, but I cannot move the scroll bar on the front pa
-
Limitation of sender file adapter
Hi Gurus, I am working on a file to proxy scenario.Data is coming from MDM and goes to BW through PI. The question is approx. 1,70000 records will be passing from MDM through PI to BW. Is my File adapter is well versed to handle the said quant
-
I need a Windows 8 HP Deskjet 400 Driver
I cannot find a Window 8 HP DeskJet 400 Driver anywhere. Could you please provide one! I used the HP Driver Selection Program and it picked the Wrong Printer. Your help would be greatly appreciated. Paulo [Moderator edited personal information]
-
Approval Procedure for Specific Business Partner
Dear Experts, Good day! Is it possible that a certain approval procedure for credit memo will trigger only once a specific business partner is used? Thanks! Ashley
-
I urgently need my problem solved, I have customers yelling because I can not do what they ask, and canceling a software with such little technical attention?, authenticate and buy something that again and again, I've tried all the solutions posteada