I can't upgrade from IOS 6.0.1 to IOS 7.1.1. iPad says it has downloaded IOS 7.0.3 but cannot verify the installation. Cannot restore or update in iTunes either. Help please?

I can't upgrade from IOS 6.0.1 to IOS 7.1.1 on my iPad 2. iPad says it has downloaded IOS 7.0.3 but cannot verify the installation if I try and install it. It claims that I have lost internet connection, which I have not. I cannot restore or update the iPad in iTunes either, if I try to, I get an error message which says that I 'do not have permission to access the requested resource'. I am using the latest version of iTunes on Windows 8. I have tried putting the iPad in recovery mode and restoring it with iTunes, the result is the same.
Any help would be much appreciated.
Thanks!

@Rudegar
Thanks for the reply, but I've been having this problem for well over a week. If it is a corrupt download, is there some way of deleting it from the iPad and getting a new one?
Thanks

Similar Messages

  • HT201269 i am trying to get my contacts from an old iphone 3s to a 5c and i am not getting the new phone to stay connected to itunes. some help please on what to do!

    i am trying to get my contacts from an old iphone 3s to a new 5c and i am not getting the new phone to stay connedted to itunes. some help please on  this problem!!!

    One way is to Drag and Drop the  Entire iTunes Folder  from your Old Computer to an External Hard Drive...
    Then Drag and Drop the  Entire iTunes Folder to the location of your Music on the New Computer...
    These Links may Help...
    Backup iTunes to an External Drive
    http://support.apple.com/kb/HT1751
    Moving iTunes Media Folder
    http://support.apple.com/kb/HT1364
    Cheers

  • Re Mac Mail, I used to be able to leave a mail, go to inbox and go back to mail to continue composing. Now I cannot leave the mail within Mac Mail without closing it. Help please

    re Mac Mail, I used to be able to leave a mail, go to inbox and go back to mail to continue composing. Now I cannot leave the mail within Mac Mail without closing it. Help please

    Perhaps this series of posts in another thread may haelp you.  I don't have Mavericks but I guess there is a drafts folder available.
    https://discussions.apple.com/search.jspa?facet=content&type=discussion&sort=rel evanceDesc&showAnsweredFirst=true&q=Mail%20drafts%20in%20Mavericks

  • Windows 7 64 Bit system will not update to iTunes 7 - Help please!

    Hello -
    I've been trying to update my iTunes since July and have been unable to do so. I think the last time I installed a version of iTunes was in May. I've tried everything and anything I could find on the web but nothing works!
    I have a Windows 7 PC 64 bit laptop.
    Everytime I try to update I get the error message "the installer encountered errors before the installation could be completed".
    I've already tried:
    - Downloading directly from apple site
    - Downloading the update only then installing
    - Made a new user account on my computer to try install
    - Uninstalled everything and started fresh
    - Disk Clean up's
    - Turned off Anti-Virus
    - Restarting computer and more...
    Does anybody have any suggestions!? It's driving me crazy not being able to sync my iphone 4! I'm starting to think it's just not compatable...
    PS - I am able to install older version of iTunes, but my iphone 4 is not compatable since i've upgraded to iOS6

    Hi rrfhp,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand none of the HP drivers will fully install.
    I will be happy to help you.
    Are you signed in as the Administrator of the computer?
    I would turn off all start up programs to make sure there isn't something blocking the printer.
    Click on start, in the search box type in run, enter, then type in msconfig, click OK.
    Click the Services tab.
    Click to select the Hide All Microsoft Services check box.
    Click Disable All, and then click OK.
    Then click on the start up tab at the top.
    Click on disable all.
    Reboot the computer.
    Temporarily turn off any Antivirus software.
    Then run the installation again by right clicking on the setup and selecting run as Admininstrator.
    Don't connect the USB cable until prompted.
    Try printing now.
    Then go back into msconfig and enable the All Microsoft Services and enable all on the start up tab.
    Turn the Antivirus software back on again.
    Please let me know the results if you are still having issues.
    Are you getting any error messages?
    Thank you for posting on the HP Forums.
    Have a nice day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Why isn't the App Store ID the same as my changed ID in Itunes?  Help please.

    I have a new email address.  I've changed my email address in Itunes and it shows the new address.  When I try to get apps from the App Store it shows my old email address and won't allow me in. Why is the Apple ID in the App store still my old one when I tunes shows my new one?
    Thanks. mpar1985

    Search before posting next time.  Questions regarding the store ID have been asked and answered dozens of times already.

  • Can I upgrade from an os1 to a 5?

    Can I upgrade from an os1 to a 5.

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Can I upgrade from acrobat 9 windows to XI mac version?

    Hello, like the title says: Can I upgrade from acrobat 9 windows to XI mac version?; I actually have an acrobat 9 pro version for windows, but I want to upgrade to acrobat XI for mac, is this posible?. Thanks!

    Hi ,
    Welcome to Adobe Forums..!!
    Yes, you can upgrade from Acrobat 9 for Windows to Acrobat XI for MAc .
    Kindly visit this website :-
    http://www.adobe.com/products/acrobatpro.html
    Click on Buy
    It will display the following options:-
    I want to buy: Upgrade
    I own: Select Product
    Platform:Windows
    Language:English
    Select Acrobat 9 PRO/Std from the I Own section .
    Select Platform : Mac
    Cick on Add to cart.
    Place the order.
    Let us knw if it helps..!!
    Thanks
    Tanvi

  • IMove 9... Project cannot locate clips after I chose "Split Event Before Clip." Help please!

    iMovie 9; chose "Spit Event Before Clip." Project now cannot locate Event clips for that Project. All Events and Clips are on an extenal HD. All I see are !-points for all clips in the Project. Help!
    I noticed another Event folder for the same clips so I "Merged" them. Still nothing. I've had nothing but problems with the waaay overdue project. I really need some help, please!
    gb

    I'd even gladly pay someone to walk me through this on the phone! I'm really desperate at this point!
    gb

  • Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"

    Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"

    After the iOS 7.0.2 update words with friends is not working for me either. When I attempt to open the app it just closes itself after a few seconds of being open. This happens every time I attempt to open it.

  • Recently updated my iphone 4s software. now it won't sync w/ itunes, says i need updated itunes. i updated itunes... now it says that my desktop software is old and can't run new itunes. Yet, i cant update my computer either. PLEASE HELP!!!! UGHH

    recently updated my iphone 4s software. now it won't sync w/ itunes, says i need updated itunes. i updated itunes... now it says that my desktop software is old and can't run new itunes. Yet, i cant update my computer either. PLEASE HELP!!!! UGHH

    Why can't you update your computer operating system ("desktop software")? What software would that be?

  • TS4062 restored iphone from icloud so I could have all my old photos but now I cannot get it to restore or sync with itunes either by cable or by wifi. I have tried with automatic download off/on, I have had red circles, hours of syncing, nothing, help!!

    restored iphone from icloud so I could have all my old photos but now I cannot get it to restore or sync with itunes either by cable or by wifi. I have tried with automatic download off/on, I have had red circles, hours of syncing, nothing, help!!

    Seems to be a common issue in discussions. Try this:
    http://support.apple.com/kb/ts1538
    And let me know if it helps,

  • I can't upgrade from iOS 5 to 6

    I am having trouble I can't upgrade from iOS 5 to 6?

    1st gen iPad can not run anything later than iOS 5.1.1.
    What generation iPad do you have?

  • I can not upgrade from 10.2 to 10.6 because of missing "itunes.msi" file.  How do I repair it? I can not remove itunes and start over.

    I can not upgrade from 10.2 to 10.6 because of missing "itunes.msi" file.  I can not delete ITunes and start over either.

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • HT201210 i bought a iphone 3g from market yesterday and the phone is showing a usb an also itunes logo on the screen, the ive tryed restore and update, but once this has finished it gives me erra code (1015) can anybody help me plz

    i bought a iphone 3g from market yesterday and the phone is showing a usb an also itunes logo on the screen, the ive tryed restore and update, but once this has finished it gives me erra code (1015) can anybody help me plz

    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    http://support.apple.com/kb/TS3694#error1015.

  • Can you upgrade from Os x 10.4 to 10.5 or higher?

    Can you upgrade from Os x 10.4 to 10.5 or higher?

    Because you have a Core Duo model you are limited to Snow Leopard. You already have the maximum RAM for your model. All you need do is purchase the Snow Leopard DVD from Apple's Online Store - $29.00.
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

Maybe you are looking for

  • Req: to show values of a poplist dependent on values of another poplist

    Hi, I have a requirement to show values of a poplist(poplist2) based on the values selected from another poplist(poplist1). Ex : when A is selected from poplist1 , poplist2 should show 1 and 2 as values. When B,C are selected from poplist1, poplist2

  • How come the lastest version of Firefox dosen't support ZoneAlarm?

    This is the first time I've been unable to upgrade to that latest version of Firefox, because it's telling me it doesn't support Zone Alarm.

  • HR infotype 0032 screen issue

    When I 'create' an infotype 0032 record I get 1 field i.e. 'Previous Personnel No.'. When I go to overview mode there are many other fields i.e. 'Rule', 'Car Value', 'Plate No', 'Asset Number', etc. How do I maintain or change the entries for the fie

  • Aprz Shell

    Well, ever since I switched to Linux, I've been interested in os development. An important part of the operating system is the shell. So recently, I decided to write my own shell, which I hope I can make featureful and robust enough to use in place o

  • Unable to create system performance counter SharePoint Disk-Based Cache - SharePoint 2010 SP2 Farm

    Hi, I'm getting this in my Trace Logs: Performance Counter OS (pdh) call failed with error code PDH_CSTATUS_BAD_COUNTERNAME PDH failure on counter <serverName>\Sharepoint Disk-Based Cache\Blob Cache hit ration with Unknown error (0x0000bc0) Unable to